Golf Ball Hat-Tac

FINAL SALE

Made in the USA

Never again worry about your hats becoming misshapen, sagging, or losing their curve, thanks to the Golf Ball Hat-Tac. This revolutionary invention sticks to any surface thanks to the 3M foam adhesive backing, and the fixed curve platform allows hats to comfortably rest in an upright position. With this patented and trademarked design, your ball cap, fedora, or any other piece of headwear will never lose its curve. This is the perfect place to hang your hat!

Approx.
45.5 mm High
97 mm Wide
50 mm Deep

Made in the USA
3M Foam Adhesive Backing
Fixed Curve Platform
Golf Ball and Putting Green Print
Sturdy and Reliable

Works for Hats of All Sizes

Manufacturer Instructions for How to Apply:

1. Prep surface: Take a soft wash cloth with Isopropyl or similar alcohol cleaner to create a nice clean surface for the HAT-TAC™ to stick onto.
   Our recommendation is to find a smooth clean surface with little texture. 
2. After prepping the surface: Grab the tab sticking out and peel away the red backing with ease. HAT-TAC™ attaches to the wall using a foam medium hold double sided adhesive. 
3. Position: Align your HAT-TAC™ a few centimeters off the wall, making sure to the top so is perfectly level. 
4. Last step: Push softly, just enough to hold the HAT-TAC™ in place on the surface. Take a few steps back to make sure it is exactly where you want it positioned. 
   If the positioning is perfect, push and hold the back side of the HAT-TAC™ to the wall firmly for 30 seconds then wait 30 minutes before hanging a hat. 

Manufacturer Instructions for How to Remove:

1. Step One: Firmly grab each side of the HAT-TAC™ with both hands. 
2. Step Two: Slowly wiggle the HAT-TAC™ up and down to separate the adhesive back from the wall. 
   Be careful during this step as removing too fast or incorrectly could peel paint.  

FINAL SALE