Close
|
Italian Straw Skimmer Hat |
---|
Made in Italy Although superseded by the Panama hat in this century, the Skimmer was for many decades the man's straw hat of choice. The Italian Skimmer by Capas is Made in Italy from 4-ply Koberg straw. This is an authentic, high quality Skimmer hat often assiciated with barber shop quartets, jazz bands, and the like. (Also known as a Boater or Sailor). Approx. 3 1/2" Flat Top Crown 2 1/4" Flat Brim Made of: 100% 4-Ply Koberg Straw Striped Hat Band with Side Bow Firm/Stiff Body Leather Sweatband Lined Sizes: Fitted - Sizes 6 7/8 (S) to 7 3/4 (XXL); fits true to size. |
Close
|
3-Pleat Cotton Puggaree Hat Band |
---|
A new hat band can do wonders to freshen up any old hat, may we suggest the 3-Pleat Cotton Puggaree Hat Band by Capas Headwear. Featuring a multitude of great colors, this pug hat band is made of 100% cotton. Need to dress your hat up in something new? Look no further than the 3-Pleat Cotton Puggaree Hat Band - a fresh new look to your favorite hat! For best results, please follow all instructions for use (below). *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. Approx. 28" Total Length, End to End 1 7/8" Width Made of: 100% Cotton 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! |
Close
|
T3 Cotton Duck Booney Hat - Khaki |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection The T3 is the most sought after Tilley Hat - made of classic cotton duck canvas in the traditional "Aussie" style with a versatile snap-up brim. The original design has 40 years of history, make sure to pay homage with your very own T3. Approx. 4" Crown 2 3/4" Front/Back Brim 2 3/8" Side Brim Made of: 100% Cotton Duck Features: * Guaranteed for life. * Certified sun protection - delivers an UPf of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Keep it on in windy conditions through the wind cord & size cinch system. * Secure your Hat during a steep incline with rear brim loop for clip - loop also holds wind cords when not in use. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Buoyancy - stays afloat in water. * Weighs 5.4 oz/153 grams. * DWR (Durable Water Repellent) Finish. * British brass grommets. * OEKO-TEX® Certification. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Sizes: 6 7/8 (S) - 7 7/8 (XXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
Cotton Hat Sizer |
---|
Please Note: This item sells as a SINGLE sizing strip in either Black or White. Made in the USA Find yourself in-between hat sizes? Need a better fit? Prefer the added comfort of a cotton sweatband? All this can be achieved with the Cap-Ban-Nu Cotton Hat Sizer ideal for sizing your hat down by half a size! For best results, please follow all instructions for use (below). Instructions: * Remove tape backing from product. * Stick to the front section of the hat's sweatband or whatever area the hat has a loose fit (front, back or sides). You can also place the sizer behind the sweatband, directly onto the hat, or onto the backside of the sweatband. * Discard the used strip when soiled and replace. Approx. 10 3/4" Length 1" Width 2.5 MM Thick Made of: 100% Cotton Jersey Size: One single sizer per pack. One Size Fits Most. |
Close
|
T3 Cotton Duck Booney Hat - Natural |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection The T3 is the most sought after Tilley Endurables hat, the originale with 40 years of history to back it up. Made of classic cotton duck canvas in the unique booney style with a versatile snap-up brim. Approx. 4" Flat Crown 2 3/4" Brim - Front & Back 2 3/8" Brim - Sides Made of: 100% Cotton Duck Features: * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Keep it on in windy conditions through the wind cord & size cinch system. * Secure your Hat during a steep incline with rear brim loop for clip - loop also holds wind cords when not in use. * Hydrofil® anti-sweat band to wick away moisture. * Weighs 5.4 oz/153 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) Finish. * Double Snap-Up Brim. * British Brass Grommets. * OEKO-TEX® certification. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Size(s): 6 7/8 (S) - 8+ (XXXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
3-Pleat Satin Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a multitude of great colors, the 3-Pleat Satin Puggaree Hat Band will give a fresh new look to your favorite hat. For best results, please follow all instructions for use (below). Approx. 28" Total Length, End to End 2" Width Made of: 100% Satin 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Jungle Cruise Frank Captain Hat |
---|
With Disney's Jungle Cruise Frank Captain Hat you can step into the latest Disney film and become one of the crew. Featuring a classic fiddler's cap silhouette, the preferred hat style of riverboat captain, Frank Wolff. Includes all character-accurate details...including the faux leather hat band, metal side buttons and smooth faux leather bill. Approx. 2 1/2" Crown 2 1/2" Flexible Bill/Visor Made of: 100% Polyester Officially Licensed Faux Leather Hat Band Metal Side Buttons Faux Leather Bill Elasticized at Back Breathable Lining Size(s): One Size Fits Most - Fits comfortably up to size 7 3/8 (L). |
Close
|
Hoquy Wool Basque Beret |
---|
Made in France - Exclusive to the US Please Note: The Navy Blue color is deep and dark in tone. The iconic Hoquy Beret is known all over the world, made by Héritage par Laulhère, a company that has been in existence since 1840. The design studio and workshops are all located within the foothills of the French Pyrenees, the very last of the producers of the beret in Oloron-Ste-Marie. The origin of the "Basque" beret is actually from the Bearn Shepherds of the same name, Bearn. They first hand knit the beret and then felted the wool in mountain waters to create a hat that protects against the sun and harsh winters. Basque became the more popular term when Napoleon III, noticed it upon the laborers working on his Palais de Biarritz. The quality of the workmanship is evident in this simple but elegant beret. The merino wool is soft but durable and water resistant. The luxe foulard finish to the wool is a characteristic unique only to Héritage par Laulhère's luxe line of Basque berets, including the Hoquy. Approx. 10 1/2" Diameter Measured from size 56cm - diameters are proportional to beret size. Made of: 100% Pure Merino Wool Made in France - Exclusive to the US Impermeable - Water Resistant Cabillou - Center Top Tassel Héritage par Laulhère Side Pin Goat Leather Sweatband with Contrast Leather Piping Satin Lining Custom Hoquy Sewn Inner Label Luxury Box Sizes: 55cm - 64cm; general hat sizes 6 7/8 (S) - 8 (XXXL); fits true to size. |
Close
|
Cardiff Cotton Herringbone Newsboy Cap |
---|
Limited Edition Simple and effective, perfect for spring days ahead, the Cardiff Cotton Herringbone Newsboy Cap by Baskerville Hat Company. Made of 100% Japanese cotton, this is a herringbone cap that can easily be paired with any outfit. The bill has a single snap feature and the interior boasts a cool satin lining along with a grosgrain ribbon sweatband. Approx. 9 1/2" Front to Back, Flat 10" Side to Side, Flat 1 3/4" Single Snap Bill Made of: 100% Japanese Cotton Limited Edition Herringbone Pattern Classic Newsboy Design - 8 Panel Top Button Grosgrain Ribbon Sweatband Satin Lining Size(s): S, M, L, XL, and XXL; runs true to size. For B2B/Wholesale purchase of this style, CLICK HERE or call us at 1-888-847-4287. |
Close
|
Paisley 3-Pleat Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a classic paisley print in varying colors, the Paisley 3-Pleat Puggaree Hat Band by Capas Headwear will give a colorful new twist to your favorite hat. For best results, please follow all instructions for use (below). Approx. 29" Total Length, End to End 1 7/8" Width Made of: 100% Polyester 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
LTM6 Airflo Hat - Khaki/Olive |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection The Tilley LTM6 AIRFLO® Hat is made from a lightweight 100% recycled nylon with a UPF50+ rating. The bluesign® approved fabric provides excellent UV protection while the mesh surrounding the top of the crown allows for incredible breathability. Approx. 4 3/8" Crown 3 1/4" Front/Back Brim 2 1/2" Side Brim Made of: Body - 100% Recycled Nylon Mesh - 100% Polyester Features: * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Underbrim reduces glare from most surfaces. * Keep it on in windy conditions through the wind cord & size cinch system. * Secure your Hat during a steep incline with rear brim loop for clip - loop also holds wind cords when not in use. * Ventilation through mesh insert around the top of the crown. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Lightweight, weighs 4 oz/113 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) Finish. * bluesign® Approved Fabric. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Sizes: 6 7/8 (S) - 8+ (XXXL);Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
LTM6 Airflo - Olive Green |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection The Tilley LTM6 AIRFLO® Hat is made from a lightweight 100% recycled nylon with a UPF50+ rating. The bluesign® approved fabric provides excellent UV protection while the mesh surrounding the top of the crown allows for incredible breathability. Approx. 4 3/8" Crown 3 1/4" Front/Back Brim 2 1/2" Side Brim Made of: Body - 100% Nylon Mesh - 100% Polyester Features: * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Underbrim reduces glare from most surfaces. * Keep it on in windy conditions through the wind cord & size cinch system. * Secure your Hat during a steep incline with rear brim loop for clip - loop also holds wind cords when not in use. * Ventilation through mesh insert around the top of the crown. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Lightweight, weighs 4 oz/113 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) finish. * bluesign® Approved. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Sizes: 6 7/8 (S) - 8+ (XXXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file an insurance claim, please click here to be directed to the Tilley returns and exchange page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
Terry Cloth Hat Sizer |
---|
Please Note: This item sells as a SINGLE sizing strip in either Black or Tan. Made in the USA Find yourself in-between hat sizes? Need a better fit? Prefer the added comfort of a terry cloth sweatband? All this can be achieved with the Cap-Ban-Nu Terry Cloth Hat Sizer that can size your hat down half a size! For best results, please follow all instructions for use (below). Instructions: * Remove tape backing from product. * Stick to the front section of the hat's sweatband or whatever area the hat has a loose fit (front, back or sides). You can also place the sizer behind the sweatband, directly onto the hat, or onto the backside of the sweatband. * Discard the used strip when soiled and replace. Approx. 10 3/4" Length 1 1/8" Width 5 MM Thick Made of: 100% Cotton Terry Cloth Size: One single sizer per pack. One Size Fits Most. |
Close
|
Pirates of the Caribbean Jack Sparrow Tricorn Hat |
---|
"Yo Ho, Yo Ho, a pirate's life for me..." Captain Jack Sparrow has his own fan club here at the Village Hat Shop, we think Johnny Depp is simply the 'bee's knees". The Pirates of the Caribbean Jack Sparrow Tricorn Hat is officially licensed and crafted to look just like Jack Sparrow's hat in the movies. Now you're ready to sail the seven seas and search for your buried treasure! Approx. 6" High 14 1/2" Wide Made of: 100% Polyester Officially Licensed Distressed Gold Color Wire Edge Brim - Shape to your Liking! Elasticized Sweatband Unlined Size: One Size Fits Most - Fits up to size 7 1/4 (L) comfortably. |
Close
|
TWS1 Paddler Hat - Stone |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection You're ready for any adventure with the TWS1 All Weather Hat from Tilley! This outdoor hat is perfect for any trek, in or out of water. The TWS1 All Weather Hat is ready keep you comfortable with the Schoeller 3x dry fabric C-Change membrane to control temperature when out in the sun, wind, and rain. The best part? It's also very comfortable! Approx. 3 1/4" Crown 2 3/4" Front/Back Brim 2 3/8" Side Brim Made of: 73% Polyester Schoeller® Technologies ecorepel® 27% Polyurethane Schoeller® Technologies ecorepel® Features: * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Underbrim reduces glare from most surfaces. * Wind stability through an extra stiff front brim & plastic wiring around the whole brim. * Keep it on in windy conditions through the wind cord & size cinch system. * Reflective yarns in the wind cords to increase visibility at dusk & dawn. * Secure your Hat while portaging with rear brim loop for clip - loop also holds wind cords when not in use. * Temperature is regulated with Schoeller® Fabric c_change® membrane. * Ventilation through a back vent & side grommets. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Lightweight, weighs 3.2 oz/91 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) finish. * Snap up sides for added wind stability & for added style. * Machine wash cool water, delicate cycle or hand wash; Reshape & air-dry. Size(s): 7 (M) - 7 7/8 (XXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
LTM8 Airflo Mesh Crown Hat |
---|
UPF 50+ Sun Protection The Tilley LTM8 Airflo Mesh Crown Hat is from a lightweight material with a UPF 50+ rating. The bluesign® approved fabric provides excellent UV protection while the mesh surrounding the top of the crown allows for incredible breathability. Approx. 3 3/4" Flat Teardrop Crown 3 1/8" Stitched Flat Brim Made of: Body - 100% Nylon Mesh - 100% Polyester Features: * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Keep it on in windy conditions through the wind cord & size cinch system. * Ventilation through mesh insert around the top of the crown. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Lightweight, weighs 4 oz/113 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) finish. * bluesign® Approved. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Sizes: 6 7/8 (S) - 8+ (XXXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file an insurance claim, please click here to be directed to the Tilley returns and exchange page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
LTM5 Airflo Hat - Stone |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection The Tilley LTM5 AIRFLO® Hat is designed with a medium brim and polyester mesh in the crown for coolness and comfort during hot days and strenuous activities. The LTM5 AIRFLO® is similar to the LTM6 but has a slimmer profile but the same water repellent finish. Approx. 3 3/4" Crown 2 5/8" Front Brim 2 3/4" Back Brim 2 1/8" Side Brims Made of: Body - 100% Nylon Mesh - 100% Polyester Features: * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks. 98% of harmful UVA/UVB radiation. * Keep it on in windy conditions through the wind cord & size cinch system. * Secure your Hat during a steep incline with rear brim loop for clip - loop also holds wind cords when not in use. * Ventilation through mesh insert around the top of the crown. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Weighs 3 oz/85 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) Finish. * bluesign® Approved. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Sizes: 6 7/8 (S) - 8+ (XXXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
Ultralight DWR Sunshield Neck Flap Baseball Cap |
---|
UPF 50+ Sun Protection The Ultralight DWR Sunshield Neck Flap Baseball Cap is a modern 5-panel design by Tilley Endurables. Has UPF 50+ sun protection, is water repellent, and if that wasn't enough, it also features a removable sun shield cape. Designed for function, this cap also has ventilation eyelets, a DWR finish and an adjustable strap at the back so you can find your best fit. Approx. 2 1/2" 5 Panel Crown 2 3/4" Curved Bill Made of: 94% Recycled Nylon 6% Elastane UPF 50+ Sun Protection Designed in Canada DWR Finish - Durable Water Repellent Quick Drying Eyelets for Ventilation Removable Sun Shield Cape Adjustable Strap - Back Anti-Sweat Sweatband Inseam Taping Mesh Lining Size(s): S/M and L/XL; fits true to size. |
Close
|
Waterproof Rain Hat |
---|
Please Note: Sizes run small. See below or call us at 1-888-847-4287 for help with sizing. S = 6 3/4 M = 7 L = 7 1/4 XL = 7 1/2 UPF 50+ Sun Protection Tilley Endurables has taken the basic boonie to the next level with the Waterproof Rain Hat. The seam sealed construction makes this hat rain proof and wind proof, a double whammy when it comes to inclement weather. The snap-up sides help for a more streamlined silhouette and the adjustable reflective wind cord allows for a custom fit. Approx. 3 1/2" Crown 2 1/2" Front/Back Brim 2 1/4" Side Brim Made of: 73% Polyester 27% Polyurethane Features: * Designed in Canada. * UPF 50+ Sun Protection - Tested and Certified. * Rain and Wind Proof - Moisture Wicking and Durable Water Repellency. * DWR (Durable Water Repellent) finish. * Seam Sealed. * Keep it on in windy conditions through the wind cord & size cinch system. * Reflective yarns in the elasticized wind cords to increase visibility at dusk & dawn. * Adjustable Wind Cord with Metal Toggle - For Windy Conditions * Secure your Hat while portaging with rear brim loop for clip - loop also holds wind cords when not in use. * Temperature is regulated with Schoeller® Fabric c_change® membrane. * Hydrofil® anti-sweat band to wick away moisture. * Quick Drying. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Buoyancy - stays afloat in water. * Snap up sides for added wind stability & for added style. * Mesh Lining. * Machine wash cool water, delicate cycle or hand wash; Reshape & air-dry. * Tilley Side Tag. Size(s): S, M, L, and XL; ; runs small, please see disclaimer at the top of the product description. |
Close
|
Seagrass Straw Ascot Cap |
---|
Please Note: This style runs large, see sizing details below or call us at 1-888-847-4287 for help with sizing. S = 7 M = 7 1/4 L = 7 1/2 XL = 7 3/4 Incredibly breathable and lightweight, the Seagrass Straw Ascot Cap by Capas Headwear is unique among straw caps. Featuring an open weave twisted seagrass straw body, this ascot provides shading from the sun while maximizing ventilation. Natural seagrass possesses wonderful color variation that gives the cap a uniquely organic and relaxed look. Approx. 10" Length 8" Width 2" Brim/Bill (Measured from size M) Made of: 100% Seagrass Straw Open Weave Twisted Seagrass Straw Body Cotton Sweatband Unlined Sizes: S, M, L and XL. Sizing runs large, see sizing disclaimer at top of description. |
Close
|
TH5 Hemp Hat |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection Made in Canada The TH5 Hemp Hat from TIlley Endurables is natural and tough, built for endurance and longevity. Hemp fabric is very much like cotton, so it breathes extremely well. The nature of this fabric is that it does fade with continuous sun exposure, creating a more unique hat as time goes by. Approx. 3 3/4" Crown 2 5/8" Front Brim 2 3/4" Back Brim 2 1/8" Side Brims Made of: 100% Hemp Fabric Features: * Made in Canada. * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks. 98% of harmful UVA/UVB radiation. * Keep it on in windy conditions through the wind cord & size cinch system. * Secure your Hat during a steep incline with rear brim loop for clip - loop also holds wind cords when not in use. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Weighs 5 oz/150 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) Finish. * OEKO-TEX® certification. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Sizes: 7 (M) - 7 7/8 (XXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
Sloane Wool Shadow Windowpane Ivy Cap |
---|
Limited Edition Sleek and sharp, the Sloane Wool Shadow Windowpane Ivy Cap from the Baskerville Hat Company keeps it clean. The grosgrain ribbon sweatband and satin lining are neat touches that make this hat absolute perfection. The snap brim allows for serious versatility with this serious cap. Approx. 7 1/2" Diameter 1 1/2" Single Snap Bill Made of: 100% Japanese Wool Limited Edition Pre-Curved Bill/Visor Grosgrain Ribbon Sweatband Satin Lining Size(s): S, M, L, XL and XXL - Fits true to size. For Bulk/Wholesale purchase of this hat, CLICK HERE or call us at 1-888-847-4287. |
Close
|
Reading Mixed Herringbone Cotton Newsboy Cap |
---|
Limited Edition We love a newsboy in cotton... the Reading Mixed Herringbone Cotton Newsboy Cap by Baskerville Hat Company! Made of 100% Japanese cotton with a classic herringbone pattern in neutral tones. The beauty of cotton is that it is lightweight and breathable, making the Reading perfect for spring and summer. Approx. 9" Front to Back, Flat 10" Side to Side, Flat 1 5/8" Single Snap Bill Made of: 100% Japanese Cotton Limited Edition Herringbone Pattern Classic Newsboy Design - 8 Panel Top Button Grosgrain Ribbon Sweatband Satin Lining Size(s): S, M, L, XL, and XXL; runs true to size. For B2B/Wholesale purchase of this style, CLICK HERE or call us at 1-888-847-4287. |
Close
|
LTM3 Airflo Hat - Black |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection The Tilley LTM3 AIRFLO® Hat offers the beloved shape of the T3 Hat with Tilley's incredibly durable UPF 50+ nylon fabric with mesh ventilation around its crown for added breathability. Just like the T3, the LTM3 boasts a snap-up brim and classic "Aussie" styling. Approx. 4" Crown 2 3/4" Front/Back Brim 2 3/8" Side Brim Made of: 100% Nylon Features: * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Underbrim reduces glare from most surfaces. * Keep it on in windy conditions through the wind cord & size cinch system. * Secure your Hat during a steep incline with rear brim loop for clip - loop also holds wind cords when not in use. * Ventilation through mesh insert around the top of the crown. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Weighs 4 oz/113 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) Finish. * bluesign® Approved. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Size(s): 7 (M) - 7 7/8 (XXL);Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
Pirates of the Caribbean Blackbeard Tricorn Hat |
---|
Argh, matey! Known to have the blackest soul and the darkest heart of any pirate who ever lived, Blackbeard stroke fear into the bravest of sailors! Approx. 4 1/4" Crown 5 1/4" Up-turned Brim Made of: 100% Polyester Elasticized Terry Cloth Sweatband Grosgrain Ribbon Bound Brim Brass Button Detail Faux Leather Metallic Gold Trim Size: One Size Fits Most - Fits up to size 7 1/4 (L) comfortably. |
Close
|
LTM3 Airflo Hat - Khaki/Olive |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection The Tilley LTM3 AIRFLO® Hat offers the beloved shape of the T3 Hat with Tilley's incredibly lightweight and durable UPF 50+ nylon fabric with mesh ventilation around its crown for added breathability. Just like the T3, the LTM3 boasts a snap-up brim and classic "Aussie" styling. Approx. 4" Crown 2 3/4" Front/Back Brim 2 3/8" Side Brim Made of: Body - 100% Nylon Mesh - 100% Polyester Features: * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Underbrim reduces glare from most surfaces. * Keep it on in windy conditions through the wind cord & size cinch system. * Secure your Hat during a steep incline with rear brim loop for clip - loop also holds wind cords when not in use. * Ventilation through mesh insert around the top of the crown. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Weighs 4 oz/113 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) Finish. * bluesign® Approved. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Sizes: 6 7/8 (S) - 7 7/8 (XXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
Authentique Classic Wool Beret |
---|
Please Note: Laulhere have recently rebranded their items, some pieces will have a satin lining while others will have a cotton lining, linings cannot be selected. Made in France Based in Oloron-Sainte-Marie at the foothills of the Pyrenees, Héritage par Laulhère has withstood the test of time and remains the very last producer of the beret in the region. Since 1840, Héritage par Laulhère's design studio and workshops have remained in their original locations and continue to uphold tradition, quality, culture and heritage above all else. To Héritage par Laulhère, the words "Made in France" remain a proud statement and a promise of the highest quality. The Authentique Classic Wool Beret by Héritage par Laulhère is our newest addition to their line of classic, authentic and traditionally-crafted berets. A simple design; the Authentique is crafted of water-resistant merino wool and features a classic top tassel, sewn inner label, and Héritage par Laulhère side pin. Ideal for men or women, the Authentique is available in a medley of colors for a stylish finish to all your looks! Approx. 11" Diameter Made of: 100% Merino Wool Made in France Merino Wool Water Resistant Héritage par Laulhère Side Pin Cabillou - Center Top Tassel Héritage par Laulhère Label Lined Packable & Crushable Size: One Size Fits Most - Fits sizes 6 3/4 (XS) - 7 1/4 (L) comfortably. |
Close
|
Leather Greek Fisherman's Cap |
---|
Made in Greece Capas Headwear is giving the fisherman's cap some street credit with a leather body in their latest fall headpiece, the Leather Greek Fisherman's Cap. Made of genuine leather, details include a double-layered cord hat band, decorative bill accent, leather sweatband and satin lining. A practical design this cap is dressed up for a night on the town. Approx. 1 7/8" Soft Crown 3/4" Structured Band 2 1/8" Bill/Visor Made of: 100% Leather Double-Layered Cord Hat Band Leather Side Buttons Decorative Bill Accent Leather Sweatband Satin Lining Sizes: S, M, L and XL; fits true to size. |
USA: 1-888-VHS-HATS (1-888-847-4287)
INT'L: +1 619-906-4440 Se habla español
Shop for Hats at VillageHatShop.com | Privacy Policy | Website Accessibility | Site Map
Copyright © 1999-2020 Village Hat Shop: The #1 Source for Hats Online
*ALL SPECIAL OFFERS AND DISCOUNTS
Excludes wholesale/B2B, Certain Brand Restrictions, Special Orders or Where Otherwise Noted.
CONTACT USWe are happy to help! |
1 (888) 847-4287Mon-Sun 8am-4:00pm |