Close
|
Italian Straw Skimmer Hat |
---|
Made in Italy Although superseded by the Panama hat in this century, the Skimmer was for many decades the man's straw hat of choice. The Italian Skimmer by Capas is Made in Italy from 4-ply Koberg straw. This is an authentic, high quality Skimmer hat often assiciated with barber shop quartets, jazz bands, and the like. (Also known as a Boater or Sailor). Approx. 3 1/2" Flat Top Crown 2 1/4" Flat Brim Made of: 100% 4-Ply Koberg Straw Striped Hat Band with Side Bow Firm/Stiff Body Leather Sweatband Lined Sizes: Fitted - Sizes 6 7/8 (S) to 7 3/4 (XXL); fits true to size. |
Close
|
3-Pleat Cotton Puggaree Hat Band |
---|
A new hat band can do wonders to freshen up any old hat, may we suggest the 3-Pleat Cotton Puggaree Hat Band by Capas Headwear. Featuring a multitude of great colors, this pug hat band is made of 100% cotton. Need to dress your hat up in something new? Look no further than the 3-Pleat Cotton Puggaree Hat Band - a fresh new look to your favorite hat! For best results, please follow all instructions for use (below). *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. Approx. 28" Total Length, End to End 1 7/8" Width Made of: 100% Cotton 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! |
Close
|
3-Pleat Satin Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a multitude of great colors, the 3-Pleat Satin Puggaree Hat Band will give a fresh new look to your favorite hat. For best results, please follow all instructions for use (below). Approx. 28" Total Length, End to End 2" Width Made of: 100% Satin 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Paisley 3-Pleat Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a classic paisley print in varying colors, the Paisley 3-Pleat Puggaree Hat Band by Capas Headwear will give a colorful new twist to your favorite hat. For best results, please follow all instructions for use (below). Approx. 29" Total Length, End to End 1 7/8" Width Made of: 100% Polyester 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
The McKenzie Waxed Cotton Outback Hat |
---|
Please Note: Sizing for this style runs large. See below or call us at 1-888-847-4287 for help with sizing. S = 7 - 7 1/8 M = 7 1/4 L = 7 3/8 - 7 1/2 XL = 7 5/8 XXL = 7 3/4 Made in New Zealand The McKenzie Waxed Cotton Outback Hat is a staple amongst New Zealand styles - a waxed cotton hat that can survive any type of climate. The McKenzie is made for an arid climate but will also serve the wearer well in the rain. This hat comes with a chinstrap and two ventilated eyelets on each side of the crown. Approx. 4 3/8" Teardrop Crown 3 1/4" Curved Brim Made of: 100% Australian Oilskin (Waxed Cotton) Made in New Zealand Four Ventilation Eyelets Adjustable Wind Cord Cotton Sweatband Water Resistant Size(s): S, M, L, XL and XXL; runs large, please see size disclaimer at top. |
Close
|
Havana Coffee Works Jute Duckbill Ivy Cap |
---|
Please Note: Coffee sack color/prints are random and cannot be selected. Made in New Zealand Hills Hats and Havana Coffee Works have collaborated together by recycling jute coffee sacks from around the world into a unique range of handcrafted headwear for coffee and hat lovers! Every Havana Coffee Works Jute Duckbill Ivy Cap is made from a random assortment of coffee sacks ensuring a variety of colors and prints. Approx. 2 3/4" Sewn Bill Made of: 100% Jute Coffee Sacks Made in New Zealand Hills Hats Side Pin Assorted Prints Cotton Sweatband Cotton Lining Sizes: S, M, L, XL and XXL; fits true to size. |
Close
|
The Milford Wax Cotton Fedora Hat |
---|
Please Note: Hills Hats of New Zealand no longer make the Milford with a side pin. To reflect this change, the side pin has been removed from the description below. Made in New Zealand The Milford Fedora Wax Cotton Fedora Hat is a structured water repellent hat made of British oilskin waxed cotton. Designed with a downward brim the Milford is detailed with 3 eyelets on each side for ventilation. Approx. 3 1/2" Center Pinch Crown 2 3/8" Floppy Brim Made of: 100% Australian Oilskin (Waxed Cotton) Water Resistant 3 Ventilation Eyelets on Each Side of Crown Cotton Sweatband Plaid Fabric Lining Size(s): S, M, L, XL, and XXL; fits true to size. |
Close
|
Merrik Cotton Newsboy Cap |
---|
Handmade Conner's Merrik Cotton Newsboy Cap is made from a lightweight and water resistant distressed cotton blend. Featuring a six-panel construction with sewn bill, the Merrik Cotton Newsboy Cap offers a low profile. Handmade to last - the Merrik Cotton Newsboy Cap by Conner looks even better with age! Approx. 9 1/2" Diameter (Flat) 1 7/8" Sewn Bill Made of: 52% Cotton 48% Polyester Handmade Six-Panel Construction Organic Cotton Sweatband with Elastic Terry at Front Unlined Crushable / Packable Sizes: S, M, L, XL, and XXL; fits true to size. |
Close
|
Havana Coffee Works Jute Pork Pie Hat |
---|
Please Note: Coffee sack color/prints are random and cannot be selected. Made in New Zealand Hills Hats and Havana Coffee Works have collaborated together by recycling jute coffee sacks from around the world into a unique range of handcrafted headwear for coffee and hat lovers! Every Havana Coffee Works Jute Pork Pie Hat is made from a random assortment of coffee sacks ensuring a variety of colors and prints. Approx. 3" Flat Top Crown 2" Snap Brim Made of: 100% Jute Coffee Sacks Made in New Zealand Hills Hats Side Pin Assorted Prints Cotton Sweatband Cotton Lining Sizes: S, M, L, XL and XXL; fits true to size. |
Close
|
Heritage Collection 1900s Homburg |
---|
Made in the USA About the time of Bollman Hat Company's Founder's death in 1900 and beginning of the leadership of his son George W. Bollman, the Homburg hat was taking its place in hat style history. Popularized in England by Edward VII after visiting Germany and bringing one back as a keepsake, the Homburg is one of the oldest formally-styled hats. As the King of England from 1901 to 1910, Edward was known as "The Peacemaker" for his efforts in fostering good relations between England and other European countries. Perhaps the Homburg was a perk of the King's diplomatic successes, but the style enjoyed its own surprising success in Great Britain and in America. The Homburg resurfaced in the 1970's as the "Godfather" and eventually became an early staple of the hip-hop movement. The Bollman Hat Company contributed its own color and flair during each phase of the Homburg's evolution. Bollman was integral to developing the style's current counter-cultural appeal by creating a variety of diverse colors including sugar pink, burnt orange, lime green and lemon yellow. Approx. 4 1/4" Center Dent Crown 2 3/4" Curled Brim Made of: 100% Wool Felt Printed Leather Sweatband Custom 140th Lining Sizes: S, M, L, and XL; fits true to size. |
Close
|
Havana Coffee Works Jute Mod Trilby Fedora Hat |
---|
Please Note: Coffee sack color/prints are random and cannot be selected. Made in New Zealand Hills Hats and Havana Coffee Works have collaborated together by recycling hemp coffee sacks from around the world into a unique range of handcrafted headwear for coffee and hat lovers! Every Havana Coffee Works Jute Mod Trilby Fedora Hat is made from a random assortment of coffee sacks ensuring a variety of colors and prints, making this a fun and stylish fedora. Approx. 4" Center Pinch Crown 2" Pre-Snap Brim Made of: 100% Jute Coffee Sacks Made in New Zealand Hills Hat Side Pin Assorted Prints Cotton Sweatband Cotton Lining Sizes: S, M, L, XL and XXL; fits true to size. |
Close
|
Weathered Cotton Bucket Hat |
---|
Conner's Weathered Cotton Bucket Hat is a great piece to take on any trip. It has two side grommets on the left and right side to help with ventilation. It can easily be thrown in a bag and at the ready any time. Approx. 3" Square Crown 2 1/4" Downturned Brim Made of: 52% Cotton 48% Polyester Cotton Sweatband Conner Side Pin Side Grommets Crushable/Packable Unlined Size: S, M, L and XL; fits true to size. |
Close
|
Tarpon Springs Floating Supplex Sailing Hat |
---|
Handmade The Tarpon Springs Floating Supplex Sailing Hat by Conner is an incredibly lightweight and completely crushable boating hat that also floats! Made of approximately 5 recycled plastic bottles, the Tarpon Springs Hat is eco-friendly in addition to all its great features. Fully functional and convenient, this hat boasts a ventilated mesh crown, an anti-glare under brim, adjustable chin cord with toggle as well as an organic cotton sweatband and secret inner-pouch complete with care instructions. Waterproof, shrink and fade-proof, the Tarpon Springs Floating Supplex Sailing Hat by Conner also comes with a handy clip system to keep your hat secure when not in use. Look no further for the perfect sailing, fishing or boating hat - the Tarpon Springs Floating Supplex Sailing Hat by Conner has all your needs covered! Approx. 3 1/2" Flat Top Crown 2 3/4" to 3 1/2" Downturned Brim Made of: 100% Supplex Nylon - From 100% Recycled Plastic Bottles Handmade Eco-Friendly - Made from Recycled Plastic Bottles! Ventilated Crown Adjustable Chincord Anti-glare Under Brim Organic Cotton Sweatband Organic Cotton Inner Pouch (with Care Instructions) Clip System to Secure Hat When Not in Use Waterproof Floats Shrink and Fade-Proof Crushable/Packable Sizes: S, M, L, XL, and XXL; fits true to size |
Close
|
The Squatter Waxed Cotton Booney Hat |
---|
Made in New Zealand The Squatter Waxed Cotton Booney Hat features genuine Australian oilskin (waxed cotton) in a classic booney design with a crushable crown. Water repellent, the wide brim will keep you protected and the chin cord with toggle will ensure a secure fit. Vertical side ventilation grommets will help keep your head cool. Approx. 3 1/2" Square Crown 3" Floppy Brim Made of: 100% Australian Oilskin (Waxed Cotton) Made in New Zealand Crushable Crown Two Ventilation Grommets per Side Adjustable Toggle Chincord Cotton Sweatband Brushed Cotton Lining Water Resistant Sizes: S, M, L, XL and XXL; fits true to size. |
Close
|
Seagrass Straw Ascot Cap |
---|
Please Note: This style runs large, see sizing details below or call us at 1-888-847-4287 for help with sizing. S = 7 M = 7 1/4 L = 7 1/2 XL = 7 3/4 Incredibly breathable and lightweight, the Seagrass Straw Ascot Cap by Capas Headwear is unique among straw caps. Featuring an open weave twisted seagrass straw body, this ascot provides shading from the sun while maximizing ventilation. Natural seagrass possesses wonderful color variation that gives the cap a uniquely organic and relaxed look. Approx. 10" Length 8" Width 2" Brim/Bill (Measured from size M) Made of: 100% Seagrass Straw Open Weave Twisted Seagrass Straw Body Cotton Sweatband Unlined Sizes: S, M, L and XL. Sizing runs large, see sizing disclaimer at top of description. |
Close
|
Steampunk Wool Felt Bowler Hat |
---|
Conner's Steampunk Wool Felt Bowler Hat is a great addition to your collection. The dramatic rolled brim and double layered hat band is a real attention getter. There is a removable pocket on the interior of the hat, you can store cash or simply remove the pocket, the choice is up to you. Approx. 4" Round Crown 2" Rolled Brim Made of: 100% Australian Wool Felt Cotton Sweatband Removable Inside Pocket Side Buttons Two Layer Hat Band Lined Sizes: S, M, L, XL, and XXL; fits true to size. |
Close
|
Heritage Collection 1930s Fur Felt Trilby Fedora Hat |
---|
Made in the USA The flamboyance and fast times of the 1920's gave way to a much more somber climate in the 1930's. The Stock Market Crash of 1929 ushered in a decade best remembered as a national crisis of unseen magnitude. What today is known as The Great Depression was undoubtedly a period of unparalleled uncertainty, but one that would instill great character and fortitude in the American public. As this major recession set in, fashion evolved likewise, resulting in a more modestly-styled look befitting the national mood. Bollman produced The Trilby which toned down the wide brim and softened the sharp lines of the Fedora. The Trilby or Snap Brim hat became the all purpose dress felt hat, cutting across class strata in America and Europe. To meet the demand, Bollman vertically integrated and began carbonizing and scouring the wool used in felt hats during this decade. Approx. 4" Center Dent Crown 1 7/8" Snap Brim Made of: 100% Genuine Fur Felt Made in the USA Grosgrain Ribbon Hat Band with Side Bow Side Feather Printed Leather Sweatband Stitched Edge Binding on Brim Custom 140th Lining Sizes: S, M, L, and XL; fits true to size. |
Close
|
Leather Greek Fisherman's Cap |
---|
Made in Greece Capas Headwear is giving the fisherman's cap some street credit with a leather body in their latest fall headpiece, the Leather Greek Fisherman's Cap. Made of genuine leather, details include a double-layered cord hat band, decorative bill accent, leather sweatband and satin lining. A practical design this cap is dressed up for a night on the town. Approx. 1 7/8" Soft Crown 3/4" Structured Band 2 1/8" Bill/Visor Made of: 100% Leather Double-Layered Cord Hat Band Leather Side Buttons Decorative Bill Accent Leather Sweatband Satin Lining Sizes: S, M, L and XL; fits true to size. |
Close
|
The Sou'wester Waxed Cotton Bucket Hat |
---|
Made in New Zealand Get the right amount of coverage with Hill Hats of New Zealand's Sou'wester Waxed Cotton Bucket Hat. Not only will you receive the durability and waterproofing properties that Hills Hats of New Zealand offers, the Sou'wester comes complete with an internal oilskin neck and ear flap protection that is lined in comfortable brushed cotton flannel to keep you warm from the elements. Approx. 4 1/4" Round Crown 2 7/8" Downturned Brim - Front 4 1/4" Downturned Brim - Back 3 1/2" Downturned Brim - Sides Made of: 100% Australian Oilskin (Waxed Cotton) Made in New Zealand 100% Australian Oilskin Brushed Cotton Flannel Lining Chin Cord Toggle and Keeper Internal Oilskin Neck and Ear Protection Flap Water Resistant Sizes: S, M, L, XL and XXL; fits true to size. |
Close
|
The Storm Waxed Cotton Bucket Hat |
---|
Made in New Zealand The Storm is a soft crushable crown bucket hat made of Australian oilskin waxed cotton. Water repellent, the hat is designed with self taped external seams and extra soft polar fleece lining for extra warmth. Approx. 3 1/2" Square Crown 2 1/4" Floppy Brim Made of: 100% Australian Oilskin (Waxed Cotton) Made in New Zealand Hills Hats Logo Patch Polar Fleece Lining Crushable Water Resistant Sizes: S, M, L, XL and XXL; fits true to size. |
Close
|
Golf Ball Hat-Tac |
---|
FINAL SALE Made in the USA Never again worry about your hats becoming misshapen, sagging, or losing their curve, thanks to the Golf Ball Hat-Tac. This revolutionary invention sticks to any surface thanks to the 3M foam adhesive backing, and the fixed curve platform allows hats to comfortably rest in an upright position. With this patented and trademarked design, your ball cap, fedora, or any other piece of headwear will never lose its curve. This is the perfect place to hang your hat! Approx. 45.5 mm High 97 mm Wide 50 mm Deep Made in the USA 3M Foam Adhesive Backing Fixed Curve Platform Golf Ball and Putting Green Print Sturdy and Reliable Works for Hats of All Sizes Manufacturer Instructions for How to Apply: * Prep surface: Take a soft wash cloth with Isopropyl or similar alcohol cleaner to create a nice clean surface for the HAT-TAC™ to stick onto. Our recommendation is to find a smooth clean surface with little texture. * After prepping the surface: Grab the tab sticking out and peel away the red backing with ease. HAT-TAC™ attaches to the wall using a foam medium hold double sided adhesive. * Position: Align your HAT-TAC™ a few centimeters off the wall, making sure to the top so is perfectly level. * Last step: Push softly, just enough to hold the HAT-TAC™ in place on the surface. Take a few steps back to make sure it is exactly where you want it positioned. If the positioning is perfect, push and hold the back side of the HAT-TAC™ to the wall firmly for 30 seconds then wait 30 minutes before hanging a hat. Manufacturer Instructions for How to Remove: * Step One: Firmly grab each side of the HAT-TAC™ with both hands. * Step Two: Slowly wiggle the HAT-TAC™ up and down to separate the adhesive back from the wall. Be careful during this step as removing too fast or incorrectly could peel paint. FINAL SALE |
Close
|
Havana Coffee Works Jute Gulf Cadet Cap |
---|
Please Note: Coffee sack color/prints are random and cannot be selected. Made in New Zealand Hills Hats and Havana Coffee Works have collaborated together by recycling jute coffee sacks from around the world into a unique range of handcrafted headwear for coffee and hat lovers! Every Havana Coffee Works Gulf Cadet Cap is made from a random assortment of coffee sacks ensuring a variety of colors and prints, making this a fun and stylish cadet cap. Approx. 3" Crown 2 1/2" Bill Made of: 100% Jute Coffee Sacks Made in New Zealand Assorted Prints Hills Hats Side Pin Cotton Sweatband Cotton Lining Sizes: S/M and L/XL; fits true to size. |
Close
|
Heritage Collection 1950s Roy |
---|
Made in the USA The King of the Cowboys, Roy Rogers, was a famous singer and cowboy actor during the days of television. He and his third wife Dale Evans (the Queen of the West), his golden palomino Trigger, and his German Shepard Bullet, were featured in over one hundred movies and The Roy Rogers Show which ran on radio for nine years before moving to television from 1951 through 1957. In post-war America, Roy was the embodiment of the western hero. For the Bollman Hat Company, he was a champion of headwear on both the big and small screen. Roy Rogers visited the Bollman factory in 1960 to express gratitude to Bollman Employees for providing him with his signature hat. It was quite a day in Adamstown as Rogers was a beloved figure. Upon addressing the employees, Roy toured the factory, signed autographs and posed with children from the community. Approx. 4 5/8" C-Crown (Teardrop) 4" Raw Edge Curled Brim Made of: 100% Wool Felt Printed Leather Sweatband Custom 140th Lining Hat Box and Certificate Included Sizes: S, M, L, and XL; fits true to size. |
Close
|
Havana Coffee Works Jute Baker Boy Hat |
---|
Please Note: Coffee sack color/prints are random and cannot be selected. Made in New Zealand Hills Hats and Havana Coffee Works have collaborated together by recycling jute coffee sacks from around the world into a unique range of handcrafted headwear for coffee and hat lovers! Every Havana Coffee Baker Boy Cap is made from a random assortment of coffee sacks ensuring a variety of colors and prints, making this a fun and stylish cap. Approx. 10" Diameter 2 1/4" Bill Made of: 100% Jute Coffee Sacks Made in New Zealand Assorted Prints Hills Hat Side Pin Cotton Sweatband Cotton Lining Sizes: S, M, L, XL and XXL; fits true to size. |
Close
|
Classic Assorted Side Feather 6-Pack |
---|
Please Note: Feathers and colors are ASSORTED and will vary. Packs CANNOT be customized and are sold as is. Improve the quality of look in your favorite hat with our handsome assortment of side feathers. Pick a feather to match your outfit of the day or add one for a pop of color. The pack comes with an assortment of 6 classic side feathers in a variety of shapes and color combinations. Just slide the feather behind your hat band and hit the town! Also available in additional assortments Fashion and Dapper. Approx. 3" - 3 1/2" Tall Size: One 6-pack of assorted side feathers per order. |
Close
|
Heritage Collection 1920s Fedora Hat |
---|
Made in the USA The "Roaring Twenties", as the decade is affectionately dubbed, saw an explosion of rich cultural activity, brought on by unprecedented economic prosperity. Gangsters, flappers, speakeasies, jazz and the Charleston were sweeping the nation. Fashion likewise grew by leaps and bounds during this time, as the public became less and less inhibited by prior social standards. People were finally "letting loose" by donning such aesthetically-audacious ensembles. The term Fedora was in use as early as 1891 but the style really took off in the Twenties, topping off men's fashion during a golden age. The Fedora featured a pinched crown with the brim turned down in the front and up in the back. This complimented the women's Cloche style. Indeed, blithe indulgence marked this decade. And once again, Bollman was there indulging hat lovers with headwear that made a personal fashion statement and truly captured the exuberance of America at the time. The Fedora has evolved and endured and Bollman has produced more varieties of the Fedora than any other style in it's history. Approx. 4" Center Pinch Crown 2 1/2" Underwelt Brim Made of: 100% Wool Felt Printed Leather Sweatband Custom 140th Lining Sizes: S, M, L, and XL; fits true to size. |
Close
|
Route 66 Raffia Straw Cowboy Hat |
---|
Conner's Route 66 Raffia Straw Cowboy Hat is a great hat to wear while traveling on the road. The different tones in the straw makes this piece pop out from the rest. Approx. 4" Teardrop Crown 3 1/2" Wired Shapeable Brim Made of: 100% Organic Raffia Straw Vented Crown Elasticized Cotton Terry Sweatband Lightweight Leather Hat Band with Rt 66 Logo Organic Cotton Inner Pouch with Care Instructions Unlined Sizes: S/M and L/XL; fits true to size. |
Close
|
Weathered Cotton Booney Hat |
---|
Conner's Weathered Cotton Booney Hat has a secret pocket on the inside of the crown where you can store your ID or cash while you are out and about. It is crushable and packable, so you don't have to worry about how you are going to get it to fit in your bag and not get damaged. Approx. 2 3/4" Square Crown 2 1/2" Floppy Brim Made of: 52% Cotton 48% Polyester Cotton Sweatband Conner Side Patch Ventilation Eyelets Crushable/Packable Self-Fabric Chin Strap Pocket inside crown Unlined Sizes: S, M, L, and XL; fits true to size. |
USA: 1-888-VHS-HATS (1-888-847-4287)
INT'L: +1 619-906-4440 Se habla español
Shop for Hats at VillageHatShop.com | Privacy Policy | Website Accessibility | Site Map
Copyright © 1999-2020 Village Hat Shop: The #1 Source for Hats Online
*ALL SPECIAL OFFERS AND DISCOUNTS
Excludes wholesale/B2B, Certain Brand Restrictions, Special Orders or Where Otherwise Noted.
CONTACT USWe are happy to help! |
1 (888) 847-4287Mon-Sun 8am-4:00pm |