Close
|
Italian Straw Skimmer Hat |
---|
Made in Italy Although superseded by the Panama hat in this century, the Skimmer was for many decades the man's straw hat of choice. The Italian Skimmer by Capas is Made in Italy from 4-ply Koberg straw. This is an authentic, high quality Skimmer hat often assiciated with barber shop quartets, jazz bands, and the like. (Also known as a Boater or Sailor). Approx. 3 1/2" Flat Top Crown 2 1/4" Flat Brim Made of: 100% 4-Ply Koberg Straw Striped Hat Band with Side Bow Firm/Stiff Body Leather Sweatband Lined Sizes: Fitted - Sizes 6 7/8 (S) to 7 3/4 (XXL); fits true to size. |
Close
|
3-Pleat Cotton Puggaree Hat Band |
---|
A new hat band can do wonders to freshen up any old hat, may we suggest the 3-Pleat Cotton Puggaree Hat Band by Capas Headwear. Featuring a multitude of great colors, this pug hat band is made of 100% cotton. Need to dress your hat up in something new? Look no further than the 3-Pleat Cotton Puggaree Hat Band - a fresh new look to your favorite hat! For best results, please follow all instructions for use (below). *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. Approx. 28" Total Length, End to End 1 7/8" Width Made of: 100% Cotton 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! |
Close
|
T3 Cotton Duck Booney Hat - Khaki |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection The T3 is the most sought after Tilley Hat - made of classic cotton duck canvas in the traditional "Aussie" style with a versatile snap-up brim. The original design has 40 years of history, make sure to pay homage with your very own T3. Approx. 4" Crown 2 3/4" Front/Back Brim 2 3/8" Side Brim Made of: 100% Cotton Duck Features: * Guaranteed for life. * Certified sun protection - delivers an UPf of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Keep it on in windy conditions through the wind cord & size cinch system. * Secure your Hat during a steep incline with rear brim loop for clip - loop also holds wind cords when not in use. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Buoyancy - stays afloat in water. * Weighs 5.4 oz/153 grams. * DWR (Durable Water Repellent) Finish. * British brass grommets. * OEKO-TEX® Certification. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Sizes: 6 7/8 (S) - 7 7/8 (XXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
Cotton Hat Sizer |
---|
Please Note: This item sells as a SINGLE sizing strip in either Black or White. Made in the USA Find yourself in-between hat sizes? Need a better fit? Prefer the added comfort of a cotton sweatband? All this can be achieved with the Cap-Ban-Nu Cotton Hat Sizer ideal for sizing your hat down by half a size! For best results, please follow all instructions for use (below). Instructions: * Remove tape backing from product. * Stick to the front section of the hat's sweatband or whatever area the hat has a loose fit (front, back or sides). You can also place the sizer behind the sweatband, directly onto the hat, or onto the backside of the sweatband. * Discard the used strip when soiled and replace. Approx. 10 3/4" Length 1" Width 2.5 MM Thick Made of: 100% Cotton Jersey Size: One single sizer per pack. One Size Fits Most. |
Close
|
T3 Cotton Duck Booney Hat - Natural |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection The T3 is the most sought after Tilley Endurables hat, the originale with 40 years of history to back it up. Made of classic cotton duck canvas in the unique booney style with a versatile snap-up brim. Approx. 4" Flat Crown 2 3/4" Brim - Front & Back 2 3/8" Brim - Sides Made of: 100% Cotton Duck Features: * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Keep it on in windy conditions through the wind cord & size cinch system. * Secure your Hat during a steep incline with rear brim loop for clip - loop also holds wind cords when not in use. * Hydrofil® anti-sweat band to wick away moisture. * Weighs 5.4 oz/153 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) Finish. * Double Snap-Up Brim. * British Brass Grommets. * OEKO-TEX® certification. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Size(s): 6 7/8 (S) - 8+ (XXXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
3-Pleat Satin Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a multitude of great colors, the 3-Pleat Satin Puggaree Hat Band will give a fresh new look to your favorite hat. For best results, please follow all instructions for use (below). Approx. 28" Total Length, End to End 2" Width Made of: 100% Satin 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
The McKenzie Waxed Cotton Outback Hat |
---|
Please Note: Sizing for this style runs large. See below or call us at 1-888-847-4287 for help with sizing. S = 7 - 7 1/8 M = 7 1/4 L = 7 3/8 - 7 1/2 XL = 7 5/8 XXL = 7 3/4 Made in New Zealand The McKenzie Waxed Cotton Outback Hat is a staple amongst New Zealand styles - a waxed cotton hat that can survive any type of climate. The McKenzie is made for an arid climate but will also serve the wearer well in the rain. This hat comes with a chinstrap and two ventilated eyelets on each side of the crown. Approx. 4 3/8" Teardrop Crown 3 1/4" Curved Brim Made of: 100% Australian Oilskin (Waxed Cotton) Made in New Zealand Four Ventilation Eyelets Adjustable Wind Cord Cotton Sweatband Water Resistant Size(s): S, M, L, XL and XXL; runs large, please see size disclaimer at top. |
Close
|
The Milford Wax Cotton Fedora Hat |
---|
Please Note: Hills Hats of New Zealand no longer make the Milford with a side pin. To reflect this change, the side pin has been removed from the description below. Made in New Zealand The Milford Fedora Wax Cotton Fedora Hat is a structured water repellent hat made of British oilskin waxed cotton. Designed with a downward brim the Milford is detailed with 3 eyelets on each side for ventilation. Approx. 3 1/2" Center Pinch Crown 2 3/8" Floppy Brim Made of: 100% Australian Oilskin (Waxed Cotton) Water Resistant 3 Ventilation Eyelets on Each Side of Crown Cotton Sweatband Plaid Fabric Lining Size(s): S, M, L, XL, and XXL; fits true to size. |
Close
|
Paisley 3-Pleat Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a classic paisley print in varying colors, the Paisley 3-Pleat Puggaree Hat Band by Capas Headwear will give a colorful new twist to your favorite hat. For best results, please follow all instructions for use (below). Approx. 29" Total Length, End to End 1 7/8" Width Made of: 100% Polyester 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Havana Coffee Works Jute Pork Pie Hat |
---|
Please Note: Coffee sack color/prints are random and cannot be selected. Made in New Zealand Hills Hats and Havana Coffee Works have collaborated together by recycling jute coffee sacks from around the world into a unique range of handcrafted headwear for coffee and hat lovers! Every Havana Coffee Works Jute Pork Pie Hat is made from a random assortment of coffee sacks ensuring a variety of colors and prints. Approx. 3" Flat Top Crown 2" Snap Brim Made of: 100% Jute Coffee Sacks Made in New Zealand Hills Hats Side Pin Assorted Prints Cotton Sweatband Cotton Lining Sizes: S, M, L, XL and XXL; fits true to size. |
Close
|
LTM6 Airflo Hat - Khaki/Olive |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection The Tilley LTM6 AIRFLO® Hat is made from a lightweight 100% recycled nylon with a UPF50+ rating. The bluesign® approved fabric provides excellent UV protection while the mesh surrounding the top of the crown allows for incredible breathability. Approx. 4 3/8" Crown 3 1/4" Front/Back Brim 2 1/2" Side Brim Made of: Body - 100% Recycled Nylon Mesh - 100% Polyester Features: * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Underbrim reduces glare from most surfaces. * Keep it on in windy conditions through the wind cord & size cinch system. * Secure your Hat during a steep incline with rear brim loop for clip - loop also holds wind cords when not in use. * Ventilation through mesh insert around the top of the crown. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Lightweight, weighs 4 oz/113 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) Finish. * bluesign® Approved Fabric. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Sizes: 6 7/8 (S) - 8+ (XXXL);Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
LTM6 Airflo - Olive Green |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection The Tilley LTM6 AIRFLO® Hat is made from a lightweight 100% recycled nylon with a UPF50+ rating. The bluesign® approved fabric provides excellent UV protection while the mesh surrounding the top of the crown allows for incredible breathability. Approx. 4 3/8" Crown 3 1/4" Front/Back Brim 2 1/2" Side Brim Made of: Body - 100% Nylon Mesh - 100% Polyester Features: * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Underbrim reduces glare from most surfaces. * Keep it on in windy conditions through the wind cord & size cinch system. * Secure your Hat during a steep incline with rear brim loop for clip - loop also holds wind cords when not in use. * Ventilation through mesh insert around the top of the crown. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Lightweight, weighs 4 oz/113 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) finish. * bluesign® Approved. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Sizes: 6 7/8 (S) - 8+ (XXXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file an insurance claim, please click here to be directed to the Tilley returns and exchange page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
Havana Coffee Works Jute Duckbill Ivy Cap |
---|
Please Note: Coffee sack color/prints are random and cannot be selected. Made in New Zealand Hills Hats and Havana Coffee Works have collaborated together by recycling jute coffee sacks from around the world into a unique range of handcrafted headwear for coffee and hat lovers! Every Havana Coffee Works Jute Duckbill Ivy Cap is made from a random assortment of coffee sacks ensuring a variety of colors and prints. Approx. 2 3/4" Sewn Bill Made of: 100% Jute Coffee Sacks Made in New Zealand Hills Hats Side Pin Assorted Prints Cotton Sweatband Cotton Lining Sizes: S, M, L, XL and XXL; fits true to size. |
Close
|
Havana Coffee Works Jute Mod Trilby Fedora Hat |
---|
Please Note: Coffee sack color/prints are random and cannot be selected. Made in New Zealand Hills Hats and Havana Coffee Works have collaborated together by recycling hemp coffee sacks from around the world into a unique range of handcrafted headwear for coffee and hat lovers! Every Havana Coffee Works Jute Mod Trilby Fedora Hat is made from a random assortment of coffee sacks ensuring a variety of colors and prints, making this a fun and stylish fedora. Approx. 4" Center Pinch Crown 2" Pre-Snap Brim Made of: 100% Jute Coffee Sacks Made in New Zealand Hills Hat Side Pin Assorted Prints Cotton Sweatband Cotton Lining Sizes: S, M, L, XL and XXL; fits true to size. |
Close
|
Traveler Fur Felt Fedora Safari Hat |
---|
Made in Italy The Borsalino Traveler Fur Felt Fedora Safari Hat is both stylish and functional. Made of 100% brushed fur felt, this fedora is both water repellent and crushable. Easy to travel with, the Traveler Fur Felt Fedora Safari Hat can be packed into your suitcase and be ready to wear at your destination. Approx. 4 1/2" Center Pinch Crown 2 1/2" Downturned Brim Made of: 100% Fur Felt Water Repellent Crushable/Packable Underwelt Brim Leather Hat Band Borsalino Side Pin Polyester Sweatband Unlined Sizes: 55 cm (6 7/8, Small) through 63 cm (7 3/4, XX-Large), fits true to size. |
Close
|
Terry Cloth Hat Sizer |
---|
Please Note: This item sells as a SINGLE sizing strip in either Black or Tan. Made in the USA Find yourself in-between hat sizes? Need a better fit? Prefer the added comfort of a terry cloth sweatband? All this can be achieved with the Cap-Ban-Nu Terry Cloth Hat Sizer that can size your hat down half a size! For best results, please follow all instructions for use (below). Instructions: * Remove tape backing from product. * Stick to the front section of the hat's sweatband or whatever area the hat has a loose fit (front, back or sides). You can also place the sizer behind the sweatband, directly onto the hat, or onto the backside of the sweatband. * Discard the used strip when soiled and replace. Approx. 10 3/4" Length 1 1/8" Width 5 MM Thick Made of: 100% Cotton Terry Cloth Size: One single sizer per pack. One Size Fits Most. |
Close
|
TWS1 Paddler Hat - Stone |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection You're ready for any adventure with the TWS1 All Weather Hat from Tilley! This outdoor hat is perfect for any trek, in or out of water. The TWS1 All Weather Hat is ready keep you comfortable with the Schoeller 3x dry fabric C-Change membrane to control temperature when out in the sun, wind, and rain. The best part? It's also very comfortable! Approx. 3 1/4" Crown 2 3/4" Front/Back Brim 2 3/8" Side Brim Made of: 73% Polyester Schoeller® Technologies ecorepel® 27% Polyurethane Schoeller® Technologies ecorepel® Features: * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Underbrim reduces glare from most surfaces. * Wind stability through an extra stiff front brim & plastic wiring around the whole brim. * Keep it on in windy conditions through the wind cord & size cinch system. * Reflective yarns in the wind cords to increase visibility at dusk & dawn. * Secure your Hat while portaging with rear brim loop for clip - loop also holds wind cords when not in use. * Temperature is regulated with Schoeller® Fabric c_change® membrane. * Ventilation through a back vent & side grommets. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Lightweight, weighs 3.2 oz/91 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) finish. * Snap up sides for added wind stability & for added style. * Machine wash cool water, delicate cycle or hand wash; Reshape & air-dry. Size(s): 7 (M) - 7 7/8 (XXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
LTM8 Airflo Mesh Crown Hat |
---|
UPF 50+ Sun Protection The Tilley LTM8 Airflo Mesh Crown Hat is from a lightweight material with a UPF 50+ rating. The bluesign® approved fabric provides excellent UV protection while the mesh surrounding the top of the crown allows for incredible breathability. Approx. 3 3/4" Flat Teardrop Crown 3 1/8" Stitched Flat Brim Made of: Body - 100% Nylon Mesh - 100% Polyester Features: * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Keep it on in windy conditions through the wind cord & size cinch system. * Ventilation through mesh insert around the top of the crown. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Lightweight, weighs 4 oz/113 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) finish. * bluesign® Approved. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Sizes: 6 7/8 (S) - 8+ (XXXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file an insurance claim, please click here to be directed to the Tilley returns and exchange page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
The Squatter Waxed Cotton Booney Hat |
---|
Made in New Zealand The Squatter Waxed Cotton Booney Hat features genuine Australian oilskin (waxed cotton) in a classic booney design with a crushable crown. Water repellent, the wide brim will keep you protected and the chin cord with toggle will ensure a secure fit. Vertical side ventilation grommets will help keep your head cool. Approx. 3 1/2" Square Crown 3" Floppy Brim Made of: 100% Australian Oilskin (Waxed Cotton) Made in New Zealand Crushable Crown Two Ventilation Grommets per Side Adjustable Toggle Chincord Cotton Sweatband Brushed Cotton Lining Water Resistant Sizes: S, M, L, XL and XXL; fits true to size. |
Close
|
LTM5 Airflo Hat - Stone |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection The Tilley LTM5 AIRFLO® Hat is designed with a medium brim and polyester mesh in the crown for coolness and comfort during hot days and strenuous activities. The LTM5 AIRFLO® is similar to the LTM6 but has a slimmer profile but the same water repellent finish. Approx. 3 3/4" Crown 2 5/8" Front Brim 2 3/4" Back Brim 2 1/8" Side Brims Made of: Body - 100% Nylon Mesh - 100% Polyester Features: * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks. 98% of harmful UVA/UVB radiation. * Keep it on in windy conditions through the wind cord & size cinch system. * Secure your Hat during a steep incline with rear brim loop for clip - loop also holds wind cords when not in use. * Ventilation through mesh insert around the top of the crown. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Weighs 3 oz/85 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) Finish. * bluesign® Approved. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Sizes: 6 7/8 (S) - 8+ (XXXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
Ultralight DWR Sunshield Neck Flap Baseball Cap |
---|
UPF 50+ Sun Protection The Ultralight DWR Sunshield Neck Flap Baseball Cap is a modern 5-panel design by Tilley Endurables. Has UPF 50+ sun protection, is water repellent, and if that wasn't enough, it also features a removable sun shield cape. Designed for function, this cap also has ventilation eyelets, a DWR finish and an adjustable strap at the back so you can find your best fit. Approx. 2 1/2" 5 Panel Crown 2 3/4" Curved Bill Made of: 94% Recycled Nylon 6% Elastane UPF 50+ Sun Protection Designed in Canada DWR Finish - Durable Water Repellent Quick Drying Eyelets for Ventilation Removable Sun Shield Cape Adjustable Strap - Back Anti-Sweat Sweatband Inseam Taping Mesh Lining Size(s): S/M and L/XL; fits true to size. |
Close
|
Waterproof Rain Hat |
---|
Please Note: Sizes run small. See below or call us at 1-888-847-4287 for help with sizing. S = 6 3/4 M = 7 L = 7 1/4 XL = 7 1/2 UPF 50+ Sun Protection Tilley Endurables has taken the basic boonie to the next level with the Waterproof Rain Hat. The seam sealed construction makes this hat rain proof and wind proof, a double whammy when it comes to inclement weather. The snap-up sides help for a more streamlined silhouette and the adjustable reflective wind cord allows for a custom fit. Approx. 3 1/2" Crown 2 1/2" Front/Back Brim 2 1/4" Side Brim Made of: 73% Polyester 27% Polyurethane Features: * Designed in Canada. * UPF 50+ Sun Protection - Tested and Certified. * Rain and Wind Proof - Moisture Wicking and Durable Water Repellency. * DWR (Durable Water Repellent) finish. * Seam Sealed. * Keep it on in windy conditions through the wind cord & size cinch system. * Reflective yarns in the elasticized wind cords to increase visibility at dusk & dawn. * Adjustable Wind Cord with Metal Toggle - For Windy Conditions * Secure your Hat while portaging with rear brim loop for clip - loop also holds wind cords when not in use. * Temperature is regulated with Schoeller® Fabric c_change® membrane. * Hydrofil® anti-sweat band to wick away moisture. * Quick Drying. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Buoyancy - stays afloat in water. * Snap up sides for added wind stability & for added style. * Mesh Lining. * Machine wash cool water, delicate cycle or hand wash; Reshape & air-dry. * Tilley Side Tag. Size(s): S, M, L, and XL; ; runs small, please see disclaimer at the top of the product description. |
Close
|
Seagrass Straw Ascot Cap |
---|
Please Note: This style runs large, see sizing details below or call us at 1-888-847-4287 for help with sizing. S = 7 M = 7 1/4 L = 7 1/2 XL = 7 3/4 Incredibly breathable and lightweight, the Seagrass Straw Ascot Cap by Capas Headwear is unique among straw caps. Featuring an open weave twisted seagrass straw body, this ascot provides shading from the sun while maximizing ventilation. Natural seagrass possesses wonderful color variation that gives the cap a uniquely organic and relaxed look. Approx. 10" Length 8" Width 2" Brim/Bill (Measured from size M) Made of: 100% Seagrass Straw Open Weave Twisted Seagrass Straw Body Cotton Sweatband Unlined Sizes: S, M, L and XL. Sizing runs large, see sizing disclaimer at top of description. |
Close
|
TH5 Hemp Hat |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection Made in Canada The TH5 Hemp Hat from TIlley Endurables is natural and tough, built for endurance and longevity. Hemp fabric is very much like cotton, so it breathes extremely well. The nature of this fabric is that it does fade with continuous sun exposure, creating a more unique hat as time goes by. Approx. 3 3/4" Crown 2 5/8" Front Brim 2 3/4" Back Brim 2 1/8" Side Brims Made of: 100% Hemp Fabric Features: * Made in Canada. * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks. 98% of harmful UVA/UVB radiation. * Keep it on in windy conditions through the wind cord & size cinch system. * Secure your Hat during a steep incline with rear brim loop for clip - loop also holds wind cords when not in use. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Weighs 5 oz/150 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) Finish. * OEKO-TEX® certification. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Sizes: 7 (M) - 7 7/8 (XXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
The Sou'wester Waxed Cotton Bucket Hat |
---|
Made in New Zealand Get the right amount of coverage with Hill Hats of New Zealand's Sou'wester Waxed Cotton Bucket Hat. Not only will you receive the durability and waterproofing properties that Hills Hats of New Zealand offers, the Sou'wester comes complete with an internal oilskin neck and ear flap protection that is lined in comfortable brushed cotton flannel to keep you warm from the elements. Approx. 4 1/4" Round Crown 2 7/8" Downturned Brim - Front 4 1/4" Downturned Brim - Back 3 1/2" Downturned Brim - Sides Made of: 100% Australian Oilskin (Waxed Cotton) Made in New Zealand 100% Australian Oilskin Brushed Cotton Flannel Lining Chin Cord Toggle and Keeper Internal Oilskin Neck and Ear Protection Flap Water Resistant Sizes: S, M, L, XL and XXL; fits true to size. |
Close
|
Havana Coffee Works Jute Gulf Cadet Cap |
---|
Please Note: Coffee sack color/prints are random and cannot be selected. Made in New Zealand Hills Hats and Havana Coffee Works have collaborated together by recycling jute coffee sacks from around the world into a unique range of handcrafted headwear for coffee and hat lovers! Every Havana Coffee Works Gulf Cadet Cap is made from a random assortment of coffee sacks ensuring a variety of colors and prints, making this a fun and stylish cadet cap. Approx. 3" Crown 2 1/2" Bill Made of: 100% Jute Coffee Sacks Made in New Zealand Assorted Prints Hills Hats Side Pin Cotton Sweatband Cotton Lining Sizes: S/M and L/XL; fits true to size. |
Close
|
Havana Coffee Works Jute Baker Boy Hat |
---|
Please Note: Coffee sack color/prints are random and cannot be selected. Made in New Zealand Hills Hats and Havana Coffee Works have collaborated together by recycling jute coffee sacks from around the world into a unique range of handcrafted headwear for coffee and hat lovers! Every Havana Coffee Baker Boy Cap is made from a random assortment of coffee sacks ensuring a variety of colors and prints, making this a fun and stylish cap. Approx. 10" Diameter 2 1/4" Bill Made of: 100% Jute Coffee Sacks Made in New Zealand Assorted Prints Hills Hat Side Pin Cotton Sweatband Cotton Lining Sizes: S, M, L, XL and XXL; fits true to size. |
Close
|
The Storm Waxed Cotton Bucket Hat |
---|
Made in New Zealand The Storm is a soft crushable crown bucket hat made of Australian oilskin waxed cotton. Water repellent, the hat is designed with self taped external seams and extra soft polar fleece lining for extra warmth. Approx. 3 1/2" Square Crown 2 1/4" Floppy Brim Made of: 100% Australian Oilskin (Waxed Cotton) Made in New Zealand Hills Hats Logo Patch Polar Fleece Lining Crushable Water Resistant Sizes: S, M, L, XL and XXL; fits true to size. |
USA: 1-888-VHS-HATS (1-888-847-4287)
INT'L: +1 619-906-4440 Se habla español
Shop for Hats at VillageHatShop.com | Privacy Policy | Website Accessibility | Site Map
Copyright © 1999-2020 Village Hat Shop: The #1 Source for Hats Online
*ALL SPECIAL OFFERS AND DISCOUNTS
Excludes wholesale/B2B, Certain Brand Restrictions, Special Orders or Where Otherwise Noted.
CONTACT USWe are happy to help! |
1 (888) 847-4287Mon-Sun 8am-4:00pm |