Close
|
3-Pleat Cotton Puggaree Hat Band |
---|
A new hat band can do wonders to freshen up any old hat, may we suggest the 3-Pleat Cotton Puggaree Hat Band by Capas Headwear. Featuring a multitude of great colors, this pug hat band is made of 100% cotton. Need to dress your hat up in something new? Look no further than the 3-Pleat Cotton Puggaree Hat Band - a fresh new look to your favorite hat! For best results, please follow all instructions for use (below). *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. Approx. 28" Total Length, End to End 1 7/8" Width Made of: 100% Cotton 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! |
Close
|
Italian Straw Skimmer Hat |
---|
Made in Italy Although superseded by the Panama hat in this century, the Skimmer was for many decades the man's straw hat of choice. The Italian Skimmer by Capas is Made in Italy from 4-ply Koberg straw. This is an authentic, high quality Skimmer hat often assiciated with barber shop quartets, jazz bands, and the like. (Also known as a Boater or Sailor). Approx. 3 1/2" Flat Top Crown 2 1/4" Flat Brim Made of: 100% 4-Ply Koberg Straw Striped Hat Band with Side Bow Firm/Stiff Body Leather Sweatband Lined Sizes: Fitted - Sizes 6 7/8 (S) to 7 3/4 (XXL); fits true to size. |
Close
|
Hoquy Wool Basque Beret |
---|
Made in France - Exclusive to the US Please Note: The Navy Blue color is deep and dark in tone. The iconic Hoquy Beret is known all over the world, made by Héritage par Laulhère, a company that has been in existence since 1840. The design studio and workshops are all located within the foothills of the French Pyrenees, the very last of the producers of the beret in Oloron-Ste-Marie. The origin of the "Basque" beret is actually from the Bearn Shepherds of the same name, Bearn. They first hand knit the beret and then felted the wool in mountain waters to create a hat that protects against the sun and harsh winters. Basque became the more popular term when Napoleon III, noticed it upon the laborers working on his Palais de Biarritz. The quality of the workmanship is evident in this simple but elegant beret. The merino wool is soft but durable and water resistant. The luxe foulard finish to the wool is a characteristic unique only to Héritage par Laulhère's luxe line of Basque berets, including the Hoquy. Approx. 10 1/2" Diameter Measured from size 56cm - diameters are proportional to beret size. Made of: 100% Pure Merino Wool Made in France - Exclusive to the US Impermeable - Water Resistant Cabillou - Center Top Tassel Héritage par Laulhère Side Pin Goat Leather Sweatband with Contrast Leather Piping Satin Lining Custom Hoquy Sewn Inner Label Luxury Box Sizes: 55cm - 64cm; general hat sizes 6 7/8 (S) - 8 (XXXL); fits true to size. |
Close
|
Paisley 3-Pleat Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a classic paisley print in varying colors, the Paisley 3-Pleat Puggaree Hat Band by Capas Headwear will give a colorful new twist to your favorite hat. For best results, please follow all instructions for use (below). Approx. 29" Total Length, End to End 1 7/8" Width Made of: 100% Polyester 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Mariner Rush Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. UPF 50+ Sun Protection Locally based out of San Diego, CA, Hemlock Hat Co brings you their specialty line of functional, outdoor hats that celebrate self-expression. Trimmed and lined with a wide array of fun, original prints, their lifeguard styles allow you to express your personal style while enjoying everything the outdoors has to offer. The new Mariner Rush Straw Lifeguard Hat features their classic straw lifeguard hat body with underwater-themed binding on brim, underbrim and Hemlock sewn patch. An adjustable chin cord adds protection during windy conditions; a stretchy and absorbent sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 3/4" Cattleman Crown 4 1/2" Downturned Brim Made of: Body - 100% Handwoven Rush Straw Lining - 100% Polyester UPF 50+ Sun Protection - Underwater Print Fabric Underbrim Designed in California, USA Sewn Hemlock Patch - Front Underwater Print Fabric Binding On Brim Braided Rope Chin Cord with Wooden Adjustor Elastic Sweatband - Stretches to Fit Unlined Crown Size(s): One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 1/4 (L) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
Close
|
3-Pleat Satin Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a multitude of great colors, the 3-Pleat Satin Puggaree Hat Band will give a fresh new look to your favorite hat. For best results, please follow all instructions for use (below). Approx. 28" Total Length, End to End 2" Width Made of: 100% Satin 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Leather Greek Fisherman's Cap |
---|
Made in Greece Capas Headwear is giving the fisherman's cap some street credit with a leather body in their latest fall headpiece, the Leather Greek Fisherman's Cap. Made of genuine leather, details include a double-layered cord hat band, decorative bill accent, leather sweatband and satin lining. A practical design this cap is dressed up for a night on the town. Approx. 1 7/8" Soft Crown 3/4" Structured Band 2 1/8" Bill/Visor Made of: 100% Leather Double-Layered Cord Hat Band Leather Side Buttons Decorative Bill Accent Leather Sweatband Satin Lining Sizes: S, M, L and XL; fits true to size. |
Close
|
Jewel Adjustable Baseball Cap |
---|
The Jewel Adjustable Baseball Cap from Something Special is a nice basic cap with a little bit o' bling. Featuring a classic 6-panel crown and pre-curved bill//visor, this adjustable hook and loop strap cap is studded with fun sequins throughout. With so many colors to choose from, the Jewel Baseball Cap by Something Special is sure to have one (or two) that compliments your taste. Approx. 2 3/4" Bill/Visor Made of: 100% Polyester Decorative Sequins Throughout Adjustable Hook and Loop Strap Cotton Poplin Sweatband Lightweight Size: Adjustable - Fits up to size 7 3/8 (L) comfortably. |
Close
|
Liberty Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. UPF 50+ Sun Protection Locally based out of San Diego, CA, Hemlock Hat Co brings you their specialty line of functional, outdoor hats that celebrate self-expression. Trimmed and lined with a wide array of fun, original prints, their lifeguard styles allow you to express your personal style while enjoying everything the outdoors has to offer. The new Liberty Straw Lifeguard Hat features their classic straw lifeguard hat body with a American flag-themed binding on brim, lining and Hemlock sewn patch. An adjustable chin cord adds protection during windy conditions; a stretchy and absorbent sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 3/4" Cattleman Crown 4 1/4" Downturned Brim Made of: Body - 100% Handwoven Straw Lining - 100% Polyester UPF 50+ Sun Protection - American Flag Print Fabric Underbrim Designed in California, USA Sewn Hemlock Patch - Front American Flag Print Fabric Binding On Brim Braided Rope Chin Cord with Wooden Adjustor Elastic Sweatband - Stretches to Fit Unlined Crown Size(s): One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 1/4 (L) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
Close
|
Jewel Fabric Bucket Hat |
---|
The Jewel Fabric Bucket Hat from Something Special is a nice basic bucket with a little bit o' bling. Featuring a classic square crown and downturned brim, this bucket is studded with fun sequins. With so many colors to choose from, the Jewel Bucket Hat by Something Special is sure to bring light and sparkle to your day. Approx. 3 1/2" Square Crown 2 3/8" Downturned Brim Made of: 100% Polyester Flexible Body Lightweight Decorative Sequins Cotton Poplin Sweatband Stiff Mesh Lining Size(s): Adjustable - Fits up to size 7 1/8 (M) comfortably. |
Close
|
Seagrass Straw Ascot Cap |
---|
Please Note: This style runs large, see sizing details below or call us at 1-888-847-4287 for help with sizing. S = 7 M = 7 1/4 L = 7 1/2 XL = 7 3/4 Incredibly breathable and lightweight, the Seagrass Straw Ascot Cap by Capas Headwear is unique among straw caps. Featuring an open weave twisted seagrass straw body, this ascot provides shading from the sun while maximizing ventilation. Natural seagrass possesses wonderful color variation that gives the cap a uniquely organic and relaxed look. Approx. 10" Length 8" Width 2" Brim/Bill (Measured from size M) Made of: 100% Seagrass Straw Open Weave Twisted Seagrass Straw Body Cotton Sweatband Unlined Sizes: S, M, L and XL. Sizing runs large, see sizing disclaimer at top of description. |
Close
|
Blackout Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. Locally based out of San Diego, CA, Hemlock Hat Co brings you their specialty line of functional, outdoor hats that celebrate self-expression. Trimmed and lined with a wide array of fun, original prints, their lifeguard styles allow you to express your personal style while enjoying everything the outdoors has to offer. The new Blackout Straw Lifeguard Hat features their classic straw lifeguard hat body with a black-colored trim, lining and Hemlock sewn patch. An adjustable chincord adds protection during windy conditions; a stretchy and absorbent sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 3/4" Cattleman Crown 4 5/8" Downturned Brim Made of: Body - 100% Handwoven Seagrass and Rush Straw Lining - 100% Polyester Designed in California, USA Sewn Hemlock Patch - Front Blackout Print Fabric Trimmed Brim UPF 50+ Blackout Print Fabric Underbrim Braided Rope Chin Cord with Wooden Adjustor Elastic Sweatband - Stretches to Fit Unlined Crown Size(s): One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 1/4 (L) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
Close
|
Kids' Wool Felt C-Crown Trilby Fedora Hat |
---|
Whether you need it for a Halloween costume or a school play, or maybe your little one wants to start a trend. The wool felt C-Crown Stingy Brim Fedora is a scaled down version of a classic shape. Approx. 3 1/2" C-Crown (Teardrop) 1 1/4" Overwelt Stingy Brim Made of: 100% Wool Felt 1" Wide Grosgrain Ribbon Hat Band Vinyl sweatband Unlined Sizes: Child's S, M, L, and XL. Suggested for: Kids 2-10 Years Old (see chart below): Age Inches CMS Hat Size Size 1 - 2 years 18 7/8 48 6 Small 2 - 4 years 19 5/8 50 6 1/4 Medium 5 - 7 years 20 3/8 52 6 1/2 Large 8 - 10 years 21 1/8 54 6 3/4 X-Large |
Close
|
Authentique Classic Wool Beret |
---|
Please Note: Laulhere have recently rebranded their items, some pieces will have a satin lining while others will have a cotton lining, linings cannot be selected. Made in France Based in Oloron-Sainte-Marie at the foothills of the Pyrenees, Héritage par Laulhère has withstood the test of time and remains the very last producer of the beret in the region. Since 1840, Héritage par Laulhère's design studio and workshops have remained in their original locations and continue to uphold tradition, quality, culture and heritage above all else. To Héritage par Laulhère, the words "Made in France" remain a proud statement and a promise of the highest quality. The Authentique Classic Wool Beret by Héritage par Laulhère is our newest addition to their line of classic, authentic and traditionally-crafted berets. A simple design; the Authentique is crafted of water-resistant merino wool and features a classic top tassel, sewn inner label, and Héritage par Laulhère side pin. Ideal for men or women, the Authentique is available in a medley of colors for a stylish finish to all your looks! Approx. 11" Diameter Made of: 100% Merino Wool Made in France Merino Wool Water Resistant Héritage par Laulhère Side Pin Cabillou - Center Top Tassel Héritage par Laulhère Label Lined Packable & Crushable Size: One Size Fits Most - Fits sizes 6 3/4 (XS) - 7 1/4 (L) comfortably. |
Close
|
Midsize Visor - Solid |
---|
Made in the USA Get the sun out of your eyes in style with the Solid Midsize Visor by No Headache. Featuring their patented No Headache design, the Solid Midsize Visor fits most women and is designed to avoid the headaches usually associated with visors. Approx. 4" Visor/Bill Made of: Plastic Frame Visor & Underside Fabric - 100% Polyester Spandex Microsuede Arm Fabric - 100% Neoprene UPF 50+ Sun Protection No Headache Patented Design Sustainable Recycled Plastic Inner Frame Quick Drying High-Tech Poly/Spandex Microsuede Fabric Black Underside - Reduces Glare Lightweight Size: One Size Fits Most - Fits up to size 7 1/4 (L) comfortably. |
Close
|
Classic Assorted Side Feather 6-Pack |
---|
Please Note: Feathers and colors are ASSORTED and will vary. Packs CANNOT be customized and are sold as is. Improve the quality of look in your favorite hat with our handsome assortment of side feathers. Pick a feather to match your outfit of the day or add one for a pop of color. The pack comes with an assortment of 6 classic side feathers in a variety of shapes and color combinations. Just slide the feather behind your hat band and hit the town! Also available in additional assortments Fashion and Dapper. Approx. 3" - 3 1/2" Tall Size: One 6-pack of assorted side feathers per order. |
Close
|
Campan Wool Basque Beret - Black |
---|
Made in France Based in Oloron-Sainte-Marie at the foothills of the Pyrenees, Héritage par Laulhère has withstood the test of time and remains the very last producer of the beret in the region. Since 1840, Héritage par Laulhère's design studio and workshops have remained in their original locations and continue to uphold tradition, quality, culture and heritage above all else. To Héritage par Laulhère, the words "Made in France" remain a proud statement and a promise of the highest quality. Made of the finest pure Merino wool, the Campan Wool Basque Beret by venerable Héritage par Laulhère is their highest quality luxe Basque beret - higher even than their world-famous Hoquy Basque Beret (sold exclusively in the USA). Weighing in at about 20 grams more than the Hoquy, the Campan undergoes two additional manufacturing processes and their famous luxe foulard finish. The resulting wool is not only luxuriously soft but also handily water resistant. Trimmed with a supple goat leather sweatband, yellow lace and bow, satin lining and custom Campan label, the Campan Wool Basque Beret is the pinnacle of luxury, quality, and tradition in Basque berets. Approx. 7/8" Sweatband 10 1/2" Diameter Measured from size 58cm - diameters are proportional to beret size. Made of: 100% Pure Merino Wool Made in France Impermeable - Water Resistant Cabillou - Top Center Tassel Héritage par Laulhère Side Pin Goat Leather Sweatband Yellow Lace and Bow Satin Lining Custom Campan Label Luxury Box Size(s): 55cm (S) through 62cm (XXL); fits true to size. |
Close
|
Fashion Side Feather 6-Pack |
---|
Please Note: Feathers and colors are ASSORTED and will vary. Packs CANNOT be customized and are sold as is. Improve the quality of look in your favorite hat with our fashion assortment of side feathers. Pick a feather to match your outfit of the day or add one for a pop of color. The pack comes with an assortment of 6 side feathers in a variety of shapes and fashion color combinations. Just slide the feather behind your hat band and hit the town! Also available in additional assortments Assorted and Dapper. Approx. 3" - 3 1/2" Tall Size: One 6-pack of assorted side feathers per order. |
Close
|
Golf Ball Hat-Tac |
---|
FINAL SALE Made in the USA Never again worry about your hats becoming misshapen, sagging, or losing their curve, thanks to the Golf Ball Hat-Tac. This revolutionary invention sticks to any surface thanks to the 3M foam adhesive backing, and the fixed curve platform allows hats to comfortably rest in an upright position. With this patented and trademarked design, your ball cap, fedora, or any other piece of headwear will never lose its curve. This is the perfect place to hang your hat! Approx. 45.5 mm High 97 mm Wide 50 mm Deep Made in the USA 3M Foam Adhesive Backing Fixed Curve Platform Golf Ball and Putting Green Print Sturdy and Reliable Works for Hats of All Sizes Manufacturer Instructions for How to Apply: * Prep surface: Take a soft wash cloth with Isopropyl or similar alcohol cleaner to create a nice clean surface for the HAT-TAC™ to stick onto. Our recommendation is to find a smooth clean surface with little texture. * After prepping the surface: Grab the tab sticking out and peel away the red backing with ease. HAT-TAC™ attaches to the wall using a foam medium hold double sided adhesive. * Position: Align your HAT-TAC™ a few centimeters off the wall, making sure to the top so is perfectly level. * Last step: Push softly, just enough to hold the HAT-TAC™ in place on the surface. Take a few steps back to make sure it is exactly where you want it positioned. If the positioning is perfect, push and hold the back side of the HAT-TAC™ to the wall firmly for 30 seconds then wait 30 minutes before hanging a hat. Manufacturer Instructions for How to Remove: * Step One: Firmly grab each side of the HAT-TAC™ with both hands. * Step Two: Slowly wiggle the HAT-TAC™ up and down to separate the adhesive back from the wall. Be careful during this step as removing too fast or incorrectly could peel paint. FINAL SALE |
Close
|
Wyatt Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. UPF 50+ Sun Protection Locally based out of San Diego, CA, Hemlock Hat Co brings you their specialty line of functional, outdoor hats that celebrate self-expression. Trimmed and lined with a wide array of fun, original prints, their lifeguard styles allow you to express your personal style while enjoying everything the outdoors has to offer. The new Wyatt Straw Lifeguard Hat features their classic straw lifeguard hat body with an bandana patchwork-themed binding on brim, lining and Hemlock sewn patch. An adjustable chin cord adds protection during windy conditions; a stretchy and absorbent sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 7/8" Cattleman Crown 4 1/2" Downturned Brim Made of: Body - 100% Handwoven Straw Lining - 100% Polyester UPF 50+ Sun Protection - Bandana Patchwork Print Fabric Underbrim Designed in California, USA Sewn Hemlock Patch - Front Bandana Patchwork Print Fabric Binding On Brim Braided Rope Chin Cord with Wooden Adjustor Elastic Sweatband - Stretches to Fit Unlined Crown Size(s): One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 1/4 (L) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
Close
|
Kids' Wool Felt Derby Hat |
---|
The Kids' Wool Felt Derby Hat is made of 100% wool felt and available in children's sizes. Ideal for formal events, dress up or play time - the Kids' Derby (aka Bowler) Hat can do it all! Featuring the classic trimmings including grosgrain ribbon hat band with side bow and side feather, there is nothing "novelty-ish" about this perfect little gentleman's hat! Approx. 4" Round Crown 2" Curled Brim Made of: 100% Wool Felt - Stiff Finish Grosgrain Ribbon Hat Band (1" Wide) Faux Leather Sweatband Capas Logo Crown Tip Unlined Sizes: Child's S, M, L, and XL. Suggested for: Kids 2-12 Years Old (see chart below): Age Inches CMS Hat Size Size 1 - 2 years 18 7/8 48 6 Small 2 - 4 years 19 5/8 50 6 1/4 Medium 5 - 7 years 20 3/8 52 6 1/2 Large 8 - 12 years 21 7/8 56 7 X-Large |
Close
|
Campan Wool Basque Beret - Navy Blue |
---|
Please Note: The Navy Blue color is deep and dark in tone. Made in France Based in Oloron-Sainte-Marie at the foothills of the Pyrenees, Héritage par Laulhère has withstood the test of time and remains the very last producer of the beret in the region. Since 1840, Héritage par Laulhère's design studio and workshops have remained in their original locations and continue to uphold tradition, quality, culture and heritage above all else. To Héritage par Laulhère, the words "Made in France" remain a proud statement and a promise of the highest quality. Made of the finest pure Merino wool, the Campan Wool Basque Beret by venerable Héritage par Laulhère is their highest quality luxe Basque beret - higher even than their world-famous Hoquy Basque Beret (sold exclusively in the USA). Weighing in at about 20 grams more than the Hoquy, the Campan undergoes two additional manufacturing processes and their famous luxe foulard finish. The resulting wool is not only luxuriously soft but also handily water resistant. Trimmed with a supple goat leather sweatband, yellow lace and bow, satin lining and custom Campan label, the Campan Wool Basque Beret is the pinnacle of luxury, quality, and tradition in Basque berets. Approx. 11" Diameter Made of: 100% Merino Wool Made in France Impermeable - Water Resistant Authenticated by Maison Laulhère Rivet Cabillou - Top Tassel Héritage par Laulhère Side Pin Goat Leather Sweatband - Yellow Border and Bouffette Custom Sewn Inner Label Satin Lining Size(s): 55cm (S) through 62cm (XXL); fits true to size. |
Close
|
Dapper Side Feather 6-Pack |
---|
Please Note: Feathers and colors are ASSORTED and will vary. Packs CANNOT be customized and are sold as is. The Dapper Side Feather 6-Pack is perfect if you are looking to give your tired and true a little something extra. With our fashion assortment of side feathers, you can pick a feather to match your outfit or use it to give a neutral look a pop of color. The pack comes with an assortment of 6 side feathers in a variety of shapes and color combinations. Just slide the feather behind your hat band and hit the town! Also available in additional assortments Assorted and Fashion. Approx. 3" - 3 3/4" Tall Size(s): One 6-pack of assorted side feathers per order. |
Close
|
Skipper Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. UPF 50+ Sun Protection Locally based out of San Diego, CA, Hemlock Hat Co brings you their specialty line of functional, outdoor hats that celebrate self-expression. Trimmed and lined with a wide array of fun, original prints, their lifeguard styles allow you to express your personal style while enjoying everything the outdoors has to offer. The new Skipper Straw Lifeguard Hat features their classic straw lifeguard hat body with a sea life-themed binding on brim, lining and Hemlock sewn patch. An adjustable chin cord adds protection during windy conditions; a stretchy and absorbent sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 3/4" Cattleman Crown 4 3/8" Downturned Brim Made of: Body - 100% Handwoven Straw Lining - 100% Polyester UPF 50+ Sun Protection - Sea Life Print Fabric Underbrim Designed in California, USA Sewn Hemlock Patch - Front Sea Life Print Fabric Binding On Brim Braided Rope Chin Cord with Wooden Adjustor Elastic Sweatband - Stretches to Fit Unlined Crown Size(s): One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 1/4 (L) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
Close
|
Starburst 3-Pleat Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a great new starburst print in varying colors, the Starburst 3-Pleat Puggaree Hat Band by Capas Headwear will give a colorful new twist to your favorite hat. Approx. 29" Total Length, End to End 1 7/8" Width Made of: 100% Polyester Instructions for Use: * Fasten the unfinished end of the pug band on the lower left side of the crown. * Wrap hatband around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hatband closest to the base of the crown. *Traditionally, men's hatbands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! |
Close
|
Polka Dot 3-Pleat Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring classic white polka dots against black, brown or navy, the Polka Dot 3-Pleat Puggaree Hat Band by Capas Headwear will add a fresh new twist to your favorite hat. For best results, please follow all instructions for use (below). Approx. 26 1/2" Total Length, End to End 1 7/8" Width Made of: 100% Cotton 3-Pleat Puggaree Hat Band Cotton Twill Fabric Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Youth Cub Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. UPF 50+ Sun Protection The new Youth Cub Straw Lifeguard Hat by Hemlock Hat Co features their classic straw lifeguard hat body but for youths! With a cheetah print-themed trim, lining and Hemlock sewn patch. A chin cord with toggle adds protection during windy conditions; a stretchy and adjustable sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 3/4" Cattleman Crown 4 1/4" Downturned Brim Made of: Body - 100% Handwoven Straw Lining - 100% Polyester Designed in California, USA Sewn Hemlock Patch - Front Cheetah Print Fabric Trimmed Brim UPF 50+ Tropical Flora Print Fabric Underbrim Cheetah Print Fabric Chin Cord with Toggle Adjustor Rust Free Eyelets Adjustable Elastic Sweatband - Adjusts Via Drawstring Unlined Crown Size(s): Youth - Fits youths ages 6-10 years approximately. Adjusts via drawstring to fit up to size 7 (56cm) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
Close
|
Youth Maverick Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. UPF 50+ Sun Protection The new Youth Maverick Straw Lifeguard Hat by Hemlock Hat Co features their classic straw lifeguard hat body but for youths! With an American flag-themed trim, lining and Hemlock sewn patch. A chin cord with toggle adds protection during windy conditions; a stretchy and adjustable sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4" Cattleman Crown 3 3/4" Downturned Brim Made of: Body - 100% Handwoven Seagrass and Rush Straw Lining - 100% Polyester Designed in California, USA Sewn Hemlock Patch - Front American Flag Print Fabric Trimmed Brim UPF 50+ American Flag Print Fabric Underbrim American Flag Print Fabric Chin Cord with Toggle Adjustor Rust Free Eyelets Adjustable Elastic Sweatband - Adjusts Via Drawstrings Unlined Crown Size(s): Youth - Fits youths ages 6-10 years approximately. Adjusts via drawstring to fit up to size 7 (56cm) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
USA: 1-888-VHS-HATS (1-888-847-4287)
INT'L: +1 619-906-4440 Se habla español
Shop for Hats at VillageHatShop.com | Privacy Policy | Website Accessibility | Site Map
Copyright © 1999-2020 Village Hat Shop: The #1 Source for Hats Online
*ALL SPECIAL OFFERS AND DISCOUNTS
Excludes wholesale/B2B, Certain Brand Restrictions, Special Orders or Where Otherwise Noted.
CONTACT USWe are happy to help! |
1 (888) 847-4287Mon-Sun 8am-4:00pm |