Close
|
Cotton Hat Sizer |
---|
Please Note: This item sells as a SINGLE sizing strip in either Black or White. Made in the USA Find yourself in-between hat sizes? Need a better fit? Prefer the added comfort of a cotton sweatband? All this can be achieved with the Cap-Ban-Nu Cotton Hat Sizer ideal for sizing your hat down by half a size! For best results, please follow all instructions for use (below). Instructions: * Remove tape backing from product. * Stick to the front section of the hat's sweatband or whatever area the hat has a loose fit (front, back or sides). You can also place the sizer behind the sweatband, directly onto the hat, or onto the backside of the sweatband. * Discard the used strip when soiled and replace. Approx. 10 3/4" Length 1" Width 2.5 MM Thick Made of: 100% Cotton Jersey Size: One single sizer per pack. One Size Fits Most. |
Close
|
Traveler Fur Felt Fedora Safari Hat |
---|
Made in Italy The Borsalino Traveler Fur Felt Fedora Safari Hat is both stylish and functional. Made of 100% brushed fur felt, this fedora is both water repellent and crushable. Easy to travel with, the Traveler Fur Felt Fedora Safari Hat can be packed into your suitcase and be ready to wear at your destination. Approx. 4 1/2" Center Pinch Crown 2 1/2" Downturned Brim Made of: 100% Fur Felt Water Repellent Crushable/Packable Underwelt Brim Leather Hat Band Borsalino Side Pin Polyester Sweatband Unlined Sizes: 55 cm (6 7/8, Small) through 63 cm (7 3/4, XX-Large), fits true to size. |
Close
|
Terry Cloth Hat Sizer |
---|
Please Note: This item sells as a SINGLE sizing strip in either Black or Tan. Made in the USA Find yourself in-between hat sizes? Need a better fit? Prefer the added comfort of a terry cloth sweatband? All this can be achieved with the Cap-Ban-Nu Terry Cloth Hat Sizer that can size your hat down half a size! For best results, please follow all instructions for use (below). Instructions: * Remove tape backing from product. * Stick to the front section of the hat's sweatband or whatever area the hat has a loose fit (front, back or sides). You can also place the sizer behind the sweatband, directly onto the hat, or onto the backside of the sweatband. * Discard the used strip when soiled and replace. Approx. 10 3/4" Length 1 1/8" Width 5 MM Thick Made of: 100% Cotton Terry Cloth Size: One single sizer per pack. One Size Fits Most. |
Close
|
Viking Helmet with Mask and Dragon |
---|
Handmade in Mexico What makes a Viking Helmet even more unique? A Dragon of course, one of the most feared and revered creatures in mythology. With the dreki or ormr on top of your head, is Ragnarok in the near future? We suggest wearing a beanie or bandana as a base layer under the helmet for comfort. Approx. 5 1/2" Crown 12" Horns (Length Can Vary) Made of: Helmet Body - 100% 22-Gauge Steel Ear Flaps & Chin Cord - 100% Leather Horns - 100% Cattle Horns Hand Welded 22 Gauge Steel Hand Sculpted Dragon and Mask Authentic Cattle Horns, Color and Shape Vary Leather Ear Flaps and Chin Cord Novelty Headwear, Not Historically Accurate Not Safety Certified as Protective Headgear Removable Foam Inserts for Size Adjustment Size(s): One Size Fits Most; fits up to size 7 1/2 (XL) comfortably. |
Close
|
Alessandria Shaved Fur Felt Fedora Hat - Black |
---|
Made in Italy Find a quality hat you can rely on with the Alessandria Shaved Fur Felt Fedora Hat from Borsalino. This quality fedora features a shaved fur felt body, as well as a comfortable leather sweatband with a smooth satin interior lining. The grosgrain ribbon hat band and side bow are a touch of style and class wrapping around the crown! Approx. 4" Center Pinch Crown 2 1/2" Snap Brim Made of: 100% Fur Felt Shaved Fur Felt Grosgrain Ribbon Hat Band with Side Bow Leather Sweatband Satin Lining Size(s): 55cm, 58cm, 59cm and 63cm; fits true to size. |
Close
|
Viking Helmet With Wings |
---|
Handmade in Mexico In Norse mythology, the valkyrie help guide the souls of deceased warriors to Valhalla. These detailed, bird-like wings will definitely help you reach the skies. We suggest wearing a beanie or bandana as a base layer under the helmet for comfort. Approx. 4 1/2" Crown 11" Wing Made of: 22 Gauge Steel 100% Leather Hand Welded 22 Gauge Steel Hand Sculpted Wings Leather Ear Flaps and Chin Cord Novelty Headwear, Not Historically Accurate Not Safety Certified as Protective Headgear Removable Foam Inserts for Size Adjustment Size(s): One Size Fits Most; fits up to size 7 1/2 (XL) comfortably. |
Close
|
Viking Helmet with Horns |
---|
Handmade in Mexico It has been recently discovered that the real Viking Helmets did not have horns. But, our customers still like them, so we still make them. Wear this to a Nordic Festival, to the movies, Vikings games, or on Halloween. Flavor Flav has taken a liking to this helmet and is seen wearing it on his VH1 show, "Flavor of Love". Raab Himself, one of Bam Margera's crew, wears this helmet as a future Civil War Soldier in a re-enactment. Most recently seen in the mini series, "Hawkeye", during a larping scene. We suggest wearing a beanie or bandana as a base layer under the helmet for comfort. Approx. 4 1/2" Crown 11" Horns (Length Can Vary) Made of: 22 Gauge Steel 100% Leather 100% Cattle Horns Hand Welded 22 Gauge Steel Authentic Cattle Horns, Color and Shape May Vary Leather Ear Flaps and Chin Cord Novelty Headwear, Not Historically Accurate Not Safety Certified as Protective Headgear Removable Foam Inserts for Size Adjustment Size(s): One Size Fits Most; fits up to size 7 1/2 (XL) comfortably. |
Close
|
Superiore Como Fur Felt Fedora Hat |
---|
Made in Italy Combine style and craftsmanship with the Superiore Como Fur Felt Fedora Hat from Borsalino. The stylish grosgrain ribbon hat band and side bow accent the crown beautifully, and the leather sweatband is something of high class. The fur felt texture is additionally gorgeous, and the satin lining is so comfortable on your head. Approx. 4 1/4" Center Pinch Crown - Front 4 1/2" Center Pinch Crown - Back 2 3/8" Snap Brim - Front 2 1/2" Snap Brim - Back Made of: 100% Fur Felt Shaved Fur Felt Texture Grosgrain Ribbon Hat Band with Bow Lapel Cord Hat Band Leather Sweatband Satin Lining Sizes: 55cm (S) - 63cm (XXL) |
Close
|
Golf Ball Hat-Tac |
---|
FINAL SALE Made in the USA Never again worry about your hats becoming misshapen, sagging, or losing their curve, thanks to the Golf Ball Hat-Tac. This revolutionary invention sticks to any surface thanks to the 3M foam adhesive backing, and the fixed curve platform allows hats to comfortably rest in an upright position. With this patented and trademarked design, your ball cap, fedora, or any other piece of headwear will never lose its curve. This is the perfect place to hang your hat! Approx. 45.5 mm High 97 mm Wide 50 mm Deep Made in the USA 3M Foam Adhesive Backing Fixed Curve Platform Golf Ball and Putting Green Print Sturdy and Reliable Works for Hats of All Sizes Manufacturer Instructions for How to Apply: * Prep surface: Take a soft wash cloth with Isopropyl or similar alcohol cleaner to create a nice clean surface for the HAT-TAC™ to stick onto. Our recommendation is to find a smooth clean surface with little texture. * After prepping the surface: Grab the tab sticking out and peel away the red backing with ease. HAT-TAC™ attaches to the wall using a foam medium hold double sided adhesive. * Position: Align your HAT-TAC™ a few centimeters off the wall, making sure to the top so is perfectly level. * Last step: Push softly, just enough to hold the HAT-TAC™ in place on the surface. Take a few steps back to make sure it is exactly where you want it positioned. If the positioning is perfect, push and hold the back side of the HAT-TAC™ to the wall firmly for 30 seconds then wait 30 minutes before hanging a hat. Manufacturer Instructions for How to Remove: * Step One: Firmly grab each side of the HAT-TAC™ with both hands. * Step Two: Slowly wiggle the HAT-TAC™ up and down to separate the adhesive back from the wall. Be careful during this step as removing too fast or incorrectly could peel paint. FINAL SALE |
Close
|
Ettore Prince of Wales Wool Ivy Cap |
---|
Please Note: Sizes for this style fit on the larger end of each generalized letter size. Please see below for details or call us at 1-888-847-4287 for assistance. S = 55cm M = 57cm L = 59cm XL = 61cm XXL = 63cm Made in Italy The Ettore Prince of Wales Wool Ivy Cap by Borsalino boasts genuine Italian craftsmanship and attention to detail. Featuring a classic ivy shape, the Ettore is crafted of the finest virgin wool with a lightweight feel great for everyday wear. Fine detailing includes a sewn Borsalino side tag, classic grosgrain ribbon sweatband, and embossed satin lining. Approx. 10 1/4" Diameter (Flat) 2" Sewn Bill Made of: 100% Virgin Wool Made in Italy Virgin Wool Lightweight Classic Ivy Design Sewn Borsalino Side Tag Grosgrain Ribbon Sweatband Borsalino Logo Embossed Satin Lining Size(s): S, M, L, XL, XXL. Sizes fit on the larger end of each generalized letter size, see sizing disclaimer at top for details. |
Close
|
Helmet with Nose Plate |
---|
Handmade in Mexico When our Viking Helmet manufacturer showed us this headgear, we thought of the Society for Creative Anachronism. We aren't sure if it's their "cup of tea" for we know that their interest in period dress is very specific. If not, were confident that some people will like this Middle Ages helmet. We suggest wearing a beanie or bandana as a base layer under the helmet for comfort. Approx. 5 1/2" Crown Made of: 22 Gauge Steel 100% Leather Hand Welded 22 Gauge Steel Hand Sculpted Nose Plate Leather Ear Flaps and Chin Cord Novelty Headwear, Not Historically Accurate Not Safety Certified as Protective Headgear Removable Foam Inserts for Size Adjustment Size(s): One Size Fits Most; fits up to size 7 1/2 (XL) comfortably. |
Close
|
Viking Helmet With Mask and Horns |
---|
Handmade in Mexico We have seen many Viking helmets and none compare to this one; a Classic Viking Helmet with a Mask. The quality of this item is unsurpassed. We suggest wearing a beanie or bandana as a base layer under the helmet for comfort. Approx. 4 3/4" Crown 12" Horns (Length Can Vary) Made of: 22 Gauge Steel 100% Leather 100% Cattle Horns Hand Welded 22 Gauge Steel Hand Sculpted Mask Authentic Cattle Horns, Color and Shape May Vary Leather Ear Flaps and Chin Cord Novelty Headwear, Not Historically Accurate Not Safety Certified as Protective Headgear Removable Foam Inserts for Size Adjustment Size(s): One Size Fits Most; fits up to size 7 1/2 (XL) comfortably. |
Close
|
San Diego Padres MLB Home Clean Up Strapback Baseball Cap Dad Hat |
---|
Garment washed for a broken-in look and feel, this low-crown relaxed baseball cap is constructed of quality cotton twill detailed with raised embroidery of the San Diego Padres MLB logo. Approx. 4 1/2" Crown, 6-Panel 2 3/4" Pre-Curved Bill Made of: 100% Washed Cotton Twill Classic 6-Panel Crown Sewn Eyelets - For Ventilation Raised Team Logo Embroidery Embroidered '47 Brand Side Hit Sewn Team Logo Tab Self-Fabric Adjustable Strap with Snap Brass Buckle Size: Adjustable - Adjusts via fabric strapback to fit sizes 7 (M) through 7 5/8 (XL) comfortably. |
Close
|
San Diego Padres MLB Trawler 47 Mesh Clean Up Snapback Baseball Cap |
---|
Featuring a soft classic 6-panel crown, 4 of which are mesh, the San Diego Padres MLB Trawler 47 Mesh Clean Up Snapback Baseball Cap is all about comfort and relaxation. The front 2 panels are made of 100% cotton with a garment-washed twill finish, sewn eyelets and are adorned with an embroidered logo at the front. An embroidered '47 Brand side hit, adjustable snapback, cotton twill sweatband and inseam taping complete this easy-going baseball cap. Approx. 3 3/4" 6-Panel Crown 2 3/4" Pre-Curved Bill Made of: 100% Cotton - Washed Garment Twill Finish (Not Including Mesh Panels) Officially Licensed Soft 6-Panel Crown 4 Mesh Panels 2 Fabric Panels Sewn Eyelets for Ventilation Team Logo Raised Embroidery Embroidered '47 Brand Side Hit Adjustable Snapback Cotton Twill Sweatband Inseam Taping Unlined Size(s): Adjustable - Fits up to size 7 1/2 (XL) comfortable. Adjust using snapback. |
Close
|
Viking Helmet with Spike and Mask |
---|
Handmade in Mexico This hornless Helmet with mask is made by the same craftsman who fashions the Viking Classic and Viking Dragon. A 1 1/2" spike points skyward from the crown's center. Put on 50 lbs of armor and you're ready to go! We suggest wearing a beanie or bandana as a base layer under the helmet for comfort. Approx. 6" Crown (Including Spike) Made of: 22 Gauge Steel 100% Leather Hand Welded 22 Gauge Steel Hand Sculpted Mask and Spike Leather Ear Flaps and Chin Cord Novelty Headwear, Not Historically Accurate Not Safety Certified as Protective Headgear Removable Foam Inserts for Size Adjustment Size(s): One Size Fits Most; fits up to size 7 1/2 (XL) comfortably. |
Close
|
Las Vegas Raiders NFL Clean Up Legacy Strapback Baseball Cap Dad Hat |
---|
Garment-washed for a broken-in look and feel, this low-crown relaxed Las Vegas Raiders NFL Clean Up Legacy Strapback Baseball Cap Dad Hat is constructed of quality cotton twill detailed with raised embroidery of the Las Vegas Raiders NFL Legacy logo. The perfect hat to elevate your spirit and support your favorite team! Approx. 4 1/2" Crown, 6-Panel 2 3/4" Pre-Curved Bill Made of: 100% Washed Cotton Twill Classic 6-Panel Crown Sewn Eyelets - For Ventilation Raised Team Legacy Logo Embroidery Embroidered '47 Brand Side Hit Sewn Team Logo Tab Self-Fabric Adjustable Strap with Snap Brass Buckle Size: Adjustable - Adjusts via fabric strapback to fit sizes 56 cm (size 7, Medium) to 61 cm (7 5/8, X-Large) comfortably. |
Close
|
New York Mets MLB Foam Mesh Trucker Snapback Baseball Cap |
---|
Featuring a 5-panel crown, the New York Mets MLB Foam Mesh Trucker Snapback Baseball Cap is an extra comfy cap thanks to the foam finish on the front panel and bill. An embroidered logo adorns the foam panel while an embroidered '47 Brand side hit is featured on a mesh side panel. A cord hat band, adjustable snapback, cotton twill sweatband and inseam taping complete this look. Approx. 4 1/2" 6-Panel Crown 3 1/8" Pre-Curved Bill Made of: 100% Polyester Officially Licensed 5-Panel Crown 4 Mesh Panels 1 Foam Panel Team Logo Raised Embroidery Embroidered '47 Brand Side Hit Cord Hat Band Top Button Adjustable Snapback Cotton Twill Sweatband Inseam Taping Unlined Size(s): Adjustable - Fits up to size 7 1/2 (XL) comfortable. Adjust using snapback. |
Close
|
Green Bay Packers NFL Clean Up Strapback Baseball Cap Dad Hat |
---|
Garment washed for a broken-in look and feel, this dark green low-crown relaxed baseball cap is constructed of quality cotton twill detailed with raised embroidery of the Green Bay Packers NFL logo. Approx. 4 1/2" Crown, 6-Panel 2 3/4" Pre-Curved Bill Made of: 100% Washed Cotton Twill Classic 6-Panel Crown Sewn Eyelets - For Ventilation Raised Team Logo Embroidery Embroidered '47 Brand Side Hit Sewn Team Logo Tab Self-Fabric Adjustable Strap w/ Snap Brass Buckle Size: Adjustable - Adjusts via fabric strapback to fit up to size 7 5/8 (XL) comfortably. |
Close
|
Milwaukee Brewers MLB Clean Up Strapback Baseball Cap Dad Hat |
---|
The Milwaukee Brewers MLB Clean Up Strapback Baseball Cap Dad Hat by 47 Brand is garment washed and unstructured for comfort. This cap is officially licensed and is embroidered with the Milwaukee Brewers logo at the front and a small 47 Brand side hit. Its relaxed, dad hat style features an unstructured and low-profile 6-panel crown and is finished with a pre-curved bill and self-fabric strapback adjuster. Approx. 4" Soft Crown 2 5/8" Pre-Curved Bill Made of: 100% Cotton Twill Officially Licensed Garment Washed Finish Soft & Unstructured 6-Panel Crown Embroidered Team Logo - Front Embroidered '47 Brand Side Hit Adjustable Self-Fabric Strapback Cotton Twill Sweatband Unlined Size: Adjustable - Adjusts via fabric strapback to fit sizes 56 cm (size 7, Medium) to 61 cm (7 5/8, X-Large) comfortably. |
Close
|
Tampa Bay Rays MLB Foam Mesh Trucker Snapback Baseball Cap |
---|
Featuring a 5-panel crown, the Tampa Bay Rays MLB Foam Mesh Trucker Snapback Baseball Cap is an extra comfy cap thanks to the foam finish on the front panel and bill. An embroidered logo adorns the foam panel while an embroidered '47 Brand side hit is featured on a mesh side panel. A cord hat band, adjustable snapback, cotton twill sweatband and inseam taping complete this look. Approx. 4 1/2" 6-Panel Crown 3 1/8" Pre-Curved Bill Made of: 100% Polyester Officially Licensed 5-Panel Crown 4 Mesh Panels 1 Foam Panel Team Logo Raised Embroidery Embroidered '47 Brand Side Hit Cord Hat Band Top Button Adjustable Snapback Cotton Twill Sweatband Inseam Taping Unlined Size(s): Adjustable - Fits up to size 7 1/2 (XL) comfortable. Adjust using snapback. |
Close
|
Cleveland Guardians MLB Foam Mesh Trucker Snapback Baseball Cap |
---|
Featuring a 5-panel crown, the Cleveland Guardians MLB Foam Mesh Trucker Snapback Baseball Cap is an extra comfy cap thanks to the foam finish on the front panel and bill. An embroidered logo adorns the foam panel while an embroidered '47 Brand side hit is featured on a mesh side panel. A cord hat band, adjustable snapback, cotton twill sweatband and inseam taping complete this look. Approx. 4 1/2" 6-Panel Crown 3 1/8" Pre-Curved Bill Made of: 100% Polyester Officially Licensed 5-Panel Crown 4 Mesh Panels 1 Foam Panel Team Logo Raised Embroidery Embroidered '47 Brand Side Hit Cord Hat Band Top Button Adjustable Snapback Cotton Twill Sweatband Inseam Taping Unlined Size(s): Adjustable - Fits up to size 7 1/2 (XL) comfortable. Adjust using snapback. |
Close
|
Pittsburgh Pirates MLB Clean Up Strapback Baseball Cap Dad Hat |
---|
Garment washed for a broken-in look and feel, this low-crown relaxed baseball cap is constructed of quality cotton twill detailed with raised embroidery of the Pittsburgh Pirates MLB logo. Approx. 4 1/2" Crown, 6-Panel 2 3/4" Pre-curved Bill Made of: 100% Washed Cotton Twill Six panel crown with eyelets Raised Embroidered Team Logo Embroidery '47 Brand Side Hit Sewn Team Logo Tab Self-Fabric Adjustable Strap with Snap Brass Buckle Cotton Sweatband Size: Adjustable - Adjusts via fabric strapback to fit sizes 56 cm (size 7, Medium) to 61 cm (7 5/8, X-Large) comfortably. |
Close
|
Houston Astros MLB Foam Mesh Trucker Snapback Baseball Cap |
---|
Featuring a 5-panel crown, the Houston Astros MLB Foam Mesh Trucker Snapback Baseball Cap is an extra comfy cap thanks to the foam finish on the front panel and bill. An embroidered logo adorns the foam panel while an embroidered '47 Brand side hit is featured on a mesh side panel. A cord hat band, adjustable snapback, cotton twill sweatband and inseam taping complete this look. Approx. 4 1/2" 6-Panel Crown 3 1/8" Pre-Curved Bill Made of: 100% Polyester Officially Licensed 5-Panel Crown 4 Mesh Panels 1 Foam Panel Team Logo Raised Embroidery Embroidered '47 Brand Side Hit Cord Hat Band Top Button Adjustable Snapback Cotton Twill Sweatband Inseam Taping Unlined Size(s): Adjustable - Fits up to size 7 1/2 (XL) comfortable. Adjust using snapback. |
Close
|
Kansas City Royals MLB Cooperstown Clean Up Strapback Baseball Cap |
---|
The Kansas City Royals MLB Cooperstown Clean Up Strapback Baseball Cap by 47 Brand is garment washed and unstructured for comfort. This cap is officially licensed and is embellished with the Royals' retro MLB logo embroidered at the front and a small 47 Brand side hit embroidered at the side. Its relaxed, dad hat style features an unstructured and low-profile 6-panel crown and is finished with a pre-curved bill and self-fabric strapback adjuster. Show your team spirit with the retro Kansas City Royals MLB Cooperstown Clean Up Strapback Baseball Cap by 47 Brand! Approx. 4" Soft Crown 2 5/8" Pre-Curved Bill Made of: 100% Cotton Twill Officially Licensed Garment Washed Finish Soft & Unstructured 6-Panel Crown Sewn Ventilation Eyelets Embroidered Retro Cooperstown Team Logo - Front Embroidered '47 Brand Side Hit Adjustable Self-Fabric Strapback Cotton Twill Sweatband Unlined Size: Adjustable - Adjusts via fabric strapback to fit sizes 56 cm (size 7, Medium) to 61 cm (7 5/8, X-Large) comfortably. |
Close
|
Minnesota Twins MLB Foam Mesh Trucker Snapback Baseball Cap |
---|
Featuring a 5-panel crown, the Minnesota Twins MLB Foam Mesh Trucker Snapback Baseball Cap is an extra comfy cap thanks to the foam finish on the front panel and bill. An embroidered logo adorns the foam panel while an embroidered '47 Brand side hit is featured on a mesh side panel. A cord hat band, adjustable snapback, cotton twill sweatband and inseam taping complete this look. Approx. 4 1/2" 6-Panel Crown 3 1/8" Pre-Curved Bill Made of: 100% Polyester Officially Licensed 5-Panel Crown 4 Mesh Panels 1 Foam Panel Team Logo Raised Embroidery Embroidered '47 Brand Side Hit Cord Hat Band Top Button Adjustable Snapback Cotton Twill Sweatband Inseam Taping Unlined Size(s): Adjustable - Fits up to size 7 1/2 (XL) comfortable. Adjust using snapback. |
Close
|
Chicago Bears NFL Clean Up Strapback Baseball Cap Dad Hat |
---|
Garment washed for a broken-in look and feel, this navy blue low-crown relaxed baseball cap is constructed of quality cotton twill detailed with raised embroidery of the Chicago Bears NFL logo. Approx. 4 1/2" Crown, 6-Panel 2 3/4" Pre-Curved Bill Made of: 100% Washed Cotton Twill Classic 6-Panel Crown Sewn Eyelets - For Ventilation Raised Team Logo Embroidery Embroidered '47 Brand Side Hit Sewn Team Logo Tab Self-Fabric Adjustable Strap with Snap Brass Buckle Size: Adjustable - Adjusts via fabric strapback to fit sizes 56 cm (size 7, Medium) to 61 cm (7 5/8, X-Large) comfortably. |
Close
|
Atlanta Braves MLB Clean Up Strapback Baseball Cap Dad Hat |
---|
Garment washed for a broken-in look and feel, this navy and red low-crown relaxed baseball cap is constructed of quality cotton twill detailed with raised embroidery of the Atlanta Braves logo. Approx. 4 1/2" Crown, 6-Panel 2 3/4" Pre-curved Bill Made of: 100% Washed Cotton Twill Self fabric strap with adjustable snap brass buckle Raised logo embroidery Six panel crown with eyelets 47 embroidery side hit Sewn logo tab Size: Adjustable - Adjusts via fabric strapback to fit sizes 56 cm (size 7, Medium) to 61 cm (7 5/8, X-Large) comfortably. |
Close
|
Los Angeles Angels MLB Foam Mesh Trucker Snapback Baseball Cap |
---|
Featuring a 5-panel crown, the Los Angeles Angels MLB Foam Mesh Trucker Snapback Baseball Cap is an extra comfy cap thanks to the foam finish on the front panel and bill. An embroidered logo adorns the foam panel while an embroidered '47 Brand side hit is featured on a mesh side panel. A cord hat band, adjustable snapback, cotton twill sweatband and inseam taping complete this look. Approx. 4 1/2" 6-Panel Crown 3 1/8" Pre-Curved Bill Made of: 100% Polyester Officially Licensed 5-Panel Crown 4 Mesh Panels 1 Foam Panel Team Logo Raised Embroidery Embroidered '47 Brand Side Hit Cord Hat Band Top Button Adjustable Snapback Cotton Twill Sweatband Inseam Taping Unlined Size(s): Adjustable - Fits up to size 7 1/2 (XL) comfortable. Adjust using snapback. |
USA: 1-888-VHS-HATS (1-888-847-4287)
INT'L: +1 619-906-4440 Se habla español
Shop for Hats at VillageHatShop.com | Privacy Policy | Website Accessibility | Site Map
Copyright © 1999-2020 Village Hat Shop: The #1 Source for Hats Online
*ALL SPECIAL OFFERS AND DISCOUNTS
Excludes wholesale/B2B, Certain Brand Restrictions, Special Orders or Where Otherwise Noted.
CONTACT USWe are happy to help! |
1 (888) 847-4287Mon-Sun 8am-4:00pm |