Close
|
Heritage Collection 1910s Montana Peak Campaign Wool Felt Hat |
---|
Made in the USA The 1910's saw the advent of a true piece of Americana in the Montana Peak Hat (Campaign Hat). Its popularity "peaked" on September 8th, 1911 when it was adopted by the United States Army. What began as a military standard has since become a symbol of both protection and conservation as uniforms of state troopers and park rangers nationwide. The Montana Peak has run the gamut from civic service to the great outdoors. And as the Great War loomed, the Bollman Hat Company produced these hats in abundance for the U.S. Army. These historical hats are still produced by Bollman today. Approx. 5" Montana Peak Crown 3" Flat Brim Made of: 100% Wool Felt Made in the USA Grosgrain Ribbon Hat Band with Side Bow Badge/Ventilation Eyelets Leather Chincord Printed Leather Sweatband Raw Edge Brim Custom 140th Lining Sizes: S, M, L, and XL; fits true to size. |
Close
|
Heritage Collection 1860s Wide Awake Wool Felt Hat |
---|
Made in the USA Bollman Hat Company digs deep into the annals of its history to capture and commemorate this long forgotten style. The Wide Awake hat was inspired by the paramilitary campaign organization of the 1860s. The Wide Awakes, affiliated with the Republican Party during the 1860 election, supported Abraham Lincoln and the Union while strongly opposing slavery. The Wide Awakes were well-drilled and served as political police in escorting party speakers and in preserving order at party demonstrations and had over 400,000 estimated members. The standard Wide Awake uniform consisted of a full robe or cape, a torch, and of course the black hat for which we pay tribute. The Bollman Hat Company produced this hat and all of their hats in black only when George Bollman and Isaac Sowers first opened their hat factory in Adamstown, Pennsylvania in 1868. Approx. 3 1/2" Curled Brim 4" Round Crown Made of: 100% Wool Felt Made in the USA Grosgrain Ribbon Hat Band Grosgrain Ribbon Bound Brim Printed Leather Sweatband Custom 140th Lining Sizes: S, M, L and XL; fits true to size. |
Close
|
Liberty Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. UPF 50+ Sun Protection Locally based out of San Diego, CA, Hemlock Hat Co brings you their specialty line of functional, outdoor hats that celebrate self-expression. Trimmed and lined with a wide array of fun, original prints, their lifeguard styles allow you to express your personal style while enjoying everything the outdoors has to offer. The new Liberty Straw Lifeguard Hat features their classic straw lifeguard hat body with a American flag-themed binding on brim, lining and Hemlock sewn patch. An adjustable chin cord adds protection during windy conditions; a stretchy and absorbent sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 3/4" Cattleman Crown 4 1/4" Downturned Brim Made of: Body - 100% Handwoven Straw Lining - 100% Polyester UPF 50+ Sun Protection - American Flag Print Fabric Underbrim Designed in California, USA Sewn Hemlock Patch - Front American Flag Print Fabric Binding On Brim Braided Rope Chin Cord with Wooden Adjustor Elastic Sweatband - Stretches to Fit Unlined Crown Size(s): One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 1/4 (L) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
Close
|
Mariner Rush Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. UPF 50+ Sun Protection Locally based out of San Diego, CA, Hemlock Hat Co brings you their specialty line of functional, outdoor hats that celebrate self-expression. Trimmed and lined with a wide array of fun, original prints, their lifeguard styles allow you to express your personal style while enjoying everything the outdoors has to offer. The new Mariner Rush Straw Lifeguard Hat features their classic straw lifeguard hat body with underwater-themed binding on brim, underbrim and Hemlock sewn patch. An adjustable chin cord adds protection during windy conditions; a stretchy and absorbent sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 3/4" Cattleman Crown 4 1/2" Downturned Brim Made of: Body - 100% Handwoven Rush Straw Lining - 100% Polyester UPF 50+ Sun Protection - Underwater Print Fabric Underbrim Designed in California, USA Sewn Hemlock Patch - Front Underwater Print Fabric Binding On Brim Braided Rope Chin Cord with Wooden Adjustor Elastic Sweatband - Stretches to Fit Unlined Crown Size(s): One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 1/4 (L) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
Close
|
Heritage Collection 1900s Homburg |
---|
Made in the USA About the time of Bollman Hat Company's Founder's death in 1900 and beginning of the leadership of his son George W. Bollman, the Homburg hat was taking its place in hat style history. Popularized in England by Edward VII after visiting Germany and bringing one back as a keepsake, the Homburg is one of the oldest formally-styled hats. As the King of England from 1901 to 1910, Edward was known as "The Peacemaker" for his efforts in fostering good relations between England and other European countries. Perhaps the Homburg was a perk of the King's diplomatic successes, but the style enjoyed its own surprising success in Great Britain and in America. The Homburg resurfaced in the 1970's as the "Godfather" and eventually became an early staple of the hip-hop movement. The Bollman Hat Company contributed its own color and flair during each phase of the Homburg's evolution. Bollman was integral to developing the style's current counter-cultural appeal by creating a variety of diverse colors including sugar pink, burnt orange, lime green and lemon yellow. Approx. 4 1/4" Center Dent Crown 2 3/4" Curled Brim Made of: 100% Wool Felt Printed Leather Sweatband Custom 140th Lining Sizes: S, M, L, and XL; fits true to size. |
Close
|
Heritage Collection 1940s Pork Pie Hat |
---|
Made in the USA A standard during Jazz's glory age, the Pork Pie gained relevance during a time of worldly transition, as evidenced by its growing popularity among celebrities and public figures. Physicist Robert Oppenheimer regularly wore a pork pie hat during his field studies. Jamaican ska artist Laurel Aitken even wrote the tune "Give Me Back My Pork Pie Hat" as a tribute. Its namesake inspired by the British delicacy, the Pork Pie's distinctive dents around the crown and low flat top was a comfortable look in an unsettling time. Dozens of Bollman Hat Company employees gave their lives serving their country in World War II. The third generation of Bollman family now led the Company and kept in touch with employees serving in the military, and provided regular updates to it's workforce at home on those lost in action, in captivity, injured and those returning home. Some of these letters have been preserved and hang in the hall of the Company's main office today. Approx. 3 1/2" Telescope Crown 2" Underwelt Snap Brim Made of: 100% Wool Felt Printed Leather Sweatband Custom 140th Lining Sizes: S, M, L, and XL; fits true to size. |
Close
|
Blackout Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. Locally based out of San Diego, CA, Hemlock Hat Co brings you their specialty line of functional, outdoor hats that celebrate self-expression. Trimmed and lined with a wide array of fun, original prints, their lifeguard styles allow you to express your personal style while enjoying everything the outdoors has to offer. The new Blackout Straw Lifeguard Hat features their classic straw lifeguard hat body with a black-colored trim, lining and Hemlock sewn patch. An adjustable chincord adds protection during windy conditions; a stretchy and absorbent sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 3/4" Cattleman Crown 4 5/8" Downturned Brim Made of: Body - 100% Handwoven Seagrass and Rush Straw Lining - 100% Polyester Designed in California, USA Sewn Hemlock Patch - Front Blackout Print Fabric Trimmed Brim UPF 50+ Blackout Print Fabric Underbrim Braided Rope Chin Cord with Wooden Adjustor Elastic Sweatband - Stretches to Fit Unlined Crown Size(s): One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 1/4 (L) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
Close
|
Traveler Fur Felt Fedora Safari Hat |
---|
Made in Italy The Borsalino Traveler Fur Felt Fedora Safari Hat is both stylish and functional. Made of 100% brushed fur felt, this fedora is both water repellent and crushable. Easy to travel with, the Traveler Fur Felt Fedora Safari Hat can be packed into your suitcase and be ready to wear at your destination. Approx. 4 1/2" Center Pinch Crown 2 1/2" Downturned Brim Made of: 100% Fur Felt Water Repellent Crushable/Packable Underwelt Brim Leather Hat Band Borsalino Side Pin Polyester Sweatband Unlined Sizes: 55 cm (6 7/8, Small) through 63 cm (7 3/4, XX-Large), fits true to size. |
Close
|
Heritage Collection 1920s Fedora Hat |
---|
Made in the USA The "Roaring Twenties", as the decade is affectionately dubbed, saw an explosion of rich cultural activity, brought on by unprecedented economic prosperity. Gangsters, flappers, speakeasies, jazz and the Charleston were sweeping the nation. Fashion likewise grew by leaps and bounds during this time, as the public became less and less inhibited by prior social standards. People were finally "letting loose" by donning such aesthetically-audacious ensembles. The term Fedora was in use as early as 1891 but the style really took off in the Twenties, topping off men's fashion during a golden age. The Fedora featured a pinched crown with the brim turned down in the front and up in the back. This complimented the women's Cloche style. Indeed, blithe indulgence marked this decade. And once again, Bollman was there indulging hat lovers with headwear that made a personal fashion statement and truly captured the exuberance of America at the time. The Fedora has evolved and endured and Bollman has produced more varieties of the Fedora than any other style in it's history. Approx. 4" Center Pinch Crown 2 1/2" Underwelt Brim Made of: 100% Wool Felt Printed Leather Sweatband Custom 140th Lining Sizes: S, M, L, and XL; fits true to size. |
Close
|
Kepi Wool Civil War Cap |
---|
Keep the calvary drum beating and your musket smoking with Jacobson's Kepi Civil War Cap. A replica of the caps worn by men at arms during the Civil War era, this cap makes a great costume hat. Complete with musket pendant at its front, the Kepi Cap gives you the era-appropriate look without breaking the bank. Not historically accurate, hat is a novelty item. Approx. 2 1/2" Front 4 1/2" Back Crown 2 1/2" Bill/Visor Made of: 100% Wool Musket Pendant Hat Band with Side Buttons Cotton Sweatband Unlined Sizes: 7 to 7 1/2; fits true to size. |
Close
|
Heritage Collection 1930s Fur Felt Trilby Fedora Hat |
---|
Made in the USA The flamboyance and fast times of the 1920's gave way to a much more somber climate in the 1930's. The Stock Market Crash of 1929 ushered in a decade best remembered as a national crisis of unseen magnitude. What today is known as The Great Depression was undoubtedly a period of unparalleled uncertainty, but one that would instill great character and fortitude in the American public. As this major recession set in, fashion evolved likewise, resulting in a more modestly-styled look befitting the national mood. Bollman produced The Trilby which toned down the wide brim and softened the sharp lines of the Fedora. The Trilby or Snap Brim hat became the all purpose dress felt hat, cutting across class strata in America and Europe. To meet the demand, Bollman vertically integrated and began carbonizing and scouring the wool used in felt hats during this decade. Approx. 4" Center Dent Crown 1 7/8" Snap Brim Made of: 100% Genuine Fur Felt Made in the USA Grosgrain Ribbon Hat Band with Side Bow Side Feather Printed Leather Sweatband Stitched Edge Binding on Brim Custom 140th Lining Sizes: S, M, L, and XL; fits true to size. |
Close
|
Heritage Collection 1990s Wool Felt Outback Hat |
---|
Made in the USA All things Aussie and the Australian-inspired Outback was an essential part of fashion in the 1990's. The LiteFelt invented by Bollman Hat Company in 1987 revolutionized the hat industry during this time of economic prosperity and the number one shape was the Outback. This shape topped off a fashion trend that included long duster coats as the "down under" look and attitude grew in scope and popularity. Bollman produced some 6,000,000 LiteFelt hats in the 1990's providing the world with fashion, function and fun! The LiteFelt is water repellent, shape retentive and conforms to the wearer's head making it functional and extremely comfortable. Today, the LiteFelt is made in fashion, western and classic silhouettes. Approx. 4" C-Crown (Teardrop) 2 7/8" Curved Brim Made of: 100% Wool Crushable LiteFelt® Made in the USA Crushable/Packable Premium LiteFelt® Finish - Soft, Packable & Water Repellent Genuine Leather Hat Band Printed Leather Sweatband Underwelt Brim Custom 140th Lining Sizes: S, M, L and XL; fits true to size. |
Close
|
Heritage Collection 1950s Roy |
---|
Made in the USA The King of the Cowboys, Roy Rogers, was a famous singer and cowboy actor during the days of television. He and his third wife Dale Evans (the Queen of the West), his golden palomino Trigger, and his German Shepard Bullet, were featured in over one hundred movies and The Roy Rogers Show which ran on radio for nine years before moving to television from 1951 through 1957. In post-war America, Roy was the embodiment of the western hero. For the Bollman Hat Company, he was a champion of headwear on both the big and small screen. Roy Rogers visited the Bollman factory in 1960 to express gratitude to Bollman Employees for providing him with his signature hat. It was quite a day in Adamstown as Rogers was a beloved figure. Upon addressing the employees, Roy toured the factory, signed autographs and posed with children from the community. Approx. 4 5/8" C-Crown (Teardrop) 4" Raw Edge Curled Brim Made of: 100% Wool Felt Printed Leather Sweatband Custom 140th Lining Hat Box and Certificate Included Sizes: S, M, L, and XL; fits true to size. |
Close
|
Mexican Palm Straw Sombrero |
---|
Please Note: This item is not available for shipping outside of the United States and cannot be expedited. Made in Mexico The Mexican Sombrero is one of the better known hats in the world. This one is made in Mexico with the palm straw that is usually associated with this style. Featuring a chincord, this fun hat will stay on even in windy weather. Approx. 7 1/2" Crown 6 1/4" Brim Made of: 100% Palm Leaf Straw Made in Mexico Polyester Trim on Crown Two-Tone Weave Along Edge Chincord Unlined Lightweight Size: One Size Fits Most - Fits up to size 7 3/8 (L) comfortably. For Wholesale/B2B purchase of this hat, CLICK HERE or call us at 1-888-847-4287. |
Close
|
Heritage Collection 1980s Uptown Girl Wool Felt Hat |
---|
Made in the USA Elaborate designs and bright colors were in vogue in the 1980's. This was a decade in which clothes became a major signifier for financial success and prosperity. Flash and flare were used to show that a person was part of the "better off" crowd. Billy Joel's tune "Uptown Girl" tells the story of a well-to-do young woman and this Bollman hat with the same name is a hat she might have worn. The 1980s Uptown Girl Wool Felt Hat by Bollman features a flat crown, bold wide brim and a vintage woven hat band with a triangle design accented with a plume of black feathers on bright purple felt. Approx. 3 3/4" Flat Crown 2 3/4" Flat Brim Made of: 100% Wool Felt Made in the USA Custom Satin Bollman Lining Feather Decoration Triangle Woven Hat Band Grosgrain Ribbon Sweatband Underwelt Brim Hat Box and Certificate Included Sizes: S/M and L/XL; fits true to size. |
Close
|
Stampede String Chin Strap |
---|
Made in the USA Hold on to your hat! Chin cord/straps, known in cattle country as stampede strings, ensure against the loss of your hat in wind or brush. The Stampede String Chin Strap isn't only for ranchers working cattle on the open range. Anyone who wants to keep their hat from blowing away will find it useful. Featuring a sliding knot that joins together two, four plait braids of leather, this chin cord/strap is practical and looks great! How it works: Two cotter pins slide between the sweatband and the hat body. Once bent, they provide a secure attachment of the stampede string. Approx. 19" Length (Excluding End Pins) Made of: 100% Kangaroo Leather Sliding Knot Four Plait Braided Leather on Each String Size: One Size Fits Most Manufacturer Instructions for Use: * Hold the cotter pins tightly together and push them through the stitching where the sweatband meets the body. * Pull the pins completely through the base of the sweatband until the braid is firmly against the sweatband. * Spread the pins outward, as close to horizontal as possible. * Check by tugging on the braid. |
Close
|
Youth Cub Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. UPF 50+ Sun Protection The new Youth Cub Straw Lifeguard Hat by Hemlock Hat Co features their classic straw lifeguard hat body but for youths! With a cheetah print-themed trim, lining and Hemlock sewn patch. A chin cord with toggle adds protection during windy conditions; a stretchy and adjustable sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 3/4" Cattleman Crown 4 1/4" Downturned Brim Made of: Body - 100% Handwoven Straw Lining - 100% Polyester Designed in California, USA Sewn Hemlock Patch - Front Cheetah Print Fabric Trimmed Brim UPF 50+ Tropical Flora Print Fabric Underbrim Cheetah Print Fabric Chin Cord with Toggle Adjustor Rust Free Eyelets Adjustable Elastic Sweatband - Adjusts Via Drawstring Unlined Crown Size(s): Youth - Fits youths ages 6-10 years approximately. Adjusts via drawstring to fit up to size 7 (56cm) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
Close
|
Roughage NASA Mesh Trucker Snapback Baseball Cap |
---|
Houston, we have a great hat! Once again, American Needle knocks it out of the park with the Roughage NASA Mesh Trucker Snapback Baseball Cap. The sewn eyelets and mesh back panels ensure this hat is as breathable as can be, and the NASA patch on front is so trendy right now. For all your adventures, pick this great cap. Approx. 4 3/4" Crown 2 3/4" Pre-Curved Stiff Brim Made of: 100% Cotton (Brim and Front 2 Panels) 100% Polyester Mesh (Back 4 Crown Panels) Classic 6-Panel Crown Breathable Sewn Eyelets - Front (2) Panels Buckram-Supported Front Panels (2) Breathable Mesh Back Panels (4) NASA Patch Cotton Twill Sweatband Unlined Size: Adjustable - Adjusts via plastic snapback to fit up to size 7 3/4 (XXL) comfortably. |
Close
|
Pizza Hat |
---|
What do you take on your pizza? Topped with the works, Jacobson's Pizza Hat is deliciously pie-tastic! Wear it on National Pizza Day, February 9th, or just because! Who doesn't love pizza? As seen in the film, "Everything Everywhere All at Once". Approx. 14” Diameter Made of: 100% Polyester - Velour Finish Felt Toppings Elastic Base - Stretches to Fit Mesh Lining Size: One Size Fits Most, fits up to size 7 1/4 (L) comfortably. |
Close
|
Skipper Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. UPF 50+ Sun Protection Locally based out of San Diego, CA, Hemlock Hat Co brings you their specialty line of functional, outdoor hats that celebrate self-expression. Trimmed and lined with a wide array of fun, original prints, their lifeguard styles allow you to express your personal style while enjoying everything the outdoors has to offer. The new Skipper Straw Lifeguard Hat features their classic straw lifeguard hat body with a sea life-themed binding on brim, lining and Hemlock sewn patch. An adjustable chin cord adds protection during windy conditions; a stretchy and absorbent sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 3/4" Cattleman Crown 4 3/8" Downturned Brim Made of: Body - 100% Handwoven Straw Lining - 100% Polyester UPF 50+ Sun Protection - Sea Life Print Fabric Underbrim Designed in California, USA Sewn Hemlock Patch - Front Sea Life Print Fabric Binding On Brim Braided Rope Chin Cord with Wooden Adjustor Elastic Sweatband - Stretches to Fit Unlined Crown Size(s): One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 1/4 (L) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
Close
|
Hamburger Hat |
---|
“Where’s the Beef?” Atop your head, with the Hamburger hat, you won’t need any helper. This hat comes stacked with all the classics - lettuce, tomato, onion, cheese and sesame seed bun to complete this appetizing hat. Approx. 12 1/2" Diameter Made of: 100% Polyester Faux Fur Finish Sesame Seed Bun Patty, Cheese, Lettuce, Tomato, & Onion Adjustable Lining Lightweight Crushable / Packable Size: One Size Fits Most - Fits up to 7 5/8 (XL) comfortably. For Wholesale/B2B purchase of this style, CLICK HERE or call us at 1-888-847-4287. |
Close
|
Sazerac Mesh Swinger Hat - Black/Multi |
---|
FINAL SALE Who says dressy can't be fun? The Kentucky Derby's Sazerac Mesh Swinger Hat is crafted of lightweight mesh and "straw" perfect for warm spring and summers months. A "straw" crown accented with a self hat band contrasts with its wide, asymmetric brim made of mesh with "straw" stripes throughout. Lush flowers made of black and multi-colored feathers complete the Sazerac's singular look. Inside, its drawstring sweatband may be easily adjusted for a comfortable and customized fit. Skip the plain old black hat this season - go with the Sazerac Mesh Swinger Hat by Scala for a fun pop of color that'll add the perfect finishing touch to your dressy look! Approx. 4 5/8" Round Crown 8 1/4" Asymmetric Brim - Front 8" Asymmetric Brim - Sides 6" Asymmetric Brim - Back Made of: 100% Polyester "Straw" Crown with Self Hat Band Mesh Brim with "Straw" Stripes Black & Multicolored Feather Flower Detail Drawstring Grosgrain Sweatband - Adjusts to Fit Unlined Lightweight Breathable Size: One Size Fits Most - Adjusts to fit sizes 6 3/4 (XS) - 7 1/8 (M) comfortably. Adjusts via inner drawstring sweatband. |
Close
|
Superiore Como Fur Felt Fedora Hat |
---|
Made in Italy Combine style and craftsmanship with the Superiore Como Fur Felt Fedora Hat from Borsalino. The stylish grosgrain ribbon hat band and side bow accent the crown beautifully, and the leather sweatband is something of high class. The fur felt texture is additionally gorgeous, and the satin lining is so comfortable on your head. Approx. 4 1/4" Center Pinch Crown - Front 4 1/2" Center Pinch Crown - Back 2 3/8" Snap Brim - Front 2 1/2" Snap Brim - Back Made of: 100% Fur Felt Shaved Fur Felt Texture Grosgrain Ribbon Hat Band with Bow Lapel Cord Hat Band Leather Sweatband Satin Lining Sizes: 55cm (S) - 63cm (XXL) |
Close
|
Heritage Collection 2010s Jockey Cap |
---|
Made in the USA The Bollman Jockey Hat is a wool felt cap with matching, edge-stitched grosgrain ribbon in a luxurious burnt orange color. This cap is made of luxe, wool felt and is reminiscent of the riding cap. Combining vintage styling with modern craftsmanship, this Jockey Hat became popular in 2010. Approx. 1 1/2" Bill Made of: 100% Wool Felt Made in the USA Custom Satin Bollman Lining Two Tone Grosgrain Ribbon Hat Band Grosgrain Ribbon Sweatband Upside Down Bow at Back Hat Box and Certificate Included Sizes: S/M and L/XL; fits true to size. |
Close
|
Chauffeur Cap |
---|
Please Note: Sizes fit on the low end of the size range. Small = 6 3/4 Medium = 7 Large = 7 1/4 Made in the USA Do you chauffeur people around on a daily basis? Make it official with this black Chauffeur Cap by Jacobson. Complete with a faux patent leather bill, this cap is great for proms, weddings or any occasion requiring a professional-looking driver. This cap is great as a costume or prop. Approx. 3" Crown 2 1/4" Pre-Curved Bill Made of: Cotton/Polyester Blend Made in the USA Faux Patent Leather Bill Cotton Blend Sweatband Unlined Lightweight Sizes: S, M, and L; runs small, please see size information at top of product details. |
Close
|
Wyatt Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. UPF 50+ Sun Protection Locally based out of San Diego, CA, Hemlock Hat Co brings you their specialty line of functional, outdoor hats that celebrate self-expression. Trimmed and lined with a wide array of fun, original prints, their lifeguard styles allow you to express your personal style while enjoying everything the outdoors has to offer. The new Wyatt Straw Lifeguard Hat features their classic straw lifeguard hat body with an bandana patchwork-themed binding on brim, lining and Hemlock sewn patch. An adjustable chin cord adds protection during windy conditions; a stretchy and absorbent sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 7/8" Cattleman Crown 4 1/2" Downturned Brim Made of: Body - 100% Handwoven Straw Lining - 100% Polyester UPF 50+ Sun Protection - Bandana Patchwork Print Fabric Underbrim Designed in California, USA Sewn Hemlock Patch - Front Bandana Patchwork Print Fabric Binding On Brim Braided Rope Chin Cord with Wooden Adjustor Elastic Sweatband - Stretches to Fit Unlined Crown Size(s): One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 1/4 (L) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
Close
|
Raglan Bones NASA Trucker Baseball Cap |
---|
The American Needle Raglan Bones NASA Trucker Baseball Cap is a perfect cap for showing some love for space exploration! The low profile 6 panel crown (front two made of cotton and back four of mesh) make this cap out of this world, pun intended. The strapback adjusts easily for even more comfort. Approx. 4 1/2" 6-Panel Crown 2 3/4" Pre-Curved Stitched Bill Made of: 100% Cotton - Front 2 Panels and Bill 2 Front Panels - Fabric 4 Back Panels - Mesh NASA Patch - Front Sewn Eyelets for Ventilation Cotton Sweatband Packable / Crushable Unlined Size(s): Adjustable - Adjusts via strap in back to fit 7 5/8 (XL) comfortably. |
Close
|
Heritage Collection 1880s Topper |
---|
Made in the USA The top hat caused a riot the first time it was seen on the streets of London. The perpetrating "haberdasher" was John Hetherington, the hat's designer, who first adorned the style publicly in 1797. According to a contemporary newspaper account, passersby panicked at the sight and ran in terror. Hetherington was hauled into court for wearing "a tall structure having a shining luster calculated to frighten timid people." He was fined £500. By the 1880's, the top hat was worn by men of every station in life for daily and formal wear without fear of fines. Our Founder, George Bollman, wore this style as he worked to grow his factory and advance the craft of hat making. Bollman shaped these hats on five-piece wooden blocks which were cured in ovens. Our most pronounced "hour glass" shapes are still hand blocked and cured in this method today. Approx. 6 1/8 "Hour Glass" Crown 2 3/4" Hand-Shaped Brim Made of: 100% Wool Felt Hand Finished Printed Leather Sweatband Custom 140th Lining Sizes: S, M, L, and XL; fits true to size. |
USA: 1-888-VHS-HATS (1-888-847-4287)
INT'L: +1 619-906-4440 Se habla español
Shop for Hats at VillageHatShop.com | Privacy Policy | Website Accessibility | Site Map
Copyright © 1999-2020 Village Hat Shop: The #1 Source for Hats Online
*ALL SPECIAL OFFERS AND DISCOUNTS
Excludes wholesale/B2B, Certain Brand Restrictions, Special Orders or Where Otherwise Noted.
CONTACT USWe are happy to help! |
1 (888) 847-4287Mon-Sun 8am-4:00pm |