Close
|
3-Pleat Cotton Puggaree Hat Band |
---|
A new hat band can do wonders to freshen up any old hat, may we suggest the 3-Pleat Cotton Puggaree Hat Band by Capas Headwear. Featuring a multitude of great colors, this pug hat band is made of 100% cotton. Need to dress your hat up in something new? Look no further than the 3-Pleat Cotton Puggaree Hat Band - a fresh new look to your favorite hat! For best results, please follow all instructions for use (below). *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. Approx. 28" Total Length, End to End 1 7/8" Width Made of: 100% Cotton 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! |
Close
|
Italian Straw Skimmer Hat |
---|
Made in Italy Although superseded by the Panama hat in this century, the Skimmer was for many decades the man's straw hat of choice. The Italian Skimmer by Capas is Made in Italy from 4-ply Koberg straw. This is an authentic, high quality Skimmer hat often assiciated with barber shop quartets, jazz bands, and the like. (Also known as a Boater or Sailor). Approx. 3 1/2" Flat Top Crown 2 1/4" Flat Brim Made of: 100% 4-Ply Koberg Straw Striped Hat Band with Side Bow Firm/Stiff Body Leather Sweatband Lined Sizes: Fitted - Sizes 6 7/8 (S) to 7 3/4 (XXL); fits true to size. |
Close
|
Cotton Hat Sizer |
---|
Please Note: This item sells as a SINGLE sizing strip in either Black or White. Made in the USA Find yourself in-between hat sizes? Need a better fit? Prefer the added comfort of a cotton sweatband? All this can be achieved with the Cap-Ban-Nu Cotton Hat Sizer ideal for sizing your hat down by half a size! For best results, please follow all instructions for use (below). Instructions: * Remove tape backing from product. * Stick to the front section of the hat's sweatband or whatever area the hat has a loose fit (front, back or sides). You can also place the sizer behind the sweatband, directly onto the hat, or onto the backside of the sweatband. * Discard the used strip when soiled and replace. Approx. 10 3/4" Length 1" Width 2.5 MM Thick Made of: 100% Cotton Jersey Size: One single sizer per pack. One Size Fits Most. |
Close
|
Paisley 3-Pleat Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a classic paisley print in varying colors, the Paisley 3-Pleat Puggaree Hat Band by Capas Headwear will give a colorful new twist to your favorite hat. For best results, please follow all instructions for use (below). Approx. 29" Total Length, End to End 1 7/8" Width Made of: 100% Polyester 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Mariner Rush Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. UPF 50+ Sun Protection Locally based out of San Diego, CA, Hemlock Hat Co brings you their specialty line of functional, outdoor hats that celebrate self-expression. Trimmed and lined with a wide array of fun, original prints, their lifeguard styles allow you to express your personal style while enjoying everything the outdoors has to offer. The new Mariner Rush Straw Lifeguard Hat features their classic straw lifeguard hat body with underwater-themed binding on brim, underbrim and Hemlock sewn patch. An adjustable chin cord adds protection during windy conditions; a stretchy and absorbent sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 3/4" Cattleman Crown 4 1/2" Downturned Brim Made of: Body - 100% Handwoven Rush Straw Lining - 100% Polyester UPF 50+ Sun Protection - Underwater Print Fabric Underbrim Designed in California, USA Sewn Hemlock Patch - Front Underwater Print Fabric Binding On Brim Braided Rope Chin Cord with Wooden Adjustor Elastic Sweatband - Stretches to Fit Unlined Crown Size(s): One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 1/4 (L) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
Close
|
3-Pleat Satin Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a multitude of great colors, the 3-Pleat Satin Puggaree Hat Band will give a fresh new look to your favorite hat. For best results, please follow all instructions for use (below). Approx. 28" Total Length, End to End 2" Width Made of: 100% Satin 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
George Washington Tricorn Hat |
---|
The George Washington Tricorn Hat by Elope is fit for any aspiring presidents out there! Featuring a black felt body, black grosgrain ribbon trim with a bow and faux silver button adornment strategically on the underbrim. This hat has a firm structure, sure to withstand any political speech or debate headed your way. Approx. 4 1/2" Round Crown 5 1/8" Structured Brim Made of: 100% Polyester Stiff Structure Black Felt Body Grosgrain Ribbon Binding On Brim Bow and Faux Silver Button Adornment Felt Sweatband - Hook and Loop Adjustable Sizer Unlined Size(s): One Size Fits Most - Fits up to size 7 5/8 (XL). Adjust size using inner hook and loop adjustable sizer. |
Close
|
Leather Greek Fisherman's Cap |
---|
Made in Greece Capas Headwear is giving the fisherman's cap some street credit with a leather body in their latest fall headpiece, the Leather Greek Fisherman's Cap. Made of genuine leather, details include a double-layered cord hat band, decorative bill accent, leather sweatband and satin lining. A practical design this cap is dressed up for a night on the town. Approx. 1 7/8" Soft Crown 3/4" Structured Band 2 1/8" Bill/Visor Made of: 100% Leather Double-Layered Cord Hat Band Leather Side Buttons Decorative Bill Accent Leather Sweatband Satin Lining Sizes: S, M, L and XL; fits true to size. |
Close
|
Weathered Cotton Bucket Hat |
---|
Conner's Weathered Cotton Bucket Hat is a great piece to take on any trip. It has two side grommets on the left and right side to help with ventilation. It can easily be thrown in a bag and at the ready any time. Approx. 3" Square Crown 2 1/4" Downturned Brim Made of: 52% Cotton 48% Polyester Cotton Sweatband Conner Side Pin Side Grommets Crushable/Packable Unlined Size: S, M, L and XL; fits true to size. |
Close
|
Liberty Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. UPF 50+ Sun Protection Locally based out of San Diego, CA, Hemlock Hat Co brings you their specialty line of functional, outdoor hats that celebrate self-expression. Trimmed and lined with a wide array of fun, original prints, their lifeguard styles allow you to express your personal style while enjoying everything the outdoors has to offer. The new Liberty Straw Lifeguard Hat features their classic straw lifeguard hat body with a American flag-themed binding on brim, lining and Hemlock sewn patch. An adjustable chin cord adds protection during windy conditions; a stretchy and absorbent sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 3/4" Cattleman Crown 4 1/4" Downturned Brim Made of: Body - 100% Handwoven Straw Lining - 100% Polyester UPF 50+ Sun Protection - American Flag Print Fabric Underbrim Designed in California, USA Sewn Hemlock Patch - Front American Flag Print Fabric Binding On Brim Braided Rope Chin Cord with Wooden Adjustor Elastic Sweatband - Stretches to Fit Unlined Crown Size(s): One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 1/4 (L) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
Close
|
Seagrass Straw Ascot Cap |
---|
Please Note: This style runs large, see sizing details below or call us at 1-888-847-4287 for help with sizing. S = 7 M = 7 1/4 L = 7 1/2 XL = 7 3/4 Incredibly breathable and lightweight, the Seagrass Straw Ascot Cap by Capas Headwear is unique among straw caps. Featuring an open weave twisted seagrass straw body, this ascot provides shading from the sun while maximizing ventilation. Natural seagrass possesses wonderful color variation that gives the cap a uniquely organic and relaxed look. Approx. 10" Length 8" Width 2" Brim/Bill (Measured from size M) Made of: 100% Seagrass Straw Open Weave Twisted Seagrass Straw Body Cotton Sweatband Unlined Sizes: S, M, L and XL. Sizing runs large, see sizing disclaimer at top of description. |
Close
|
Merrik Cotton Newsboy Cap |
---|
Handmade Conner's Merrik Cotton Newsboy Cap is made from a lightweight and water resistant distressed cotton blend. Featuring a six-panel construction with sewn bill, the Merrik Cotton Newsboy Cap offers a low profile. Handmade to last - the Merrik Cotton Newsboy Cap by Conner looks even better with age! Approx. 9 1/2" Diameter (Flat) 1 7/8" Sewn Bill Made of: 52% Cotton 48% Polyester Handmade Six-Panel Construction Organic Cotton Sweatband with Elastic Terry at Front Unlined Crushable / Packable Sizes: S, M, L, XL, and XXL; fits true to size. |
Close
|
Leather Conch Band Wool Felt Gambler Hat |
---|
Conner's Leather Conch Band Wool Felt Gambler Hat is a fancy piece without the fancy price tag. The gambler keeps it shape without compromising the comfort of the hat. Be prepared, you will be receiving a lot of compliments when you wear this hat. Approx. 4" Telescope Crown 3" Underwelt Brim Made of: 100% Australian Wool Felt Cotton Sweatband Waterproof Leather Hat Band Silver Accent Pieces Unlined Sizes: S, M, L, and XL; fits true to size. |
Close
|
Derby Hat |
---|
This authentic hand-pressed Derby Hat (aka Bowler) is made of faux ultra-suede and features a distressed polyester band. Perfect for Victorian-inspired costumes or as the crowning finish to your steampunk costume. Approx. 5 1/2" Round Crown 2" Curled Brim Made of: 100% Polyester - Ultra Suede Finish Faux Ultra Suede Finish Distressed Self-Fabric Hat Band Adjustable Sweatband Unlined Lightweight Size: One Size Fits Most - Fits comfortably up to size 7 1/4 (L). Adjust size using inner hook and loop adjustable sizer. |
Close
|
Terry Cloth Hat Sizer |
---|
Please Note: This item sells as a SINGLE sizing strip in either Black or Tan. Made in the USA Find yourself in-between hat sizes? Need a better fit? Prefer the added comfort of a terry cloth sweatband? All this can be achieved with the Cap-Ban-Nu Terry Cloth Hat Sizer that can size your hat down half a size! For best results, please follow all instructions for use (below). Instructions: * Remove tape backing from product. * Stick to the front section of the hat's sweatband or whatever area the hat has a loose fit (front, back or sides). You can also place the sizer behind the sweatband, directly onto the hat, or onto the backside of the sweatband. * Discard the used strip when soiled and replace. Approx. 10 3/4" Length 1 1/8" Width 5 MM Thick Made of: 100% Cotton Terry Cloth Size: One single sizer per pack. One Size Fits Most. |
Close
|
Steamworks Coachman Topper |
---|
This authentic hand-pressed hat is made of ultra-suede and features a distressed suede band. Perfect for Victorian-inspired costumes or as the foundation for your next steampunk costume. Approx. 6 1/4" Crown 2 1/2" Brim Made of: 100% Polyester Suede Hat Band Elasticized Terry Cloth Sweatband Unlined Lightweight Size: One Size Fits Most - Fits up to size 7 1/2 (XL) comfortably. |
Close
|
Steampunk Wool Felt Bowler Hat |
---|
Conner's Steampunk Wool Felt Bowler Hat is a great addition to your collection. The dramatic rolled brim and double layered hat band is a real attention getter. There is a removable pocket on the interior of the hat, you can store cash or simply remove the pocket, the choice is up to you. Approx. 4" Round Crown 2" Rolled Brim Made of: 100% Australian Wool Felt Cotton Sweatband Removable Inside Pocket Side Buttons Two Layer Hat Band Lined Sizes: S, M, L, XL, and XXL; fits true to size. |
Close
|
Suede Pirate Hat |
---|
The Suede Pirate Hat by Elope you can embody famous pirates like Cheng I Sao or Grace O'Malley (if you don't know who these females are, we suggest a little Google sesh). This tricorn hat has a suede finish for luxury and to impress your fellow buccaneers. No swaping the deck, just a hearty 'Yo Ho!' with the Suede Pirate Hat by Elope. Approx. 4 3/4" Round Crown 5" Wired Shapeable Brim Made of: 100% Polyester Stiff Structure Suede Finish Grosgrain Ribbon Hat Band Stitched 'X' Accents Hook and Loop Adjustable Sizer - Adjusts to Fit Unlined Size(s): One Size Fits Most - fits up to size 7 1/8 (M). Adjust size using inner hook and loop adjustable sizer. |
Close
|
Blackout Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. Locally based out of San Diego, CA, Hemlock Hat Co brings you their specialty line of functional, outdoor hats that celebrate self-expression. Trimmed and lined with a wide array of fun, original prints, their lifeguard styles allow you to express your personal style while enjoying everything the outdoors has to offer. The new Blackout Straw Lifeguard Hat features their classic straw lifeguard hat body with a black-colored trim, lining and Hemlock sewn patch. An adjustable chincord adds protection during windy conditions; a stretchy and absorbent sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 3/4" Cattleman Crown 4 5/8" Downturned Brim Made of: Body - 100% Handwoven Seagrass and Rush Straw Lining - 100% Polyester Designed in California, USA Sewn Hemlock Patch - Front Blackout Print Fabric Trimmed Brim UPF 50+ Blackout Print Fabric Underbrim Braided Rope Chin Cord with Wooden Adjustor Elastic Sweatband - Stretches to Fit Unlined Crown Size(s): One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 1/4 (L) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
Close
|
Tarpon Springs Floating Supplex Sailing Hat |
---|
Handmade The Tarpon Springs Floating Supplex Sailing Hat by Conner is an incredibly lightweight and completely crushable boating hat that also floats! Made of approximately 5 recycled plastic bottles, the Tarpon Springs Hat is eco-friendly in addition to all its great features. Fully functional and convenient, this hat boasts a ventilated mesh crown, an anti-glare under brim, adjustable chin cord with toggle as well as an organic cotton sweatband and secret inner-pouch complete with care instructions. Waterproof, shrink and fade-proof, the Tarpon Springs Floating Supplex Sailing Hat by Conner also comes with a handy clip system to keep your hat secure when not in use. Look no further for the perfect sailing, fishing or boating hat - the Tarpon Springs Floating Supplex Sailing Hat by Conner has all your needs covered! Approx. 3 1/2" Flat Top Crown 2 3/4" to 3 1/2" Downturned Brim Made of: 100% Supplex Nylon - From 100% Recycled Plastic Bottles Handmade Eco-Friendly - Made from Recycled Plastic Bottles! Ventilated Crown Adjustable Chincord Anti-glare Under Brim Organic Cotton Sweatband Organic Cotton Inner Pouch (with Care Instructions) Clip System to Secure Hat When Not in Use Waterproof Floats Shrink and Fade-Proof Crushable/Packable Sizes: S, M, L, XL, and XXL; fits true to size |
Close
|
Kids' Wool Felt C-Crown Trilby Fedora Hat |
---|
Whether you need it for a Halloween costume or a school play, or maybe your little one wants to start a trend. The wool felt C-Crown Stingy Brim Fedora is a scaled down version of a classic shape. Approx. 3 1/2" C-Crown (Teardrop) 1 1/4" Overwelt Stingy Brim Made of: 100% Wool Felt 1" Wide Grosgrain Ribbon Hat Band Vinyl sweatband Unlined Sizes: Child's S, M, L, and XL. Suggested for: Kids 2-10 Years Old (see chart below): Age Inches CMS Hat Size Size 1 - 2 years 18 7/8 48 6 Small 2 - 4 years 19 5/8 50 6 1/4 Medium 5 - 7 years 20 3/8 52 6 1/2 Large 8 - 10 years 21 1/8 54 6 3/4 X-Large |
Close
|
Octopus Pirate Hat |
---|
The Octopus Pirate Hat by Elope features smooth faux leather on its outer panels with the left panel featuring an embossed octopus detail. Completing its stylish look, this pirate hat features matte faux suede on its inner panels and crown along with classic grosgrain ribbon trim along the edges. Nothing stirs more fear in a sailor's heart than the Kraken; wear the mighty cephalopod on your head with the Octopus Pirate Hat by Elope! Approx. 14 1/2" Length, Front to Back 15" Width 5" - 5 1/2" Panel Height Made of: 100% Polyester Classic Tricorn Shape Shapeable Wire Edges Smooth Faux Leather Finish Octopus Imprint - Left Side Matte Faux Suede Finish (Top) Grosgrain Ribbon Trim Hook and Loop Adjustable Sizer - Adjusts to Fit For Ages 14+ Size: One Size Fits Most - Fits teens (age 14+) and adults up to size 7 3/8 (L). Adjust size using inner hook and loop adjustable sizer. |
Close
|
Aviator Hat |
---|
This is the classic aviator cap worn by World War I American pilots, designed with a distressed ultra suede fabric with earflaps and buckle chinstrap. Approx. 7 1/4" Earflaps Made of: 100% Polyester Fabric Lining Secret Pocket Adjustable Sizing with Buckle Distressed Ultra-Suede Size: One Size Fits Most - Fits up to size 7 1/4 (L)comfortably. |
Close
|
Classic Assorted Side Feather 6-Pack |
---|
Please Note: Feathers and colors are ASSORTED and will vary. Packs CANNOT be customized and are sold as is. Improve the quality of look in your favorite hat with our handsome assortment of side feathers. Pick a feather to match your outfit of the day or add one for a pop of color. The pack comes with an assortment of 6 classic side feathers in a variety of shapes and color combinations. Just slide the feather behind your hat band and hit the town! Also available in additional assortments Fashion and Dapper. Approx. 3" - 3 1/2" Tall Size: One 6-pack of assorted side feathers per order. |
Close
|
Uncle Sam Mad Hatter Top Hat - Adult |
---|
Designed by Uncle Sam - well, not really, but if he did design a hat for the 4th of July, this would be it. Complete with a secret pocket inside the crown to stash away your ID, pocket change, or a copy of the Constitution. The Uncle Sam Mad Hatter Top Hat is a plush velvet top hat crafted in a patriotic pattern of red, white, and blue. Approx. 9" Crown 2 1/2" Brim Made of: 100% Polyester - Velvet Finish Flared Red & White Striped Crown Navy Self Hat Band with White Stars Shapeable Wire Brim Fabric Lining Secret Pocket - Store Your ID, Cash, Etc. Hook and Loop Adjustable Sizer - Adjusts to Fit Size: One Size Fits Most - Fits up to size 7 1/2 (XL). Adjust size using inner hook and loop adjustable sizer. |
Close
|
Scallywag Tricorn Hat |
---|
Ye shiver me timbers! Y'arrr! Get ready for International Talk Like a Pirate Day (September 19th) with Elope's Scallywag Tricorn Hat. This structured tricorn has a textured polyester fabric with a pattern that mimics the patina leather retains from years of wear. Approx. 6" High 16 1/2 Diameter Made of: 100% Polyester - Distressed Leather Finish Distressed/Aged Faux Leather Decorative Cross Stitching at Each Side Sweatband Unlined Size: One Size Fits Most - Fits up to size 7 3/8 (L) comfortably. |
Close
|
Mesh Crown Hemp Fabric Safari Fedora Hat |
---|
Conner's Mesh Crown Hemp Fabric Safari Fedora Hat has a great mesh crown for those that prefer a bit more ventilation for their head. The hemp material keeps this piece lightweight, but it won't go flying off your head when using the chin strap. Approx. 4" Flat Top Crown 2 1/2" Downturned Brim Made of: 100% Hemp Packable Chinstrap Conner Side Pin Cotton Sweatband Size: S, M, L, and XL; fits true to size. |
Close
|
Admiral Bicorn Military Hat |
---|
This iconic bicorn is modeled after the hats worn by military and naval officials in the late 18th century. Made of pressed EVA, covered in black ultra suede, this hat comes complete with ornate gold detailing, a gold button and red satin ribbon medallion. Complete your era-appropriate French Soldier or Napoleon Bonaparte costume! Approx. 6" High 18" Length Made of: 100% Polyester Ultra Suede Hook and Loop Adjustable Sizer - Adjusts to Fit Unlined Size: One Size Fits Most - Fits up to size 7 5/8 (XL). Adjust size using inner hook and loop adjustable sizer. |
USA: 1-888-VHS-HATS (1-888-847-4287)
INT'L: +1 619-906-4440 Se habla español
Shop for Hats at VillageHatShop.com | Privacy Policy | Website Accessibility | Site Map
Copyright © 1999-2020 Village Hat Shop: The #1 Source for Hats Online
*ALL SPECIAL OFFERS AND DISCOUNTS
Excludes wholesale/B2B, Certain Brand Restrictions, Special Orders or Where Otherwise Noted.
CONTACT USWe are happy to help! |
1 (888) 847-4287Mon-Sun 8am-4:00pm |