Close
|
Cotton Hat Sizer |
---|
Please Note: This item sells as a SINGLE sizing strip in either Black or White. Made in the USA Find yourself in-between hat sizes? Need a better fit? Prefer the added comfort of a cotton sweatband? All this can be achieved with the Cap-Ban-Nu Cotton Hat Sizer ideal for sizing your hat down by half a size! For best results, please follow all instructions for use (below). Instructions: * Remove tape backing from product. * Stick to the front section of the hat's sweatband or whatever area the hat has a loose fit (front, back or sides). You can also place the sizer behind the sweatband, directly onto the hat, or onto the backside of the sweatband. * Discard the used strip when soiled and replace. Approx. 10 3/4" Length 1" Width 2.5 MM Thick Made of: 100% Cotton Jersey Size: One single sizer per pack. One Size Fits Most. |
Close
|
Terry Cloth Hat Sizer |
---|
Please Note: This item sells as a SINGLE sizing strip in either Black or Tan. Made in the USA Find yourself in-between hat sizes? Need a better fit? Prefer the added comfort of a terry cloth sweatband? All this can be achieved with the Cap-Ban-Nu Terry Cloth Hat Sizer that can size your hat down half a size! For best results, please follow all instructions for use (below). Instructions: * Remove tape backing from product. * Stick to the front section of the hat's sweatband or whatever area the hat has a loose fit (front, back or sides). You can also place the sizer behind the sweatband, directly onto the hat, or onto the backside of the sweatband. * Discard the used strip when soiled and replace. Approx. 10 3/4" Length 1 1/8" Width 5 MM Thick Made of: 100% Cotton Terry Cloth Size: One single sizer per pack. One Size Fits Most. |
Close
|
Golf Ball Hat-Tac |
---|
FINAL SALE Made in the USA Never again worry about your hats becoming misshapen, sagging, or losing their curve, thanks to the Golf Ball Hat-Tac. This revolutionary invention sticks to any surface thanks to the 3M foam adhesive backing, and the fixed curve platform allows hats to comfortably rest in an upright position. With this patented and trademarked design, your ball cap, fedora, or any other piece of headwear will never lose its curve. This is the perfect place to hang your hat! Approx. 45.5 mm High 97 mm Wide 50 mm Deep Made in the USA 3M Foam Adhesive Backing Fixed Curve Platform Golf Ball and Putting Green Print Sturdy and Reliable Works for Hats of All Sizes Manufacturer Instructions for How to Apply: * Prep surface: Take a soft wash cloth with Isopropyl or similar alcohol cleaner to create a nice clean surface for the HAT-TAC™ to stick onto. Our recommendation is to find a smooth clean surface with little texture. * After prepping the surface: Grab the tab sticking out and peel away the red backing with ease. HAT-TAC™ attaches to the wall using a foam medium hold double sided adhesive. * Position: Align your HAT-TAC™ a few centimeters off the wall, making sure to the top so is perfectly level. * Last step: Push softly, just enough to hold the HAT-TAC™ in place on the surface. Take a few steps back to make sure it is exactly where you want it positioned. If the positioning is perfect, push and hold the back side of the HAT-TAC™ to the wall firmly for 30 seconds then wait 30 minutes before hanging a hat. Manufacturer Instructions for How to Remove: * Step One: Firmly grab each side of the HAT-TAC™ with both hands. * Step Two: Slowly wiggle the HAT-TAC™ up and down to separate the adhesive back from the wall. Be careful during this step as removing too fast or incorrectly could peel paint. FINAL SALE |
Close
|
PFG Statetriot Mesh FlexFit Fitted Baseball Cap |
---|
The PFG Statetriot Mesh FlexFit Fitted Baseball Cap by Columbia Sportswear is part of their Performance Fishing Gear collection and boasts a pre-curved bill and four breathable and stretchy back panels for hours of comfortable wear. Featuring a quirky, fish-inspired patch of the USA, this ball cap boldly declares your love of country ... and fishing, of course! Approx. 5 1/4" 5-Panel Crown 2 3/4" Pre-Curved Bill Made of: Fabric Panels & Bill - 100% Cotton Mesh Back Panels - 95% Polyester, 5% Polyurethane PFG Collection - Performance Fishing Gear 5-Panel Design Fishing-Inspired USA Front Patch Front Buckram-Supported Fabric Panel 4 Mesh Back Panels FlexFit Fitted Elasticized Sweatband Inseam Taping Unlined Sizes: S/M fits sizes 6 5/8 (XS) - 7 (M); L/XL fits sizes 7 1/8 (M) - 7 5/8 (XL); XXL fits sizes 7 3/8 (L) - 8 (XXXL). |
Close
|
Bora Bora Printed Booney Hat |
---|
UPF 50+ Sun Protection Featuring a UPF 50+ sun protection rating to block out 98% of harmful UVA and UVB rays and carrying the Skin Cancer Foundation's seal of recommendation, the Bora Bora Printed Booney Hat is definitely more than your average outdoor adventure hat. An Omni-Wick™ sweatband combines with a mesh vent panel (which is non UPF) to keep you cool and the sweat from dripping in your eyes. Quick-dry properties mean that even if this hat takes a dunk with you, it'll be dry in no time. A chin cord adds further security and the adjustable toggle allows you to customizes the hat's fit to your head.. Approx. 3" Square Crown 3" Downturned Brim Made of: 100% Nylon Omni-Shade UPF 50+ Sun Protection Omni-Wick™ Mesh Vent Panels (Crown) Chin Cord with Adjustable Toggle Omni-Wick™ Sweatband Unlined Size(s): S/M and L/XL - Fits true to size. |
USA: 1-888-VHS-HATS (1-888-847-4287)
INT'L: +1 619-906-4440 Se habla español
Shop for Hats at VillageHatShop.com | Privacy Policy | Website Accessibility | Site Map
Copyright © 1999-2020 Village Hat Shop: The #1 Source for Hats Online
*ALL SPECIAL OFFERS AND DISCOUNTS
Excludes wholesale/B2B, Certain Brand Restrictions, Special Orders or Where Otherwise Noted.
CONTACT USWe are happy to help! |
1 (888) 847-4287Mon-Sun 8am-4:00pm |