Close
|
Tucker Wool Felt Western Hat - Made to Order |
---|
Made in the USA A winner for the winter is the Tucker Wool Felt Western Hat from the Resistol Wool Collection. This gorgeous piece is made to order and makes anyone look good. Approx. 4 5/8" Cattleman Crown 4" Brim Made of: 100% Wool Felt Made in the USA 3X Wool Felt Self Hat Band with Buckle Trim Regular Oval Leather Sweatband Satin Lined Size: 6 3/4 (XS) - 7 3/4 (XXL); fits true to size. |
Close
|
George Strait Collection City Limits 6X Fur Felt Western Hat - Black - Made to Order |
---|
Made in the USA Introducing the City Limits 6X Fur Felt Western Hat as part of the George Strait collection. This western hat features gorgeous jet black fur felt trimmed with a rich black hat band and beautifully designed silver buckle. Approx. 4" Cattleman Crown 4" Brim Made of: 100% 6X Fur Felt Made in the USA Self Hat Band with Buckle Trim 6X Grade Regular Oval Leather Sweatband Satin Lining Sizes: 6 7/8 through 8; fits true to size. |
Close
|
Cisco Wool Felt Western Hat - Made to Order |
---|
Made in the USA Want a part of the Resistol Wool Collection but don't want a cattleman crown? Take a look at the Cisco Wool Felt Western Hat with a Gus crown to grab anyone's attention. Approx. 4" Gus Crown - Front 5" Gus Crown - Back 4 3/8" Brim Made of: 100% Wool Felt Leather and Bead Hat Band Regular Oval 3X Wool Felt Leather Sweatband Satin Lined Sizes: 6 3/4 (XS) - 7 3/4 (XXL); fits true to size. |
Close
|
Briscoe Wool Felt Western Hat |
---|
Made in the USA The Briscoe Wool Felt Western Hat by Resistol is a western hat with a stiff build that creates an absolutely beautiful silhouette. A leather hat band with silver accents adorns the crown while the interior boasts a leather sweatband and satin interior. This Resistol hat has been made in Texas, U.S.A. Approx. 3 3/4" Tear Drop Crown 3 1/2" Flared Brim Made of: 100% Wool Felt Made in the USA 3X Wool Felt Stiff Build Leather Hat Band Silver Accents Raw Edge Brim Leather Sweatband Satin Lining Size(s): 6 7/8 through 7 3/4; fits true to size. |
Close
|
10X Shantung Straw Long Oval Gambler Hat |
---|
Made in the USA Proudly made in Texas, USA, Resistol's 10X Shantung Straw Long Oval Gambler Hat features a 100% shantung straw with a firm and structured finish. A long oval telescope crown and flared brim gives this gambler just the right blend of sophistication and ease. The gorgeous 10X Shantung Straw Long Oval Gambler Hat comes with a genuine leather hat band wih a buckle feature and a leather sweatband to keep you cool and comfortable. Approx. 4" Long Oval Telescope Crown 3 1/2" Flared Brim Made of: 100% Shantung Straw Made in Texas, USA Firm Finish 10X Shantung Straw Buckled Genuine Leather Hat Band Resistol Side Pin Genuine Leather Sweatband Unlined Size(s): 6 7/8 (S) - 7 3/4 (XXL) - Fits true to size. |
Close
|
Kodiak 8X Fur Felt Peluche Open Crown Western Hat |
---|
Made in the USA Resistol's Kodiak 8X Fur Felt Peluche Open Crown Western Hat is one stunning hat showing this company's dedication to quality craftmanship. With a peluche texture of fur felt, which translates to plush, the Kodiak's texture makes it picture perfect. Also features a ribbon hat band, metal hat pin, leather sweatband and satin lining. Stun in the Kodiak Fur Felt Peluche Open Crown Western Hat by Resistol. Approx. 6" Open Crown 4 1/4" Brim Made of: 100% Fur Felt Made in the USA 8X Grade Plush Fur Felt Stiff Build Ribbon Hat Band Metal Hat Pin Raw Edge Brim Leather Sweatband Satin Lining Sizes: 6 7/8 through 7 3/4; fits true to size. |
Close
|
George Strait Collection City Limits 6X Fur Felt Western Hat - Chocolate Brown - Made to Order |
---|
Made in the USA Introducing the City Limits 6X Fur Felt Western Hat as part of the George Strait collection. This western hat features gorgeous chocolate brown fur felt trimmed with a rich brown hat band and beautifully designed silver buckle. Approx. 4" Cattleman Crown 4" Brim Made of: 100% 6X Fur Felt Self Hat Band with Buckle Trim 6X Grade Regular Oval Leather Sweatband Satin Lined Sizes: 6 3/4 (XS) - 7 3/4 (XXL); fits true to size. |
Close
|
Flat Cap Parking Hat-Tac |
---|
Made in the USA Never again worry about your hats becoming misshapen, sagging, or losing their curve, thanks to the Flat Cap Parking Hat-Tac. This revolutionary invention sticks to any surface thanks to the 3M foam adhesive backing, and the fixed curve platform allows hats to comfortably rest in an upright position. With this patented and trademarked design, your flat cap, ball cap, fedora, or any other piece of headwear will never lose its curve. This is the perfect place to hang your hat! Approx. 45.5 mm High 97 mm Wide 50 mm Deep Made in the USA 3M Foam Adhesive Backing Fixed Curve Platform Flat Cap Parking Lettering Village Hat Shop Logo Sturdy and Reliable Works for Hats of All Sizes Manufacturer Instructions for How to Apply: * Prep surface: Take a soft wash cloth with Isopropyl or similar alcohol cleaner to create a nice clean surface for the HAT-TAC™ to stick onto. Our recommendation is to find a smooth clean surface with little texture. * After prepping the surface: Grab the tab sticking out and peel away the red backing with ease. HAT-TAC™ attaches to the wall using a foam medium hold double sided adhesive. * Position: Align your HAT-TAC™ a few centimeters off the wall, making sure to the top so is perfectly level. * Last step: Push softly, just enough to hold the HAT-TAC™ in place on the surface. Take a few steps back to make sure it is exactly where you want it positioned. If the positioning is perfect, push and hold the back side of the HAT-TAC™ to the wall firmly for 30 seconds then wait 30 minutes before hanging a hat. Manufacturer Instructions for How to Remove: * Step One: Firmly grab each side of the HAT-TAC™ with both hands. * Step Two: Slowly wiggle the HAT-TAC™ up and down to separate the adhesive back from the wall. Be careful during this step as removing too fast or incorrectly could peel paint. |
Close
|
Ocho Rios 6X Fur Felt Cattleman Western Hat |
---|
Made in the USA Part of the George Strait Collection by Resistol, the Ocho Rios 6X Fur Felt Cattleman Western Hat is a premium hat for any George Strait fain. Made in the USA of 100% fur felt, you can feel the spirit of the 'King of Country' in every inch of this western hat. Features a cattleman crown and a dramatically flared brim. The build is stiff and the crown is decorated with a patterned hat band. A metal bar accent with George Strait's signature of approval also adorns the Ocho, can it get any more American country over here! Approx. 4" Cattleman Crown 4 1/4" Flared Brim Made of: 100% Fur Felt Made in the USA 6X Grade Fur Felt George Strait Collection Stiff Build Decorative Hat Band George Strait's Signature Metal Bar Raw Edge on Brim Genuine Leather Sweatband Satin Lining Size(s): 6 7/8 (S) through 7 3/4 (XXL); fits true to size. |
Close
|
Tuff Hedeman Collection Snake Eyes Wool Felt Western Hat - Made to Order |
---|
Made in the USA If you were looking for a way to stand out at the rodeo this is the way to go. As part of the Resistol Tuff Hedeman Collection we would like to introduce the Snake Eyes Wool Felt Western Hat with a little twist of style in its crown to make you stand out of the crowd. Approx. 4 1/4" Brick Crown 4 1/4" Shovel Front Brim Made of: 100% Wool Felt 3X Wool Felt 2-Ply Grosgrain Ribbon Hat Band with Side Tie Bound Edge Regular Oval Leather Sweatband Satin Lined Sizes: 6 3/4 (XS) - 7 3/4 (XXL); fits true to size. |
Close
|
Golf Ball Hat-Tac |
---|
Made in the USA Never again worry about your hats becoming misshapen, sagging, or losing their curve, thanks to the Golf Ball Hat-Tac. This revolutionary invention sticks to any surface thanks to the 3M foam adhesive backing, and the fixed curve platform allows hats to comfortably rest in an upright position. With this patented and trademarked design, your ball cap, fedora, or any other piece of headwear will never lose its curve. This is the perfect place to hang your hat! Approx. 45.5 mm High 97 mm Wide 50 mm Deep Made in the USA 3M Foam Adhesive Backing Fixed Curve Platform Golf Ball and Putting Green Print Sturdy and Reliable Works for Hats of All Sizes Manufacturer Instructions for How to Apply: * Prep surface: Take a soft wash cloth with Isopropyl or similar alcohol cleaner to create a nice clean surface for the HAT-TAC™ to stick onto. Our recommendation is to find a smooth clean surface with little texture. * After prepping the surface: Grab the tab sticking out and peel away the red backing with ease. HAT-TAC™ attaches to the wall using a foam medium hold double sided adhesive. * Position: Align your HAT-TAC™ a few centimeters off the wall, making sure to the top so is perfectly level. * Last step: Push softly, just enough to hold the HAT-TAC™ in place on the surface. Take a few steps back to make sure it is exactly where you want it positioned. If the positioning is perfect, push and hold the back side of the HAT-TAC™ to the wall firmly for 30 seconds then wait 30 minutes before hanging a hat. Manufacturer Instructions for How to Remove: * Step One: Firmly grab each side of the HAT-TAC™ with both hands. * Step Two: Slowly wiggle the HAT-TAC™ up and down to separate the adhesive back from the wall. Be careful during this step as removing too fast or incorrectly could peel paint. |
USA: 1-888-VHS-HATS (1-888-847-4287)
INT'L: +1 619-906-4440 Se habla español
Shop for Hats at VillageHatShop.com | Privacy Policy | Website Accessibility | Site Map
Copyright © 1999-2020 Village Hat Shop: The #1 Source for Hats Online
*ALL SPECIAL OFFERS AND DISCOUNTS valid for USA Ground service only.
Excludes wholesale/B2B, Certain Brand Restrictions, Special Orders or Where Otherwise Noted.
CONTACT USWe are happy to help! |
1 (888) 847-4287Mon-Sun 8am-4:00pm |