Close
|
Jewel Adjustable Baseball Cap |
---|
The Jewel Adjustable Baseball Cap from Something Special is a nice basic cap with a little bit o' bling. Featuring a classic 6-panel crown and pre-curved bill//visor, this adjustable hook and loop strap cap is studded with fun sequins throughout. With so many colors to choose from, the Jewel Baseball Cap by Something Special is sure to have one (or two) that compliments your taste. Approx. 2 3/4" Bill/Visor Made of: 100% Polyester Decorative Sequins Throughout Adjustable Hook and Loop Strap Cotton Poplin Sweatband Lightweight Size: Adjustable - Fits up to size 7 3/8 (L) comfortably. |
Close
|
Jewel Fabric Bucket Hat |
---|
The Jewel Fabric Bucket Hat from Something Special is a nice basic bucket with a little bit o' bling. Featuring a classic square crown and downturned brim, this bucket is studded with fun sequins. With so many colors to choose from, the Jewel Bucket Hat by Something Special is sure to bring light and sparkle to your day. Approx. 3 1/2" Square Crown 2 3/8" Downturned Brim Made of: 100% Polyester Flexible Body Lightweight Decorative Sequins Cotton Poplin Sweatband Stiff Mesh Lining Size(s): Adjustable - Fits up to size 7 1/8 (M) comfortably. |
Close
|
Rainbow Rhinestone Adjustable Baseball Cap |
---|
Featuring a standard black ball cap with just a touch of razzle dazzle, the Rainbow Rhinestone Adjustable Baseball Cap by Something Special is here to brighten your day. This prismatic beauty is made of all-natural cotton (excluding rhinestones, of course) with a classic six-panel crown, sewn eyelets for breathability, and a flexible finish for ultimate comfort. Add a subtle pop of color to your casualwear with the Rainbow Rhinestone Adjustable Baseball Cap by Something Special! Approx. 4 1/2" Six-Panel Crown 2 3/4" Pre-Curved Bill Made of: 100% Cotton Six-Panel Crown with Center Top Button Flexible Buckram-Supported Front (2) Panels Sewn Eyelets - (1) Per Panel Rainbow-Sequined Pre-Curved Bill (Replacement Sequins Provided) Hook & Loop-Adjustable Back Strap Cotton Sweatband & Inseam Tape Unlined Size(s): Adjustable - Fits up to size 7-1/2 (XL) comfortably using adjustable hook & loop strap at back. |
Close
|
T3 Cotton Duck Booney Hat - Khaki |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection Made in Canada The T3 is the most sought after Tilley Hat - made of classic cotton duck canvas in the traditional "Aussie" style with a versatile snap-up brim. The original design has 40 years of history, make sure to pay homage with your very own T3. Approx. 4" Crown 2 3/4" Front/Back Brim 2 3/8" Side Brim Made of: 100% Cotton Duck Features: * Made in Canada. * Guaranteed for life. * Certified sun protection - delivers an UPf of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Keep it on in windy conditions through the wind cord & size cinch system. * Secure your Hat during a steep incline with rear brim loop for clip - loop also holds wind cords when not in use. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Buoyancy - stays afloat in water. * Weighs 5.4 oz/153 grams. * DWR (Durable Water Repellent) Finish. * British brass grommets. * OEKO-TEX® Certification. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Sizes: 6 7/8 (S) - 7 7/8 (XXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
T3 Cotton Duck Booney Hat - Natural |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection Made in Canada The T3 is the most sought after Tilley Endurables hat, the originale with 40 years of history to back it up. Made of classic cotton duck canvas in the unique booney style with a versatile snap-up brim. Approx. 4" Flat Crown 2 3/4" Brim - Front & Back 2 3/8" Brim - Sides Made of: 100% Cotton Duck Features: * Made in Canada. * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Keep it on in windy conditions through the wind cord & size cinch system. * Secure your Hat during a steep incline with rear brim loop for clip - loop also holds wind cords when not in use. * Hydrofil® anti-sweat band to wick away moisture. * Weighs 5.4 oz/153 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) Finish. * Double Snap-Up Brim. * British Brass Grommets. * OEKO-TEX® certification. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Size(s): 6 7/8 (S) - 8+ (XXXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
LTM6 Airflo Hat - Khaki/Olive |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection The Tilley LTM6 AIRFLO® Hat is made from a lightweight 100% recycled nylon with a UPF50+ rating. The bluesign® approved fabric provides excellent UV protection while the mesh surrounding the top of the crown allows for incredible breathability. Approx. 4 3/8" Crown 3 1/4" Front/Back Brim 2 1/2" Side Brim Made of: Body - 100% Recycled Nylon Mesh - 100% Polyester Features: * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Underbrim reduces glare from most surfaces. * Keep it on in windy conditions through the wind cord & size cinch system. * Secure your Hat during a steep incline with rear brim loop for clip - loop also holds wind cords when not in use. * Ventilation through mesh insert around the top of the crown. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Lightweight, weighs 4 oz/113 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) Finish. * bluesign® Approved Fabric. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Sizes: 6 7/8 (S) - 8+ (XXXL);Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
TH5 Hemp Hat |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection Made in Canada The TH5 Hemp Hat from TIlley Endurables is natural and tough, built for endurance and longevity. Hemp fabric is very much like cotton, so it breathes extremely well. The nature of this fabric is that it does fade with continuous sun exposure, creating a more unique hat as time goes by. Approx. 3 3/4" Crown 2 5/8" Front Brim 2 3/4" Back Brim 2 1/8" Side Brims Made of: 100% Hemp Fabric Features: * Made in Canada. * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks. 98% of harmful UVA/UVB radiation. * Keep it on in windy conditions through the wind cord & size cinch system. * Secure your Hat during a steep incline with rear brim loop for clip - loop also holds wind cords when not in use. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Weighs 5 oz/150 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) Finish. * OEKO-TEX® certification. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Sizes: 7 (M) - 7 7/8 (XXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
Classic Shetland Wool Herringbone Newsboy Cap |
---|
Designed in Sweden; Made in Estonia Say hello to comfort with the Classic Shetland Wool Herringbone Newsboy Cap from Wigens Caps. Designed in Sweden, this cap showcases 8 gorgeous herringbone panels, a top button, and a grosgrain sweatband. Together, these features make for an incredibly comfortable cap! Approx. 8 1/2" Diameter 2" Pre-Curved Sewn Bill Made of: 100% Shetland Wool Designed in Sweden Made in Estonia Wigens Tag on Side 8-Panel Design Top Button Grosgrain Sweatband Satin Lining Sizes: 55cm (S) - 65cm (XXXL); fits true to size. |
Close
|
LTM6 Airflo - Olive Green |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection The Tilley LTM6 AIRFLO® Hat is made from a lightweight 100% recycled nylon with a UPF50+ rating. The bluesign® approved fabric provides excellent UV protection while the mesh surrounding the top of the crown allows for incredible breathability. Approx. 4 3/8" Crown 3 1/4" Front/Back Brim 2 1/2" Side Brim Made of: Body - 100% Nylon Mesh - 100% Polyester Features: * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Underbrim reduces glare from most surfaces. * Keep it on in windy conditions through the wind cord & size cinch system. * Secure your Hat during a steep incline with rear brim loop for clip - loop also holds wind cords when not in use. * Ventilation through mesh insert around the top of the crown. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Lightweight, weighs 4 oz/113 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) finish. * bluesign® Approved. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Sizes: 6 7/8 (S) - 8+ (XXXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file an insurance claim, please click here to be directed to the Tilley returns and exchange page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
TWS1 Paddler Hat - Stone |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection You're ready for any adventure with the TWS1 All Weather Hat from Tilley! This outdoor hat is perfect for any trek, in or out of water. The TWS1 All Weather Hat is ready keep you comfortable with the Schoeller 3x dry fabric C-Change membrane to control temperature when out in the sun, wind, and rain. The best part? It's also very comfortable! Approx. 3 1/4" Crown 2 3/4" Front/Back Brim 2 3/8" Side Brim Made of: 73% Polyester Schoeller® Technologies ecorepel® 27% Polyurethane Schoeller® Technologies ecorepel® Features: * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Underbrim reduces glare from most surfaces. * Wind stability through an extra stiff front brim & plastic wiring around the whole brim. * Keep it on in windy conditions through the wind cord & size cinch system. * Reflective yarns in the wind cords to increase visibility at dusk & dawn. * Secure your Hat while portaging with rear brim loop for clip - loop also holds wind cords when not in use. * Temperature is regulated with Schoeller® Fabric c_change® membrane. * Ventilation through a back vent & side grommets. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Lightweight, weighs 3.2 oz/91 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) finish. * Snap up sides for added wind stability & for added style. * Machine wash cool water, delicate cycle or hand wash; Reshape & air-dry. Size(s): 7 (M) - 7 7/8 (XXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
LTM5 Airflo Hat - Stone |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection The Tilley LTM5 AIRFLO® Hat is designed with a medium brim and polyester mesh in the crown for coolness and comfort during hot days and strenuous activities. The LTM5 AIRFLO® is similar to the LTM6 but has a slimmer profile but the same water repellent finish. Approx. 3 3/4" Crown 2 5/8" Front Brim 2 3/4" Back Brim 2 1/8" Side Brims Made of: Body - 100% Nylon Mesh - 100% Polyester Features: * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks. 98% of harmful UVA/UVB radiation. * Keep it on in windy conditions through the wind cord & size cinch system. * Secure your Hat during a steep incline with rear brim loop for clip - loop also holds wind cords when not in use. * Ventilation through mesh insert around the top of the crown. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Weighs 3 oz/85 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) Finish. * bluesign® Approved. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Sizes: 6 7/8 (S) - 8+ (XXXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
Classic Shetland Wool Herringbone Duckbill Ivy Cap |
---|
Designed in Sweden; Made in Estonia Take a trip back in time with the Classic Shetland Wool Herringbone Duckbill Ivy Cap from Wigens Caps. The grosgrain sweatband and smooth satin interior lining allow for a comfortable fit, and the herringbone pattern is simply stunning! This cap is sure to impress. Approx. 8" Diameter 1 3/4" Pre-Curved Sewn Bill Made of: 100% Shetland Wool Designed in Sweden Made in Estonia Wigens Tag on Side 6-Panel Design Grosgrain Sweatband Satin Lining Sizes: 55cm (S) - 65cm (XXXL); fits true to size. |
Close
|
Viking Helmet with Mask and Dragon |
---|
Handmade in Mexico What makes a Viking Helmet even more unique? A Dragon of course, one of the most feared and revered creatures in mythology. With the dreki or ormr on top of your head, is Ragnarok in the near future? We suggest wearing a beanie or bandana as a base layer under the helmet for comfort. Approx. 5 1/2" Crown 12" Horns (Length Can Vary) Made of: Helmet Body - 100% 22-Gauge Steel Ear Flaps & Chin Cord - 100% Leather Horns - 100% Cattle Horns Hand Welded 22 Gauge Steel Hand Sculpted Dragon and Mask Authentic Cattle Horns, Color and Shape Vary Leather Ear Flaps and Chin Cord Novelty Headwear, Not Historically Accurate Not Safety Certified as Protective Headgear Removable Foam Inserts for Size Adjustment Size(s): One Size Fits Most; fits up to size 7 1/2 (XL) comfortably. |
Close
|
Viking Helmet With Wings |
---|
Handmade in Mexico In Norse mythology, the valkyrie help guide the souls of deceased warriors to Valhalla. These detailed, bird-like wings will definitely help you reach the skies. We suggest wearing a beanie or bandana as a base layer under the helmet for comfort. Approx. 4 1/2" Crown 11" Wing Made of: 22 Gauge Steel 100% Leather Hand Welded 22 Gauge Steel Hand Sculpted Wings Leather Ear Flaps and Chin Cord Novelty Headwear, Not Historically Accurate Not Safety Certified as Protective Headgear Removable Foam Inserts for Size Adjustment Size(s): One Size Fits Most; fits up to size 7 1/2 (XL) comfortably. |
Close
|
Ultralight DWR Sunshield Neck Flap Baseball Cap |
---|
UPF 50+ Sun Protection The Ultralight DWR Sunshield Neck Flap Baseball Cap is a modern 5-panel design by Tilley Endurables. Has UPF 50+ sun protection, is water repellent, and if that wasn't enough, it also features a removable sun shield cape. Designed for function, this cap also has ventilation eyelets, a DWR finish and an adjustable strap at the back so you can find your best fit. Approx. 2 1/2" 5 Panel Crown 2 3/4" Curved Bill Made of: 94% Recycled Nylon 6% Elastane UPF 50+ Sun Protection Designed in Canada DWR Finish - Durable Water Repellent Quick Drying Eyelets for Ventilation Removable Sun Shield Cape Adjustable Strap - Back Anti-Sweat Sweatband Inseam Taping Mesh Lining Size(s): S/M and L/XL; fits true to size. |
Close
|
Melton Wool Pub Duckbill Cap - Dark Gray |
---|
Designed in Sweden; Made in Estonia With the Melton Wool Pub Duckbill Cap from Wigens Caps, you can stay ready for anything while looking sharp. Of Swedish design, this cap is sleek, featuring a simple, classic 6-panels, as well as a comfortable quilted lining on the interior. It's hard to go wrong with something so sharp! Approx. 8" Diameter 1 3/4" Pre-Curved Bill Made of: 100% Melton Wool Designed in Sweden Made in Estonia Melton Wool Classic 6-Panel Design Wigens Caps Side Tag Satin Sweatband Quilted Satin Lining Sizes: 55cm (S) - 65cm (XXXL); fits true to size. |
Close
|
TWS1 All Weather Hat - Gray |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection You're ready for any adventure with the TWS1 All Weather Hat from Tilley! Canadian-made, this outdoor hat is perfect for any trek, in or out of water. The TWS1 All Weather Hat is ready keep you comfortable with the Schoeller 3x dry fabric C-Change membrane to control temperature when out in the sun, wind, and rain. The best part? It's also very comfortable! Approx. 3 1/4" Crown 2 3/4" Front/Back Brim 2 3/8" Side Brim Made of: 73% Polyester Schoeller® Technologies ecorepel® 27% Polyurethane Schoeller® Technologies ecorepel® Features: * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Underbrim reduces glare from most surfaces. * Wind stability through an extra stiff front brim & plastic wiring around the whole brim. * Keep it on in windy conditions through the wind cord & size cinch system. * Reflective yarns in the wind cords to increase visibility at dusk & dawn. * Secure your Hat while portaging with rear brim loop for clip - loop also holds wind cords when not in use. * Temperature is regulated with Schoeller® Fabric c_change® membrane. * Ventilation through a back vent & side grommets. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Lightweight, weighs 3.2 oz/91 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) finish. * Snap up sides for added wind stability & for added style. * Machine wash cool water, delicate cycle or hand wash; Reshape & air-dry. Sizes: 7 (M) - 7 7/8 (XXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
LTM3 Airflo Hat - Black |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection The Tilley LTM3 AIRFLO® Hat offers the beloved shape of the T3 Hat with Tilley's incredibly durable UPF 50+ nylon fabric with mesh ventilation around its crown for added breathability. Just like the T3, the LTM3 boasts a snap-up brim and classic "Aussie" styling. Approx. 4" Crown 2 3/4" Front/Back Brim 2 3/8" Side Brim Made of: 100% Nylon Features: * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Underbrim reduces glare from most surfaces. * Keep it on in windy conditions through the wind cord & size cinch system. * Secure your Hat during a steep incline with rear brim loop for clip - loop also holds wind cords when not in use. * Ventilation through mesh insert around the top of the crown. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Weighs 4 oz/113 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) Finish. * bluesign® Approved. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Size(s): 7 (M) - 7 7/8 (XXL);Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
LTM8 Airflo Mesh Crown Hat |
---|
UPF 50+ Sun Protection The Tilley LTM8 Airflo Mesh Crown Hat is from a lightweight material with a UPF 50+ rating. The bluesign® approved fabric provides excellent UV protection while the mesh surrounding the top of the crown allows for incredible breathability. Approx. 3 3/4" Flat Teardrop Crown 3 1/8" Stitched Flat Brim Made of: Body - 100% Nylon Mesh - 100% Polyester Features: * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Keep it on in windy conditions through the wind cord & size cinch system. * Ventilation through mesh insert around the top of the crown. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Lightweight, weighs 4 oz/113 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) finish. * bluesign® Approved. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Sizes: 6 7/8 (S) - 8+ (XXXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file an insurance claim, please click here to be directed to the Tilley returns and exchange page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
Patchwork Herringbone Wool Ivy Cap |
---|
Designed in Sweden; Made in Estonia Inspired by Italy, Wigen Cap's Patchwork Herringbone Wool Ivy Cap is fashioned of genuine Bottoli Lanificio di Vittorio Veneto Italian fabric. This is 100% wool and features a classic ivy design. An attractive multicolored herringbone patchwork is adorned with an extended, sewn bill, grosgrain ribbon sweatband, and satin lining. Approx. 11" Front to Back, Flat 8 3/4" Side to Side, Flat 2 1/8" Pre-Curved Sewn Bill Made of: 100% Italian Wool Designed in Sweden Made in Estonia Fabric by Bottoli Lanificio di Vittorio Veneto, Italy, Established in 1861 Extended Bill Patchwork Pattern Wigens Logo Metal Bar Grosgrain Ribbon Sweatband Satin Lining Size(s): 54cm (S) - 65cm (XXXL); fits true to size. |
Close
|
Waterproof Rain Hat |
---|
Please Note: Sizes run small. See below or call us at 1-888-847-4287 for help with sizing. S = 6 3/4 M = 7 L = 7 1/4 XL = 7 1/2 UPF 50+ Sun Protection Tilley Endurables has taken the basic boonie to the next level with the Waterproof Rain Hat. The seam sealed construction makes this hat rain proof and wind proof, a double whammy when it comes to inclement weather. The snap-up sides help for a more streamlined silhouette and the adjustable reflective wind cord allows for a custom fit. Approx. 3 1/2" Crown 2 1/2" Front/Back Brim 2 1/4" Side Brim Made of: 73% Polyester 27% Polyurethane Features: * Designed in Canada. * UPF 50+ Sun Protection - Tested and Certified. * Rain and Wind Proof - Moisture Wicking and Durable Water Repellency. * DWR (Durable Water Repellent) finish. * Seam Sealed. * Keep it on in windy conditions through the wind cord & size cinch system. * Reflective yarns in the elasticized wind cords to increase visibility at dusk & dawn. * Adjustable Wind Cord with Metal Toggle - For Windy Conditions * Secure your Hat while portaging with rear brim loop for clip - loop also holds wind cords when not in use. * Temperature is regulated with Schoeller® Fabric c_change® membrane. * Hydrofil® anti-sweat band to wick away moisture. * Quick Drying. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Buoyancy - stays afloat in water. * Snap up sides for added wind stability & for added style. * Mesh Lining. * Machine wash cool water, delicate cycle or hand wash; Reshape & air-dry. * Tilley Side Tag. Size(s): S, M, L, and XL; ; runs small, please see disclaimer at the top of the product description. |
Close
|
LTM2 Airflo Hat - Stone |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection With the widest brim offered in the Tilley collection, the LTM2 AIRFLO® Hat is sure to provide ample coverage and comfort. The LTM2 AIRFLO® touts all the Tilley features you've come to expect: UPF 50+ sun protection rating, water repellent finish, moisture-wicking sweatband, is machine washable and much more! Made from recycled nylon! Approx. 3 1/2" Crown 3 7/8" Front/Back Brim (double wired for excellent stability) 3 3/4" Side Brim Made of: Body - 100% Nylon (Recycled) Features: * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Underbrim reduces glare from most surfaces. * Keep it on in windy conditions through the wind cord & size cinch system. * Secure your Hat during a steep incline with rear brim loop for clip - loop also holds wind cords when not in use. * Ventilation through mesh insert around the top of the crown. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Weighs 3.5 oz/99 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) Finish. * bluesign® Approved. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Size(s): 7(M) - 7 7/8 (XXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
T4MO Hikers Hat |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection You're ready for any adventure with the T4MO Hiker's Hat from Tilley! This outdoor hat is perfect for any trek along the trails, where your trusty hiking hat and boots lead you to a memorable adventure. The T4MO Hiker's Hat is ready to protect you from sun, wind, and rain. The best part? It's also very comfortable! The HyperKewl™ evaporative crown insert will help to provide temperatures that are approx. 10 to 15 degrees Fahrenheit cooler than ambient temperature; keeping you cool through those summer hikes. Approx. 4" Ventilated Crown 3 1/2" Front/Back Brim 2 1/2" Side Brim Made of: 98% Organic Cotton 2% Spandex HyperKewl™ Evaporative Insert: 100% polyester mesh on the outside; interior is 53% polymer fibres; 47% cellulose fibres. Features: * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Underbrim reduces glare from most surfaces. * Keep it on in windy conditions through the wind cord & size cinch system. * Secure your Hat during a steep incline with rear brim loop for clip - loop also holds wind cords when not in use. * Ventilation through mesh insert around the top of the crown. * Hydrofil® anti-sweat band to wick away moisture. * Lightweight, weighs 3.7 oz/108 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) Finish. * bluesign® Approved. * OEKO-TEX® Certification. * Pocket in crown holds the insert and is made with mesh to help increase airflow for maximum evaporation, when HyperKewl™ is not in use, the pocket in the crown can be used to carry ID, cash or credit card. * Temperature is regulated with HyperKewl™ Evaporative cooling insert: it absorbs & slowly releases water through evaporation to help ‘super charge’ the body’s natural cooling process. * How to use your HyperKewl™ Evaporative Insert: Soak the insert in cold water for up to 5 minutes – insert into the Hat. The airflow through the mesh panel will start the evaporative cooling process. The cooling insert is expected to provide temperatures that are approx. 10 to 15 degrees Fahrenheit cooler than ambient temperature depending on airflow. It will not feel like an air-conditionner on your head – it will super charge the natural evaporation process to help you feel comfortable on the trail. High humidity will diminish the fabric’s ability to evaporate water. * Remove HyperKewl™ insert before washing hat. Machine wash hat in cool water, delicate cycle or hand wash; Reshape & air-dry. Do not iron. Do not dry clean. Sizes: 7(M) - 7 7/8 (XXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
Viking Helmet with Horns |
---|
Handmade in Mexico It has been recently discovered that the real Viking Helmets did not have horns. But, our customers still like them, so we still make them. Wear this to a Nordic Festival, to the movies, Vikings games, or on Halloween. Flavor Flav has taken a liking to this helmet and is seen wearing it on his VH1 show, "Flavor of Love". Raab Himself, one of Bam Margera's crew, wears this helmet as a future Civil War Soldier in a re-enactment. Most recently seen in the mini series, "Hawkeye", during a larping scene. We suggest wearing a beanie or bandana as a base layer under the helmet for comfort. Approx. 4 1/2" Crown 11" Horns (Length Can Vary) Made of: 22 Gauge Steel 100% Leather 100% Cattle Horns Hand Welded 22 Gauge Steel Authentic Cattle Horns, Color and Shape May Vary Leather Ear Flaps and Chin Cord Novelty Headwear, Not Historically Accurate Not Safety Certified as Protective Headgear Removable Foam Inserts for Size Adjustment Size(s): One Size Fits Most; fits up to size 7 1/2 (XL) comfortably. |
Close
|
Sazerac Mesh Swinger Hat - Black/Multi |
---|
FINAL SALE Who says dressy can't be fun? The Kentucky Derby's Sazerac Mesh Swinger Hat is crafted of lightweight mesh and "straw" perfect for warm spring and summers months. A "straw" crown accented with a self hat band contrasts with its wide, asymmetric brim made of mesh with "straw" stripes throughout. Lush flowers made of black and multi-colored feathers complete the Sazerac's singular look. Inside, its drawstring sweatband may be easily adjusted for a comfortable and customized fit. Skip the plain old black hat this season - go with the Sazerac Mesh Swinger Hat by Scala for a fun pop of color that'll add the perfect finishing touch to your dressy look! Approx. 4 5/8" Round Crown 8 1/4" Asymmetric Brim - Front 8" Asymmetric Brim - Sides 6" Asymmetric Brim - Back Made of: 100% Polyester "Straw" Crown with Self Hat Band Mesh Brim with "Straw" Stripes Black & Multicolored Feather Flower Detail Drawstring Grosgrain Sweatband - Adjusts to Fit Unlined Lightweight Breathable Size: One Size Fits Most - Adjusts to fit sizes 6 3/4 (XS) - 7 1/8 (M) comfortably. Adjusts via inner drawstring sweatband. |
Close
|
Harris Tweed Wool Slim Ivy Cap |
---|
FINAL SALE Designed in Sweden; Made in Estonia Try a fun spin on a classic with the Harris Tweed Wool Slim Ivy Cap from Wigens Caps. This cap features a Harris Tweed wool body that is durable, long-lasting, and beautifully reliable, so this cap is with you for the long haul! The grosgrain ribbon sweatband is classy and comfortable, just like the satin interior lining. Approx. 7 1/2" Diameter 1 3/8" Sewn Bill Made of: 100% Genuine Harris Tweed Virgin Wool Handwoven in the Outer Hebrides, Scotland Designed in Sweden Made in Estonia Tweed Texture Wigens Side Tag Sewn Bill Grosgrain Ribbon Sweatband Satin Lining Sizes: 55cm (S) - 65cm (XXXL);fits true to size. FINAL SALE |
Close
|
LTM5 Airflo Hat - Olive Green |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection The Tilley LTM5 AIRFLO® Hat is designed with a medium brim and polyester mesh in the crown for coolness and comfort during hot days and strenuous activities. The LTM5 AIRFLO® is made with durable nylon fabric with a water repellent finish. Approx. 3 3/4" Crown 3 1/4" Front Brim 3" Back Brim 2 1/4" Side Brims Made of: Body - 100% Nylon Mesh - 100% Polyester Features: * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks. 98% of harmful UVA/UVB radiation. * Underbrim reduces glare from most surfaces. * Keep it on in windy conditions through the wind cord & size cinch system. * Secure your Hat during a steep incline with rear brim loop for clip - loop also holds wind cords when not in use. * Ventilation through mesh insert around the top of the crown. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Weighs 3 oz/85 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) Finish. * bluesign® Approved. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Sizes: 6 7/8 (S) - 8 (XXXL);Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
LTM3 Airflo Hat - Khaki/Olive |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection The Tilley LTM3 AIRFLO® Hat offers the beloved shape of the T3 Hat with Tilley's incredibly lightweight and durable UPF 50+ nylon fabric with mesh ventilation around its crown for added breathability. Just like the T3, the LTM3 boasts a snap-up brim and classic "Aussie" styling. Approx. 4" Crown 2 3/4" Front/Back Brim 2 3/8" Side Brim Made of: Body - 100% Nylon Mesh - 100% Polyester Features: * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Underbrim reduces glare from most surfaces. * Keep it on in windy conditions through the wind cord & size cinch system. * Secure your Hat during a steep incline with rear brim loop for clip - loop also holds wind cords when not in use. * Ventilation through mesh insert around the top of the crown. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Weighs 4 oz/113 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) Finish. * bluesign® Approved. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Sizes: 6 7/8 (S) - 7 7/8 (XXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
USA: 1-888-VHS-HATS (1-888-847-4287)
INT'L: +1 619-906-4440 Se habla español
Shop for Hats at VillageHatShop.com | Privacy Policy | Website Accessibility | Site Map
Copyright © 1999-2020 Village Hat Shop: The #1 Source for Hats Online
*ALL SPECIAL OFFERS AND DISCOUNTS
Excludes wholesale/B2B, Certain Brand Restrictions, Special Orders or Where Otherwise Noted.
CONTACT USWe are happy to help! |
1 (888) 847-4287Mon-Sun 8am-4:00pm |