Close
|
Jewel Adjustable Baseball Cap |
---|
The Jewel Adjustable Baseball Cap from Something Special is a nice basic cap with a little bit o' bling. Featuring a classic 6-panel crown and pre-curved bill//visor, this adjustable hook and loop strap cap is studded with fun sequins throughout. With so many colors to choose from, the Jewel Baseball Cap by Something Special is sure to have one (or two) that compliments your taste. Approx. 2 3/4" Bill/Visor Made of: 100% Polyester Decorative Sequins Throughout Adjustable Hook and Loop Strap Cotton Poplin Sweatband Lightweight Size: Adjustable - Fits up to size 7 3/8 (L) comfortably. |
Close
|
Jewel Fabric Bucket Hat |
---|
The Jewel Fabric Bucket Hat from Something Special is a nice basic bucket with a little bit o' bling. Featuring a classic square crown and downturned brim, this bucket is studded with fun sequins. With so many colors to choose from, the Jewel Bucket Hat by Something Special is sure to bring light and sparkle to your day. Approx. 3 1/2" Square Crown 2 3/8" Downturned Brim Made of: 100% Polyester Flexible Body Lightweight Decorative Sequins Cotton Poplin Sweatband Stiff Mesh Lining Size(s): Adjustable - Fits up to size 7 1/8 (M) comfortably. |
Close
|
3-Pleat Cotton Puggaree Hat Band |
---|
A new hat band can do wonders to freshen up any old hat, may we suggest the 3-Pleat Cotton Puggaree Hat Band by Capas Headwear. Featuring a multitude of great colors, this pug hat band is made of 100% cotton. Need to dress your hat up in something new? Look no further than the 3-Pleat Cotton Puggaree Hat Band - a fresh new look to your favorite hat! For best results, please follow all instructions for use (below). *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. Approx. 28" Total Length, End to End 1 7/8" Width Made of: 100% Cotton 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! |
Close
|
3-Pleat Satin Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a multitude of great colors, the 3-Pleat Satin Puggaree Hat Band will give a fresh new look to your favorite hat. For best results, please follow all instructions for use (below). Approx. 28" Total Length, End to End 2" Width Made of: 100% Satin 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Six Panel Canvas Skull Cap Beanie Hat |
---|
Please note: Sizes medium and large run true to size, however extra-large runs a full size small. Made in the USA Made of durable cotton canvas, the Six Panel Canvas Skull Cap Beanie Hat has the classic dome-hugging skull cap look and feel in a hard-wearing and natural material. Featuring their classic six-panel design, this skull cap beanie is finished with a 2-inch cuff and a cotton sweatband. Approx. 4 1/2" Crown 8" Diameter 2" Cuff Made of: 100% Cotton Canvas Made in the USA Six-Panel Design Cotton Sweatband Unlined Packable / Crushable Size(s): M, L and XL. Please see disclaimer in regards to sizing at top. |
Close
|
Paisley 3-Pleat Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a classic paisley print in varying colors, the Paisley 3-Pleat Puggaree Hat Band by Capas Headwear will give a colorful new twist to your favorite hat. For best results, please follow all instructions for use (below). Approx. 29" Total Length, End to End 1 7/8" Width Made of: 100% Polyester 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Six Panel Wool Skull Cap Beanie Hat |
---|
Made in the USA Proudly made in the USA, the Six Panel Wool Skull Cap Beanie Hat features a skull cap design with a soft, six-panel crown. Crafted in the USA of warm wool, this beanie cap hugs your head for a fitted and streamlined look. Approx. 4" High Crown 8" Diameter 2" Cuff Made of: 100% Wool Made in the USA 6-Panel Skull Cap Design Cuff Cotton Sweatband Cotton Inseam Taping Unlined Packable / Crushable Sizes: M, L and XL; fits true to size. |
Close
|
Six Panel Herringbone Wool Skull Cap Beanie Hat |
---|
Made in the USA Made of 100% wool right here in the USA, the Six Panel Herringbone Wool Skull Cap Beanie Hat by New York Hat Co. adds some texture to an old-school classic. Featuring a timeless herringbone pattern in two great colors, the Six Panel Herringbone Wool Skull Cap Beanie Hat by New York Hat Co. offers a stylish twist on the dome-hugging fit and sleek, brimless look you love! Approx. 4" Crown 8" Diameter 2" Cuff Made of: 100% Wool 6-Panel Construction Brimless Skull Cap Beanie Hat Cotton Sweatband Cotton Taped Inseams Unlined Size: M, L, and XL; fits true to size. |
Close
|
Six Panel Corduroy Skull Cap Beanie Hat |
---|
Made in the USA Made of stylish cotton corduroy, the Six Panel Corduroy Skull Cap Beanie Hat has the classic dome-hugging skull cap look and feel you can wear all year round. Featuring their classic six-panel design, this skull cap beanie is finished with a 2-inch cuff and a cotton sweatband. Approx. 4 1/2" Crown 8" Diameter 2" Cuff Made of: 100% Cotton Corduroy Made in the USA Six-Panel Design Cotton Sweatband Unlined Packable / Crushable Sizes: M, L and XL; fits true to size. |
Close
|
Starburst 3-Pleat Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a great new starburst print in varying colors, the Starburst 3-Pleat Puggaree Hat Band by Capas Headwear will give a colorful new twist to your favorite hat. Approx. 29" Total Length, End to End 1 7/8" Width Made of: 100% Polyester Instructions for Use: * Fasten the unfinished end of the pug band on the lower left side of the crown. * Wrap hatband around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hatband closest to the base of the crown. *Traditionally, men's hatbands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! |
Close
|
Spitfire Suede Leather Newsboy Cap |
---|
Made in the USA New York Hat Company brings back the Spitfire dressed in suede with the Spitfire Suede Leather Newsboy Cap. Made of genuine leather with a suede finish, this cap features a classic 8-panel design, a soft bill and elegant stitching that adds definition and detail. The unlined interior boasts a cushioned sweatband and inseam taping. All you need are some boots to complete a classic fall look! Approx. 9" Length, Flat 9 1/2" Width, Flat 2" Unstructured Bill Made of: 100% Leather (Suede) Made in the USA Packable 8-Panel Design Top Button Padded Cotton Sweatband Inseam Taping Unlined Size(s): S, M, L and XL; fits true to size. |
USA: 1-888-VHS-HATS (1-888-847-4287)
INT'L: +1 619-906-4440 Se habla español
Shop for Hats at VillageHatShop.com | Privacy Policy | Website Accessibility | Site Map
Copyright © 1999-2020 Village Hat Shop: The #1 Source for Hats Online
*ALL SPECIAL OFFERS AND DISCOUNTS
Excludes wholesale/B2B, Certain Brand Restrictions, Special Orders or Where Otherwise Noted.
CONTACT USWe are happy to help! |
1 (888) 847-4287Mon-Sun 8am-4:00pm |