Close
|
3-Pleat Cotton Puggaree Hat Band |
---|
A new hat band can do wonders to freshen up any old hat, may we suggest the 3-Pleat Cotton Puggaree Hat Band by Capas Headwear. Featuring a multitude of great colors, this pug hat band is made of 100% cotton. Need to dress your hat up in something new? Look no further than the 3-Pleat Cotton Puggaree Hat Band - a fresh new look to your favorite hat! For best results, please follow all instructions for use (below). *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. Approx. 28" Total Length, End to End 1 7/8" Width Made of: 100% Cotton 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! |
Close
|
3-Pleat Satin Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a multitude of great colors, the 3-Pleat Satin Puggaree Hat Band will give a fresh new look to your favorite hat. For best results, please follow all instructions for use (below). Approx. 28" Total Length, End to End 2" Width Made of: 100% Satin 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Paisley 3-Pleat Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a classic paisley print in varying colors, the Paisley 3-Pleat Puggaree Hat Band by Capas Headwear will give a colorful new twist to your favorite hat. For best results, please follow all instructions for use (below). Approx. 29" Total Length, End to End 1 7/8" Width Made of: 100% Polyester 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Hidden Falls Crushable Wool Felt Fedora Hat |
---|
Please Note: Sizes run small, see sizing breakdown below or call us at 1-888-847-4287 for help with sizing. S = 6 3/4 M = 7 L = 7 1/4 XL = 7 1/2 Made in the USA Timeless craftsmanship meets comfortable functionality with Hidden Falls Wool Felt Fedora Hat. Perfect for every adventure, this USA-made piece is not only crushable and easy to pack, but it’s also water repellent and features a DRI-LEX® Absorbent Sweatband. Designed with practicality in mind without sacrificing any of the style, this hat makes for the perfect travel companion. Made of: 100% Wool Felt Approx. 4 1/4" Teardrop Crown 3 3/4" Downturned Brim Made in the USA Water Repellent Crushable/Packable Tonal Grosgrain Ribbon Hat Band Underwelt Brim Removable Stetson Side Pin DRI-LEX® Absorbent Sweatband Unlined Size(s): S, M, L, and XL; runs small, please read disclaimer at top of description. |
Close
|
Gallatin Crushable Wool Felt Outback Hat |
---|
Made in the USA The Stetson Gallatin Crushable Wool Felt Outback Hat is a crushable wool felt hat suitable for everyday wear. American made, the superb soft felt is also water repellent. A pick-stitched leather hat band complements this reliable outback-inspired outdoor style. Approx. 4" Teardrop Crown 3 3/8" Curved Brim Made of: 100% Wool Felt Made in the USA Crushable/Packable Leather Hat Band Water Repellent Underwelt Brim Crushable DRI-LEX® Absorbent Sweatband Unlined Sizes: S, M, L, XL, and XXL; fits true to size. |
Close
|
Oceanus Wide Brim Wool Felt Fedora Hat |
---|
Made in the USA Stetson's Oceanus Wide Brim Wool Felt Fedora Hat is part of their Seeker collection. Made in the USA with a stiff body, the Oceanus' stand out features are the crown adornments. At the base, we have a grosgrain ribbon band. Two hand dyed silk cord bands have been twisted together and placed on top of the grosgrain ribbon, completing the multi-layered hat band. A sleek and delicate feather has been slipped into a grosgrain ribbon cross piece and finally, a star shaped metal hat pin sits on top. Step out in a hat that brings a little extra to the table. Approx. 4 1/4" Center Pinch Crown 4" Curled Brim Made of: 100% Wool Felt Made in the USA Firm/Stiff Body Multilayered Hat Band Grosgrain Ribbon Band Removable Side Feather Double Hand Dyed Silk Cord Band Metal Hat Pin Raw Edge Brim Faux Leather Sweatband Satin Lining Size(s): S, M, L and XL; fits true to size. |
Close
|
Hoagy Wool Blend Safari Fedora Hat |
---|
There's not much quite like the Hoagy Wool Blend Fedora Hat from the Dorfman Pacific Company. This durable hat features a wool blend body, with metal ventilation eyelets in the crown that make for a new level of comfort, like the smooth interior lining. Additionally, the layered leather hat band is so stylish and chic, you'll always look your best. Approx. 4" Center Pinch Crown 2 1/2" Downturned Brim Made of: 50% Wool 20% Nylon 30% Polyester Wool Blend Body Metal Ventilation Eyelets Layered Leather Hat Band Plaid Sweatband Smooth Lining Size(s): L and XL; fits true to size. |
Close
|
Golf Ball Hat-Tac |
---|
FINAL SALE Made in the USA Never again worry about your hats becoming misshapen, sagging, or losing their curve, thanks to the Golf Ball Hat-Tac. This revolutionary invention sticks to any surface thanks to the 3M foam adhesive backing, and the fixed curve platform allows hats to comfortably rest in an upright position. With this patented and trademarked design, your ball cap, fedora, or any other piece of headwear will never lose its curve. This is the perfect place to hang your hat! Approx. 45.5 mm High 97 mm Wide 50 mm Deep Made in the USA 3M Foam Adhesive Backing Fixed Curve Platform Golf Ball and Putting Green Print Sturdy and Reliable Works for Hats of All Sizes Manufacturer Instructions for How to Apply: * Prep surface: Take a soft wash cloth with Isopropyl or similar alcohol cleaner to create a nice clean surface for the HAT-TAC™ to stick onto. Our recommendation is to find a smooth clean surface with little texture. * After prepping the surface: Grab the tab sticking out and peel away the red backing with ease. HAT-TAC™ attaches to the wall using a foam medium hold double sided adhesive. * Position: Align your HAT-TAC™ a few centimeters off the wall, making sure to the top so is perfectly level. * Last step: Push softly, just enough to hold the HAT-TAC™ in place on the surface. Take a few steps back to make sure it is exactly where you want it positioned. If the positioning is perfect, push and hold the back side of the HAT-TAC™ to the wall firmly for 30 seconds then wait 30 minutes before hanging a hat. Manufacturer Instructions for How to Remove: * Step One: Firmly grab each side of the HAT-TAC™ with both hands. * Step Two: Slowly wiggle the HAT-TAC™ up and down to separate the adhesive back from the wall. Be careful during this step as removing too fast or incorrectly could peel paint. FINAL SALE |
USA: 1-888-VHS-HATS (1-888-847-4287)
INT'L: +1 619-906-4440 Se habla español
Shop for Hats at VillageHatShop.com | Privacy Policy | Website Accessibility | Site Map
Copyright © 1999-2020 Village Hat Shop: The #1 Source for Hats Online
*ALL SPECIAL OFFERS AND DISCOUNTS
Excludes wholesale/B2B, Certain Brand Restrictions, Special Orders or Where Otherwise Noted.
CONTACT USWe are happy to help! |
1 (888) 847-4287Mon-Sun 8am-4:00pm |