Close
|
3-Pleat Cotton Puggaree Hat Band |
---|
A new hat band can do wonders to freshen up any old hat, may we suggest the 3-Pleat Cotton Puggaree Hat Band by Capas Headwear. Featuring a multitude of great colors, this pug hat band is made of 100% cotton. Need to dress your hat up in something new? Look no further than the 3-Pleat Cotton Puggaree Hat Band - a fresh new look to your favorite hat! For best results, please follow all instructions for use (below). *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. Approx. 28" Total Length, End to End 1 7/8" Width Made of: 100% Cotton 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! |
Close
|
3-Pleat Satin Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a multitude of great colors, the 3-Pleat Satin Puggaree Hat Band will give a fresh new look to your favorite hat. For best results, please follow all instructions for use (below). Approx. 28" Total Length, End to End 2" Width Made of: 100% Satin 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Paisley 3-Pleat Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a classic paisley print in varying colors, the Paisley 3-Pleat Puggaree Hat Band by Capas Headwear will give a colorful new twist to your favorite hat. For best results, please follow all instructions for use (below). Approx. 29" Total Length, End to End 1 7/8" Width Made of: 100% Polyester 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Golf Ball Hat-Tac |
---|
FINAL SALE Made in the USA Never again worry about your hats becoming misshapen, sagging, or losing their curve, thanks to the Golf Ball Hat-Tac. This revolutionary invention sticks to any surface thanks to the 3M foam adhesive backing, and the fixed curve platform allows hats to comfortably rest in an upright position. With this patented and trademarked design, your ball cap, fedora, or any other piece of headwear will never lose its curve. This is the perfect place to hang your hat! Approx. 45.5 mm High 97 mm Wide 50 mm Deep Made in the USA 3M Foam Adhesive Backing Fixed Curve Platform Golf Ball and Putting Green Print Sturdy and Reliable Works for Hats of All Sizes Manufacturer Instructions for How to Apply: * Prep surface: Take a soft wash cloth with Isopropyl or similar alcohol cleaner to create a nice clean surface for the HAT-TAC™ to stick onto. Our recommendation is to find a smooth clean surface with little texture. * After prepping the surface: Grab the tab sticking out and peel away the red backing with ease. HAT-TAC™ attaches to the wall using a foam medium hold double sided adhesive. * Position: Align your HAT-TAC™ a few centimeters off the wall, making sure to the top so is perfectly level. * Last step: Push softly, just enough to hold the HAT-TAC™ in place on the surface. Take a few steps back to make sure it is exactly where you want it positioned. If the positioning is perfect, push and hold the back side of the HAT-TAC™ to the wall firmly for 30 seconds then wait 30 minutes before hanging a hat. Manufacturer Instructions for How to Remove: * Step One: Firmly grab each side of the HAT-TAC™ with both hands. * Step Two: Slowly wiggle the HAT-TAC™ up and down to separate the adhesive back from the wall. Be careful during this step as removing too fast or incorrectly could peel paint. FINAL SALE |
Close
|
Napa Sunblocker Panama Straw Sun Hat |
---|
FINAL SALE Please Note: This style has a shallow crown. Bodies Handwoven in Ecuador; Finished in the USA UPF 50+ Sun Protection Inspired by the Napa Valley Wine Country, this hat reflects the Northern California spirit that values protection from the strong rays of the sun. The Napa Sunblocker Panama Straw Sun Hat is a wide brim Panama with a light stiffener making for a rugged and durable sun protector. Great for both fashionable or even hiking and trekking wear. Approx. 3 7/8" Center Pinch Crown 3 1/2" Downturned Brim Made of: 100% Panama Straw (Toquilla Palm) Handwoven in Ecuador Blocked and Finished in the USA UPF 50+ Sun Protection Coordinating Color Hat Band Cotton Sweatband Unlined Size: M, L and XL only; fits true to size. FINAL SALE |
Close
|
Starburst 3-Pleat Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a great new starburst print in varying colors, the Starburst 3-Pleat Puggaree Hat Band by Capas Headwear will give a colorful new twist to your favorite hat. Approx. 29" Total Length, End to End 1 7/8" Width Made of: 100% Polyester Instructions for Use: * Fasten the unfinished end of the pug band on the lower left side of the crown. * Wrap hatband around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hatband closest to the base of the crown. *Traditionally, men's hatbands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! |
Close
|
Green Bay Packers NFL Clean Up Strapback Baseball Cap Dad Hat |
---|
Garment washed for a broken-in look and feel, this dark green low-crown relaxed baseball cap is constructed of quality cotton twill detailed with raised embroidery of the Green Bay Packers NFL logo. Approx. 4 1/2" Crown, 6-Panel 2 3/4" Pre-Curved Bill Made of: 100% Washed Cotton Twill Classic 6-Panel Crown Sewn Eyelets - For Ventilation Raised Team Logo Embroidery Embroidered '47 Brand Side Hit Sewn Team Logo Tab Self-Fabric Adjustable Strap w/ Snap Brass Buckle Size: Adjustable - Adjusts via fabric strapback to fit up to size 7 5/8 (XL) comfortably. |
Close
|
Green Bay Packers NFL Clean Up Legacy Strapback Baseball Cap |
---|
Rep your favorite team in style with the Green Bay Packers NFL Clean Up Legacy Strapback Baseball Cap from 47 Brand. The classic 6-panel design features the embroidered team legacy logo front and center, and the 100% cotton material and sewn ventilation allow for a most comfortable fit. With this hat on your head, you're the Packers' #1 fan! Approx. 4" Crown, 6-Panel 2 5/8" Pre-Curved Bill Made of: 100% Washed Cotton Twill Officially Licensed Classic 6-Panel Crown Sewn Eyelets - For Ventilation Raised Team Legacy Logo Embroidery Embroidered '47 Brand Side Hit Sewn Team Logo Tab Self-Fabric Adjustable Strap with Snap Brass Buckle Size: Adjustable - Adjusts via fabric strapback to fit up to size 7 5/8 (XL) comfortably. |
Close
|
Oakland Athletics MLB Clean Up Strapback Baseball Cap |
---|
Featuring a soft classic 6-panel crown embroidered with the Oakland Athletics' MLB logo at the front, the Oakland Athletics MLB Clean Up Strapback Baseball Cap II by 47 Brand is uber comfortable and relaxed. Made with a soft, garment washed cotton twill finish and pre-curved bill/brim, this baseball cap has the casual, "dad hat/cap" style popular with both men and women. An embroidered '47 Brand side hit, self-fabric adjustable strapback and team logo back tab complete the classic look of this easy-going baseball cap. Approx. 4" Crown 2 3/4" Pre-Curved Bill/Brim Made of: 100% Cotton - Washed Garment Twill Finish Officially Licensed Soft 6-Panel Crown Sewn Eyelets for Ventilation Team Logo Raised Embroidery Embroidered '47 Brand Side Hit Team Logo Tab at Back Adjustable Self-Fabric Strapback Cotton Sweatband Size: Adjustable - Fits sizes 6 7/8 (S) - 7 5/8 (XL) comfortable. Adjust using fabric strapback. |
USA: 1-888-VHS-HATS (1-888-847-4287)
INT'L: +1 619-906-4440 Se habla español
Shop for Hats at VillageHatShop.com | Privacy Policy | Website Accessibility | Site Map
Copyright © 1999-2020 Village Hat Shop: The #1 Source for Hats Online
*ALL SPECIAL OFFERS AND DISCOUNTS
Excludes wholesale/B2B, Certain Brand Restrictions, Special Orders or Where Otherwise Noted.
CONTACT USWe are happy to help! |
1 (888) 847-4287Mon-Sun 8am-4:00pm |