Close
|
Golf Ball Hat-Tac |
---|
FINAL SALE Made in the USA Never again worry about your hats becoming misshapen, sagging, or losing their curve, thanks to the Golf Ball Hat-Tac. This revolutionary invention sticks to any surface thanks to the 3M foam adhesive backing, and the fixed curve platform allows hats to comfortably rest in an upright position. With this patented and trademarked design, your ball cap, fedora, or any other piece of headwear will never lose its curve. This is the perfect place to hang your hat! Approx. 45.5 mm High 97 mm Wide 50 mm Deep Made in the USA 3M Foam Adhesive Backing Fixed Curve Platform Golf Ball and Putting Green Print Sturdy and Reliable Works for Hats of All Sizes Manufacturer Instructions for How to Apply: * Prep surface: Take a soft wash cloth with Isopropyl or similar alcohol cleaner to create a nice clean surface for the HAT-TAC™ to stick onto. Our recommendation is to find a smooth clean surface with little texture. * After prepping the surface: Grab the tab sticking out and peel away the red backing with ease. HAT-TAC™ attaches to the wall using a foam medium hold double sided adhesive. * Position: Align your HAT-TAC™ a few centimeters off the wall, making sure to the top so is perfectly level. * Last step: Push softly, just enough to hold the HAT-TAC™ in place on the surface. Take a few steps back to make sure it is exactly where you want it positioned. If the positioning is perfect, push and hold the back side of the HAT-TAC™ to the wall firmly for 30 seconds then wait 30 minutes before hanging a hat. Manufacturer Instructions for How to Remove: * Step One: Firmly grab each side of the HAT-TAC™ with both hands. * Step Two: Slowly wiggle the HAT-TAC™ up and down to separate the adhesive back from the wall. Be careful during this step as removing too fast or incorrectly could peel paint. FINAL SALE |
Close
|
Patchwork Herringbone Wool Ivy Cap |
---|
Designed in Sweden; Made in Estonia Inspired by Italy, Wigen Cap's Patchwork Herringbone Wool Ivy Cap is fashioned of genuine Bottoli Lanificio di Vittorio Veneto Italian fabric. This is 100% wool and features a classic ivy design. An attractive multicolored herringbone patchwork is adorned with an extended, sewn bill, grosgrain ribbon sweatband, and satin lining. Approx. 11" Front to Back, Flat 8 3/4" Side to Side, Flat 2 1/8" Pre-Curved Sewn Bill Made of: 100% Italian Wool Designed in Sweden Made in Estonia Fabric by Bottoli Lanificio di Vittorio Veneto, Italy, Established in 1861 Extended Bill Patchwork Pattern Wigens Logo Metal Bar Grosgrain Ribbon Sweatband Satin Lining Size(s): 54cm (S) - 65cm (XXXL); fits true to size. |
Close
|
NuStraw Straw Hat Cleaner |
---|
Made in the USA Bickmore's NuStraw is a gentle formula that removes surface dirt and grime from colorfast straw hats, including most oil and water based stains. Proudly formulated and manufactured in the USA, NuStraw is great for cleaning your entire hat or just spot cleaning. For best results, follow all manufacturer instructions for use (below). Size: (1) 4 Fl Oz Bottle Manufacturer Instructions for Use: * Always check for colorfastness in a hidden area before using. * Shake bottle well before using. * Remove surface dirt with a soft brush. * Pour a small amount of NuStraw on a soft moist sponge. * Rub the spot in a circular motion from the center out. * Wipe the area clean with a clean, damp cloth. FAQ: How often should NuStraw be used? A lot depends on the use and conditions your hat is subject to. It is best to clean a stain as soon as it appears. If you wait before cleaning a stain, it could "set" thus making it very difficult to remove later. What makes NuStraw superior to other cleaners? Formulated specifically for straw hats. The detergent based formula will not leave a chemical cleaning ring or residue which can actually attract dust and dirt. Can remove most oil and water based stains without pulling color. |
Close
|
Check Plaid Wool and Cashmere Ivy Cap |
---|
Designed in Sweden; Made in Estonia A classic checked plaid inspired by Italy, Wigens Cap's Check Plaid Wool and Cashmere Ivy Cap! Made of a luxurious wool and cashmere blend fabric designed by Bottoli Lanificio di Vittorio Veneto. Features a classic ivy design, attractive multicolored check plaid, sewn bill, grosgrain ribbon sweatband, and satin lining. Approx. 10" Front to Back, Flat 8 3/4" Side to Side, Flat 1 1/2" Pre-Curved Sewn Bill Made of: 97% Italian Wool 3% Italian Cashmere Designed in Sweden Made in Estonia Fabric by Bottoli Lanificio di Vittorio Veneto, Italy, Established in 1861 Check Plaid Pattern Wigens Logo Metal Bar Grosgrain Ribbon Sweatband Satin Lining Size(s): 54cm (S) - 65cm (XXXL); fits true to size. |
USA: 1-888-VHS-HATS (1-888-847-4287)
INT'L: +1 619-906-4440 Se habla español
Shop for Hats at VillageHatShop.com | Privacy Policy | Website Accessibility | Site Map
Copyright © 1999-2020 Village Hat Shop: The #1 Source for Hats Online
*ALL SPECIAL OFFERS AND DISCOUNTS
Excludes wholesale/B2B, Certain Brand Restrictions, Special Orders or Where Otherwise Noted.
CONTACT USWe are happy to help! |
1 (888) 847-4287Mon-Sun 8am-4:00pm |