Close
|
Braided Leather Chin Strap |
---|
The Village Hat Shop presents the Braided Leather Chin Strap, the best method to ensure against the loss of your hat in wind or brush. Chin cord/straps, known in cattle country as stampede strings, provide security and assurance your hat will stay put. This chin cord/strap is practical, and the genuine leather looks fantastic, and built to last. Anyone who wants to keep their hat from blowing away will find it useful. Featuring a sliding wood bead that joins together two, four plait braids of leather, adjustable for total comfort. The Braided Leather Chin Strap works with a variety of hats, it's so easy to install, you'll want one for every hat you own. For best results, please follow all instructions for use (below). Instructions for Use: * Hold the cotter pins tightly together and push them through the stitching where the sweatband meets the body. * Pull the pins completely through the base of the sweatband until the braid is firmly against the sweatband. * Spread and bend the pins outward, as close to horizontal as possible. * Once bent, the pins provide a secure attachment of the chin strap. Approx. 22" Length (Excluding End Pins) Made of: 100% Leather Sliding Wood Bead Four Plait Braided Leather on Each Cord/Strap Metal D-Ring Attachments Metal Cotter Pins Size: One Size Fits Most |
Close
|
Hard Plastic Western Hat Can Carrier - Black |
---|
Please Note: This item may have gold OR silver tone clasps (gold tone is featured in the photos above). This feature is assorted and hardware color cannot be selected. Made in the USA Traveling with hats can be a burden but the Hard Plastic Western Hat Can/Carrier helps to solve this problem. Your hat sits upon the inner hat rest that can be adjusted to fit any hat size via the wing-nuts on the bottom of the case. The hat then floats on the rest and the brim is safe from damage. Approx. 9" Height 17" Width 16" Depth Made of: Hard Plastic Made in the USA Stiff Plastic - Protect & Store Your Hats! Handle - Lays Flat When Not in Use (2) Metal Clasps - Secure Lid in Place Crown Insert - Adjusts via Wingnuts Under Carrier Fits Hats up to 5" Crown Fits Hats up to 4" Brim Size: One Size - Fits hats up to 5" Crown and 4" Brim. |
Close
|
Felt Hat Brush |
---|
Information from the book Stetson Hats: "Whether vintage or modern, dust your hat daily with a soft-bristled brush. Stiff bristled brushes will tear the felt. Western stores frequently sell hatter's brushes for this dusting job." For the best maintenance and care of your hat(s), use a dark-colored brush for dark hats and a light colored brush for light hats. For best results, please follow all instructions for use (below) or watch the video here. Approx. 10 5/8" Length 3/4" - 1 1/4" Width Made of: 100% Maple Wood 100% Horse Hair Bristles Size: One Size Instructions for Use: * Brush counter-clockwise direction on the top of your hat. * Brush clockwise direction under the brim. * Brush daily. For Bulk/Wholesale purchase of this hat brush, CLICK HERE or call us at 1-888-847-4287. |
Close
|
Repel Spray |
---|
Made in the USA Jason Markk's Repel Spray comes to you with a water-based propellent free formula to keep your materials free from stains and will effectively repel liquids. This spray creates a durable, breathable barrier. More environmentally friendly than aerosols, Jason Markk's Repel Spray is engineered with multi-patented flairosol technologies. The odorless and colorless sprays as fine mist, that covers large areas quickly and distributes product evenly. Made in the USA by Jason Markk! For best results, follow all manufacturer instructions on back of bottle (below). Manufacturer Instructions for Use: * Always check for color-fastness in a hidden area before using. * Material should be clean and dry prior to application. * Hold the bottle upright 6" to 8" from material, spray evenly covering the entire surface area. * Do not oversaturate. * Before exposing it to liquid, make sure the material has completely dried. Approx. 5.4 Oz Spray Bottle Made in the USA Water-Based Formula Durable, Breathable Barrier Repels Liquid and Stains Safe on Suede, Nubuck, Unsealed Leather, Canvas and Nylon Reusable Spray Applicator Size(s): One Size |
Close
|
Hat Cleaning Sponge |
---|
Made in the USA The Village Hat Shop Hat Cleaning Sponge is the serious hatter's tool of choice when cleaning surface spots on hats. Easily wipes away dirt, dust and grime. It is always used dry and cleans without chemicals. Like a pencil eraser, one carefully rubs the surface spot until it "balls up" and can be brushed away. Can be used on all shades of hats - for best results, use a separate sponge for each different color of hat. For best results, please follow all manufacturer instructions for use (below). Approx. 3 3/4" Length 2 1/8" Width Made of: 100% All Natural Latex Rubber Size: (1) Sponge Manufacturer Instructions for Use: * Always use dry. * Locate the soiled area and gently rub the sponge upon the spot. Any debris can be brushed into a trash receptacle. * When the surface of the sponge becomes clogged with dirt/grime, simply remove a layer by shaving with a razor blade or cutting off the section with a pair of scissors; or replace with a new sponge. * Do not wring out the sponge with water or clean it with any chemicals/cleansers. |
Close
|
Hard Plastic Single Hat Can Carrier |
---|
Please Note: The larger the hat size, the less space will remain for the brim. Hats larger than 7 3/8 (L) will have less brim space; these will still fit but the brim might need to be curled up a bit. You might consider the Western Hat Can for larger hat sizes and/or wider brims. Made in the USA If you travel and love to wear hats, this is the perfect companion for that beloved accessory. Traveling with hats can be a burden but the Hat Can/Carrier solves this problem. Your hat sits upon the inner hat rest that can be adjusted to fit any hat size via the wing-nuts on the bottom of the case. The hat then floats on the rest and the brim is safe from damage. This is a perfect house for your special hat. Approx. 10" Height 13" Width 11 1/4" Depth Made of: Hard Plastic Made in the USA Stiff Plastic - Protect & Store Your Hats! Handle - Lays Flat When Not in Use 2 Brass Buckles - Secure Lid in Place Crown Insert - Adjusts via Wingnuts Under Carrier Fits Hats up to 7" Crown Fits Hats up to 2 1/4" Brim Size: One Size - Fits hat up to 7" Crown and 2 1/4" Brim. |
Close
|
Six Baseball Cap Carrier |
---|
The Village Hat Shop Six Baseball Cap Carrier provides storage and transport, all in one. It provides headwear collectors a stylish way to transport, store, and protect their baseball caps. This crushproof neoprene case stores six caps and features four eyelets for ventilation, a removable shoulder strap for easy transport, and a convenient double zip closure. The elasticized adjustable straps ensures the lid remains open with ease, unclip the buckles for a complete open display. This is the perfect gift for the baseball cap collector who likes to travel with their favorites! Approx. 11" Height 9" Width 6" Depth Made of: 100% Polyester Fits Up to 6 Caps Stiff, Lightweight Neoprene - Crushproof Reinforced Rubber Handle - Top Metal Eyelets for Ventilation Closes via Double Zipper Adjustable, Removable Shoulder Strap Included Printed VillageHatShop.com Logo Size: One Size; fits up to 6 baseball caps. |
Close
|
Finished Leather Cleaning Kit |
---|
Give your beloved leather hats and accessories some much needed TLC with the new Finished Leather Cleaning Kit! Featuring Bickmore's famous Bick 4 leather conditioner and a soft suede and fleece cleaning cloth, this kit includes all you need to care for your leather goods. The Bick 4 conditioner is specially formulated to clean, condition, polish and protect. Don't let your leather hats lose their luster - get your Finished Leather Cleaning Kit today! For best results, follow all manufacturer instructions for use. Accessory Kit Includes: * (1) Bick 4 Leather Conditioner - Specially formulated to clean, condition, polish & protect. * (1) Suede & Fleece Soft Cleaning Cloth Specifications: * Bick 4 Bottle - 2 Fl Oz * Cloth - Approx. 4 1/2" Diameter |
Close
|
Premium Microfiber Towel |
---|
The perfect addition to your cleaning arsenal, the Premium Microfiber Towel by Jason Markk. The perfect material for getting ride of excess liquid thanks to its absorbent, quick drying, hypoallergenic, lint free and non-abrasive design. Can hold up to 7 times its weight in water. With microfibers finer than human hair and then sliced 16 times, this towel contains millions of microscopic hooks to capture dirt and dust without causing damage. Machine washable and durable for over 300 wash cycles, this is an item you can count on to get the job done. For best results, follow all manufacturer instructions on back of packaging (below). Manufacturer Instructions for Use: * Clean and absorb. * Hang dry after each use. * Machine wash (cold or warm temperature only), do not use bleach or fabric softeners. * Air dry (or tumble dry on low temperature), without dryer sheets. Approx. 12" L x 12" W Absorbent - 7 Times Its Weight in Water Quick Drying Hypoallergenic Lint Free Non-Abrasive Machine Washable - Durable over 300 Wash Cycles Sewn Jason Markk Label Size(s): One Size |
USA: 1-888-VHS-HATS (1-888-847-4287)
INT'L: +1 619-906-4440 Se habla español
Shop for Hats at VillageHatShop.com | Privacy Policy | Website Accessibility | Site Map
Copyright © 1999-2020 Village Hat Shop: The #1 Source for Hats Online
*ALL SPECIAL OFFERS AND DISCOUNTS
Excludes wholesale/B2B, Certain Brand Restrictions, Special Orders or Where Otherwise Noted.
CONTACT USWe are happy to help! |
1 (888) 847-4287Mon-Sun 8am-4:00pm |