Close
|
3-Pleat Cotton Puggaree Hat Band |
---|
A new hat band can do wonders to freshen up any old hat, may we suggest the 3-Pleat Cotton Puggaree Hat Band by Capas Headwear. Featuring a multitude of great colors, this pug hat band is made of 100% cotton. Need to dress your hat up in something new? Look no further than the 3-Pleat Cotton Puggaree Hat Band - a fresh new look to your favorite hat! For best results, please follow all instructions for use (below). *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. Approx. 28" Total Length, End to End 1 7/8" Width Made of: 100% Cotton 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! |
Close
|
3-Pleat Satin Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a multitude of great colors, the 3-Pleat Satin Puggaree Hat Band will give a fresh new look to your favorite hat. For best results, please follow all instructions for use (below). Approx. 28" Total Length, End to End 2" Width Made of: 100% Satin 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Paisley 3-Pleat Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a classic paisley print in varying colors, the Paisley 3-Pleat Puggaree Hat Band by Capas Headwear will give a colorful new twist to your favorite hat. For best results, please follow all instructions for use (below). Approx. 29" Total Length, End to End 1 7/8" Width Made of: 100% Polyester 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Viking Helmet with Mask and Dragon |
---|
Handmade in Mexico What makes a Viking Helmet even more unique? A Dragon of course, one of the most feared and revered creatures in mythology. With the dreki or ormr on top of your head, is Ragnarok in the near future? We suggest wearing a beanie or bandana as a base layer under the helmet for comfort. Approx. 5 1/2" Crown 12" Horns (Length Can Vary) Made of: Helmet Body - 100% 22-Gauge Steel Ear Flaps & Chin Cord - 100% Leather Horns - 100% Cattle Horns Hand Welded 22 Gauge Steel Hand Sculpted Dragon and Mask Authentic Cattle Horns, Color and Shape Vary Leather Ear Flaps and Chin Cord Novelty Headwear, Not Historically Accurate Not Safety Certified as Protective Headgear Removable Foam Inserts for Size Adjustment Size(s): One Size Fits Most; fits up to size 7 1/2 (XL) comfortably. |
Close
|
Stampede String Chin Strap |
---|
Made in the USA Hold on to your hat! Chin cord/straps, known in cattle country as stampede strings, ensure against the loss of your hat in wind or brush. The Stampede String Chin Strap isn't only for ranchers working cattle on the open range. Anyone who wants to keep their hat from blowing away will find it useful. Featuring a sliding knot that joins together two, four plait braids of leather, this chin cord/strap is practical and looks great! How it works: Two cotter pins slide between the sweatband and the hat body. Once bent, they provide a secure attachment of the stampede string. Approx. 19" Length (Excluding End Pins) Made of: 100% Kangaroo Leather Sliding Knot Four Plait Braided Leather on Each String Size: One Size Fits Most Manufacturer Instructions for Use: * Hold the cotter pins tightly together and push them through the stitching where the sweatband meets the body. * Pull the pins completely through the base of the sweatband until the braid is firmly against the sweatband. * Spread the pins outward, as close to horizontal as possible. * Check by tugging on the braid. |
Close
|
Viking Helmet with Horns |
---|
Handmade in Mexico It has been recently discovered that the real Viking Helmets did not have horns. But, our customers still like them, so we still make them. Wear this to a Nordic Festival, to the movies, Vikings games, or on Halloween. Flavor Flav has taken a liking to this helmet and is seen wearing it on his VH1 show, "Flavor of Love". Raab Himself, one of Bam Margera's crew, wears this helmet as a future Civil War Soldier in a re-enactment. Most recently seen in the mini series, "Hawkeye", during a larping scene. We suggest wearing a beanie or bandana as a base layer under the helmet for comfort. Approx. 4 1/2" Crown 11" Horns (Length Can Vary) Made of: 22 Gauge Steel 100% Leather 100% Cattle Horns Hand Welded 22 Gauge Steel Authentic Cattle Horns, Color and Shape May Vary Leather Ear Flaps and Chin Cord Novelty Headwear, Not Historically Accurate Not Safety Certified as Protective Headgear Removable Foam Inserts for Size Adjustment Size(s): One Size Fits Most; fits up to size 7 1/2 (XL) comfortably. |
Close
|
Starburst 3-Pleat Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a great new starburst print in varying colors, the Starburst 3-Pleat Puggaree Hat Band by Capas Headwear will give a colorful new twist to your favorite hat. Approx. 29" Total Length, End to End 1 7/8" Width Made of: 100% Polyester Instructions for Use: * Fasten the unfinished end of the pug band on the lower left side of the crown. * Wrap hatband around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hatband closest to the base of the crown. *Traditionally, men's hatbands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! |
Close
|
Polka Dot 3-Pleat Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring classic white polka dots against black, brown or navy, the Polka Dot 3-Pleat Puggaree Hat Band by Capas Headwear will add a fresh new twist to your favorite hat. For best results, please follow all instructions for use (below). Approx. 26 1/2" Total Length, End to End 1 7/8" Width Made of: 100% Cotton 3-Pleat Puggaree Hat Band Cotton Twill Fabric Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Viking Helmet With Mask and Horns |
---|
Handmade in Mexico We have seen many Viking helmets and none compare to this one; a Classic Viking Helmet with a Mask. The quality of this item is unsurpassed. We suggest wearing a beanie or bandana as a base layer under the helmet for comfort. Approx. 4 3/4" Crown 12" Horns (Length Can Vary) Made of: 22 Gauge Steel 100% Leather 100% Cattle Horns Hand Welded 22 Gauge Steel Hand Sculpted Mask Authentic Cattle Horns, Color and Shape May Vary Leather Ear Flaps and Chin Cord Novelty Headwear, Not Historically Accurate Not Safety Certified as Protective Headgear Removable Foam Inserts for Size Adjustment Size(s): One Size Fits Most; fits up to size 7 1/2 (XL) comfortably. |
USA: 1-888-VHS-HATS (1-888-847-4287)
INT'L: +1 619-906-4440 Se habla español
Shop for Hats at VillageHatShop.com | Privacy Policy | Website Accessibility | Site Map
Copyright © 1999-2020 Village Hat Shop: The #1 Source for Hats Online
*ALL SPECIAL OFFERS AND DISCOUNTS
Excludes wholesale/B2B, Certain Brand Restrictions, Special Orders or Where Otherwise Noted.
CONTACT USWe are happy to help! |
1 (888) 847-4287Mon-Sun 8am-4:00pm |