Close
|
Packable Cotton Twill Safari Fedora Hat |
---|
Please Note: This style runs large, see sizing breakdown below or call 1-888-847-4287 for help with sizing. M = 7 3/8 L = 7 1/2 - 7 5/8 XL = 7 3/4 - 7 7/8 2XL = 7 7/8 -8 3XL = 8+ UPF 50+ Sun Protection Do you remember your all-time favorite hat? Beat and rumpled, you put it on and felt like Indiana Jones. This is that hat, only nice and clean. The Scala Packable Washed Twill Safari Fedora Hat shows up pre-rumpled and soft as if you've owned it for years. Approx. 4" Center Pinch Crown 2 1/4" Downturned Brim Made of: 100% Washed Cotton Twill Waxed Cotton Hat Band Two Side Eyelets for Ventilation Cotton Twill Sweatband Unlined Packable Lightweight Sizes: M - 3XL (Khaki) and M - XL (Olive); runs large, please see disclaimer at top. |
Close
|
3-Pleat Cotton Puggaree Hat Band |
---|
A new hat band can do wonders to freshen up any old hat, may we suggest the 3-Pleat Cotton Puggaree Hat Band by Capas Headwear. Featuring a multitude of great colors, this pug hat band is made of 100% cotton. Need to dress your hat up in something new? Look no further than the 3-Pleat Cotton Puggaree Hat Band - a fresh new look to your favorite hat! For best results, please follow all instructions for use (below). *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. Approx. 28" Total Length, End to End 1 7/8" Width Made of: 100% Cotton 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! |
Close
|
Cotton Hat Sizer |
---|
Please Note: This item sells as a SINGLE sizing strip in either Black or White. Made in the USA Find yourself in-between hat sizes? Need a better fit? Prefer the added comfort of a cotton sweatband? All this can be achieved with the Cap-Ban-Nu Cotton Hat Sizer ideal for sizing your hat down by half a size! For best results, please follow all instructions for use (below). Instructions: * Remove tape backing from product. * Stick to the front section of the hat's sweatband or whatever area the hat has a loose fit (front, back or sides). You can also place the sizer behind the sweatband, directly onto the hat, or onto the backside of the sweatband. * Discard the used strip when soiled and replace. Approx. 10 3/4" Length 1" Width 2.5 MM Thick Made of: 100% Cotton Jersey Size: One single sizer per pack. One Size Fits Most. |
Close
|
Paisley 3-Pleat Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a classic paisley print in varying colors, the Paisley 3-Pleat Puggaree Hat Band by Capas Headwear will give a colorful new twist to your favorite hat. For best results, please follow all instructions for use (below). Approx. 29" Total Length, End to End 1 7/8" Width Made of: 100% Polyester 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
3-Pleat Satin Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a multitude of great colors, the 3-Pleat Satin Puggaree Hat Band will give a fresh new look to your favorite hat. For best results, please follow all instructions for use (below). Approx. 28" Total Length, End to End 2" Width Made of: 100% Satin 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Leather Greek Fisherman's Cap |
---|
Made in Greece Capas Headwear is giving the fisherman's cap some street credit with a leather body in their latest fall headpiece, the Leather Greek Fisherman's Cap. Made of genuine leather, details include a double-layered cord hat band, decorative bill accent, leather sweatband and satin lining. A practical design this cap is dressed up for a night on the town. Approx. 1 7/8" Soft Crown 3/4" Structured Band 2 1/8" Bill/Visor Made of: 100% Leather Double-Layered Cord Hat Band Leather Side Buttons Decorative Bill Accent Leather Sweatband Satin Lining Sizes: S, M, L and XL; fits true to size. |
Close
|
Terry Cloth Hat Sizer |
---|
Please Note: This item sells as a SINGLE sizing strip in either Black or Tan. Made in the USA Find yourself in-between hat sizes? Need a better fit? Prefer the added comfort of a terry cloth sweatband? All this can be achieved with the Cap-Ban-Nu Terry Cloth Hat Sizer that can size your hat down half a size! For best results, please follow all instructions for use (below). Instructions: * Remove tape backing from product. * Stick to the front section of the hat's sweatband or whatever area the hat has a loose fit (front, back or sides). You can also place the sizer behind the sweatband, directly onto the hat, or onto the backside of the sweatband. * Discard the used strip when soiled and replace. Approx. 10 3/4" Length 1 1/8" Width 5 MM Thick Made of: 100% Cotton Terry Cloth Size: One single sizer per pack. One Size Fits Most. |
Close
|
Kids' Wool Felt C-Crown Trilby Fedora Hat |
---|
Whether you need it for a Halloween costume or a school play, or maybe your little one wants to start a trend. The wool felt C-Crown Stingy Brim Fedora is a scaled down version of a classic shape. Approx. 3 1/2" C-Crown (Teardrop) 1 1/4" Overwelt Stingy Brim Made of: 100% Wool Felt 1" Wide Grosgrain Ribbon Hat Band Vinyl sweatband Unlined Sizes: Child's S, M, L, and XL. Suggested for: Kids 2-10 Years Old (see chart below): Age Inches CMS Hat Size Size 1 - 2 years 18 7/8 48 6 Small 2 - 4 years 19 5/8 50 6 1/4 Medium 5 - 7 years 20 3/8 52 6 1/2 Large 8 - 10 years 21 1/8 54 6 3/4 X-Large |
Close
|
Chincord Toyo Straw Western Hat |
---|
Giddy up, cowgirl! Dorfman introduces their newest Chincord Toyo Straw Western Hat crafted of lightweight toyo straw in a classic western design. The Chincord Western keeps things simple with a tonal cord hat band twisted around the crown then pulled through the brim to become an adjustable chincord. Additional features include a shapeable wire brim and an elasticized terry sweatband for comfort and a superior fit. Enjoy the timeless look and functional design of the Chincord Toyo Straw Western Hat! Approx. 4 1/2" Teardrop Crown - Front 4" Teardrop Crown - Back 3 3/8" Wired Shapeable Brim Made of: 100% Toyo Straw Cord Hat Band & Pull-Through Chincord Metallic Sun Pin - Front Shapeable Wire Brim - Adjust to Your Liking! Elasticized Terry Sweatband Unlined Lightweight Sizes: S/M fits sizes 6 3/4 (XS) - 7 (M), approximately; L/XL fits sizes 7 1/8 (M) - 7 3/8 (L), approximately. |
Close
|
Golf Ball Hat-Tac |
---|
FINAL SALE Made in the USA Never again worry about your hats becoming misshapen, sagging, or losing their curve, thanks to the Golf Ball Hat-Tac. This revolutionary invention sticks to any surface thanks to the 3M foam adhesive backing, and the fixed curve platform allows hats to comfortably rest in an upright position. With this patented and trademarked design, your ball cap, fedora, or any other piece of headwear will never lose its curve. This is the perfect place to hang your hat! Approx. 45.5 mm High 97 mm Wide 50 mm Deep Made in the USA 3M Foam Adhesive Backing Fixed Curve Platform Golf Ball and Putting Green Print Sturdy and Reliable Works for Hats of All Sizes Manufacturer Instructions for How to Apply: * Prep surface: Take a soft wash cloth with Isopropyl or similar alcohol cleaner to create a nice clean surface for the HAT-TAC™ to stick onto. Our recommendation is to find a smooth clean surface with little texture. * After prepping the surface: Grab the tab sticking out and peel away the red backing with ease. HAT-TAC™ attaches to the wall using a foam medium hold double sided adhesive. * Position: Align your HAT-TAC™ a few centimeters off the wall, making sure to the top so is perfectly level. * Last step: Push softly, just enough to hold the HAT-TAC™ in place on the surface. Take a few steps back to make sure it is exactly where you want it positioned. If the positioning is perfect, push and hold the back side of the HAT-TAC™ to the wall firmly for 30 seconds then wait 30 minutes before hanging a hat. Manufacturer Instructions for How to Remove: * Step One: Firmly grab each side of the HAT-TAC™ with both hands. * Step Two: Slowly wiggle the HAT-TAC™ up and down to separate the adhesive back from the wall. Be careful during this step as removing too fast or incorrectly could peel paint. FINAL SALE |
Close
|
Kids' Wool Felt Derby Hat |
---|
The Kids' Wool Felt Derby Hat is made of 100% wool felt and available in children's sizes. Ideal for formal events, dress up or play time - the Kids' Derby (aka Bowler) Hat can do it all! Featuring the classic trimmings including grosgrain ribbon hat band with side bow and side feather, there is nothing "novelty-ish" about this perfect little gentleman's hat! Approx. 4" Round Crown 2" Curled Brim Made of: 100% Wool Felt - Stiff Finish Grosgrain Ribbon Hat Band (1" Wide) Faux Leather Sweatband Capas Logo Crown Tip Unlined Sizes: Child's S, M, L, and XL. Suggested for: Kids 2-12 Years Old (see chart below): Age Inches CMS Hat Size Size 1 - 2 years 18 7/8 48 6 Small 2 - 4 years 19 5/8 50 6 1/4 Medium 5 - 7 years 20 3/8 52 6 1/2 Large 8 - 12 years 21 7/8 56 7 X-Large |
Close
|
Holebrook Brushed Poly Blend Outback Hat |
---|
Dorfman Pacific Company's Holebrook Brushed Poly Blend Outback Hat blends the rugged style of a western with durable modern materials. The teardrop crown, weathered finish and faux leather/cord combo hat band conjure thoughts of wide open spaces and a horse or two, while the medium width, wired shapeable brim is a classic outback detail. Metal grommet eyelets have been added for extra breathability, allowing direct airflow to the crown's interior. Approx. 4 1/8" Teardrop Crown 3" Wired Shapeable Brim Made of: 92% Polyester 8% Nylon Weathered Corduroy Finish Metal Grommet Eyelets - For Ventilation Faux Leather/Cord Combo Hat Band Self-Fabric Binding on Brim Self-Fabric Chin Cord with Adjustable Toggle Self Fabric Sweatband Inseam Taping Plaid Pattern Lining Size(s): M, L, and XL, fits true to size. |
Close
|
Starburst 3-Pleat Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a great new starburst print in varying colors, the Starburst 3-Pleat Puggaree Hat Band by Capas Headwear will give a colorful new twist to your favorite hat. Approx. 29" Total Length, End to End 1 7/8" Width Made of: 100% Polyester Instructions for Use: * Fasten the unfinished end of the pug band on the lower left side of the crown. * Wrap hatband around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hatband closest to the base of the crown. *Traditionally, men's hatbands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! |
Close
|
Stingy Brim Toyo Straw Fedora Hat |
---|
We love a quality trilby and Stingy Brim Toyo Straw Fedora Hat by Dorfman Pacific Company! Beautifully crafted of toyo straw which has been constructed into a stingy 1 3/4" brim and a necktie inspired hat band. To top it all off, this fedora is lined for maximum comfort. Approx. 3 1/4" Teardrop Crown 1 3/4" Pre-Snap Brim Made of: 100% Toyo Straw Semi Flexible Body Necktie Inspired Hat Band Dorfman Pacific Hat Pin Overwelt Brim Ribbon Sweatband Inseam Taping Fabric Lining Size(s): M and L; fits true to size. |
Close
|
Vented Toyo Straw Ascot Ivy Cap |
---|
Breathability is your first priority with the Vented Toyo Straw Ascot Ivy Cap from Capas Headwear! This functional cap features an open weave twisted toyo straw body that is reliable and comfortable, especially when paired with the cotton twill sweatband. You'll always look stylish with this cap on your head! Approx. 8 1/2" Diameter 2" Visor Made of: 100% Toyo Straw Woven Straw Body Firm/Stiff Bodyh Cotton Twill Sweatband Unlined Sizes: S, M, L and XL; fits true to size. |
Close
|
Soho Poly Braid Stingy Brim Fedora Hat |
---|
Made in the USA A new stingy brim fedora for our trilby fans, the Soho Poly Braid Stingy Brim Fedora Hat by Capas Headwear. A retro design with a stingy snap brim and center pinch crown, the Soho is accented with an extra wide grosgrain ribbon hat band, bow detailing and a faux feather accent piece. To finish off this simple yet stylish hat, a cotton twill sweatband has been added for maximum comfort. Approx. 3 3/4" Center Pinch Crown 1 3/8" Snap Brim Made of: 100% Poly Braid Made in the USA Braided and Sewn Design Extra Wide Grosgrain Ribbon Hat Band Bow Detailing Side Feather (Removable) Cotton Twill Sweatband Unlined Size(s): S, M, L and XL; fits true to size. |
Close
|
Bowline Ponytail Swimwear Fitted Baseball Cap |
---|
Dorfman Pacific Company's the Bowline Ponytail Swimwear Fitted Baseball Cap is perfect for anyone looking to keep their hair up and off their face. Features a ponytail opening at the top of the crown. This is a fitted baseball cap and a swimwear item with a soft lining and elastic sweatband. Approx. 4" Crown 3" Pre-Curved Brim Made of: 100% Polyester Ponytail Opening - Top of Crown Soft, Breathable Lining Elastic Sweatband Size(s): One Size Fits Most - Fits up to 7 3/8 (L) comfortably. |
Close
|
Summit Ribknit Radar Cap Beanie Hat |
---|
This historical silhouette is also known as a Jeep Cap, a style that originated during WWII. Dorfman Pacific Company has updated the hybrid design of beanie/ball cap with the Summit Ribknit Radar Cap Beanie Hat. The rib-knit crown hugs your head and keeps you warm. The vegan suede bill/visor helps to shield the sun from your eyes and to reduce any glare from surrounding surfaces. The Summit Ribknit Radar Cap is not only practical, but fashionable too. Approx. 7 1/2" Height - Flat 2" Pre-Curved Bill/Visor Made of: 65% Acrylic 35% Wool 6-Seam Crown Rib-Knit Body Vegan Suede Bill/Visor Cuffed Rubberized Logo Unlined Size(s): One Size Fits Most. Fits up to size 7 3/4 (XXL) comfortably. |
Close
|
Constitution Knit Beanie Hat |
---|
Dorfman Pacific Company debuts the Constitution Knit Beanie Hat for this fall season. The two-tone rib knit body reveals a striped pattern when worn, creating a dynamic backdrop for the US Flag patch. The acrylic, nylon blend yarn is soft and comfortable, and will keep you warm and toasty. Approx. 8 3/4" Height - Flat 8 1/2" Width - Flat 3" Cuff - Flat Made of: 65% Acrylic 35% Nylon 6-Seam Crown USA Flag Front Patch Rib-Knit Body Cuffed Unlined Size(s): One Size Fits Most. Fits up to size 7 3/4 (XXL) comfortably. |
Close
|
Kid's Blues Crushable Wool Felt Trilby Fedora Hat |
---|
Who says only the grown-ups can style the classic fedora look!? The younger generation can look sharp as well in the Capas Headwear Crushable Blues Fedora Hat. A cotton linen blend pleated hat band wraps around the pinch front center dent crown and is detailed with a removable side feather. Approx. 3 1/2" Center Pinch Crown 2" Snap Brim Made of: 100% Wool Felt Cotton/Linen Blend Pleated Puggaree Hat Band Cotton Sweatband Crushable Removable Side Feather Unlined Sizes: Child's S, M, L, and XL. Suggested for: Kids 2-10 Years Old (see chart below): Age Inches CMS Hat Size Size 1 - 2 years 18 7/8 48 6 Small 2 - 4 years 19 5/8 50 6 1/4 Medium 5 - 7 years 20 3/8 52 6 1/2 Large 8 - 10 years 21 1/8 54 6 3/4 X-Large |
Close
|
Gabon Leopard Scarf Toyo Straw Fedora Hat |
---|
UPF 50+ Sun Protection We just can't get enough of leopard-print for the coming season and thanks to Dorfman Pacific Company and the Gabon Leopard Scarf Toyo Straw Fedora Hat, we have another fantastic addition to our collection. A matte leopard-print scarf hat band adorns the crown of this attractive midsize brim fedora. Made of 100% toyo straw, this hat is breathable and crushable. Perfect for your next adventure under the sun! Approx. 3 7/8" Center Pinch Crown 2 3/4" Downturned Brim Made of: 100% Toyo Straw UPF 50+ Sun Protection Packable/Crushable Design Chiffon Leopard-Print Scarf Hat Band - Tied In Back Grosgrain Ribbon Sweatband Unlined Size(s): One Size Fits Most - Fits up to size 7 (M) comfortably. |
Close
|
Birch Removable Face Shield Trooper Cap |
---|
Dorfman Pacific Company's Birch Removable Face Shield Trooper Cap is for when you need extra weather protection. For when the temperature gets frigid, this trooper features a removable face shield, vegan fur-lined earflaps, as well as hook and loop-attachable chinstrap. The interior of the cap is also lined with vegan fur. Stay warm with the Birch Removable Face Shield Trooper Cap by Dorfman Pacific Company! Approx. 11" Top to Bottom, Flat (Including Earflaps) 14" Front to Back, Flat (Including Chinstrap) Made of: 100% Nylon Flexible Design Removable Face Shield Vegan Fur-Lined Earflaps Vegan Fur-Lined Chinstrap - Secure via Hook and Loop Vegan Fur Lining Size(s): M, L and XL; fits true to size. |
USA: 1-888-VHS-HATS (1-888-847-4287)
INT'L: +1 619-906-4440 Se habla español
Shop for Hats at VillageHatShop.com | Privacy Policy | Website Accessibility | Site Map
Copyright © 1999-2020 Village Hat Shop: The #1 Source for Hats Online
*ALL SPECIAL OFFERS AND DISCOUNTS
Excludes wholesale/B2B, Certain Brand Restrictions, Special Orders or Where Otherwise Noted.
CONTACT USWe are happy to help! |
1 (888) 847-4287Mon-Sun 8am-4:00pm |