Close
|
Packable Cotton Twill Safari Fedora Hat |
---|
Please Note: This style runs large, see sizing breakdown below or call 1-888-847-4287 for help with sizing. M = 7 3/8 L = 7 1/2 - 7 5/8 XL = 7 3/4 - 7 7/8 2XL = 7 7/8 -8 3XL = 8+ UPF 50+ Sun Protection Do you remember your all-time favorite hat? Beat and rumpled, you put it on and felt like Indiana Jones. This is that hat, only nice and clean. The Scala Packable Washed Twill Safari Fedora Hat shows up pre-rumpled and soft as if you've owned it for years. Approx. 4" Center Pinch Crown 2 1/4" Downturned Brim Made of: 100% Washed Cotton Twill Waxed Cotton Hat Band Two Side Eyelets for Ventilation Cotton Twill Sweatband Unlined Packable Lightweight Sizes: M - 3XL (Khaki) and M - XL (Olive); runs large, please see disclaimer at top. |
Close
|
Capper Cotton Newsboy Cap |
---|
Please Note: This style runs large. Call us at 1-888-847-4287 for help with sizing. The Dorfman Pacific Company has been making authentic handmade headwear since the 1920s and they continue this tradition with the Capper Cotton Newsboy Cap. Its 100% cotton design along with unlined interior makes this lightweight hat suitable for warmer weather. Comes in a classic newsboy silhouette in wardrobe-friendly black or white. Approx. 8 1/2" Length, Flat 9" Width, Flat 1 1/8" Single Snap Bill Made of: 100% Cotton Classic 8-Panel (8/4) Cap Design Top Button Cotton Sweatband Inseam Taping Unlined Size(s): S, M, L and XL - Sizing runs large, see sizing disclaimer at top of description. |
Close
|
The Sou'wester Waxed Cotton Bucket Hat |
---|
Made in New Zealand Get the right amount of coverage with Hill Hats of New Zealand's Sou'wester Waxed Cotton Bucket Hat. Not only will you receive the durability and waterproofing properties that Hills Hats of New Zealand offers, the Sou'wester comes complete with an internal oilskin neck and ear flap protection that is lined in comfortable brushed cotton flannel to keep you warm from the elements. Approx. 4 1/4" Round Crown 2 7/8" Downturned Brim - Front 4 1/4" Downturned Brim - Back 3 1/2" Downturned Brim - Sides Made of: 100% Australian Oilskin (Waxed Cotton) Made in New Zealand 100% Australian Oilskin Brushed Cotton Flannel Lining Chin Cord Toggle and Keeper Internal Oilskin Neck and Ear Protection Flap Water Resistant Sizes: S, M, L, XL and XXL; fits true to size. |
Close
|
Hydrotex Rain Bucket Hat |
---|
Made in New Zealand You want to be dry and protected when the weather takes a turn for the worst so make sure to always have your packable Hills Hats of New Zealand Hydrotex Rain Bucket Hat with you. The unique characteristics of the Hydrotex Bucket has been tested to resist both water and wind chill while maintaining superior breathability and flexibility. Approx. 3 1/2" Square Crown 2" Downturned Brim Made of: Exterior - Hydrotex Fabric (95% Polyester, 5% P.U.) Lining - 100% Polyester Mesh Made in New Zealand Water & Windchill Resistant Cotton Blend Sweatband Mesh Lining Packable / Crushable Sizes: S, M, L, XL and XXL; fits true to size. |
Close
|
Stingy Brim Toyo Straw Fedora Hat |
---|
We love a quality trilby and Stingy Brim Toyo Straw Fedora Hat by Dorfman Pacific Company! Beautifully crafted of toyo straw which has been constructed into a stingy 1 3/4" brim and a necktie inspired hat band. To top it all off, this fedora is lined for maximum comfort. Approx. 3 1/4" Teardrop Crown 1 3/4" Pre-Snap Brim Made of: 100% Toyo Straw Semi Flexible Body Necktie Inspired Hat Band Dorfman Pacific Hat Pin Overwelt Brim Ribbon Sweatband Inseam Taping Fabric Lining Size(s): M and L; fits true to size. |
Close
|
Golf Ball Hat-Tac |
---|
FINAL SALE Made in the USA Never again worry about your hats becoming misshapen, sagging, or losing their curve, thanks to the Golf Ball Hat-Tac. This revolutionary invention sticks to any surface thanks to the 3M foam adhesive backing, and the fixed curve platform allows hats to comfortably rest in an upright position. With this patented and trademarked design, your ball cap, fedora, or any other piece of headwear will never lose its curve. This is the perfect place to hang your hat! Approx. 45.5 mm High 97 mm Wide 50 mm Deep Made in the USA 3M Foam Adhesive Backing Fixed Curve Platform Golf Ball and Putting Green Print Sturdy and Reliable Works for Hats of All Sizes Manufacturer Instructions for How to Apply: * Prep surface: Take a soft wash cloth with Isopropyl or similar alcohol cleaner to create a nice clean surface for the HAT-TAC™ to stick onto. Our recommendation is to find a smooth clean surface with little texture. * After prepping the surface: Grab the tab sticking out and peel away the red backing with ease. HAT-TAC™ attaches to the wall using a foam medium hold double sided adhesive. * Position: Align your HAT-TAC™ a few centimeters off the wall, making sure to the top so is perfectly level. * Last step: Push softly, just enough to hold the HAT-TAC™ in place on the surface. Take a few steps back to make sure it is exactly where you want it positioned. If the positioning is perfect, push and hold the back side of the HAT-TAC™ to the wall firmly for 30 seconds then wait 30 minutes before hanging a hat. Manufacturer Instructions for How to Remove: * Step One: Firmly grab each side of the HAT-TAC™ with both hands. * Step Two: Slowly wiggle the HAT-TAC™ up and down to separate the adhesive back from the wall. Be careful during this step as removing too fast or incorrectly could peel paint. FINAL SALE |
Close
|
Holebrook Brushed Poly Blend Outback Hat |
---|
Dorfman Pacific Company's Holebrook Brushed Poly Blend Outback Hat blends the rugged style of a western with durable modern materials. The teardrop crown, weathered finish and faux leather/cord combo hat band conjure thoughts of wide open spaces and a horse or two, while the medium width, wired shapeable brim is a classic outback detail. Metal grommet eyelets have been added for extra breathability, allowing direct airflow to the crown's interior. Approx. 4 1/8" Teardrop Crown 3" Wired Shapeable Brim Made of: 92% Polyester 8% Nylon Weathered Corduroy Finish Metal Grommet Eyelets - For Ventilation Faux Leather/Cord Combo Hat Band Self-Fabric Binding on Brim Self-Fabric Chin Cord with Adjustable Toggle Self Fabric Sweatband Inseam Taping Plaid Pattern Lining Size(s): M, L, and XL, fits true to size. |
Close
|
Constitution Knit Beanie Hat |
---|
Dorfman Pacific Company debuts the Constitution Knit Beanie Hat for this fall season. The two-tone rib knit body reveals a striped pattern when worn, creating a dynamic backdrop for the US Flag patch. The acrylic, nylon blend yarn is soft and comfortable, and will keep you warm and toasty. Approx. 8 3/4" Height - Flat 8 1/2" Width - Flat 3" Cuff - Flat Made of: 65% Acrylic 35% Nylon 6-Seam Crown USA Flag Front Patch Rib-Knit Body Cuffed Unlined Size(s): One Size Fits Most. Fits up to size 7 3/4 (XXL) comfortably. |
Close
|
Summit Ribknit Radar Cap Beanie Hat |
---|
This historical silhouette is also known as a Jeep Cap, a style that originated during WWII. Dorfman Pacific Company has updated the hybrid design of beanie/ball cap with the Summit Ribknit Radar Cap Beanie Hat. The rib-knit crown hugs your head and keeps you warm. The vegan suede bill/visor helps to shield the sun from your eyes and to reduce any glare from surrounding surfaces. The Summit Ribknit Radar Cap is not only practical, but fashionable too. Approx. 7 1/2" Height - Flat 2" Pre-Curved Bill/Visor Made of: 65% Acrylic 35% Wool 6-Seam Crown Rib-Knit Body Vegan Suede Bill/Visor Cuffed Rubberized Logo Unlined Size(s): One Size Fits Most. Fits up to size 7 3/4 (XXL) comfortably. |
Close
|
Bowline Ponytail Swimwear Fitted Baseball Cap |
---|
Dorfman Pacific Company's the Bowline Ponytail Swimwear Fitted Baseball Cap is perfect for anyone looking to keep their hair up and off their face. Features a ponytail opening at the top of the crown. This is a fitted baseball cap and a swimwear item with a soft lining and elastic sweatband. Approx. 4" Crown 3" Pre-Curved Brim Made of: 100% Polyester Ponytail Opening - Top of Crown Soft, Breathable Lining Elastic Sweatband Size(s): One Size Fits Most - Fits up to 7 3/8 (L) comfortably. |
Close
|
Birch Removable Face Shield Trooper Cap |
---|
Dorfman Pacific Company's Birch Removable Face Shield Trooper Cap is for when you need extra weather protection. For when the temperature gets frigid, this trooper features a removable face shield, vegan fur-lined earflaps, as well as hook and loop-attachable chinstrap. The interior of the cap is also lined with vegan fur. Stay warm with the Birch Removable Face Shield Trooper Cap by Dorfman Pacific Company! Approx. 11" Top to Bottom, Flat (Including Earflaps) 14" Front to Back, Flat (Including Chinstrap) Made of: 100% Nylon Flexible Design Removable Face Shield Vegan Fur-Lined Earflaps Vegan Fur-Lined Chinstrap - Secure via Hook and Loop Vegan Fur Lining Size(s): M, L and XL; fits true to size. |
USA: 1-888-VHS-HATS (1-888-847-4287)
INT'L: +1 619-906-4440 Se habla español
Shop for Hats at VillageHatShop.com | Privacy Policy | Website Accessibility | Site Map
Copyright © 1999-2020 Village Hat Shop: The #1 Source for Hats Online
*ALL SPECIAL OFFERS AND DISCOUNTS
Excludes wholesale/B2B, Certain Brand Restrictions, Special Orders or Where Otherwise Noted.
CONTACT USWe are happy to help! |
1 (888) 847-4287Mon-Sun 8am-4:00pm |