Close
|
Brushed Twill MidPro FlexFit Fitted Baseball Cap |
---|
The traditional 6-panel baseball cap has a fused buckram skeleton that forms the rounded athletic crown. Spandex has been woven into the brushed cotton twill baseball cap to allow for maximum stretch and comfort. Each panel has a tonal thread sewn eyelet for ventilation. The inner elasticized sweatband stretches for fit, just like the cap. The fabric color under the bill/visor is a neutral gray. Each FLEXFIT baseball cap has the permacurv® bill/visor, so all the customizing work has been done and all you have to do is simply wear the cap! Approx. 3 1/2" Crown 2 3/4" Bill/Visor Made of: 98% Cotton 2% Spandex 6-Panel Design Buckram-Supported Front Panels (2) Top Button Sewn Eyelets Closed Back - Stretches to Fit Gray Undervisor Elastic Sweatband Unlined Sizes: S/M fits sizes 6 3/4 (XS) - 7 1/8 (M); L/XL fits sizes 7 1/4 (L) - 7 5/8 (XL). For Bulk/Wholesale Purchase of this hat CLICK HERE or call us at 1-888-847-4287. |
Close
|
3-Pleat Cotton Puggaree Hat Band |
---|
A new hat band can do wonders to freshen up any old hat, may we suggest the 3-Pleat Cotton Puggaree Hat Band by Capas Headwear. Featuring a multitude of great colors, this pug hat band is made of 100% cotton. Need to dress your hat up in something new? Look no further than the 3-Pleat Cotton Puggaree Hat Band - a fresh new look to your favorite hat! For best results, please follow all instructions for use (below). *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. Approx. 28" Total Length, End to End 1 7/8" Width Made of: 100% Cotton 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! |
Close
|
Combed Twill MidPro FlexFit Fitted Baseball Cap |
---|
The traditional 6 panel baseball cap has a fused buckram skeleton that forms the rounded athletic crown. Spandex has been woven into the cotton twill baseball cap to allow for maximum stretch and comfort. Each panel has a tonal thread sewn eyelet for ventilation. The inner elasticized sweatband stretches for fit, just like the cap. The fabric color under the bill/visor is a neutral gray. Each FLEXFIT caseball cap has the permacurv® bill/visor, so all the customizing work has been done and all you have to do is simply wear the cap! Approx. 3 1/2" Crown 2 3/4" Bill/Visor Made of: 63% Polyester 34% Cotton 3% Spandex 6-Panel Design Buckram-Supported Front Panels (2) Top Button Sewn Eyelets Closed Back - Stretches to Fit Gray Undervisor Elastic Sweatband Unlined Sizes: S/M fits sizes 6 3/4 (XS) - 7 1/4 (L); L/XL fits sizes 7 1/8 (M) - 7 5/8 (XL). |
Close
|
3-Pleat Satin Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a multitude of great colors, the 3-Pleat Satin Puggaree Hat Band will give a fresh new look to your favorite hat. For best results, please follow all instructions for use (below). Approx. 28" Total Length, End to End 2" Width Made of: 100% Satin 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
TWS1 All Weather Hat - Blue |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection You're ready for any adventure with the TWS1 All Weather Hat from Tilley! This outdoor hat is perfect for any trek, in or out of water. The TWS1 All Weather Hat is ready keep you comfortable with the Schoeller 3x dry fabric C-Change membrane to control temperature when out in the sun, wind, and rain. The best part? It's also very comfortable! Approx. 3 1/4" Crown 2 3/4" Front/Back Brim 2 3/8" Side Brim Made of: 73% Polyester Schoeller® Technologies ecorepel® 27% Polyurethane Schoeller® Technologies ecorepel® Features: * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Underbrim reduces glare from most surfaces. * Wind stability through an extra stiff front brim & plastic wiring around the whole brim. * Keep it on in windy conditions through the wind cord & size cinch system. * Reflective yarns in the wind cords to increase visibility at dusk & dawn. * Secure your Hat while portaging with rear brim loop for clip - loop also holds wind cords when not in use. * Temperature is regulated with Schoeller® Fabric c_change® membrane. * Ventilation through a back vent & side grommets. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Lightweight, weighs 3.2 oz/91 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) finish. * Snap up sides for added wind stability & for added style. * Machine wash cool water, delicate cycle or hand wash; Reshape & air-dry. Sizes: 7 (M) - 7 7/8 (XXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
Cool and Dry Pique Mesh Fitted Baseball Cap |
---|
Want a comfortable, lightweight cap, the Flexfit® Cool and Dry Pique Mesh Fitted Baseball Cap is just the ticket thanks to the pique weave fabric. Cool and dry technology are sweat and moisture-wicking will keep you dry and refreshed on your next workout. A silver undervisor on the permacurv® bill/visor and inner elasticized sweatband that stretches to fit make this cap a simple wear! Approx. 4" Crown 2 3/4" Bill/Visor Made of: 99% Polyester 1% P.U. Spandex 6-Panel Design Buckram-Supported Front Panels (2) Top Button Sewn Eyelets Closed Back - Stretches to Fit Gray Undervisor Elastic Sweatband Unlined Size(s): One Size Fits Most; Fits sizes 6 7/8 (S) - 7 1/2 (XL) comfortably. |
Close
|
Authentique Classic Wool Beret |
---|
Please Note: Laulhere have recently rebranded their items, some pieces will have a satin lining while others will have a cotton lining, linings cannot be selected. Made in France Based in Oloron-Sainte-Marie at the foothills of the Pyrenees, Héritage par Laulhère has withstood the test of time and remains the very last producer of the beret in the region. Since 1840, Héritage par Laulhère's design studio and workshops have remained in their original locations and continue to uphold tradition, quality, culture and heritage above all else. To Héritage par Laulhère, the words "Made in France" remain a proud statement and a promise of the highest quality. The Authentique Classic Wool Beret by Héritage par Laulhère is our newest addition to their line of classic, authentic and traditionally-crafted berets. A simple design; the Authentique is crafted of water-resistant merino wool and features a classic top tassel, sewn inner label, and Héritage par Laulhère side pin. Ideal for men or women, the Authentique is available in a medley of colors for a stylish finish to all your looks! Approx. 11" Diameter Made of: 100% Merino Wool Made in France Merino Wool Water Resistant Héritage par Laulhère Side Pin Cabillou - Center Top Tassel Héritage par Laulhère Label Lined Packable & Crushable Size: One Size Fits Most - Fits sizes 6 3/4 (XS) - 7 1/4 (L) comfortably. |
USA: 1-888-VHS-HATS (1-888-847-4287)
INT'L: +1 619-906-4440 Se habla español
Shop for Hats at VillageHatShop.com | Privacy Policy | Website Accessibility | Site Map
Copyright © 1999-2020 Village Hat Shop: The #1 Source for Hats Online
*ALL SPECIAL OFFERS AND DISCOUNTS
Excludes wholesale/B2B, Certain Brand Restrictions, Special Orders or Where Otherwise Noted.
CONTACT USWe are happy to help! |
1 (888) 847-4287Mon-Sun 8am-4:00pm |