Close
|
Kap Strap Wind Cord |
---|
How frustrating is it when your cap flies off? With the Original Kap Strap your ride on the rollercoaster, motorcycle, boat, or just on a windy day is worry free. The Kap Strap is a braided fabric cord with two secure clamps on either end; attach one to your cap and the other to your shirt's collar. Never fear windy days while wearing a cap again! Approx. 12 1/4" Length, End to End (1) Braided Fabric Strap w/ Clip at Each End Size: One Size Fits Most - Attach one end to cap and other to your shirt collar. Prevents cap from flying away. |
Close
|
Golf Ball Hat-Tac |
---|
FINAL SALE Made in the USA Never again worry about your hats becoming misshapen, sagging, or losing their curve, thanks to the Golf Ball Hat-Tac. This revolutionary invention sticks to any surface thanks to the 3M foam adhesive backing, and the fixed curve platform allows hats to comfortably rest in an upright position. With this patented and trademarked design, your ball cap, fedora, or any other piece of headwear will never lose its curve. This is the perfect place to hang your hat! Approx. 45.5 mm High 97 mm Wide 50 mm Deep Made in the USA 3M Foam Adhesive Backing Fixed Curve Platform Golf Ball and Putting Green Print Sturdy and Reliable Works for Hats of All Sizes Manufacturer Instructions for How to Apply: * Prep surface: Take a soft wash cloth with Isopropyl or similar alcohol cleaner to create a nice clean surface for the HAT-TAC™ to stick onto. Our recommendation is to find a smooth clean surface with little texture. * After prepping the surface: Grab the tab sticking out and peel away the red backing with ease. HAT-TAC™ attaches to the wall using a foam medium hold double sided adhesive. * Position: Align your HAT-TAC™ a few centimeters off the wall, making sure to the top so is perfectly level. * Last step: Push softly, just enough to hold the HAT-TAC™ in place on the surface. Take a few steps back to make sure it is exactly where you want it positioned. If the positioning is perfect, push and hold the back side of the HAT-TAC™ to the wall firmly for 30 seconds then wait 30 minutes before hanging a hat. Manufacturer Instructions for How to Remove: * Step One: Firmly grab each side of the HAT-TAC™ with both hands. * Step Two: Slowly wiggle the HAT-TAC™ up and down to separate the adhesive back from the wall. Be careful during this step as removing too fast or incorrectly could peel paint. FINAL SALE |
Close
|
Solid Cotton Bandana |
---|
FINAL SALE The bandana has been worn by almost everyone at some point in time. This simple piece of fabric can change a person's look in 10 seconds! This 21 1/2" x 21 1/2" square is great as a handkerchief, bandana, face mask, or scarf. Approx. 21 1/2" L x 21 1/2" W Made of: 100% Cotton Solid Bandana Square Size: One Size Fits Most FINAL SALE |
Close
|
Army Snapback Baseball Cap |
---|
A 6-panel cotton ball cap, complete with eyelets for ventilation. Casual and well constructed with an adjustable hook and loop strap, ARMY is embroidered in gold on the front two panels of this army green ball cap. Approx. 2 5/8" Bill/Visor Made of: 100% Cotton Cotton Sweatband Adjustable Hook and Loop Strap Sewn Ventilation Eyelets Size: Adjustable - Fits up to size 7 3/8 (L) comfortably. For Bulk/Wholesale purchase of this hat, CLICK HERE or call us at 1-888-847-4287. |
Close
|
Hat Cleaning Sponge |
---|
Made in the USA The Village Hat Shop Hat Cleaning Sponge is the serious hatter's tool of choice when cleaning surface spots on hats. Easily wipes away dirt, dust and grime. It is always used dry and cleans without chemicals. Like a pencil eraser, one carefully rubs the surface spot until it "balls up" and can be brushed away. Can be used on all shades of hats - for best results, use a separate sponge for each different color of hat. For best results, please follow all manufacturer instructions for use (below). Approx. 3 3/4" Length 2 1/8" Width Made of: 100% All Natural Latex Rubber Size: (1) Sponge Manufacturer Instructions for Use: * Always use dry. * Locate the soiled area and gently rub the sponge upon the spot. Any debris can be brushed into a trash receptacle. * When the surface of the sponge becomes clogged with dirt/grime, simply remove a layer by shaving with a razor blade or cutting off the section with a pair of scissors; or replace with a new sponge. * Do not wring out the sponge with water or clean it with any chemicals/cleansers. |
USA: 1-888-VHS-HATS (1-888-847-4287)
INT'L: +1 619-906-4440 Se habla español
Shop for Hats at VillageHatShop.com | Privacy Policy | Website Accessibility | Site Map
Copyright © 1999-2020 Village Hat Shop: The #1 Source for Hats Online
*ALL SPECIAL OFFERS AND DISCOUNTS
Excludes wholesale/B2B, Certain Brand Restrictions, Special Orders or Where Otherwise Noted.
CONTACT USWe are happy to help! |
1 (888) 847-4287Mon-Sun 8am-4:00pm |