Close
|
3-Pleat Cotton Puggaree Hat Band |
---|
A new hat band can do wonders to freshen up any old hat, may we suggest the 3-Pleat Cotton Puggaree Hat Band by Capas Headwear. Featuring a multitude of great colors, this pug hat band is made of 100% cotton. Need to dress your hat up in something new? Look no further than the 3-Pleat Cotton Puggaree Hat Band - a fresh new look to your favorite hat! For best results, please follow all instructions for use (below). *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. Approx. 28" Total Length, End to End 1 7/8" Width Made of: 100% Cotton 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! |
Close
|
3-Pleat Satin Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a multitude of great colors, the 3-Pleat Satin Puggaree Hat Band will give a fresh new look to your favorite hat. For best results, please follow all instructions for use (below). Approx. 28" Total Length, End to End 2" Width Made of: 100% Satin 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Paisley 3-Pleat Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a classic paisley print in varying colors, the Paisley 3-Pleat Puggaree Hat Band by Capas Headwear will give a colorful new twist to your favorite hat. For best results, please follow all instructions for use (below). Approx. 29" Total Length, End to End 1 7/8" Width Made of: 100% Polyester 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Cheltenham Wool Twill Newsboy Cap |
---|
Please Note: Sizing for this style runs one size large. We suggest sizing down when purchasing or call us at 1-888-847-4287 for help. Simple and effective, don't let Baskerville Hat Company's Cheltenham Wool Twill Newsboy Cap fool you. Made of 100% Japanese wool, this is a twill cap that can easily be paired with any outfit. The bill has a double snap feature and the interior boasts a sleek lining along with a grosgrain ribbon sweatband. Approx. 9 3/4" Front to Back, Flat 9" Side to Side, Flat 1 5/8" Double Snap Bill Made of: 100% Japanese Wool Solid Wool Twill Classic Newsboy Design - 8 Panel Top Button Grosgrain Ribbon Sweatband Sleek Lining Size(s): S, M, L, XL, and XXL; runs large. See sizing disclaimer above. For Bulk/Wholesale Purchase of this hat, CLICK HERE or call us at 1-888-847-4287. |
Close
|
Golf Ball Hat-Tac |
---|
FINAL SALE Made in the USA Never again worry about your hats becoming misshapen, sagging, or losing their curve, thanks to the Golf Ball Hat-Tac. This revolutionary invention sticks to any surface thanks to the 3M foam adhesive backing, and the fixed curve platform allows hats to comfortably rest in an upright position. With this patented and trademarked design, your ball cap, fedora, or any other piece of headwear will never lose its curve. This is the perfect place to hang your hat! Approx. 45.5 mm High 97 mm Wide 50 mm Deep Made in the USA 3M Foam Adhesive Backing Fixed Curve Platform Golf Ball and Putting Green Print Sturdy and Reliable Works for Hats of All Sizes Manufacturer Instructions for How to Apply: * Prep surface: Take a soft wash cloth with Isopropyl or similar alcohol cleaner to create a nice clean surface for the HAT-TAC™ to stick onto. Our recommendation is to find a smooth clean surface with little texture. * After prepping the surface: Grab the tab sticking out and peel away the red backing with ease. HAT-TAC™ attaches to the wall using a foam medium hold double sided adhesive. * Position: Align your HAT-TAC™ a few centimeters off the wall, making sure to the top so is perfectly level. * Last step: Push softly, just enough to hold the HAT-TAC™ in place on the surface. Take a few steps back to make sure it is exactly where you want it positioned. If the positioning is perfect, push and hold the back side of the HAT-TAC™ to the wall firmly for 30 seconds then wait 30 minutes before hanging a hat. Manufacturer Instructions for How to Remove: * Step One: Firmly grab each side of the HAT-TAC™ with both hands. * Step Two: Slowly wiggle the HAT-TAC™ up and down to separate the adhesive back from the wall. Be careful during this step as removing too fast or incorrectly could peel paint. FINAL SALE |
Close
|
Cotton Beanie Hat |
---|
Handmade in the USA Did you know 40% of the body heat you lose, escapes through the top of your head?!?! Cover it with a Slumbercap Cotton Beanie Hat to warm your nights and brighten your days. The Slumbercap Cotton Beanie Hat is ideal for cold weather climates, joggers, campers, bikers while still being soft enough for chemotherapy patients and those affected by baldness. Slumbercap can be worn under a hat or with a scarf tied around it to frame the face with color. The Slumbercap is: * Soft and warm without being hot. * Snug and secure without being tight. * Comfortable enough to sleep in. * Attractive enough to be seen in. Approx. 6" Height, Flat 9 1/2" Width, Flat 1 3/4" Cuff Made of: 96% Cotton 4% Lycra Handmade in the USA Circle Top Crown Unlined for Maximum Breathability Machine Wash Warm Air Dry or Tumble Dry Size: One Size Fits Most - Stretches to fit up to 7 3/8 (L) comfortably. |
Close
|
Kensington Wool Twill Ivy Cap |
---|
Please Note: Sizing for this style runs one size large. We suggest sizing down when purchasing or call us at 1-888-847-4287 for help. Simple and effective, don't let Baskerville Hat Company's Kensington Wool Twill Ivy Cap fool you. Made of 100% Japanese wool, this is a staple cap that can easily be paired with any outfit. The bill is sewn and the interior boasts a sleek lining along with a grosgrain ribbon sweatband. Approx. 9 1/2" Front to Back, Flat 9 1/2" Side to Side, Flat 2" Sewn Bill Made of: 100% Japanese Wool Solid Wool Twill Classic Ivy Design Grosgrain Ribbon Sweatband Sleek Lining Size(s): S, M, L, XL, and XXL; runs large. See sizing disclaimer above. For Bulk/Wholesale Purchase of this hat, CLICK HERE or call us at 1-888-847-4287. |
Close
|
Spear Point Wool Felt Rancher Fedora Hat |
---|
Made in Mexico Presenting the Spear Point Wool Felt Rancher Fedora Hat from Charlie 1 Horse. With its raw edge brim and an eye-catching arrowhead crown detail, this hat harmoniously combines a classic look with contemporary style. The distressed fabric band and faux snakeskin band overlay offers a Southwestern flair suitable for any occasion. Approx: 4 1/4" Long Oval Arrowhead Crown 4" Flat Brim Made of: 100% Wool Felt Made In Mexico Firm/Stiff Body Tonal Distressed Fabric Hat Band Faux Snakeskin Band Overlay Metal Buckle with Faux Turquoise Metal Arrow with Faux Turquoise Accent Charlie 1 Horse Branding Raw Edge Brim DRI-LEX® Absorbent Sweatband Unlined Size(s): S, M, L, and XL; fits true to size. |
Close
|
Trio Pheasant Feather Wool Felt Fedora Hat - Made to Order |
---|
MADE TO ORDER. This Item Takes 5 to 7 business days to make before it will ship. Made in the USA Try something flashy with the Trio Pheasant Feather Wool Felt Fedora Hat from Kathy Jeanne! This chic and stylish fedora is made of beautiful wool felt, which pairs beautifully with the pheasant feather accents on the crown. The grosgrain ribbon sweatband is comfortable, made even better by the adjustable drawstring and the breathable, unlined interior. Approx. 3 1/2" Center Pinch Crown - Front 3 3/4" Center Pinch Crown - Back 4" Floppy Brim - Front 4 1/4" Floppy Brim - Sides 3 1/2" Floppy Brim - Back Made of: 100% Wool Felt Made in the USA Faux Leather Hat Band with Tassels Pheasant Feather Accents Adjustable Drawstring Grosgrain Ribbon Sweatband Unlined Size: One Size Fits Most - Fits up to size 7 1/8 (M) comfortably; adjustable drawstring sweatband for comfortable fit. |
Close
|
Pelham Plaid Wool Ivy Cap |
---|
Please Note: Sizing for this style runs 1/8 of an inch large. Call us at 1-888-847-4287 for help with sizing. One of Baskerville Hat Company's plaid editions this season: the Pelham Plaid Wool Ivy Cap. Made of 100% Italian wool featuring a thinner thread making for a sleeker and lighter finish. The classic tartan plaid pattern is attractive and will add a little flair to any look. Features a single snap brim, grosgrain ribbon and satin lining. Lighter yet bolder, the Pelham by Baskerville Hat Company. Approx. 9 1/2" Length, Flat 9 1/4" Width, Flat 1 5/8" Single Snap Bill Made of: 100% Italian Wool Lightweight Classic Ivy Design Grosgrain Ribbon Sweatband Satin Lining Size(s): S, M, L, XL and XXL; runs large. Please see sizing disclaimer at top of description. |
Close
|
Double Button Profile Wool Felt Cloche Hat - Made to Order |
---|
Please Note: This item is MADE TO ORDER. This item takes 5 to 7 business days to make before it will ship. Made in the USA Let's return to the classics with this stylish Double Button Profile Wool Felt Cloche Hat by Kathy Jeanne. Made in the USA, it is beautifully designed with a grosgrain hat band and double button detail. The olive color creates a versatile hat that will be perfect for the season! Approx. 5 1/2" Round Crown 2 1/4" Brim - Front 3" Brim - Sides 1 1/2" Brim - Back Made of: 100% Wool Felt Made in the USA Made to Order Grosgrain Ribbon Hat Band with Double Button Accent Adjustable Drawstring Grosgrain Ribbon Sweatband Unlined Size(s): One Size Fits Most - Fits up to size 7 1/8 (M) comfortably; adjustable drawstring sweatband for comfortable fit. |
USA: 1-888-VHS-HATS (1-888-847-4287)
INT'L: +1 619-906-4440 Se habla español
Shop for Hats at VillageHatShop.com | Privacy Policy | Website Accessibility | Site Map
Copyright © 1999-2020 Village Hat Shop: The #1 Source for Hats Online
*ALL SPECIAL OFFERS AND DISCOUNTS
Excludes wholesale/B2B, Certain Brand Restrictions, Special Orders or Where Otherwise Noted.
CONTACT USWe are happy to help! |
1 (888) 847-4287Mon-Sun 8am-4:00pm |