Close
|
Midsize Visor - Solid |
---|
Made in the USA Get the sun out of your eyes in style with the Solid Midsize Visor by No Headache. Featuring their patented No Headache design, the Solid Midsize Visor fits most women and is designed to avoid the headaches usually associated with visors. Approx. 4" Visor/Bill Made of: Plastic Frame Visor & Underside Fabric - 100% Polyester Spandex Microsuede Arm Fabric - 100% Neoprene UPF 50+ Sun Protection No Headache Patented Design Sustainable Recycled Plastic Inner Frame Quick Drying High-Tech Poly/Spandex Microsuede Fabric Black Underside - Reduces Glare Lightweight Size: One Size Fits Most - Fits up to size 7 1/4 (L) comfortably. |
Close
|
Traveler Fur Felt Fedora Safari Hat |
---|
Made in Italy The Borsalino Traveler Fur Felt Fedora Safari Hat is both stylish and functional. Made of 100% brushed fur felt, this fedora is both water repellent and crushable. Easy to travel with, the Traveler Fur Felt Fedora Safari Hat can be packed into your suitcase and be ready to wear at your destination. Approx. 4 1/2" Center Pinch Crown 2 1/2" Downturned Brim Made of: 100% Fur Felt Water Repellent Crushable/Packable Underwelt Brim Leather Hat Band Borsalino Side Pin Polyester Sweatband Unlined Sizes: 55 cm (6 7/8, Small) through 63 cm (7 3/4, XX-Large), fits true to size. |
Close
|
Golf Ball Hat-Tac |
---|
FINAL SALE Made in the USA Never again worry about your hats becoming misshapen, sagging, or losing their curve, thanks to the Golf Ball Hat-Tac. This revolutionary invention sticks to any surface thanks to the 3M foam adhesive backing, and the fixed curve platform allows hats to comfortably rest in an upright position. With this patented and trademarked design, your ball cap, fedora, or any other piece of headwear will never lose its curve. This is the perfect place to hang your hat! Approx. 45.5 mm High 97 mm Wide 50 mm Deep Made in the USA 3M Foam Adhesive Backing Fixed Curve Platform Golf Ball and Putting Green Print Sturdy and Reliable Works for Hats of All Sizes Manufacturer Instructions for How to Apply: * Prep surface: Take a soft wash cloth with Isopropyl or similar alcohol cleaner to create a nice clean surface for the HAT-TAC™ to stick onto. Our recommendation is to find a smooth clean surface with little texture. * After prepping the surface: Grab the tab sticking out and peel away the red backing with ease. HAT-TAC™ attaches to the wall using a foam medium hold double sided adhesive. * Position: Align your HAT-TAC™ a few centimeters off the wall, making sure to the top so is perfectly level. * Last step: Push softly, just enough to hold the HAT-TAC™ in place on the surface. Take a few steps back to make sure it is exactly where you want it positioned. If the positioning is perfect, push and hold the back side of the HAT-TAC™ to the wall firmly for 30 seconds then wait 30 minutes before hanging a hat. Manufacturer Instructions for How to Remove: * Step One: Firmly grab each side of the HAT-TAC™ with both hands. * Step Two: Slowly wiggle the HAT-TAC™ up and down to separate the adhesive back from the wall. Be careful during this step as removing too fast or incorrectly could peel paint. FINAL SALE |
USA: 1-888-VHS-HATS (1-888-847-4287)
INT'L: +1 619-906-4440 Se habla español
Shop for Hats at VillageHatShop.com | Privacy Policy | Website Accessibility | Site Map
Copyright © 1999-2020 Village Hat Shop: The #1 Source for Hats Online
*ALL SPECIAL OFFERS AND DISCOUNTS
Excludes wholesale/B2B, Certain Brand Restrictions, Special Orders or Where Otherwise Noted.
CONTACT USWe are happy to help! |
1 (888) 847-4287Mon-Sun 8am-4:00pm |