Close
|
3-Pleat Cotton Puggaree Hat Band |
---|
A new hat band can do wonders to freshen up any old hat, may we suggest the 3-Pleat Cotton Puggaree Hat Band by Capas Headwear. Featuring a multitude of great colors, this pug hat band is made of 100% cotton. Need to dress your hat up in something new? Look no further than the 3-Pleat Cotton Puggaree Hat Band - a fresh new look to your favorite hat! For best results, please follow all instructions for use (below). *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. Approx. 28" Total Length, End to End 1 7/8" Width Made of: 100% Cotton 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! |
Close
|
3-Pleat Satin Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a multitude of great colors, the 3-Pleat Satin Puggaree Hat Band will give a fresh new look to your favorite hat. For best results, please follow all instructions for use (below). Approx. 28" Total Length, End to End 2" Width Made of: 100% Satin 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Six Panel Canvas Skull Cap Beanie Hat |
---|
Please note: Sizes medium and large run true to size, however extra-large runs a full size small. Made in the USA Made of durable cotton canvas, the Six Panel Canvas Skull Cap Beanie Hat has the classic dome-hugging skull cap look and feel in a hard-wearing and natural material. Featuring their classic six-panel design, this skull cap beanie is finished with a 2-inch cuff and a cotton sweatband. Approx. 4 1/2" Crown 8" Diameter 2" Cuff Made of: 100% Cotton Canvas Made in the USA Six-Panel Design Cotton Sweatband Unlined Packable / Crushable Size(s): M, L and XL. Please see disclaimer in regards to sizing at top. |
Close
|
Paisley 3-Pleat Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a classic paisley print in varying colors, the Paisley 3-Pleat Puggaree Hat Band by Capas Headwear will give a colorful new twist to your favorite hat. For best results, please follow all instructions for use (below). Approx. 29" Total Length, End to End 1 7/8" Width Made of: 100% Polyester 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Daily Knit Beanie Hat |
---|
They call it the Daily Knit Beanie Hat for a reason, it's simple and classic so you can wear it every day! This rib knit acrylic hat features timeless, no frills styling so it looks good no matter what you’re wearing and doesn’t get old after repeated wears. Approx. 8 3/8" Diameter, Flat 9 1/2" Length, Flat Made of: 100% Acrylic Classic Rib Knit Neff Logo Tab Unlined Stretchy & Soft Size: One Size Fits Most - Fits up to size 7 3/4 (XXL) comfortably. |
Close
|
Six Panel Corduroy Skull Cap Beanie Hat |
---|
Made in the USA Made of stylish cotton corduroy, the Six Panel Corduroy Skull Cap Beanie Hat has the classic dome-hugging skull cap look and feel you can wear all year round. Featuring their classic six-panel design, this skull cap beanie is finished with a 2-inch cuff and a cotton sweatband. Approx. 4 1/2" Crown 8" Diameter 2" Cuff Made of: 100% Cotton Corduroy Made in the USA Six-Panel Design Cotton Sweatband Unlined Packable / Crushable Sizes: M, L and XL; fits true to size. |
Close
|
Starburst 3-Pleat Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a great new starburst print in varying colors, the Starburst 3-Pleat Puggaree Hat Band by Capas Headwear will give a colorful new twist to your favorite hat. Approx. 29" Total Length, End to End 1 7/8" Width Made of: 100% Polyester Instructions for Use: * Fasten the unfinished end of the pug band on the lower left side of the crown. * Wrap hatband around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hatband closest to the base of the crown. *Traditionally, men's hatbands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! |
Close
|
Spitfire Suede Leather Newsboy Cap |
---|
Made in the USA New York Hat Company brings back the Spitfire dressed in suede with the Spitfire Suede Leather Newsboy Cap. Made of genuine leather with a suede finish, this cap features a classic 8-panel design, a soft bill and elegant stitching that adds definition and detail. The unlined interior boasts a cushioned sweatband and inseam taping. All you need are some boots to complete a classic fall look! Approx. 9" Length, Flat 9 1/2" Width, Flat 2" Unstructured Bill Made of: 100% Leather (Suede) Made in the USA Packable 8-Panel Design Top Button Padded Cotton Sweatband Inseam Taping Unlined Size(s): S, M, L and XL; fits true to size. |
Close
|
Byron Bay Wool Felt Rancher Hat |
---|
The Byron Bay Wool Felt Rancher Hat is a stunning hat from the San Diego local hat brand, Peter Grimm! Featuring a brilliant and striking design, the Byron has a highly saturated body with a teardrop crown and flat brim. A faux leather band overlaying a grosgrain ribbon band creates the perfect multilayered hat band. The Byron's finishing touch is a raw edge brim, for just a touch of ruggedness. Approx. 4" Teardrop Crown 3 1/2" Flat Brim Made of: 100% Wool Felt Firm Finish Grosgrain Ribbon and Faux Leather Layered Hat Band Peter Grimm Button Peter Grimm Metal Grommet at Back Raw Edge Brim Soft Elasticized Sweatband Satin Lining Size(s): S/M and L/XL; fits true to size. |
USA: 1-888-VHS-HATS (1-888-847-4287)
INT'L: +1 619-906-4440 Se habla español
Shop for Hats at VillageHatShop.com | Privacy Policy | Website Accessibility | Site Map
Copyright © 1999-2020 Village Hat Shop: The #1 Source for Hats Online
*ALL SPECIAL OFFERS AND DISCOUNTS
Excludes wholesale/B2B, Certain Brand Restrictions, Special Orders or Where Otherwise Noted.
CONTACT USWe are happy to help! |
1 (888) 847-4287Mon-Sun 8am-4:00pm |