Close
|
Officially Licensed Timary Crushable ProvatoKnit Safari Fedora Hat |
---|
Officially Licensed Indiana Jones is back with more adventure-worthy headwear: the Officially Licensed Timary Crushable ProvatoKnit Safari Fedora Hat! This fedora features an extra-wide grosgrain ribbon hat band and a cotton twill sweatband. It is made of ProvatoKnit, which is crushable, water resistant, and wrinkle-free, making it the perfect companion on your next epic enterprise. "Jock! Start the engine!" Approx. 4 1/4" Teardrop Crown 3 1/8" Curved Brim - Front 3" Curved Brim - Back and Sides Made of: 100% Polyester Officially Licensed ProvatoKnit™ - Crushable, Wrinkle Free Water Resistant Grosgrain Ribbon Hat Band Indiana Jones™ Side Pin Underwelt Brim Cotton Twill Sweatband Unlined Size(s): M, L and XL - Fits true to size. |
Close
|
Combed Twill MidPro FlexFit Fitted Baseball Cap |
---|
The traditional 6 panel baseball cap has a fused buckram skeleton that forms the rounded athletic crown. Spandex has been woven into the cotton twill baseball cap to allow for maximum stretch and comfort. Each panel has a tonal thread sewn eyelet for ventilation. The inner elasticized sweatband stretches for fit, just like the cap. The fabric color under the bill/visor is a neutral gray. Each FLEXFIT caseball cap has the permacurv® bill/visor, so all the customizing work has been done and all you have to do is simply wear the cap! Approx. 3 1/2" Crown 2 3/4" Bill/Visor Made of: 63% Polyester 34% Cotton 3% Spandex 6-Panel Design Buckram-Supported Front Panels (2) Top Button Sewn Eyelets Closed Back - Stretches to Fit Gray Undervisor Elastic Sweatband Unlined Sizes: S/M fits sizes 6 3/4 (XS) - 7 1/4 (L); L/XL fits sizes 7 1/8 (M) - 7 5/8 (XL). |
Close
|
TY Cotton Twill MidPro FlexFit Fitted Baseball Cap |
---|
The traditional 6 panel baseball cap has a fused buckram skeleton that forms the rounded athletic crown. Complete with spandex woven into the cotton twill baseball cap, the FlexFit Mid-Pro Baseball Cap is extremely comfortable with a little stretch. Limited supply at this price. Don't be last to the party, get the FlexFit Mid-Pro Cotton Twill Baseball Cap while supplies lasts! Approx. 3 1/2" Crown 2 3/4" Bill/Visor Made of: 98% Cotton 2% Spandex 6-Panel Construction Sewn Eyelets for Ventilation Elasticized Sweatband Closed Back - Stretches to Fit Gray Undervisor Unlined Size: L/XL fits sizes 7 1/4 (L) - 7 5/8 (XL). For Bulk/Wholesale purchase of this hat, CLICK HERE or call us at 1-888-847-4287. |
Close
|
Golf Ball Hat-Tac |
---|
FINAL SALE Made in the USA Never again worry about your hats becoming misshapen, sagging, or losing their curve, thanks to the Golf Ball Hat-Tac. This revolutionary invention sticks to any surface thanks to the 3M foam adhesive backing, and the fixed curve platform allows hats to comfortably rest in an upright position. With this patented and trademarked design, your ball cap, fedora, or any other piece of headwear will never lose its curve. This is the perfect place to hang your hat! Approx. 45.5 mm High 97 mm Wide 50 mm Deep Made in the USA 3M Foam Adhesive Backing Fixed Curve Platform Golf Ball and Putting Green Print Sturdy and Reliable Works for Hats of All Sizes Manufacturer Instructions for How to Apply: * Prep surface: Take a soft wash cloth with Isopropyl or similar alcohol cleaner to create a nice clean surface for the HAT-TAC™ to stick onto. Our recommendation is to find a smooth clean surface with little texture. * After prepping the surface: Grab the tab sticking out and peel away the red backing with ease. HAT-TAC™ attaches to the wall using a foam medium hold double sided adhesive. * Position: Align your HAT-TAC™ a few centimeters off the wall, making sure to the top so is perfectly level. * Last step: Push softly, just enough to hold the HAT-TAC™ in place on the surface. Take a few steps back to make sure it is exactly where you want it positioned. If the positioning is perfect, push and hold the back side of the HAT-TAC™ to the wall firmly for 30 seconds then wait 30 minutes before hanging a hat. Manufacturer Instructions for How to Remove: * Step One: Firmly grab each side of the HAT-TAC™ with both hands. * Step Two: Slowly wiggle the HAT-TAC™ up and down to separate the adhesive back from the wall. Be careful during this step as removing too fast or incorrectly could peel paint. FINAL SALE |
Close
|
Loteria La Bandera Mesh Trucker Snapback Baseball Cap |
---|
Larry Mahan Hats presents the iconic Mexican Lotería game in hat form! The Loteria La Bandera Mesh Trucker Snapback Baseball Cap features the famous "La Bandera" ("The Flag") card in embroidered patch form across its buckram-supported front panel. Its classic mesh trucker snapback design makes this cap both comfortable AND fun to wear. Approx. 5" Crown 2 1/2" Pre-Curved Bill Made of: 60% Cotton 40% Polyester Classic 5-Panel Crown Top Button Buckram-Supported Front Panel (1) Breathable Mesh Back Panels (4) Printed and Embroidered Front Patch Larry Mahan Hat Label on Side Elasticized Sweatband Unlined Size(s): Adjustable - Adjusts via plastic snapback strap to fit up to size 7 3/4 (XXL) comfortably. |
USA: 1-888-VHS-HATS (1-888-847-4287)
INT'L: +1 619-906-4440 Se habla español
Shop for Hats at VillageHatShop.com | Privacy Policy | Website Accessibility | Site Map
Copyright © 1999-2020 Village Hat Shop: The #1 Source for Hats Online
*ALL SPECIAL OFFERS AND DISCOUNTS
Excludes wholesale/B2B, Certain Brand Restrictions, Special Orders or Where Otherwise Noted.
CONTACT USWe are happy to help! |
1 (888) 847-4287Mon-Sun 8am-4:00pm |