Close
|
Italian Straw Skimmer Hat |
---|
Made in Italy Although superseded by the Panama hat in this century, the Skimmer was for many decades the man's straw hat of choice. The Italian Skimmer by Capas is Made in Italy from 4-ply Koberg straw. This is an authentic, high quality Skimmer hat often assiciated with barber shop quartets, jazz bands, and the like. (Also known as a Boater or Sailor). Approx. 3 1/2" Flat Top Crown 2 1/4" Flat Brim Made of: 100% 4-Ply Koberg Straw Striped Hat Band with Side Bow Firm/Stiff Body Leather Sweatband Lined Sizes: Fitted - Sizes 6 7/8 (S) to 7 3/4 (XXL); fits true to size. |
Close
|
3-Pleat Cotton Puggaree Hat Band |
---|
A new hat band can do wonders to freshen up any old hat, may we suggest the 3-Pleat Cotton Puggaree Hat Band by Capas Headwear. Featuring a multitude of great colors, this pug hat band is made of 100% cotton. Need to dress your hat up in something new? Look no further than the 3-Pleat Cotton Puggaree Hat Band - a fresh new look to your favorite hat! For best results, please follow all instructions for use (below). *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. Approx. 28" Total Length, End to End 1 7/8" Width Made of: 100% Cotton 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! |
Close
|
Cotton Greek Fisherman's Cap |
---|
Made in Greece The Aegean Greek Fisherman Cap is perhaps the most popular hat, year-in-and-year-out, in the Western world. This all cotton cap is fully lined and a big favorite with professional seamen. Rugged and practical enough to handle all kinds of weather, the "Greek" is also a hopeless romantic. Approx. 2" Bill/Visor Made of: 100% Cotton Braided Cord Hat Band Decorative Bill Accent Composite Leather Sweatband (Composite = Recycled Leather Off-cuts, Trimmings, and Shavings) Satin Lined - Lining colors may vary. Sizes: 6 3/4 (S) through 8 (XXXL); fits true to size. |
Close
|
Officially Licensed Timary Crushable ProvatoKnit Safari Fedora Hat |
---|
Officially Licensed Indiana Jones is back with more adventure-worthy headwear: the Officially Licensed Timary Crushable ProvatoKnit Safari Fedora Hat! This fedora features an extra-wide grosgrain ribbon hat band and a cotton twill sweatband. It is made of ProvatoKnit, which is crushable, water resistant, and wrinkle-free, making it the perfect companion on your next epic enterprise. "Jock! Start the engine!" Approx. 4 1/4" Teardrop Crown 3 1/8" Curved Brim - Front 3" Curved Brim - Back and Sides Made of: 100% Polyester Officially Licensed ProvatoKnit™ - Crushable, Wrinkle Free Water Resistant Grosgrain Ribbon Hat Band Indiana Jones™ Side Pin Underwelt Brim Cotton Twill Sweatband Unlined Size(s): M, L and XL - Fits true to size. |
Close
|
3-Pleat Satin Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a multitude of great colors, the 3-Pleat Satin Puggaree Hat Band will give a fresh new look to your favorite hat. For best results, please follow all instructions for use (below). Approx. 28" Total Length, End to End 2" Width Made of: 100% Satin 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Paisley 3-Pleat Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a classic paisley print in varying colors, the Paisley 3-Pleat Puggaree Hat Band by Capas Headwear will give a colorful new twist to your favorite hat. For best results, please follow all instructions for use (below). Approx. 29" Total Length, End to End 1 7/8" Width Made of: 100% Polyester 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Officially Licensed Cotton Safari Fedora Hat |
---|
Officially Licensed Please Note: Sizes run large. We recommend your order 1 size down from your original hat size. This is an official licensed Indiana Jones Cotton Safari Fedora Hat which can be worn year round. It is crafted of 100% cotton twill and is ideal for warm spring and summer days when wool or fur felt hats are just too hot. Approx. 4" Center Pinch Crown 2 3/4" Downturned Brim Made of: 100% Cotton Officially Licensed Grosgrain Ribbon Hat Band with Bow Indiana Jones™ Logo Side Pin Cotton Sweatband Indiana Jones Logo Crown Tip Sizes: S, M, L and XL. See size disclaimer at top of description. |
Close
|
Kids' Wool Felt C-Crown Trilby Fedora Hat |
---|
Whether you need it for a Halloween costume or a school play, or maybe your little one wants to start a trend. The wool felt C-Crown Stingy Brim Fedora is a scaled down version of a classic shape. Approx. 3 1/2" C-Crown (Teardrop) 1 1/4" Overwelt Stingy Brim Made of: 100% Wool Felt 1" Wide Grosgrain Ribbon Hat Band Vinyl sweatband Unlined Sizes: Child's S, M, L, and XL. Suggested for: Kids 2-10 Years Old (see chart below): Age Inches CMS Hat Size Size 1 - 2 years 18 7/8 48 6 Small 2 - 4 years 19 5/8 50 6 1/4 Medium 5 - 7 years 20 3/8 52 6 1/2 Large 8 - 10 years 21 1/8 54 6 3/4 X-Large |
Close
|
Wool Greek Fisherman's Cap |
---|
Made in Greece This is an authentic Greek Fisherman's Cap - Made in Greece - beware of knockoffs. Perhaps the most popular hat year in and year out in the Western world, the Wool Greek Fisherman's Cap is fully lined and a big favorite with professional seamen. Rugged and practical enough to handle all kinds of weather, the "Greek" is also a hopeless romantic. Approx. 2" Bill/Visor Made of: 85% Wool 15% Nylon Braided Cord Hat Band Decorative Bill Accent Composite Leather Sweatband (Composite = Made from recycled leather off-cuts, trimmings, and shavings) Satin Lined Size: 6 7/8 (S) to 8 (XXXL); fits true to size. This hat is non-washable! Dry clean only where available. |
Close
|
Seagrass Straw Ascot Cap |
---|
Please Note: This style runs large, see sizing details below or call us at 1-888-847-4287 for help with sizing. S = 7 M = 7 1/4 L = 7 1/2 XL = 7 3/4 Incredibly breathable and lightweight, the Seagrass Straw Ascot Cap by Capas Headwear is unique among straw caps. Featuring an open weave twisted seagrass straw body, this ascot provides shading from the sun while maximizing ventilation. Natural seagrass possesses wonderful color variation that gives the cap a uniquely organic and relaxed look. Approx. 10" Length 8" Width 2" Brim/Bill (Measured from size M) Made of: 100% Seagrass Straw Open Weave Twisted Seagrass Straw Body Cotton Sweatband Unlined Sizes: S, M, L and XL. Sizing runs large, see sizing disclaimer at top of description. |
Close
|
Starburst 3-Pleat Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a great new starburst print in varying colors, the Starburst 3-Pleat Puggaree Hat Band by Capas Headwear will give a colorful new twist to your favorite hat. Approx. 29" Total Length, End to End 1 7/8" Width Made of: 100% Polyester Instructions for Use: * Fasten the unfinished end of the pug band on the lower left side of the crown. * Wrap hatband around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hatband closest to the base of the crown. *Traditionally, men's hatbands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! |
Close
|
Polka Dot 3-Pleat Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring classic white polka dots against black, brown or navy, the Polka Dot 3-Pleat Puggaree Hat Band by Capas Headwear will add a fresh new twist to your favorite hat. For best results, please follow all instructions for use (below). Approx. 26 1/2" Total Length, End to End 1 7/8" Width Made of: 100% Cotton 3-Pleat Puggaree Hat Band Cotton Twill Fabric Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
USA: 1-888-VHS-HATS (1-888-847-4287)
INT'L: +1 619-906-4440 Se habla español
Shop for Hats at VillageHatShop.com | Privacy Policy | Website Accessibility | Site Map
Copyright © 1999-2020 Village Hat Shop: The #1 Source for Hats Online
*ALL SPECIAL OFFERS AND DISCOUNTS
Excludes wholesale/B2B, Certain Brand Restrictions, Special Orders or Where Otherwise Noted.
CONTACT USWe are happy to help! |
1 (888) 847-4287Mon-Sun 8am-4:00pm |