Close
|
French Pith Helmet |
---|
Please Note: Due to the handmade nature of Pith Helmets, be advised there might be minor imperfections in the construction of the hat. These imperfections do not hinder the look or wear of the helmet. Made in Vietnam This French style pith helmet is the original design from Vietnam. A hundred years ago, the French discovered the advantages of the material used to make these hats. The pith is from trees in northern Vietnam and has properties that make it both a good sun and rain shield. These helmets are handmade in Vietnam using the techniques inherited by the former French occupiers. Please Note: Pith helmets can be immersed in water, whereby the wearer stays cool during use on hot summer days. Please submerge the outside of the helmet carefully, without allowing water to spill into the interior of the helmet. Approx. 4 1/2" Crown 2 3/4" Front and Back Brim 2 1/2" Side Brims Made of: 100% Genuine Pith Handmade Cotton Twill Exterior Composite Leather Decorative Strap Size Adjustable Inner Harness Cotton Poplin Lining Lightweight Dunk in Water to Keep Cool Sizes: S/M fits sizes 6 7/8 (S) to 7 1/4 (L); L/XL* fits sizes 7 1/4 (L) to 7 1/2 (XL); adjusts via a hook and loop ending to the interior sweatband. *Size L/XL was previously sold as the "Big Head" version of this style prior to consolidation. For Bulk/ Wholesale Purchase of this hat, CLICK HERE or call us at 1-888-847-4287. |
Close
|
Wool Military Beret with Lambskin Band |
---|
Made in Canada The Wool Military Beret with Lambskin Band is proudly made in North America by the same manufacturer who supplies berets for the American military (Green Berets) as well as for the Royal Air Force of Great Britain. Berets have been a part of the military uniform since the 19th century and are still seen on troops throughout the world today. There are two unique design elements on this beret: * The semi-circle cardboard insert. This enables the wearer to create a sharp angle on the beret, as well as the spot to display your badge, emblem, or pin. * The leather binding (edge) encases a nylon web band that ends in a bow, this is used to adjust the size of the beret. Approx. 9 1/2" Diameter, Flat 3" Half-Moon Insert - Front Made of: 100% Wool Made in Canada Seamless Wool Beret Semi-circle Insert at Front Lambskin Leather Binding Adjustable Nylon Web Band Unlined Sizes: 6 3/4 (54cm, S) - 8 (64cm, XXXL); fits true to size. |
Close
|
Golf Ball Hat-Tac |
---|
FINAL SALE Made in the USA Never again worry about your hats becoming misshapen, sagging, or losing their curve, thanks to the Golf Ball Hat-Tac. This revolutionary invention sticks to any surface thanks to the 3M foam adhesive backing, and the fixed curve platform allows hats to comfortably rest in an upright position. With this patented and trademarked design, your ball cap, fedora, or any other piece of headwear will never lose its curve. This is the perfect place to hang your hat! Approx. 45.5 mm High 97 mm Wide 50 mm Deep Made in the USA 3M Foam Adhesive Backing Fixed Curve Platform Golf Ball and Putting Green Print Sturdy and Reliable Works for Hats of All Sizes Manufacturer Instructions for How to Apply: * Prep surface: Take a soft wash cloth with Isopropyl or similar alcohol cleaner to create a nice clean surface for the HAT-TAC™ to stick onto. Our recommendation is to find a smooth clean surface with little texture. * After prepping the surface: Grab the tab sticking out and peel away the red backing with ease. HAT-TAC™ attaches to the wall using a foam medium hold double sided adhesive. * Position: Align your HAT-TAC™ a few centimeters off the wall, making sure to the top so is perfectly level. * Last step: Push softly, just enough to hold the HAT-TAC™ in place on the surface. Take a few steps back to make sure it is exactly where you want it positioned. If the positioning is perfect, push and hold the back side of the HAT-TAC™ to the wall firmly for 30 seconds then wait 30 minutes before hanging a hat. Manufacturer Instructions for How to Remove: * Step One: Firmly grab each side of the HAT-TAC™ with both hands. * Step Two: Slowly wiggle the HAT-TAC™ up and down to separate the adhesive back from the wall. Be careful during this step as removing too fast or incorrectly could peel paint. FINAL SALE |
Close
|
Army Snapback Baseball Cap |
---|
A 6-panel cotton ball cap, complete with eyelets for ventilation. Casual and well constructed with an adjustable hook and loop strap, ARMY is embroidered in gold on the front two panels of this army green ball cap. Approx. 2 5/8" Bill/Visor Made of: 100% Cotton Cotton Sweatband Adjustable Hook and Loop Strap Sewn Ventilation Eyelets Size: Adjustable - Fits up to size 7 3/8 (L) comfortably. For Bulk/Wholesale purchase of this hat, CLICK HERE or call us at 1-888-847-4287. |
USA: 1-888-VHS-HATS (1-888-847-4287)
INT'L: +1 619-906-4440 Se habla español
Shop for Hats at VillageHatShop.com | Privacy Policy | Website Accessibility | Site Map
Copyright © 1999-2020 Village Hat Shop: The #1 Source for Hats Online
*ALL SPECIAL OFFERS AND DISCOUNTS
Excludes wholesale/B2B, Certain Brand Restrictions, Special Orders or Where Otherwise Noted.
CONTACT USWe are happy to help! |
1 (888) 847-4287Mon-Sun 8am-4:00pm |