Close
|
Indian Pith Helmet |
---|
Please Note: Due to the handmade nature of Pith Helmets, be advised there might be minor imperfections in the construction of the hat. These imperfections do not hinder the look or wear of the helmet. Made in Vietnam This Indian style pith helmet, a.k.a. the Bombay Bowler, is the most popular pith helmet style in North America. These hats are made from the cork, or pith, of trees from northern Vietnam using techniques developed 100 years ago by the French during their occupation. The helmet is functional in both sunny and rainy weather. Please Note: Pith helmets can be immersed in water, whereby the wearer stays cool during use on hot summer days. Please submerge the outside of the helmet carefully, without allowing water to spill into the interior of the helmet. Approx. 4 1/2" Crown 2 1/2" Brim - Front 2 3/4" Brim - Back 2 1/4" Brim - Sides Made of: 100% Genuine Pith Handmade Cotton Twill Exterior Composite Leather Decorative Strap Size Adjustable Inner Harness Cotton Poplin Lining Lightweight Dunk in Water to Keep Cool Sizes: S/M fits sizes 6 7/8 (S) to 7 1/4 (L); L/XL* fits sizes 7 1/4 (L) to 7 3/4 (XXL); adjusts via a hook and loop ending to the interior sweatband. *Size L/XL was previously sold as the "Big Head" version of this style prior to consolidation. For Bulk/Wholesale purchase of this hat, CLICK HERE or call us at 1-888-847-4287. |
Close
|
French Pith Helmet |
---|
Please Note: Due to the handmade nature of Pith Helmets, be advised there might be minor imperfections in the construction of the hat. These imperfections do not hinder the look or wear of the helmet. Made in Vietnam This French style pith helmet is the original design from Vietnam. A hundred years ago, the French discovered the advantages of the material used to make these hats. The pith is from trees in northern Vietnam and has properties that make it both a good sun and rain shield. These helmets are handmade in Vietnam using the techniques inherited by the former French occupiers. Please Note: Pith helmets can be immersed in water, whereby the wearer stays cool during use on hot summer days. Please submerge the outside of the helmet carefully, without allowing water to spill into the interior of the helmet. Approx. 4 1/2" Crown 2 3/4" Front and Back Brim 2 1/2" Side Brims Made of: 100% Genuine Pith Handmade Cotton Twill Exterior Composite Leather Decorative Strap Size Adjustable Inner Harness Cotton Poplin Lining Lightweight Dunk in Water to Keep Cool Sizes: S/M fits sizes 6 7/8 (S) to 7 1/4 (L); L/XL* fits sizes 7 1/4 (L) to 7 1/2 (XL); adjusts via a hook and loop ending to the interior sweatband. *Size L/XL was previously sold as the "Big Head" version of this style prior to consolidation. For Bulk/ Wholesale Purchase of this hat, CLICK HERE or call us at 1-888-847-4287. |
Close
|
African Safari Pith Helmet |
---|
Please Note: Due to the handmade nature of Pith Helmets, be advised there might be minor imperfections in the construction of the hat. These imperfections do not hinder the look or wear of the helmet. Made in Vietnam The African Safari Pith Helmet is made from the core (pith) of trees that grow in northern Vietnam. They are handmade one piece at a time. This helmet, like all other pith helmets we carry, is incredible lightweight as the 4-ply wood interior has a low density (similar to balsa wood). This and our other pith helmets can be immersed in water to keep the wearer cool during hot weather. (Please submerge the outside of the helmet carefully, without allowing water to spill into the interior of the helmet.) Featuring a dark khaki cotton twill with a stylish cream pleated hat band, the African Safari Pith Helmet is ready for adventure! Please Note: Pith helmets can be immersed in water, whereby the wearer stays cool during use on hot summer days. Please submerge the outside of the helmet carefully, without allowing water to spill into the interior of the helmet. Approx. 5" Crown 2" Front Brim 2 1/2" Back Brim 2" Side Brims Made of: 100% Genuine Pith Handmade Cotton Twill Exterior Composite Leather Decorative Strap Size Adjustable Inner Harness Cotton Poplin Lining Lightweight Dunk in Water to Keep Cool Sizes: S/M fits up to size 7 1/8 (M); L/XL fits up to size 7 5/8 (XL); adjusts via a hook and loop ending to the interior sweatband. For Bulk/ Wholesale Purchase of this hat, CLICK HERE or call us at 1-888-847-4287. |
Close
|
Wool Military Beret with Lambskin Band |
---|
Made in Canada The Wool Military Beret with Lambskin Band is proudly made in North America by the same manufacturer who supplies berets for the American military (Green Berets) as well as for the Royal Air Force of Great Britain. Berets have been a part of the military uniform since the 19th century and are still seen on troops throughout the world today. There are two unique design elements on this beret: * The semi-circle cardboard insert. This enables the wearer to create a sharp angle on the beret, as well as the spot to display your badge, emblem, or pin. * The leather binding (edge) encases a nylon web band that ends in a bow, this is used to adjust the size of the beret. Approx. 9 1/2" Diameter, Flat 3" Half-Moon Insert - Front Made of: 100% Wool Made in Canada Seamless Wool Beret Semi-circle Insert at Front Lambskin Leather Binding Adjustable Nylon Web Band Unlined Sizes: 6 3/4 (54cm, S) - 8 (64cm, XXXL); fits true to size. |
Close
|
British Wolseley Pith Helmet |
---|
Please Note: Due to the handmade nature of Pith Helmets, be advised there might be minor imperfections in the construction of the hat. These imperfections do not hinder the look or wear of the helmet. Made in Vietnam This pith helmet style is reminiscent of a classic fireman's helmet. The helmet was named after M/Gen. Sir Garnet Wolseley, who developed the original pattern. We have seen many variations on the name...Wolsey, Wolesley, etc., but the correct spelling is Wolseley. Through the years there have been many minor variations to this style. Please Note: This pith helmet can be immersed in water, whereby the wearer stays cool during use on hot summer days. Please submerge the outside of the helmet carefully, without allowing water to spill into the interior of the helmet. S/M Helmet - Approx. 4 1/2" Crown 3" Brim - Front 2 1/8" Brim - Sides 3 1/8" Brim - Back L/XL Helmet - Approx. 4 1/2" Crown 3 1/4" Brim - Front 2 1/4" Brim - Sides 3 1/4" Brim - Back Made of: 100% Genuine Pith Handmade Cotton Twill Exterior Composite Leather Decorative Strap Size-Adjustable Inner Harness Contrast Cotton Lining (Green or Brown) Lightweight Dunk in Water to Stay Cool Size: S/M fits up to size 7 1/4; L/XL fits up to size 7 5/8; adjusts via a hook and loop ending to the interior sweatband. For Bulk/Wholesale purchase of this style, CLICK HERE or call us at 1-888-847-4287. |
Close
|
PFG Fish Flag Mesh FlexFit Fitted Baseball Cap |
---|
Know a fishing fanatic? The PFG Fish Flag Mesh FlexFit Fitted Baseball Cap by Columbia Sportswear was made for them! Part of their Performance Fishing Gear collection, the Fish Flag Ball Cap boasts a flat bill/brim and four breathable and stretchy back panels for hours of comfortable wear. Featuring a quirky, fish-inspired take on the USA flag, this ball cap boldly declares your love of country ... and fishing, of course! Approx. 5" Crown 2 3/4" Bill Made of: Fabric Panels & Bill - 98% Cotton, 2% Polyurethane Mesh Back Panels - 95% Polyester, 5% Polyurethane PFG Collection - Performance Fishing Gear 6-Panel Classic Design Fishing-Inspired USA Flag Front Patch 2 Buckram-Supported Fabric Front Panels Sewn Eyelets on Front Panels 4 Mesh Back Panels FlexFit Fitted Elasticized Sweatband Sizes: S/M fits sizes 6 5/8 (XS) - 7 (M); L/XL fits sizes 7 1/8 (M) - 7 5/8 (XL); XXL fits sizes 7 3/8 (L) - 8 (XXXL). |
Close
|
Wooden Hat Jack Stretcher |
---|
The Village Hat Shop Wooden Hat Jack Stretcher is made from genuine Baltic pine wood and will be your new favorite hat tool. This product protects your hat investment by maintaining the hat's size and preventing shrinkage. The Hat Jack also absorbs moisture and helps to preserve the sweatband of your hat. It is great for all caps and hats. Never wear a pinching hat again. Approx. 6 7/8" Length, Unstretched Made of: 100% Genuine Baltic Pine Wood (Excluding Center Arm) Manufacturer Instructions for Use: To Store Hat: * Lay the Wooden Hat Jack Stretcher on flat surface, labels up (wood forms are tapered). * Twist center handle to approximate hat size. * Place in hat, labels up, center handle parallel to crease in hat crown. * Twist center handle to achieve a snug fit - hat is ready for storage. ***Always rest hat on its crown, brim up.*** To Increase Hat Size: * Repeat above steps. * Boil clean water using a teapot or pan with lid slightly ajar, then reduce heat to produce a steady flow of steam. * Holding Wooden Hat Jack Stretcher handle, direct steam evenly to outside of hat band area. * Twist handle to stretch hat to desired size while applying steam. ***Do NOT overstretch any hat - 2 hat sizes maximum (2 CM maximum): Example: 7 (56 cm) to 7 1/4 (58 cm)*** * Allow hat to cool and dry 20-30 minutes before removing Hat Jack. * Repeat if hat shrinks until hat maintains desired size and fit. Size(s): S, M, and L; please see chart below. Stretcher Size Hat Size Stretch Range Small 54 CM 54 CM to 58 CM Medium 57 CM 57 CM to 60 CM Large 60 CM 60 CM to 65 CM |
Close
|
PFG Fish Flag Mesh FlexFit Fitted Baseball Cap - XXL |
---|
Know a fishing fanatic? The PFG Fish Flag Mesh FlexFit Fitted Baseball Cap by Columbia Sportswear was made for them! Part of their Performance Fishing Gear collection, the Fish Flag Ball Cap boasts a flat bill/brim and four breathable and stretchy back panels for hours of comfortable wear. Featuring a quirky, fish-inspired take on the USA flag, this ball cap boldly declares your love of country ... and fishing, of course! Approx. 5" Crown 2 3/4" Bill Made of: Fabric Panels & Bill - 98% Cotton, 2% Polyurethane Mesh Back Panels - 95% Polyester, 5% Polyurethane PFG Collection - Performance Fishing Gear 6-Panel Classic Design Fishing-Inspired USA Flag Front Patch 2 Buckram-Supported Fabric Front Panels Sewn Eyelets on Front Panels 4 Mesh Back Panels FlexFit Fitted Elasticized Sweatband Size(s): S/M fits sizes 6 5/8 (XS) - 7 (M); L/XL fits sizes 7 1/8 (M) - 7 5/8 (XL); XXL fits sizes 7 3/8 (L) - 8 (XXXL). |
Close
|
Tree Flag Mesh Flexfit Fitted Baseball Cap |
---|
Flexfit's iconic fit with a ventilated back crafted from quality stretch mesh makes for unsurpassed comfort over the long haul. Pay your respects to the conifers of the USA with the Columbia Mesh Cap with Tree flag. Approx. 5" Crown 2 5/8" Visor Made of: Fabric Panels & Bill - 98% Cotton, 2% Polyurethane Mesh Back Panels - 98% Polyester, 2% Polyurethane Tree Flag Woven Patch Classic 6-Panel Crown Fabric Front Panels (2) Breathable Mesh Back Panels (4) Buckram Support - Front Panels Only Columbia Logo Sewn Label at Back Flexfit Fitted Sweatband - Stretches to Fit Unlined Sizes: S/M fits sizes 6 7/8 (S) - 7 (M); L/XL fits sizes 7 1/4 (L) to 7 5/8 (XL). |
Close
|
PFG Fish Flag Mesh FlexFit Fitted Baseball Cap - Charcoal |
---|
Know a fishing fanatic? The PFG Fish Flag Mesh FlexFit Fitted Baseball Cap by Columbia Sportswear was made for them! Part of their Performance Fishing Gear collection, the Fish Flag Ball Cap boasts a flat bill/brim and four breathable and stretchy back panels for hours of comfortable wear. Featuring a quirky, fish-inspired take on the USA flag, this ball cap boldly declares your love of country ... and fishing, of course! Approx. 5" Crown 2 3/4" Bill Made of: Fabric Panels & Bill - 98% Cotton, 2% Polyurethane Mesh Back Panels - 95% Polyester, 5% Polyurethane PFG Collection - Performance Fishing Gear 6-Panel Classic Design Fishing-Inspired USA Flag Front Patch 2 Buckram-Supported Fabric Front Panels Sewn Eyelets on Front Panels 4 Mesh Back Panels FlexFit Fitted Stretchy Elastic Sweatband Size(s): S/M fits sizes 6 5/8 (XS) - 7 (M); L/XL fits sizes 7 1/8 (M) - 7 5/8 (XL); XXL fits sizes 7 3/8 (L) - 8 (XXXL). |
Close
|
Adventure Packable Toyo Straw Blend Sun Hat |
---|
UPF 30+ Sun Protection The Columbia Adventure Packable Toyo Straw Blend Sun Hat is true to its namesake, a large brimmed hat that is made for sun and fun. It has a remarkable sun protection rating of UPF 50+ (the maximum) and an ample brim, perfect for keeping the rays off your skin. With this Columbia sun hat, an adventures is truly waiting for you! Approx. 4" Round Crown 4 1/4" Brim Made of: 58% Toyo Straw 25% Polyester 17% Polyethylene Omni-Shade™ UPF 30+ Sun Protection Packable/Crushable Design Faux Leather Hat Band & Chin Cord with Toggle - Secured with Metal Grommets Columbia Fabric Tag - At Back Moisture-Wicking Sweatband Unlined Size(s): S/M and L/XL; fits true to size. |
Close
|
PFG Fish Flag Mesh Snapback Baseball Cap |
---|
Love Columbia's PFG Fish Flag Fitted Baseball Cap but wish it came in a snapback version? No problem! Introducing the PFG Fish Flag Mesh Snapback Baseball Cap by Columbia! Also part of their Performance Fishing Gear collection, the snapback version boasts the same look as its fitted predecessor but is finished with a classic plastic snapback that makes the cap easily adjustable. Its quirky, fishy take on the USA flag proudly states your love of country AND fishing! What's not to love? Approx. 4 1/2" Crown 2 5/8" Pre-Curved Bill Made of: Cotton Panels & Bill - 98% Cotton, 2% Polyurethane Mesh Back Panels - 100% COOLMAX® Polyester PFG Collection - Performance Fishing Gear 6-Panel Classic Design (2) Cotton Front Panels (4) Breathable Mesh Back Panels Fishing-Inspired USA Flag Front Patch Buckram-Supported Fabric Front Panels (2) Sewn Eyelets on Front Panels Unlined Size: Adjustable - Fits up to size 7 1/2 (XL) comfortably; adjusts down via plastic snapback adjuster. |
Close
|
Bora Bora Printed Booney Hat |
---|
UPF 50+ Sun Protection Deflect the sun and show off your personality with the Bora Bora Printed Booney Hat by Columbia Sportswear. Boasting Columbia Sportswear's Omni-Wick™ and Omni-Shade™ fabric technologies in fun prints, the Bora Bora not only provides best-in-class UPF 50+ sun protection, but also wicks away moisture to help keep you dry and cool. Additional features include ventilation panels, a size-adjustable toggle for a customized fit, adjustable chin cord to protect against wind, and an Omni-Wick™ sweatband. The Bora Bora Printed Booney makes practicing safe sun easy and fun! Approx. 2 3/4" Crown - Front 3 3/4" Crown - Back 3" Brim Made of: Exterior - 100% Nylon Omni-Wick™ Fabric Mesh Panels - 89% Polyester, 11% Elastane Omni-Shade™ UPF 50 Sun Protection - Modified Fibers & Tight Fabric Composition Block UVA and UVB Rays Recommended by the Skin Cancer Foundation Omni-Wick™ Fabric - Wicks Moisture Away to Fabric's Surface to Keep You Dry & Cool Rubber Logo Patch - Front Mesh Ventilation Panels Toggle-Adjustable Cord at Back - Customizes Fit Adjustable Chincord Omni-Wick™ Sweatband Unlined Packable / Crushable Size(s): S/M and L/XL. Fit true to size; customize fit using toggle-adjustable cord provided at the back of the crown. |
Close
|
Palmer Peak Repreve Pom Beanie Hat - Stone |
---|
Explore and help the planet with the Palmer Peak Repreve Pom Beanie Hat! This Columbia fleece-lined beanie will keep you warm while skiing in the mountains or any activity in the snow. It is cozy and eco-friendly, made with recycling materials. Approx. 8 3/4" Height - Flat 9" Width - Flat 2 5/8" Cuff Height - Flat Made of: 100% Recycled Polyester Made from Recycled Material Yarn Pom - Top Fairisle Pattern Design Rib Knit Cuff Knitted Body Columbia Sportswear Patch on Cuff Fleece Lining Size(s): One Size Fits Most. Fits up to size 7 3/4 (XXL) comfortably. |
USA: 1-888-VHS-HATS (1-888-847-4287)
INT'L: +1 619-906-4440 Se habla español
Shop for Hats at VillageHatShop.com | Privacy Policy | Website Accessibility | Site Map
Copyright © 1999-2020 Village Hat Shop: The #1 Source for Hats Online
*ALL SPECIAL OFFERS AND DISCOUNTS
Excludes wholesale/B2B, Certain Brand Restrictions, Special Orders or Where Otherwise Noted.
CONTACT USWe are happy to help! |
1 (888) 847-4287Mon-Sun 8am-4:00pm |