Close
|
3-Pleat Cotton Puggaree Hat Band |
---|
A new hat band can do wonders to freshen up any old hat, may we suggest the 3-Pleat Cotton Puggaree Hat Band by Capas Headwear. Featuring a multitude of great colors, this pug hat band is made of 100% cotton. Need to dress your hat up in something new? Look no further than the 3-Pleat Cotton Puggaree Hat Band - a fresh new look to your favorite hat! For best results, please follow all instructions for use (below). *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. Approx. 28" Total Length, End to End 1 7/8" Width Made of: 100% Cotton 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! |
Close
|
3-Pleat Satin Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a multitude of great colors, the 3-Pleat Satin Puggaree Hat Band will give a fresh new look to your favorite hat. For best results, please follow all instructions for use (below). Approx. 28" Total Length, End to End 2" Width Made of: 100% Satin 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Paisley 3-Pleat Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a classic paisley print in varying colors, the Paisley 3-Pleat Puggaree Hat Band by Capas Headwear will give a colorful new twist to your favorite hat. For best results, please follow all instructions for use (below). Approx. 29" Total Length, End to End 1 7/8" Width Made of: 100% Polyester 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Roughage NASA Mesh Trucker Snapback Baseball Cap |
---|
Houston, we have a great hat! Once again, American Needle knocks it out of the park with the Roughage NASA Mesh Trucker Snapback Baseball Cap. The sewn eyelets and mesh back panels ensure this hat is as breathable as can be, and the NASA patch on front is so trendy right now. For all your adventures, pick this great cap. Approx. 4 3/4" Crown 2 3/4" Pre-Curved Stiff Brim Made of: 100% Cotton (Brim and Front 2 Panels) 100% Polyester Mesh (Back 4 Crown Panels) Classic 6-Panel Crown Breathable Sewn Eyelets - Front (2) Panels Buckram-Supported Front Panels (2) Breathable Mesh Back Panels (4) NASA Patch Cotton Twill Sweatband Unlined Size: Adjustable - Adjusts via plastic snapback to fit up to size 7 3/4 (XXL) comfortably. |
Close
|
NASA Cotton Twill Bucket Hat |
---|
Once again, American Needle knocks it out of the park with a NASA-inspired hat, but this ones a little different: the NASA Cotton Twill Bucket Hat! Yep, this one is in the currently trendy bucket hat style. Made of 100% Cotton with sewn eyelets, this hat is as breathable as can be. For all your adventures, pick this great hat. Approx. 3 1/2" Flat Crown 2" Stitched Brim Made of: 100% Cotton NASA Patch - Front Sewn Eyelets for Ventilation Cotton Sweatband Packable / Crushable Unlined Size(s): S/M and L/XL - Fits true to size. |
Close
|
NASA Micro Cotton Strapback Baseball Cap Dad Hat |
---|
American Needle's NASA Micro Cotton Strapback Baseball Cap Dad Hat is made of 100% cotton with a delicate NASA logo embroidery at the front. This 6-panel baseball cap features a pre-curved bill, top button, cotton twill sweatband, sewn eyelets and an unlined interior. American Needle has knocked it out of the park with this NASA-inspired hat. Approx. 4 1/4" 6-Panel Crown 2 3/4" Pre-Curved Bill Made of: 100% Cotton Soft and Unstructured 6-Panel Crown Low Profile Design Sewn Ventilation Eyelets NASA Logo Embroidery - Front Self-Fabric Strapback Adjuster Cotton Twill Sweatband Inseam Taping Unlined Size(s): Adjustable - Fits up to size 7 5/8 (XL) comfortably. |
Close
|
Polka Dot 3-Pleat Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring classic white polka dots against black, brown or navy, the Polka Dot 3-Pleat Puggaree Hat Band by Capas Headwear will add a fresh new twist to your favorite hat. For best results, please follow all instructions for use (below). Approx. 26 1/2" Total Length, End to End 1 7/8" Width Made of: 100% Cotton 3-Pleat Puggaree Hat Band Cotton Twill Fabric Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
USA: 1-888-VHS-HATS (1-888-847-4287)
INT'L: +1 619-906-4440 Se habla español
Shop for Hats at VillageHatShop.com | Privacy Policy | Website Accessibility | Site Map
Copyright © 1999-2020 Village Hat Shop: The #1 Source for Hats Online
*ALL SPECIAL OFFERS AND DISCOUNTS
Excludes wholesale/B2B, Certain Brand Restrictions, Special Orders or Where Otherwise Noted.
CONTACT USWe are happy to help! |
1 (888) 847-4287Mon-Sun 8am-4:00pm |