Close
|
3-Pleat Cotton Puggaree Hat Band |
---|
A new hat band can do wonders to freshen up any old hat, may we suggest the 3-Pleat Cotton Puggaree Hat Band by Capas Headwear. Featuring a multitude of great colors, this pug hat band is made of 100% cotton. Need to dress your hat up in something new? Look no further than the 3-Pleat Cotton Puggaree Hat Band - a fresh new look to your favorite hat! For best results, please follow all instructions for use (below). *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. Approx. 28" Total Length, End to End 1 7/8" Width Made of: 100% Cotton 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! |
Close
|
3-Pleat Satin Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a multitude of great colors, the 3-Pleat Satin Puggaree Hat Band will give a fresh new look to your favorite hat. For best results, please follow all instructions for use (below). Approx. 28" Total Length, End to End 2" Width Made of: 100% Satin 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Fisherman Cotton Blend Bucket Hat |
---|
Made in the USA A bucket hat with some pork pie tendencies, we just love the originality of the Fisherman Cotton Blend Bucket Hat by the New York Hat Company. With a short, snap brim usually associated with a pork pie, the crushable, square crown and cotton material are bucket hat staples. Even the metal eyelets and grosgrain ribbon hat band are regularly seen on more traditional buckets. We hope you enjoy this unique hybrid from the New York Hat Company! Approx. 3 3/4" Square Crown 1 1/2" Snap Brim Made of: 65% Cotton 35% Polyester Made in the USA Packable/Crushable Crown 4 Metal Eyelets - For Ventilation Grosgrain Striped Ribbon Hat Band Stitched Brim Self Fabric Binding On Brim Cotton Twill Sweatband Inseam Taping Unlined Size(s): M, L and XL; fits true to size. |
Close
|
Paisley 3-Pleat Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a classic paisley print in varying colors, the Paisley 3-Pleat Puggaree Hat Band by Capas Headwear will give a colorful new twist to your favorite hat. For best results, please follow all instructions for use (below). Approx. 29" Total Length, End to End 1 7/8" Width Made of: 100% Polyester 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Geraldine Toyo Straw Rancher Fedora Hat |
---|
FINAL SALE Made in the USA A simple and no frills classic by Betmar, the Geraldine Toyo Straw Rancher Fedora Hat. This is a sleek hat that will give you a minimialistic and put together look without much effort. The built is tightly woven toyo straw with a stiff crown and flexible brim. Made in the USA, the Geraldine is simply finished with Betmar's signature pin. Approx. 4 1/4" Teardrop Crown 3 1/2" Flat Brim Made of: 100% Toyo Straw Made in the USA Stiff Crown, Flexible Brim Tight Weave Betmar Side Pin Grosgrain Ribbon Sweatband - Adjustable Drawstring Unlined Size(s): S/M and M/L only - fits true to size; adjustable drawstring sweatband for comfortable fit. |
Close
|
Kepi Wool Civil War Cap |
---|
Keep the calvary drum beating and your musket smoking with Jacobson's Kepi Civil War Cap. A replica of the caps worn by men at arms during the Civil War era, this cap makes a great costume hat. Complete with musket pendant at its front, the Kepi Cap gives you the era-appropriate look without breaking the bank. Not historically accurate, hat is a novelty item. Approx. 2 1/2" Front 4 1/2" Back Crown 2 1/2" Bill/Visor Made of: 100% Wool Musket Pendant Hat Band with Side Buttons Cotton Sweatband Unlined Sizes: 7 to 7 1/2; fits true to size. |
Close
|
Six Panel Wool Skull Cap Beanie Hat |
---|
Made in the USA Proudly made in the USA, the Six Panel Wool Skull Cap Beanie Hat features a skull cap design with a soft, six-panel crown. Crafted in the USA of warm wool, this beanie cap hugs your head for a fitted and streamlined look. Approx. 4" High Crown 8" Diameter 2" Cuff Made of: 100% Wool Made in the USA 6-Panel Skull Cap Design Cuff Cotton Sweatband Cotton Inseam Taping Unlined Packable / Crushable Sizes: M, L and XL; fits true to size. |
Close
|
Knotted Cotton Cloche Hat |
---|
UPF 50+ Sun Protection The Knotted Cloche from Betmar is a perennial classic. The 100% cotton basic can be seen on travelers worldwide or in backyards across America, provides 50+ UPF. CCMAC: Colette Coyne Melanoma Awareness Campaign 50+ UPF tag. Approx. 4 1/2" Round Crown 2" Wide Stitched Brim - Back 2 1/4" Wide Stitched Brim - Front & Sides Made of: 100% Cotton Twill UPF 50+ Sun Protection Rating Ventilation Eyelets at Side Betmar Side Pin Back Ties - Adjusts Fit Cotton Poplin Lining & Sweatband Size: One Size Fits Most - Fits up to size 7 1/8 (M) comfortably. |
Close
|
Kids' Wool Felt C-Crown Trilby Fedora Hat |
---|
Whether you need it for a Halloween costume or a school play, or maybe your little one wants to start a trend. The wool felt C-Crown Stingy Brim Fedora is a scaled down version of a classic shape. Approx. 3 1/2" C-Crown (Teardrop) 1 1/4" Overwelt Stingy Brim Made of: 100% Wool Felt 1" Wide Grosgrain Ribbon Hat Band Vinyl sweatband Unlined Sizes: Child's S, M, L, and XL. Suggested for: Kids 2-10 Years Old (see chart below): Age Inches CMS Hat Size Size 1 - 2 years 18 7/8 48 6 Small 2 - 4 years 19 5/8 50 6 1/4 Medium 5 - 7 years 20 3/8 52 6 1/2 Large 8 - 10 years 21 1/8 54 6 3/4 X-Large |
Close
|
Polka Dot 3-Pleat Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring classic white polka dots against black, brown or navy, the Polka Dot 3-Pleat Puggaree Hat Band by Capas Headwear will add a fresh new twist to your favorite hat. For best results, please follow all instructions for use (below). Approx. 26 1/2" Total Length, End to End 1 7/8" Width Made of: 100% Cotton 3-Pleat Puggaree Hat Band Cotton Twill Fabric Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
USA: 1-888-VHS-HATS (1-888-847-4287)
INT'L: +1 619-906-4440 Se habla español
Shop for Hats at VillageHatShop.com | Privacy Policy | Website Accessibility | Site Map
Copyright © 1999-2020 Village Hat Shop: The #1 Source for Hats Online
*ALL SPECIAL OFFERS AND DISCOUNTS
Excludes wholesale/B2B, Certain Brand Restrictions, Special Orders or Where Otherwise Noted.
CONTACT USWe are happy to help! |
1 (888) 847-4287Mon-Sun 8am-4:00pm |