Close
|
French Pith Helmet |
---|
Please Note: Due to the handmade nature of Pith Helmets, be advised there might be minor imperfections in the construction of the hat. These imperfections do not hinder the look or wear of the helmet. Made in Vietnam This French style pith helmet is the original design from Vietnam. A hundred years ago, the French discovered the advantages of the material used to make these hats. The pith is from trees in northern Vietnam and has properties that make it both a good sun and rain shield. These helmets are handmade in Vietnam using the techniques inherited by the former French occupiers. Please Note: Pith helmets can be immersed in water, whereby the wearer stays cool during use on hot summer days. Please submerge the outside of the helmet carefully, without allowing water to spill into the interior of the helmet. Approx. 4 1/2" Crown 2 3/4" Front and Back Brim 2 1/2" Side Brims Made of: 100% Genuine Pith Handmade Cotton Twill Exterior Composite Leather Decorative Strap Size Adjustable Inner Harness Cotton Poplin Lining Lightweight Dunk in Water to Keep Cool Sizes: S/M fits sizes 6 7/8 (S) to 7 1/4 (L); L/XL* fits sizes 7 1/4 (L) to 7 1/2 (XL); adjusts via a hook and loop ending to the interior sweatband. *Size L/XL was previously sold as the "Big Head" version of this style prior to consolidation. For Bulk/ Wholesale Purchase of this hat, CLICK HERE or call us at 1-888-847-4287. |
Close
|
Indian Pith Helmet |
---|
Please Note: Due to the handmade nature of Pith Helmets, be advised there might be minor imperfections in the construction of the hat. These imperfections do not hinder the look or wear of the helmet. Made in Vietnam This Indian style pith helmet, a.k.a. the Bombay Bowler, is the most popular pith helmet style in North America. These hats are made from the cork, or pith, of trees from northern Vietnam using techniques developed 100 years ago by the French during their occupation. The helmet is functional in both sunny and rainy weather. Please Note: Pith helmets can be immersed in water, whereby the wearer stays cool during use on hot summer days. Please submerge the outside of the helmet carefully, without allowing water to spill into the interior of the helmet. Approx. 4 1/2" Crown 2 1/2" Brim - Front 2 3/4" Brim - Back 2 1/4" Brim - Sides Made of: 100% Genuine Pith Handmade Cotton Twill Exterior Composite Leather Decorative Strap Size Adjustable Inner Harness Cotton Poplin Lining Lightweight Dunk in Water to Keep Cool Sizes: S/M fits sizes 6 7/8 (S) to 7 1/4 (L); L/XL* fits sizes 7 1/4 (L) to 7 3/4 (XXL); adjusts via a hook and loop ending to the interior sweatband. *Size L/XL was previously sold as the "Big Head" version of this style prior to consolidation. For Bulk/Wholesale purchase of this hat, CLICK HERE or call us at 1-888-847-4287. |
Close
|
African Safari Pith Helmet |
---|
Please Note: Due to the handmade nature of Pith Helmets, be advised there might be minor imperfections in the construction of the hat. These imperfections do not hinder the look or wear of the helmet. Made in Vietnam The African Safari Pith Helmet is made from the core (pith) of trees that grow in northern Vietnam. They are handmade one piece at a time. This helmet, like all other pith helmets we carry, is incredible lightweight as the 4-ply wood interior has a low density (similar to balsa wood). This and our other pith helmets can be immersed in water to keep the wearer cool during hot weather. (Please submerge the outside of the helmet carefully, without allowing water to spill into the interior of the helmet.) Featuring a dark khaki cotton twill with a stylish cream pleated hat band, the African Safari Pith Helmet is ready for adventure! Please Note: Pith helmets can be immersed in water, whereby the wearer stays cool during use on hot summer days. Please submerge the outside of the helmet carefully, without allowing water to spill into the interior of the helmet. Approx. 5" Crown 2" Front Brim 2 1/2" Back Brim 2" Side Brims Made of: 100% Genuine Pith Handmade Cotton Twill Exterior Composite Leather Decorative Strap Size Adjustable Inner Harness Cotton Poplin Lining Lightweight Dunk in Water to Keep Cool Sizes: S/M fits up to size 7 1/8 (M); L/XL fits up to size 7 5/8 (XL); adjusts via a hook and loop ending to the interior sweatband. For Bulk/ Wholesale Purchase of this hat, CLICK HERE or call us at 1-888-847-4287. |
Close
|
British Wolseley Pith Helmet |
---|
Please Note: Due to the handmade nature of Pith Helmets, be advised there might be minor imperfections in the construction of the hat. These imperfections do not hinder the look or wear of the helmet. Made in Vietnam This pith helmet style is reminiscent of a classic fireman's helmet. The helmet was named after M/Gen. Sir Garnet Wolseley, who developed the original pattern. We have seen many variations on the name...Wolsey, Wolesley, etc., but the correct spelling is Wolseley. Through the years there have been many minor variations to this style. Please Note: This pith helmet can be immersed in water, whereby the wearer stays cool during use on hot summer days. Please submerge the outside of the helmet carefully, without allowing water to spill into the interior of the helmet. S/M Helmet - Approx. 4 1/2" Crown 3" Brim - Front 2 1/8" Brim - Sides 3 1/8" Brim - Back L/XL Helmet - Approx. 4 1/2" Crown 3 1/4" Brim - Front 2 1/4" Brim - Sides 3 1/4" Brim - Back Made of: 100% Genuine Pith Handmade Cotton Twill Exterior Composite Leather Decorative Strap Size-Adjustable Inner Harness Contrast Cotton Lining (Green or Brown) Lightweight Dunk in Water to Stay Cool Size: S/M fits up to size 7 1/4; L/XL fits up to size 7 5/8; adjusts via a hook and loop ending to the interior sweatband. For Bulk/Wholesale purchase of this style, CLICK HERE or call us at 1-888-847-4287. |
Close
|
Wool Military Beret with Lambskin Band |
---|
Made in Canada The Wool Military Beret with Lambskin Band is proudly made in North America by the same manufacturer who supplies berets for the American military (Green Berets) as well as for the Royal Air Force of Great Britain. Berets have been a part of the military uniform since the 19th century and are still seen on troops throughout the world today. There are two unique design elements on this beret: * The semi-circle cardboard insert. This enables the wearer to create a sharp angle on the beret, as well as the spot to display your badge, emblem, or pin. * The leather binding (edge) encases a nylon web band that ends in a bow, this is used to adjust the size of the beret. Approx. 9 1/2" Diameter, Flat 3" Half-Moon Insert - Front Made of: 100% Wool Made in Canada Seamless Wool Beret Semi-circle Insert at Front Lambskin Leather Binding Adjustable Nylon Web Band Unlined Sizes: 6 3/4 (54cm, S) - 8 (64cm, XXXL); fits true to size. |
Close
|
Boa Vida Palm Straw Fedora Hat |
---|
FINAL SALE A perfect addition to your summer vacation, the Boa Vida Palm Straw Fedora Hat by Goorin Bros. Made of 100% palm straw, this hat pairs perfectly with salty hair and sandy feet. The hat band is multilayered with paisley pattern fabric and grosgrain ribbon, finishing with a tassel for added flair. Approx. 4 1/4" Teardrop Crown 3 1/2" Downturned Brim Made of: 100% Palm Straw Flexible Body Woven Body Multilayered Hat Band - Paisley Pattern Fabric and Grosgrain Ribbon Cotton Twill Sweatband Unlined Size(s): S, M, L and XL; fits true to size. FINAL SALE |
Close
|
Wooden Hat Jack Stretcher |
---|
The Village Hat Shop Wooden Hat Jack Stretcher is made from genuine Baltic pine wood and will be your new favorite hat tool. This product protects your hat investment by maintaining the hat's size and preventing shrinkage. The Hat Jack also absorbs moisture and helps to preserve the sweatband of your hat. It is great for all caps and hats. Never wear a pinching hat again. Approx. 6 7/8" Length, Unstretched Made of: 100% Genuine Baltic Pine Wood (Excluding Center Arm) Manufacturer Instructions for Use: To Store Hat: * Lay the Wooden Hat Jack Stretcher on flat surface, labels up (wood forms are tapered). * Twist center handle to approximate hat size. * Place in hat, labels up, center handle parallel to crease in hat crown. * Twist center handle to achieve a snug fit - hat is ready for storage. ***Always rest hat on its crown, brim up.*** To Increase Hat Size: * Repeat above steps. * Boil clean water using a teapot or pan with lid slightly ajar, then reduce heat to produce a steady flow of steam. * Holding Wooden Hat Jack Stretcher handle, direct steam evenly to outside of hat band area. * Twist handle to stretch hat to desired size while applying steam. ***Do NOT overstretch any hat - 2 hat sizes maximum (2 CM maximum): Example: 7 (56 cm) to 7 1/4 (58 cm)*** * Allow hat to cool and dry 20-30 minutes before removing Hat Jack. * Repeat if hat shrinks until hat maintains desired size and fit. Size(s): S, M, and L; please see chart below. Stretcher Size Hat Size Stretch Range Small 54 CM 54 CM to 58 CM Medium 57 CM 57 CM to 60 CM Large 60 CM 60 CM to 65 CM |
Close
|
Panther 100 Trucker Snapback Baseball Cap |
---|
Introducing the Panther 100 Trucker Snapback from Goorin Bros’ Animal Farm Collection. An updated take on the classic trucker silhouette, this all-over canvas cap is made with 100% cotton, and features an embroidered “PANTHER” patch and an added cord across the bill. On the left side of the bill rests a Goorin Bros logo, and on the underside is their holographic sticker to ensure the authenticity of this ferociously sleek cap. Approx. 3 3/4" Crown 2 1/2" Pre-Curved Bill/Visor Made of: 100% Cotton Full Fabric Baseball Cap Curved Bill/Visor “Animal Farm” Collection Embroidered “Panther” Patch Goorin Bros Logo – Left Side Bill Holographic Sticker Of Authenticity Cotton Sweatband Size(s): Adjustable - Fits approximately up to size 7 5/8 (X-Large) comfortably. |
Close
|
Stallion Mesh Trucker Snapback Baseball Cap |
---|
Are you a workhorse that is always on the go? Then the Stallion Mesh Trucker Snapback Baseball Cap from Goorin Bros is the cap for you! The mesh back panels and buckram-supported front panels create a classic snapback design, and emphasize comfort like no other. Plus, the stallion patch on the front of the cap allows you to show that you're a real animal! Also available in a Snapback Baseball Cap for kids. Approx. 4 3/4" Crown 2 3/8" Pre-Curved Bill Made of: 57% Polyester 43% Cotton Classic 5-Panel Design Mesh Back Panels (4) Buckram-Supported Front Panel Embroidered Stallion Patch Goorin Bros. Tag Loop Cotton Twill Sweatband Unlined Size(s): Adjustable - Adjusts via plastic snapback, fits up to size 7 5/8 (XL) comfortably. |
Close
|
Kids' Little Horsey Mesh Trucker Snapback Baseball Cap |
---|
Goorin Bros includes the kiddos with the Kids' Little Horsey Mesh Trucker Snapback Baseball Cap! The mesh back panels and buckram-supported front panels create a classic snapback design, and emphasize comfort like no other. Plus, the patch on the front of the cap allows kids to have a little fun! Approx. 4 1/4" Crown 2 1/2" Pre-Curved Bill Made of: 57% Polyester 43% Cotton Classic 5-Panel Design Mesh Back Panels (4) Buckram-Supported Fleece Front Panel Embroidered Horseplay Patch Berber Fleece Bill Goorin Bros. Tag Loop Plastic Snapback Adjuster Cotton Twill Sweatband Unlined Size(s): Adjustable. Fits kids up to size 20 1/8" comfortably. |
Close
|
Goat Trucker Snapback Baseball Cap - Red |
---|
Go WILD with the Goat Trucker Snapback Baseball Cap from Goorin Bros! The mesh back panels and buckram-supported front panels create a classic snapback design, and emphasize comfort like no other. Plus, the goat patch on the front of the cap allows you to show that you're the "Greatest of All Time!". Approx. 4 3/4" Crown 2 3/8" Pre-Curved Bill Made of: 57% Polyester 43% Cotton Classic 6-Panel Design Mesh Back Panels (4) Buckram-Supported Front Panels (2) Embroidered Goat Patch Goorin Bros. Tag Loop Cotton Twill Sweatband Unlined Size: Adjustable. Adjusts via plastic snapback, fits up to size 7 5/8 (XL) comfortably. |
Close
|
Bull Mesh Trucker Snapback Baseball Cap |
---|
Goorin Bros hit the bull's eye with their latest, the Bull Mesh Trucker Snapback Baseball Cap! The mesh back panels and buckram-supported front panels create a classic snapback design, and emphasize comfort like no other. Plus, the bull patch on the front of the cap allows you to show that you're a real animal! Approx. 4 3/4" Crown 2 1/2" Pre-Curved Bill Made of: 57% Polyester 43% Cotton Classic 5-Panel Design Mesh Back Panels (4) Buckram-Supported Front Panel Emboirdered Bull Patch Goorin Bros. Tag Loop Cotton Twill Sweatband Unlined Size(s): Adjustable. Adjusts via plastic snapback, fits up to size 7 5/8 (XL) comfortably. |
Close
|
Cock Mesh Trucker Snapback Baseball Cap - Red |
---|
Go WILD with the Cock Mesh Trucker Snapback Baseball Cap from Goorin Bros! The mesh back panels and buckram-supported front panels create a classic snapback design, and emphasize comfort like no other. Plus, the patch on the front of the cap allows you to show that you're a real animal! Approx. 4 3/4" Crown 2 1/2" Pre-Curved Bill Made of: 57% Polyester 43% Cotton Classic 5-Panel Design Mesh Back Panels (4) Buckram-Supported Front Panel Embroidered Rooster Animal Patch Goorin Bros. Tag Loop Cotton Twill Sweatband Unlined Size(s): Adjustable. Adjusts via plastic snapback, fits up to size 7 5/8 (XL) comfortably. |
Close
|
Haute Goat Knit Beanie Hat |
---|
If you're an absolute animal, you definitely need the Haute Goat Knit Beanie Hat from Goorin Bros! This casual beanie features a rib knit body with the classic folded cuff. Additionally, the G.O.A.T. patch on the front of the beanie really shows off your wild side! Also available in a Snapback Baseball Cap. Approx. 9" Height 8 1/2" Width Made of: 100% Acrylic Rib Knit Body Extra Wide Cuff Goorin Bros Logo Label Goat Patch on Front Unlined Size(s): One Size Fits Most - Fits up to size 7 3/4 (XXL) comfortably. |
Close
|
Light Touches Knit Beanie Hat |
---|
If you're an absolute animal, you definitely need the Light Touches Knit Beanie Hat from Goorin Bros! This casual beanie features a rib knit body with the classic folded cuff. Additionally, the King patch on the front of the beanie really shows off your wild side! Approx. 9" Height 8 1/2" Width Made of: 100% Acrylic Rib Knit Body Extra Wide Cuff Goorin Bros Logo Label Lion Patch on Front Unlined Size(s): One Size Fits Most - Fits up to size 7 3/4 (XXL) comfortably. |
USA: 1-888-VHS-HATS (1-888-847-4287)
INT'L: +1 619-906-4440 Se habla español
Shop for Hats at VillageHatShop.com | Privacy Policy | Website Accessibility | Site Map
Copyright © 1999-2020 Village Hat Shop: The #1 Source for Hats Online
*ALL SPECIAL OFFERS AND DISCOUNTS
Excludes wholesale/B2B, Certain Brand Restrictions, Special Orders or Where Otherwise Noted.
CONTACT USWe are happy to help! |
1 (888) 847-4287Mon-Sun 8am-4:00pm |