Close
|
Cotton Hat Sizer |
---|
Please Note: This item sells as a SINGLE sizing strip in either Black or White. Made in the USA Find yourself in-between hat sizes? Need a better fit? Prefer the added comfort of a cotton sweatband? All this can be achieved with the Cap-Ban-Nu Cotton Hat Sizer ideal for sizing your hat down by half a size! For best results, please follow all instructions for use (below). Instructions: * Remove tape backing from product. * Stick to the front section of the hat's sweatband or whatever area the hat has a loose fit (front, back or sides). You can also place the sizer behind the sweatband, directly onto the hat, or onto the backside of the sweatband. * Discard the used strip when soiled and replace. Approx. 10 3/4" Length 1" Width 2.5 MM Thick Made of: 100% Cotton Jersey Size: One single sizer per pack. One Size Fits Most. |
Close
|
Golf Ball Hat-Tac |
---|
FINAL SALE Made in the USA Never again worry about your hats becoming misshapen, sagging, or losing their curve, thanks to the Golf Ball Hat-Tac. This revolutionary invention sticks to any surface thanks to the 3M foam adhesive backing, and the fixed curve platform allows hats to comfortably rest in an upright position. With this patented and trademarked design, your ball cap, fedora, or any other piece of headwear will never lose its curve. This is the perfect place to hang your hat! Approx. 45.5 mm High 97 mm Wide 50 mm Deep Made in the USA 3M Foam Adhesive Backing Fixed Curve Platform Golf Ball and Putting Green Print Sturdy and Reliable Works for Hats of All Sizes Manufacturer Instructions for How to Apply: * Prep surface: Take a soft wash cloth with Isopropyl or similar alcohol cleaner to create a nice clean surface for the HAT-TAC™ to stick onto. Our recommendation is to find a smooth clean surface with little texture. * After prepping the surface: Grab the tab sticking out and peel away the red backing with ease. HAT-TAC™ attaches to the wall using a foam medium hold double sided adhesive. * Position: Align your HAT-TAC™ a few centimeters off the wall, making sure to the top so is perfectly level. * Last step: Push softly, just enough to hold the HAT-TAC™ in place on the surface. Take a few steps back to make sure it is exactly where you want it positioned. If the positioning is perfect, push and hold the back side of the HAT-TAC™ to the wall firmly for 30 seconds then wait 30 minutes before hanging a hat. Manufacturer Instructions for How to Remove: * Step One: Firmly grab each side of the HAT-TAC™ with both hands. * Step Two: Slowly wiggle the HAT-TAC™ up and down to separate the adhesive back from the wall. Be careful during this step as removing too fast or incorrectly could peel paint. FINAL SALE |
Close
|
Splash Tie Dye Artisan Rush Straw Lifeguard Hat |
---|
The Splash Tie Dye Artisan Rush Straw Lifeguard Hat by new hat company, Makai Hat Company, features a classic rush straw lifeguard hat body, a tie dye fabric underbrim and a Makai sewn patch at the front. An adjustable chincord adds protection during windy conditions; an elasticzed sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 1/4" Cattleman Crown 4 1/2" Downturned Brim Made of: 100% Rush Straw Flexible Design Sewn Makai Patch - Front Tie Dye Fabric Trimmed Brim Tie Dye Fabric Underbrim Braided Rope Chin Cord with Wooden Adjustor Elasticized Sweatband Unlined Crown Size(s): S/M and L/XL; fits true to size. |
Close
|
Cotton Terry Cloth Bucket Hat |
---|
The Cotton Terry Cloth Bucket Hat by San Diego Hat Company is a fun and trendy bucket hat for the coming spring and summer months! Features a terry cloth finish and an array of bright, fashionable colors. Adjust the interior drawstring to your perfect fit! Approx. 3 3/4" Square Crown 2 3/8" Downturned Brim Made of: 100% Cotton Packable/Crushable Terry Cloth Finish Cotton Sweatband - Adjustable Drawstring Inseam Taping Cotton Lining Size(s): One Size Fits Most - Fits up to size 7 1/4 (L) comfortably; adjustable drawstring sweatband for comfortable fit. |
Close
|
Kids' Under the Sea Rush Straw Lifeguard Hat |
---|
The Kids' Under the Sea Rush Straw Lifeguard Hat by new hat company, Makai Hat Company, features a classic rush straw lifeguard hat body, a fun under the sea-inspired fabric underbrim and a Makai sewn patch at the front. An adjustable chincord adds protection during windy conditions; an elasticized sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4" Cattleman Crown 3 3/4" Downturned Brim Made of: 100% Rush Straw Flexible Design Sewn Makai Patch - Front Under the Sea-Inspired Fabric Trimmed Brim Under the Sea-Inspired Fabric Underbrim Cotton Break-Away Chin Cord with Plastic Toggle Makai Logo Label Elasticized Sweatband Unlined Crown Ages 4-6+ Size(s): Child - fits ages 4 to 6 years (up to 54 cm). |
USA: 1-888-VHS-HATS (1-888-847-4287)
INT'L: +1 619-906-4440 Se habla español
Shop for Hats at VillageHatShop.com | Privacy Policy | Website Accessibility | Site Map
Copyright © 1999-2020 Village Hat Shop: The #1 Source for Hats Online
*ALL SPECIAL OFFERS AND DISCOUNTS
Excludes wholesale/B2B, Certain Brand Restrictions, Special Orders or Where Otherwise Noted.
CONTACT USWe are happy to help! |
1 (888) 847-4287Mon-Sun 8am-4:00pm |