Close
|
Italian Straw Skimmer Hat |
---|
Made in Italy Although superseded by the Panama hat in this century, the Skimmer was for many decades the man's straw hat of choice. The Italian Skimmer by Capas is Made in Italy from 4-ply Koberg straw. This is an authentic, high quality Skimmer hat often assiciated with barber shop quartets, jazz bands, and the like. (Also known as a Boater or Sailor). Approx. 3 1/2" Flat Top Crown 2 1/4" Flat Brim Made of: 100% 4-Ply Koberg Straw Striped Hat Band with Side Bow Firm/Stiff Body Leather Sweatband Lined Sizes: Fitted - Sizes 6 7/8 (S) to 7 3/4 (XXL); fits true to size. |
Close
|
3-Pleat Cotton Puggaree Hat Band |
---|
A new hat band can do wonders to freshen up any old hat, may we suggest the 3-Pleat Cotton Puggaree Hat Band by Capas Headwear. Featuring a multitude of great colors, this pug hat band is made of 100% cotton. Need to dress your hat up in something new? Look no further than the 3-Pleat Cotton Puggaree Hat Band - a fresh new look to your favorite hat! For best results, please follow all instructions for use (below). *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. Approx. 28" Total Length, End to End 1 7/8" Width Made of: 100% Cotton 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! |
Close
|
Utah TechStraw Lifeguard Hat |
---|
Made in the USA UPF 50+ Sun Protection There is something new and exciting under the sun. A handwoven straw hat that loves water. Created by industrial designer Stefan Schinzinger to answer the need for a straw hat that's water friendly. Made from virtually indestructible, handwoven polypropolyene TechStraw, the Riverz Utah TechStraw Lifeguard Hat has the look of a natural handwoven straw. It's light, breathable and water-resistant. It's crushable, floats and will maintain it's shape and stay light and functional when wet—just shake to dry. Hand wash in soapy water and wear another day. The Riverz Utah TechStraw Lifeguard Hat features a wide brim that creates a tent of shade, a crown that is ventilated for those 110° days, a super-wicking, hypo-allergenic COOLMAX® elastic sweatband, a stow away chincord and a webbing band with a cam lock buckle to adjust size. Riverz hats can easily be worn comfortably all day long in any conditions. They are dream hats for fishing, watersports, hiking, camping and travel. Approx. 4" Cattleman Crown 4 3/4" Upturned Brim Made of: 100% Handwoven Polypropylene TechStraw® Made in the USA UPF 50+ Sun Protection Rating TechStraw® - Cool, Comfortable, Lightweight & Breathable Adjustable Webbing Hat Band COOLMAX® Sweatband - Moisture-Wicking Chincord/Tumpline Stows Away Underwelt Brim Open Weave for Ventilation Maintains Shape When Wet Hand-Washable Floats! Sizes: S, M, L, XL and XXL; fits true to size. |
Close
|
3-Pleat Satin Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a multitude of great colors, the 3-Pleat Satin Puggaree Hat Band will give a fresh new look to your favorite hat. For best results, please follow all instructions for use (below). Approx. 28" Total Length, End to End 2" Width Made of: 100% Satin 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Paisley 3-Pleat Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a classic paisley print in varying colors, the Paisley 3-Pleat Puggaree Hat Band by Capas Headwear will give a colorful new twist to your favorite hat. For best results, please follow all instructions for use (below). Approx. 29" Total Length, End to End 1 7/8" Width Made of: 100% Polyester 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Cisco Wool Felt Western Hat |
---|
Made in the USA Want a part of the Resistol Wool Collection but don't want a cattleman crown? Take a look at the Cisco Wool Felt Western Hat with a Gus crown to grab anyone's attention. Approx. 4" Gus Crown - Front 5" Gus Crown - Back 4 3/8" Curved Brim Made of: 100% Wool Felt Leather and Bead Hat Band Regular Oval Firm/Stiff Body 3X Wool Felt Leather Sweatband Satin Lined Sizes: 6 3/4 (XS) - 7 3/4 (XXL); fits true to size. |
Close
|
Briscoe Wool Felt Western Hat |
---|
Made in the USA The Briscoe Wool Felt Western Hat by Resistol is a western hat with a stiff body that creates an absolutely beautiful silhouette. A leather hat band with silver accents adorns the crown while the interior boasts a leather sweatband and satin interior. This Resistol hat has been made in Texas, U.S.A. Approx. 3 3/4" Teardrop Crown 3 1/2" Curved Brim Made of: 100% Wool Felt Made in the USA 3X Wool Felt Firm/Stiff Body Leather Hat Band Silver Accents Raw Edge Brim Leather Sweatband Satin Lining Size(s): 6 7/8 through 7 3/4; fits true to size. |
Close
|
Golf Ball Hat-Tac |
---|
FINAL SALE Made in the USA Never again worry about your hats becoming misshapen, sagging, or losing their curve, thanks to the Golf Ball Hat-Tac. This revolutionary invention sticks to any surface thanks to the 3M foam adhesive backing, and the fixed curve platform allows hats to comfortably rest in an upright position. With this patented and trademarked design, your ball cap, fedora, or any other piece of headwear will never lose its curve. This is the perfect place to hang your hat! Approx. 45.5 mm High 97 mm Wide 50 mm Deep Made in the USA 3M Foam Adhesive Backing Fixed Curve Platform Golf Ball and Putting Green Print Sturdy and Reliable Works for Hats of All Sizes Manufacturer Instructions for How to Apply: * Prep surface: Take a soft wash cloth with Isopropyl or similar alcohol cleaner to create a nice clean surface for the HAT-TAC™ to stick onto. Our recommendation is to find a smooth clean surface with little texture. * After prepping the surface: Grab the tab sticking out and peel away the red backing with ease. HAT-TAC™ attaches to the wall using a foam medium hold double sided adhesive. * Position: Align your HAT-TAC™ a few centimeters off the wall, making sure to the top so is perfectly level. * Last step: Push softly, just enough to hold the HAT-TAC™ in place on the surface. Take a few steps back to make sure it is exactly where you want it positioned. If the positioning is perfect, push and hold the back side of the HAT-TAC™ to the wall firmly for 30 seconds then wait 30 minutes before hanging a hat. Manufacturer Instructions for How to Remove: * Step One: Firmly grab each side of the HAT-TAC™ with both hands. * Step Two: Slowly wiggle the HAT-TAC™ up and down to separate the adhesive back from the wall. Be careful during this step as removing too fast or incorrectly could peel paint. FINAL SALE |
Close
|
Ocho Rios 6X Fur Felt Cattleman Western Hat |
---|
Made in the USA Part of the George Strait Collection by Resistol, the Ocho Rios 6X Fur Felt Cattleman Western Hat is a premium hat for any George Strait fan. Made in the USA of 100% fur felt, you can feel the spirit of the 'King of Country' in every inch of this western hat. Features a cattleman crown and a dramatically curved brim. The body is stiff and the crown is decorated with a patterned hat band. A metal bar accent with George Strait's signature of approval also adorns the Ocho, can it get any more American country over here! Approx. 4" Cattleman Crown 4 1/4" Curved Brim Made of: 100% Fur Felt Made in the USA 6X Grade Fur Felt George Strait Collection Firm/Stiff Body Decorative Hat Band George Strait's Signature Metal Bar Raw Edge on Brim Genuine Leather Sweatband Satin Lining Size(s): 6 7/8 (S) through 7 3/4 (XXL); fits true to size. |
Close
|
Polka Dot 3-Pleat Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring classic white polka dots against black, brown or navy, the Polka Dot 3-Pleat Puggaree Hat Band by Capas Headwear will add a fresh new twist to your favorite hat. For best results, please follow all instructions for use (below). Approx. 26 1/2" Total Length, End to End 1 7/8" Width Made of: 100% Cotton 3-Pleat Puggaree Hat Band Cotton Twill Fabric Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Starburst 3-Pleat Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a great new starburst print in varying colors, the Starburst 3-Pleat Puggaree Hat Band by Capas Headwear will give a colorful new twist to your favorite hat. Approx. 29" Total Length, End to End 1 7/8" Width Made of: 100% Polyester Instructions for Use: * Fasten the unfinished end of the pug band on the lower left side of the crown. * Wrap hatband around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hatband closest to the base of the crown. *Traditionally, men's hatbands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! |
USA: 1-888-VHS-HATS (1-888-847-4287)
INT'L: +1 619-906-4440 Se habla español
Shop for Hats at VillageHatShop.com | Privacy Policy | Website Accessibility | Site Map
Copyright © 1999-2020 Village Hat Shop: The #1 Source for Hats Online
*ALL SPECIAL OFFERS AND DISCOUNTS
Excludes wholesale/B2B, Certain Brand Restrictions, Special Orders or Where Otherwise Noted.
CONTACT USWe are happy to help! |
1 (888) 847-4287Mon-Sun 8am-4:00pm |