Close
|
Packable Cotton Twill Safari Fedora Hat |
---|
Please Note: This style runs large, see sizing breakdown below or call 1-888-847-4287 for help with sizing. M = 7 3/8 L = 7 1/2 - 7 5/8 XL = 7 3/4 - 7 7/8 2XL = 7 7/8 -8 3XL = 8+ UPF 50+ Sun Protection Do you remember your all-time favorite hat? Beat and rumpled, you put it on and felt like Indiana Jones. This is that hat, only nice and clean. The Scala Packable Washed Twill Safari Fedora Hat shows up pre-rumpled and soft as if you've owned it for years. Approx. 4" Center Pinch Crown 2 1/4" Downturned Brim Made of: 100% Washed Cotton Twill Waxed Cotton Hat Band Two Side Eyelets for Ventilation Cotton Twill Sweatband Unlined Packable Lightweight Sizes: M - 3XL (Khaki) and M - XL (Olive); runs large, please see disclaimer at top. |
Close
|
3-Pleat Cotton Puggaree Hat Band |
---|
A new hat band can do wonders to freshen up any old hat, may we suggest the 3-Pleat Cotton Puggaree Hat Band by Capas Headwear. Featuring a multitude of great colors, this pug hat band is made of 100% cotton. Need to dress your hat up in something new? Look no further than the 3-Pleat Cotton Puggaree Hat Band - a fresh new look to your favorite hat! For best results, please follow all instructions for use (below). *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. Approx. 28" Total Length, End to End 1 7/8" Width Made of: 100% Cotton 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! |
Close
|
3-Pleat Satin Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a multitude of great colors, the 3-Pleat Satin Puggaree Hat Band will give a fresh new look to your favorite hat. For best results, please follow all instructions for use (below). Approx. 28" Total Length, End to End 2" Width Made of: 100% Satin 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Paisley 3-Pleat Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a classic paisley print in varying colors, the Paisley 3-Pleat Puggaree Hat Band by Capas Headwear will give a colorful new twist to your favorite hat. For best results, please follow all instructions for use (below). Approx. 29" Total Length, End to End 1 7/8" Width Made of: 100% Polyester 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Weathered UPF 50+ Cotton Outback Hat |
---|
Please Note: This style runs 1cm large in each size. If you have any questions about how to order your correct size, please call us at 1-888-847-4287. UPF 50+ Sun Protection Heat up the season and be a bit more rebellious with the Dorfman Pacific Outback. The weathered outback serves a style that you've got things under control and you know which route you're taking. This best seller is rated UPF 50+ Sun Protection and is paired with a shapeable brim. Approx. 4 1/2" Teardrop Crown 2 3/4" Wired Shapeable Brim Made of: 52% Cotton 48% Polyester UPF 50+ Sun Protection Rating Self-Fabric Chin Cord Ventilation Eyelets Size(s): S, M, L, XL, XXL and XXXL; runs large. Please see sizing disclaimer at top of description. |
Close
|
Sou'Wester Rain Hat |
---|
The Sou'wester Rain Hat is iconic, it conjures up images of inclement weather and rough seas. Historians believe the name of the hat is based upon the Sou'wester winds, encountered mostly in the seas of United Kingdom. Wear the Sou'wester Rain Hat and dress up as: Paddington Bear, Gorton's Fisherman, or as Ben (the fisherman from I Know What You Did Last Summer). Kathy Jeanne has produced their Sou'wester Rain Hat, using the traditional silhouette: * Wide brim in the front to keep rain out of your eyes, but narrow enough so strong winds will cause the brim to cover your eyes. Turn up the front brim to create a rain gutter. * Long brim in the back to ensure rain doesn't hit the back of your neck and down into your coat. * Earflap to cover your ears for warmth. * Chin cord to secure the hat in windy conditions. Get ready for rainy weather with the Kathy Jeanne Sou'wester Rain Hat!! Approx. 5" Six Panel Round Crown 3" Downturned Brim - Front and Sides 4 1/2" Downturned Brim - Back Made of: 65% Polyester 35% Cotton Packable Cotton Twill Lining Self-Fabric Chin Cord with Plastic Toggle Cotton Twill Lined Foldable Internal Neck and Ear Protection Flap Water Repellent Sizes: One Size Fits most - fits up to size 7 1/2 (XL) comfortably. |
Close
|
Firework Horsehair Mesh and Feather Fascinator Hat |
---|
Seal the deal on your dressy look with the Firework Horsehair Mesh and Feather Fascinator Hat by Kathy Jeanne. Made of light-as-air horsehair mesh, the Firework Fascinator is a breeze to wear - simply attach to your hair via the discreet hair comb and done! Available in a rainbow of colors ideal for spring and summer, there is sure to be one (or more) that suit your look. Be the belle of the ball with the Firework Horsehair Mesh and Feather Fascinator by Kathy Jeanne! Approx. 13" Diameter (at Widest Point) 3 1/2" Height Made of: 100% Nylon Horsehair Mesh Tonal Straw Base Disc with Hair Comb Tonal Horsehair Pinched Disc Tonal Accent Loops Tonal Accent Feathers Lightweight Size(s): One Size Fits Most. Use provided hair comb to attach to hair. |
Close
|
Velvet Band Wool Felt Asymmetrical Cloche Hat - Made to Order |
---|
MADE TO ORDER. This Item Takes 5 to 7 business days to make before it will ship. Made in the USA Style and class come together to form the Velvet Band Wool Felt Asymmetrical Cloche Hat from Kathy Jeanne. This fashionable cloche features a velvet hat band and bow, as well as a darling pearl hat pin. The unlined interior is comfortable, just like the grosgrain ribbon sweatband. Approx. 5 1/2" Round Crown 2 3/4" Downturned Brim - Front 5" Downturned Brim - Right Side 2 1/2" Downturned Brim - Left Side 1 3/4" Downturned Brim - Back Made of: 100% Wool Felt Made in the USA Hand-Blocked and Sewn Velvet Hat Band and Bow Pearl Hat Pin Adjustable Drawstring Grosgrain Ribbon Sweatband Unlined Size: One Size Fits Most - Fits up to size 7 1/8 (M) comfortably; adjustable drawstring sweatband for comfortable fit. |
Close
|
Summit Ribknit Radar Cap Beanie Hat |
---|
This historical silhouette is also known as a Jeep Cap, a style that originated during WWII. Dorfman Pacific Company has updated the hybrid design of beanie/ball cap with the Summit Ribknit Radar Cap Beanie Hat. The rib-knit crown hugs your head and keeps you warm. The vegan suede bill/visor helps to shield the sun from your eyes and to reduce any glare from surrounding surfaces. The Summit Ribknit Radar Cap is not only practical, but fashionable too. Approx. 7 1/2" Height - Flat 2" Pre-Curved Bill/Visor Made of: 65% Acrylic 35% Wool 6-Seam Crown Rib-Knit Body Vegan Suede Bill/Visor Cuffed Rubberized Logo Unlined Size(s): One Size Fits Most. Fits up to size 7 3/4 (XXL) comfortably. |
USA: 1-888-VHS-HATS (1-888-847-4287)
INT'L: +1 619-906-4440 Se habla español
Shop for Hats at VillageHatShop.com | Privacy Policy | Website Accessibility | Site Map
Copyright © 1999-2020 Village Hat Shop: The #1 Source for Hats Online
*ALL SPECIAL OFFERS AND DISCOUNTS
Excludes wholesale/B2B, Certain Brand Restrictions, Special Orders or Where Otherwise Noted.
CONTACT USWe are happy to help! |
1 (888) 847-4287Mon-Sun 8am-4:00pm |