Close
|
TWS1 Paddler Hat - Stone |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection You're ready for any adventure with the TWS1 All Weather Hat from Tilley! This outdoor hat is perfect for any trek, in or out of water. The TWS1 All Weather Hat is ready keep you comfortable with the Schoeller 3x dry fabric C-Change membrane to control temperature when out in the sun, wind, and rain. The best part? It's also very comfortable! Approx. 3 1/4" Crown 2 3/4" Front/Back Brim 2 3/8" Side Brim Made of: 73% Polyester Schoeller® Technologies ecorepel® 27% Polyurethane Schoeller® Technologies ecorepel® Features: * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Underbrim reduces glare from most surfaces. * Wind stability through an extra stiff front brim & plastic wiring around the whole brim. * Keep it on in windy conditions through the wind cord & size cinch system. * Reflective yarns in the wind cords to increase visibility at dusk & dawn. * Secure your Hat while portaging with rear brim loop for clip - loop also holds wind cords when not in use. * Temperature is regulated with Schoeller® Fabric c_change® membrane. * Ventilation through a back vent & side grommets. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Lightweight, weighs 3.2 oz/91 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) finish. * Snap up sides for added wind stability & for added style. * Machine wash cool water, delicate cycle or hand wash; Reshape & air-dry. Size(s): 7 (M) - 7 7/8 (XXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
TWS1 All Weather Hat - Gray |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection You're ready for any adventure with the TWS1 All Weather Hat from Tilley! Canadian-made, this outdoor hat is perfect for any trek, in or out of water. The TWS1 All Weather Hat is ready keep you comfortable with the Schoeller 3x dry fabric C-Change membrane to control temperature when out in the sun, wind, and rain. The best part? It's also very comfortable! Approx. 3 1/4" Crown 2 3/4" Front/Back Brim 2 3/8" Side Brim Made of: 73% Polyester Schoeller® Technologies ecorepel® 27% Polyurethane Schoeller® Technologies ecorepel® Features: * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Underbrim reduces glare from most surfaces. * Wind stability through an extra stiff front brim & plastic wiring around the whole brim. * Keep it on in windy conditions through the wind cord & size cinch system. * Reflective yarns in the wind cords to increase visibility at dusk & dawn. * Secure your Hat while portaging with rear brim loop for clip - loop also holds wind cords when not in use. * Temperature is regulated with Schoeller® Fabric c_change® membrane. * Ventilation through a back vent & side grommets. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Lightweight, weighs 3.2 oz/91 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) finish. * Snap up sides for added wind stability & for added style. * Machine wash cool water, delicate cycle or hand wash; Reshape & air-dry. Sizes: 7 (M) - 7 7/8 (XXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
TWS1 All Weather Hat - Blue |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection You're ready for any adventure with the TWS1 All Weather Hat from Tilley! This outdoor hat is perfect for any trek, in or out of water. The TWS1 All Weather Hat is ready keep you comfortable with the Schoeller 3x dry fabric C-Change membrane to control temperature when out in the sun, wind, and rain. The best part? It's also very comfortable! Approx. 3 1/4" Crown 2 3/4" Front/Back Brim 2 3/8" Side Brim Made of: 73% Polyester Schoeller® Technologies ecorepel® 27% Polyurethane Schoeller® Technologies ecorepel® Features: * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Underbrim reduces glare from most surfaces. * Wind stability through an extra stiff front brim & plastic wiring around the whole brim. * Keep it on in windy conditions through the wind cord & size cinch system. * Reflective yarns in the wind cords to increase visibility at dusk & dawn. * Secure your Hat while portaging with rear brim loop for clip - loop also holds wind cords when not in use. * Temperature is regulated with Schoeller® Fabric c_change® membrane. * Ventilation through a back vent & side grommets. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Lightweight, weighs 3.2 oz/91 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) finish. * Snap up sides for added wind stability & for added style. * Machine wash cool water, delicate cycle or hand wash; Reshape & air-dry. Sizes: 7 (M) - 7 7/8 (XXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
Alison Faux Fur Pom Knit Beanie Hat |
---|
FINAL SALE A standard, thick pom beanie with a furry twist, we have Alison Faux Fur Pom Knit Beanie Hat by Brixton Hats. The Alison is super soft and cozy thanks to its thick, knitted design. To bump the coziness up a notch, a faux fur pom sits atop this Brixton Hats beanie. Pop it on this winter to add a little extra warmth to your outfit. Approx. 8" Height - Flat 6 7/8" Length - Flat Made of: 100% Acrylic Knitted Design Faux Fur Pom - Top Cuff Brixton Logo Side Tag Unlined Sizes(s): One Size Fits Most - Fits up to size 7 1/2 (XL) comfortably. FINAL SALE |
Close
|
Golf Ball Hat-Tac |
---|
FINAL SALE Made in the USA Never again worry about your hats becoming misshapen, sagging, or losing their curve, thanks to the Golf Ball Hat-Tac. This revolutionary invention sticks to any surface thanks to the 3M foam adhesive backing, and the fixed curve platform allows hats to comfortably rest in an upright position. With this patented and trademarked design, your ball cap, fedora, or any other piece of headwear will never lose its curve. This is the perfect place to hang your hat! Approx. 45.5 mm High 97 mm Wide 50 mm Deep Made in the USA 3M Foam Adhesive Backing Fixed Curve Platform Golf Ball and Putting Green Print Sturdy and Reliable Works for Hats of All Sizes Manufacturer Instructions for How to Apply: * Prep surface: Take a soft wash cloth with Isopropyl or similar alcohol cleaner to create a nice clean surface for the HAT-TAC™ to stick onto. Our recommendation is to find a smooth clean surface with little texture. * After prepping the surface: Grab the tab sticking out and peel away the red backing with ease. HAT-TAC™ attaches to the wall using a foam medium hold double sided adhesive. * Position: Align your HAT-TAC™ a few centimeters off the wall, making sure to the top so is perfectly level. * Last step: Push softly, just enough to hold the HAT-TAC™ in place on the surface. Take a few steps back to make sure it is exactly where you want it positioned. If the positioning is perfect, push and hold the back side of the HAT-TAC™ to the wall firmly for 30 seconds then wait 30 minutes before hanging a hat. Manufacturer Instructions for How to Remove: * Step One: Firmly grab each side of the HAT-TAC™ with both hands. * Step Two: Slowly wiggle the HAT-TAC™ up and down to separate the adhesive back from the wall. Be careful during this step as removing too fast or incorrectly could peel paint. FINAL SALE |
Close
|
Kit Pom Knit Beanie Hat |
---|
FINAL SALE A standard pom beanie with striped detailing and embroidered Brixton logo, we have Kit Pom Knit Beanie Hat by Brixton Hats. The Kit is super soft and cozy thanks to its thick, knit design. To bump the coziness up a notch, a yarn pom sits atop this Brixton beanie. Pop it on this winter to add a little extra warmth to your outfit. Approx. 9 1/8" Height - Flat 7 3/4" Length - Flat 3 1/4" Cuff - Flat Made of: 100% Acrylic Yarn Pom - Top Classic Cuff Brixton Logo Embroidered Patch Unlined Sizes(s): One Size Fits Most - Fits up to size 7 1/2 (XL) comfortably. FINAL SALE |
Close
|
Fender Sonic Acrylic Knit Beanie Hat |
---|
Brixton introduces the Fender Sonic Acrylic Knit Beanie Hat, part of their Brixton X Fender® Collection, an ode to American music and music icons through the ages. The Fender Sonic Beanie features a tight knit weave, jacquard stripe pattern and Fender® logo, and classic cuff design. Its double-wall construction provides extra warmth while its reversible Brixton logo tab makes it easy to wear both cuffed or uncuffed. A little retro and very rock 'n roll, this beanie infuses personality to any look! Approx. 8 3/4" Length (Flat) 3" Cuff Made of: 100% Acrylic Brixton X Fender® Collection Tight Knit Weave Jacquard Stripe Pattern Jacquard Fender® Logo Reversible Brixton Logo Tab Wear Cuffed or Uncuffed Double Wall Construction Size(s): One Size; Stretches to fit up to size 7 3/4 (XXL) comfortably. |
USA: 1-888-VHS-HATS (1-888-847-4287)
INT'L: +1 619-906-4440 Se habla español
Shop for Hats at VillageHatShop.com | Privacy Policy | Website Accessibility | Site Map
Copyright © 1999-2020 Village Hat Shop: The #1 Source for Hats Online
*ALL SPECIAL OFFERS AND DISCOUNTS
Excludes wholesale/B2B, Certain Brand Restrictions, Special Orders or Where Otherwise Noted.
CONTACT USWe are happy to help! |
1 (888) 847-4287Mon-Sun 8am-4:00pm |