Close
|
3-Pleat Cotton Puggaree Hat Band |
---|
A new hat band can do wonders to freshen up any old hat, may we suggest the 3-Pleat Cotton Puggaree Hat Band by Capas Headwear. Featuring a multitude of great colors, this pug hat band is made of 100% cotton. Need to dress your hat up in something new? Look no further than the 3-Pleat Cotton Puggaree Hat Band - a fresh new look to your favorite hat! For best results, please follow all instructions for use (below). *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. Approx. 28" Total Length, End to End 1 7/8" Width Made of: 100% Cotton 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! |
Close
|
Italian Straw Skimmer Hat |
---|
Made in Italy Although superseded by the Panama hat in this century, the Skimmer was for many decades the man's straw hat of choice. The Italian Skimmer by Capas is Made in Italy from 4-ply Koberg straw. This is an authentic, high quality Skimmer hat often assiciated with barber shop quartets, jazz bands, and the like. (Also known as a Boater or Sailor). Approx. 3 1/2" Flat Top Crown 2 1/4" Flat Brim Made of: 100% 4-Ply Koberg Straw Striped Hat Band with Side Bow Firm/Stiff Body Leather Sweatband Lined Sizes: Fitted - Sizes 6 7/8 (S) to 7 3/4 (XXL); fits true to size. |
Close
|
LTM6 Airflo Hat - Khaki/Olive |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection The Tilley LTM6 AIRFLO® Hat is made from a lightweight 100% recycled nylon with a UPF50+ rating. The bluesign® approved fabric provides excellent UV protection while the mesh surrounding the top of the crown allows for incredible breathability. Approx. 4 3/8" Crown 3 1/4" Front/Back Brim 2 1/2" Side Brim Made of: Body - 100% Recycled Nylon Mesh - 100% Polyester Features: * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Underbrim reduces glare from most surfaces. * Keep it on in windy conditions through the wind cord & size cinch system. * Secure your Hat during a steep incline with rear brim loop for clip - loop also holds wind cords when not in use. * Ventilation through mesh insert around the top of the crown. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Lightweight, weighs 4 oz/113 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) Finish. * bluesign® Approved Fabric. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Sizes: 6 7/8 (S) - 8+ (XXXL);Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
T3 Cotton Duck Booney Hat - Khaki |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection The T3 is the most sought after Tilley Hat - made of classic cotton duck canvas in the traditional "Aussie" style with a versatile snap-up brim. The original design has 40 years of history, make sure to pay homage with your very own T3. Approx. 4" Crown 2 3/4" Front/Back Brim 2 3/8" Side Brim Made of: 100% Cotton Duck Features: * Guaranteed for life. * Certified sun protection - delivers an UPf of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Keep it on in windy conditions through the wind cord & size cinch system. * Secure your Hat during a steep incline with rear brim loop for clip - loop also holds wind cords when not in use. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Buoyancy - stays afloat in water. * Weighs 5.4 oz/153 grams. * DWR (Durable Water Repellent) Finish. * British brass grommets. * OEKO-TEX® Certification. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Sizes: 6 7/8 (S) - 7 7/8 (XXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
3-Pleat Satin Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a multitude of great colors, the 3-Pleat Satin Puggaree Hat Band will give a fresh new look to your favorite hat. For best results, please follow all instructions for use (below). Approx. 28" Total Length, End to End 2" Width Made of: 100% Satin 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Paisley 3-Pleat Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a classic paisley print in varying colors, the Paisley 3-Pleat Puggaree Hat Band by Capas Headwear will give a colorful new twist to your favorite hat. For best results, please follow all instructions for use (below). Approx. 29" Total Length, End to End 1 7/8" Width Made of: 100% Polyester 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Heritage Collection 1940s Pork Pie Hat |
---|
Made in the USA A standard during Jazz's glory age, the Pork Pie gained relevance during a time of worldly transition, as evidenced by its growing popularity among celebrities and public figures. Physicist Robert Oppenheimer regularly wore a pork pie hat during his field studies. Jamaican ska artist Laurel Aitken even wrote the tune "Give Me Back My Pork Pie Hat" as a tribute. Its namesake inspired by the British delicacy, the Pork Pie's distinctive dents around the crown and low flat top was a comfortable look in an unsettling time. Dozens of Bollman Hat Company employees gave their lives serving their country in World War II. The third generation of Bollman family now led the Company and kept in touch with employees serving in the military, and provided regular updates to it's workforce at home on those lost in action, in captivity, injured and those returning home. Some of these letters have been preserved and hang in the hall of the Company's main office today. Approx. 3 1/2" Telescope Crown 2" Underwelt Snap Brim Made of: 100% Wool Felt Printed Leather Sweatband Custom 140th Lining Sizes: S, M, L, and XL; fits true to size. |
Close
|
LTM5 Airflo Hat - Stone |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection The Tilley LTM5 AIRFLO® Hat is designed with a medium brim and polyester mesh in the crown for coolness and comfort during hot days and strenuous activities. The LTM5 AIRFLO® is similar to the LTM6 but has a slimmer profile but the same water repellent finish. Approx. 3 3/4" Crown 2 5/8" Front Brim 2 3/4" Back Brim 2 1/8" Side Brims Made of: Body - 100% Nylon Mesh - 100% Polyester Features: * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks. 98% of harmful UVA/UVB radiation. * Keep it on in windy conditions through the wind cord & size cinch system. * Secure your Hat during a steep incline with rear brim loop for clip - loop also holds wind cords when not in use. * Ventilation through mesh insert around the top of the crown. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Weighs 3 oz/85 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) Finish. * bluesign® Approved. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Sizes: 6 7/8 (S) - 8+ (XXXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
TH5 Hemp Hat |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection Made in Canada The TH5 Hemp Hat from TIlley Endurables is natural and tough, built for endurance and longevity. Hemp fabric is very much like cotton, so it breathes extremely well. The nature of this fabric is that it does fade with continuous sun exposure, creating a more unique hat as time goes by. Approx. 3 3/4" Crown 2 5/8" Front Brim 2 3/4" Back Brim 2 1/8" Side Brims Made of: 100% Hemp Fabric Features: * Made in Canada. * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks. 98% of harmful UVA/UVB radiation. * Keep it on in windy conditions through the wind cord & size cinch system. * Secure your Hat during a steep incline with rear brim loop for clip - loop also holds wind cords when not in use. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Weighs 5 oz/150 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) Finish. * OEKO-TEX® certification. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Sizes: 7 (M) - 7 7/8 (XXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
Heritage Collection 1910s Montana Peak Campaign Wool Felt Hat |
---|
Made in the USA The 1910's saw the advent of a true piece of Americana in the Montana Peak Hat (Campaign Hat). Its popularity "peaked" on September 8th, 1911 when it was adopted by the United States Army. What began as a military standard has since become a symbol of both protection and conservation as uniforms of state troopers and park rangers nationwide. The Montana Peak has run the gamut from civic service to the great outdoors. And as the Great War loomed, the Bollman Hat Company produced these hats in abundance for the U.S. Army. These historical hats are still produced by Bollman today. Approx. 5" Montana Peak Crown 3" Flat Brim Made of: 100% Wool Felt Made in the USA Grosgrain Ribbon Hat Band with Side Bow Badge/Ventilation Eyelets Leather Chincord Printed Leather Sweatband Raw Edge Brim Custom 140th Lining Sizes: S, M, L, and XL; fits true to size. |
Close
|
Heritage Collection 1920s Fedora Hat |
---|
Made in the USA The "Roaring Twenties", as the decade is affectionately dubbed, saw an explosion of rich cultural activity, brought on by unprecedented economic prosperity. Gangsters, flappers, speakeasies, jazz and the Charleston were sweeping the nation. Fashion likewise grew by leaps and bounds during this time, as the public became less and less inhibited by prior social standards. People were finally "letting loose" by donning such aesthetically-audacious ensembles. The term Fedora was in use as early as 1891 but the style really took off in the Twenties, topping off men's fashion during a golden age. The Fedora featured a pinched crown with the brim turned down in the front and up in the back. This complimented the women's Cloche style. Indeed, blithe indulgence marked this decade. And once again, Bollman was there indulging hat lovers with headwear that made a personal fashion statement and truly captured the exuberance of America at the time. The Fedora has evolved and endured and Bollman has produced more varieties of the Fedora than any other style in it's history. Approx. 4" Center Pinch Crown 2 1/2" Underwelt Brim Made of: 100% Wool Felt Printed Leather Sweatband Custom 140th Lining Sizes: S, M, L, and XL; fits true to size. |
Close
|
T3 Cotton Duck Booney Hat - Natural |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection The T3 is the most sought after Tilley Endurables hat, the originale with 40 years of history to back it up. Made of classic cotton duck canvas in the unique booney style with a versatile snap-up brim. Approx. 4" Flat Crown 2 3/4" Brim - Front & Back 2 3/8" Brim - Sides Made of: 100% Cotton Duck Features: * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Keep it on in windy conditions through the wind cord & size cinch system. * Secure your Hat during a steep incline with rear brim loop for clip - loop also holds wind cords when not in use. * Hydrofil® anti-sweat band to wick away moisture. * Weighs 5.4 oz/153 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) Finish. * Double Snap-Up Brim. * British Brass Grommets. * OEKO-TEX® certification. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Size(s): 6 7/8 (S) - 8+ (XXXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
LTM6 Airflo - Olive Green |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection The Tilley LTM6 AIRFLO® Hat is made from a lightweight 100% recycled nylon with a UPF50+ rating. The bluesign® approved fabric provides excellent UV protection while the mesh surrounding the top of the crown allows for incredible breathability. Approx. 4 3/8" Crown 3 1/4" Front/Back Brim 2 1/2" Side Brim Made of: Body - 100% Nylon Mesh - 100% Polyester Features: * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Underbrim reduces glare from most surfaces. * Keep it on in windy conditions through the wind cord & size cinch system. * Secure your Hat during a steep incline with rear brim loop for clip - loop also holds wind cords when not in use. * Ventilation through mesh insert around the top of the crown. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Lightweight, weighs 4 oz/113 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) finish. * bluesign® Approved. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Sizes: 6 7/8 (S) - 8+ (XXXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file an insurance claim, please click here to be directed to the Tilley returns and exchange page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
LTM5 Airflo Hat - Olive Green |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection The Tilley LTM5 AIRFLO® Hat is designed with a medium brim and polyester mesh in the crown for coolness and comfort during hot days and strenuous activities. The LTM5 AIRFLO® is made with durable nylon fabric with a water repellent finish. Approx. 3 3/4" Crown 3 1/4" Front Brim 3" Back Brim 2 1/4" Side Brims Made of: Body - 100% Nylon Mesh - 100% Polyester Features: * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks. 98% of harmful UVA/UVB radiation. * Underbrim reduces glare from most surfaces. * Keep it on in windy conditions through the wind cord & size cinch system. * Secure your Hat during a steep incline with rear brim loop for clip - loop also holds wind cords when not in use. * Ventilation through mesh insert around the top of the crown. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Weighs 3 oz/85 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) Finish. * bluesign® Approved. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Sizes: 6 7/8 (S) - 8 (XXXL);Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
Waterproof Rain Hat |
---|
Please Note: Sizes run small. See below or call us at 1-888-847-4287 for help with sizing. S = 6 3/4 M = 7 L = 7 1/4 XL = 7 1/2 UPF 50+ Sun Protection Tilley Endurables has taken the basic boonie to the next level with the Waterproof Rain Hat. The seam sealed construction makes this hat rain proof and wind proof, a double whammy when it comes to inclement weather. The snap-up sides help for a more streamlined silhouette and the adjustable reflective wind cord allows for a custom fit. Approx. 3 1/2" Crown 2 1/2" Front/Back Brim 2 1/4" Side Brim Made of: 73% Polyester 27% Polyurethane Features: * Designed in Canada. * UPF 50+ Sun Protection - Tested and Certified. * Rain and Wind Proof - Moisture Wicking and Durable Water Repellency. * DWR (Durable Water Repellent) finish. * Seam Sealed. * Keep it on in windy conditions through the wind cord & size cinch system. * Reflective yarns in the elasticized wind cords to increase visibility at dusk & dawn. * Adjustable Wind Cord with Metal Toggle - For Windy Conditions * Secure your Hat while portaging with rear brim loop for clip - loop also holds wind cords when not in use. * Temperature is regulated with Schoeller® Fabric c_change® membrane. * Hydrofil® anti-sweat band to wick away moisture. * Quick Drying. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Buoyancy - stays afloat in water. * Snap up sides for added wind stability & for added style. * Mesh Lining. * Machine wash cool water, delicate cycle or hand wash; Reshape & air-dry. * Tilley Side Tag. Size(s): S, M, L, and XL; ; runs small, please see disclaimer at the top of the product description. |
Close
|
Leather Greek Fisherman's Cap |
---|
Made in Greece Capas Headwear is giving the fisherman's cap some street credit with a leather body in their latest fall headpiece, the Leather Greek Fisherman's Cap. Made of genuine leather, details include a double-layered cord hat band, decorative bill accent, leather sweatband and satin lining. A practical design this cap is dressed up for a night on the town. Approx. 1 7/8" Soft Crown 3/4" Structured Band 2 1/8" Bill/Visor Made of: 100% Leather Double-Layered Cord Hat Band Leather Side Buttons Decorative Bill Accent Leather Sweatband Satin Lining Sizes: S, M, L and XL; fits true to size. |
Close
|
Heritage Collection 1950s Roy |
---|
Made in the USA The King of the Cowboys, Roy Rogers, was a famous singer and cowboy actor during the days of television. He and his third wife Dale Evans (the Queen of the West), his golden palomino Trigger, and his German Shepard Bullet, were featured in over one hundred movies and The Roy Rogers Show which ran on radio for nine years before moving to television from 1951 through 1957. In post-war America, Roy was the embodiment of the western hero. For the Bollman Hat Company, he was a champion of headwear on both the big and small screen. Roy Rogers visited the Bollman factory in 1960 to express gratitude to Bollman Employees for providing him with his signature hat. It was quite a day in Adamstown as Rogers was a beloved figure. Upon addressing the employees, Roy toured the factory, signed autographs and posed with children from the community. Approx. 4 5/8" C-Crown (Teardrop) 4" Raw Edge Curled Brim Made of: 100% Wool Felt Printed Leather Sweatband Custom 140th Lining Hat Box and Certificate Included Sizes: S, M, L, and XL; fits true to size. |
Close
|
T4MO Hikers Hat |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection You're ready for any adventure with the T4MO Hiker's Hat from Tilley! This outdoor hat is perfect for any trek along the trails, where your trusty hiking hat and boots lead you to a memorable adventure. The T4MO Hiker's Hat is ready to protect you from sun, wind, and rain. The best part? It's also very comfortable! The HyperKewl™ evaporative crown insert will help to provide temperatures that are approx. 10 to 15 degrees Fahrenheit cooler than ambient temperature; keeping you cool through those summer hikes. Approx. 4" Ventilated Crown 3 1/2" Front/Back Brim 2 1/2" Side Brim Made of: 98% Organic Cotton 2% Spandex HyperKewl™ Evaporative Insert: 100% polyester mesh on the outside; interior is 53% polymer fibres; 47% cellulose fibres. Features: * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Underbrim reduces glare from most surfaces. * Keep it on in windy conditions through the wind cord & size cinch system. * Secure your Hat during a steep incline with rear brim loop for clip - loop also holds wind cords when not in use. * Ventilation through mesh insert around the top of the crown. * Hydrofil® anti-sweat band to wick away moisture. * Lightweight, weighs 3.7 oz/108 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) Finish. * bluesign® Approved. * OEKO-TEX® Certification. * Pocket in crown holds the insert and is made with mesh to help increase airflow for maximum evaporation, when HyperKewl™ is not in use, the pocket in the crown can be used to carry ID, cash or credit card. * Temperature is regulated with HyperKewl™ Evaporative cooling insert: it absorbs & slowly releases water through evaporation to help ‘super charge’ the body’s natural cooling process. * How to use your HyperKewl™ Evaporative Insert: Soak the insert in cold water for up to 5 minutes – insert into the Hat. The airflow through the mesh panel will start the evaporative cooling process. The cooling insert is expected to provide temperatures that are approx. 10 to 15 degrees Fahrenheit cooler than ambient temperature depending on airflow. It will not feel like an air-conditionner on your head – it will super charge the natural evaporation process to help you feel comfortable on the trail. High humidity will diminish the fabric’s ability to evaporate water. * Remove HyperKewl™ insert before washing hat. Machine wash hat in cool water, delicate cycle or hand wash; Reshape & air-dry. Do not iron. Do not dry clean. Sizes: 7(M) - 7 7/8 (XXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
Heritage Collection 1900s Homburg |
---|
Made in the USA About the time of Bollman Hat Company's Founder's death in 1900 and beginning of the leadership of his son George W. Bollman, the Homburg hat was taking its place in hat style history. Popularized in England by Edward VII after visiting Germany and bringing one back as a keepsake, the Homburg is one of the oldest formally-styled hats. As the King of England from 1901 to 1910, Edward was known as "The Peacemaker" for his efforts in fostering good relations between England and other European countries. Perhaps the Homburg was a perk of the King's diplomatic successes, but the style enjoyed its own surprising success in Great Britain and in America. The Homburg resurfaced in the 1970's as the "Godfather" and eventually became an early staple of the hip-hop movement. The Bollman Hat Company contributed its own color and flair during each phase of the Homburg's evolution. Bollman was integral to developing the style's current counter-cultural appeal by creating a variety of diverse colors including sugar pink, burnt orange, lime green and lemon yellow. Approx. 4 1/4" Center Dent Crown 2 3/4" Curled Brim Made of: 100% Wool Felt Printed Leather Sweatband Custom 140th Lining Sizes: S, M, L, and XL; fits true to size. |
Close
|
Midsize Visor - Solid |
---|
Made in the USA Get the sun out of your eyes in style with the Solid Midsize Visor by No Headache. Featuring their patented No Headache design, the Solid Midsize Visor fits most women and is designed to avoid the headaches usually associated with visors. Approx. 4" Visor/Bill Made of: Plastic Frame Visor & Underside Fabric - 100% Polyester Spandex Microsuede Arm Fabric - 100% Neoprene UPF 50+ Sun Protection No Headache Patented Design Sustainable Recycled Plastic Inner Frame Quick Drying High-Tech Poly/Spandex Microsuede Fabric Black Underside - Reduces Glare Lightweight Size: One Size Fits Most - Fits up to size 7 1/4 (L) comfortably. |
Close
|
Heritage Collection 1860s Wide Awake Wool Felt Hat |
---|
Made in the USA Bollman Hat Company digs deep into the annals of its history to capture and commemorate this long forgotten style. The Wide Awake hat was inspired by the paramilitary campaign organization of the 1860s. The Wide Awakes, affiliated with the Republican Party during the 1860 election, supported Abraham Lincoln and the Union while strongly opposing slavery. The Wide Awakes were well-drilled and served as political police in escorting party speakers and in preserving order at party demonstrations and had over 400,000 estimated members. The standard Wide Awake uniform consisted of a full robe or cape, a torch, and of course the black hat for which we pay tribute. The Bollman Hat Company produced this hat and all of their hats in black only when George Bollman and Isaac Sowers first opened their hat factory in Adamstown, Pennsylvania in 1868. Approx. 3 1/2" Curled Brim 4" Round Crown Made of: 100% Wool Felt Made in the USA Grosgrain Ribbon Hat Band Grosgrain Ribbon Bound Brim Printed Leather Sweatband Custom 140th Lining Sizes: S, M, L and XL; fits true to size. |
Close
|
Seagrass Straw Ascot Cap |
---|
Please Note: This style runs large, see sizing details below or call us at 1-888-847-4287 for help with sizing. S = 7 M = 7 1/4 L = 7 1/2 XL = 7 3/4 Incredibly breathable and lightweight, the Seagrass Straw Ascot Cap by Capas Headwear is unique among straw caps. Featuring an open weave twisted seagrass straw body, this ascot provides shading from the sun while maximizing ventilation. Natural seagrass possesses wonderful color variation that gives the cap a uniquely organic and relaxed look. Approx. 10" Length 8" Width 2" Brim/Bill (Measured from size M) Made of: 100% Seagrass Straw Open Weave Twisted Seagrass Straw Body Cotton Sweatband Unlined Sizes: S, M, L and XL. Sizing runs large, see sizing disclaimer at top of description. |
Close
|
British Millerain Waxed Cotton Strapback Baseball Cap |
---|
UPF 50+ Sun Protection The British Millerain Waxed Cotton Strapback Baseball Cap is a classic 6-panel cap with some innovative twists by Tilley Endurables. With a UPF 50+ sun protection, this cap is water repellent thanks to the British Millerain waxed finish, and if that wasn't enough, it also features an adjustable leather strap for the perfect fit. Designed with comfort in mind, this cap also has a Tilley sweatband and smooth lining. Approx. 4" 6-Panel Crown 2 3/4" Curved Bill Made of: 100% British Millerain Waxed Cotton UPF 50+ Sun Protection Designed in Canada British Millerain Waxed Finish - Durable Water Repellent Top Button Adjustable Leather Strap - Back Tilley's Anti-Sweat Sweatband Inseam Taping Smooth Lining Size(s): S/M and L/XL; fits true to size. |
Close
|
TWS1 Paddler Hat - Stone |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection You're ready for any adventure with the TWS1 All Weather Hat from Tilley! This outdoor hat is perfect for any trek, in or out of water. The TWS1 All Weather Hat is ready keep you comfortable with the Schoeller 3x dry fabric C-Change membrane to control temperature when out in the sun, wind, and rain. The best part? It's also very comfortable! Approx. 3 1/4" Crown 2 3/4" Front/Back Brim 2 3/8" Side Brim Made of: 73% Polyester Schoeller® Technologies ecorepel® 27% Polyurethane Schoeller® Technologies ecorepel® Features: * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Underbrim reduces glare from most surfaces. * Wind stability through an extra stiff front brim & plastic wiring around the whole brim. * Keep it on in windy conditions through the wind cord & size cinch system. * Reflective yarns in the wind cords to increase visibility at dusk & dawn. * Secure your Hat while portaging with rear brim loop for clip - loop also holds wind cords when not in use. * Temperature is regulated with Schoeller® Fabric c_change® membrane. * Ventilation through a back vent & side grommets. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Lightweight, weighs 3.2 oz/91 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) finish. * Snap up sides for added wind stability & for added style. * Machine wash cool water, delicate cycle or hand wash; Reshape & air-dry. Size(s): 7 (M) - 7 7/8 (XXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
Samantha Braided Toyo Straw Western Hat |
---|
With the Samantha Braided Toyo Straw Western Hat, Cappelli Straworld has taken practical design to the next level. With an ultra-lightweight body thanks to the semi-ventilated body, this is the perfect hat for a hot day at the beach or by the pool. Also stylish thanks to an alternating braided design, this hat finishes off with a braided faux suede hat band and chin cord. Approx. 3 3/4" Center Pinch Crown 3 5/8" Wired Shapeable Brim Made of: 100% Toyo Straw Packable Semi-Ventilated Body Braided Toyo Straw Design Braided Faux Suede Hat Band and Chin Cord Aztec Patterned Pull on Chin Cord Cappelli Straworld Hat Pin Shapeable Brim Adjustable Drawstring Grosgrain Ribbon Sweatband Unlined Size(s): One Size Fits Most - Fits up to size 7 1/8 (M) comfortably; adjustable drawstring sweatband for comfortable fit. |
Close
|
LTM3 Airflo Hat - Khaki/Olive |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection The Tilley LTM3 AIRFLO® Hat offers the beloved shape of the T3 Hat with Tilley's incredibly lightweight and durable UPF 50+ nylon fabric with mesh ventilation around its crown for added breathability. Just like the T3, the LTM3 boasts a snap-up brim and classic "Aussie" styling. Approx. 4" Crown 2 3/4" Front/Back Brim 2 3/8" Side Brim Made of: Body - 100% Nylon Mesh - 100% Polyester Features: * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Underbrim reduces glare from most surfaces. * Keep it on in windy conditions through the wind cord & size cinch system. * Secure your Hat during a steep incline with rear brim loop for clip - loop also holds wind cords when not in use. * Ventilation through mesh insert around the top of the crown. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Weighs 4 oz/113 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) Finish. * bluesign® Approved. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Sizes: 6 7/8 (S) - 7 7/8 (XXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
TWC7 Wax Cotton Hat |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection Made in Canada Tilley has introduced new hats into their iconic line. We welcome the TWC7 Wax Cotton Hat, with a natural water repellent finish that develops it own unique character over time. The TWC7 hat is a stalwart as every Tilley is, indestructible, as well as being packable. The new color trim really sets this Tilley apart from its predecessors. Be protected while looking great all the while. Approx. 3 1/4" Crown 2 5/8” Brim - Front 2 3/4" Brim - Back 2 1/8" Brim - Sides Made of: 100% British Millerain Waxed Cotton Features: * Made in Canada. * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Keep it on in windy conditions through the wind cord & size cinch system. * Secure your Hat during a steep incline with rear brim loop for clip - loop also holds wind cords when not in use. * Water Repellent. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Weighs 5.4 oz/153 grams. * Buoyancy - stays afloat in water. * Machine wash delicate or hand wash cold. Use mild detergent. Do not use softeners or bleach. Remove windcord and foam from crown pocket before washing. Reshape and air dry. Do not iron. Do not dry clean. Sizes: 7(M) - 7 7/8 (XXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
Kids' Wool Felt C-Crown Trilby Fedora Hat |
---|
Whether you need it for a Halloween costume or a school play, or maybe your little one wants to start a trend. The wool felt C-Crown Stingy Brim Fedora is a scaled down version of a classic shape. Approx. 3 1/2" C-Crown (Teardrop) 1 1/4" Overwelt Stingy Brim Made of: 100% Wool Felt 1" Wide Grosgrain Ribbon Hat Band Vinyl sweatband Unlined Sizes: Child's S, M, L, and XL. Suggested for: Kids 2-10 Years Old (see chart below): Age Inches CMS Hat Size Size 1 - 2 years 18 7/8 48 6 Small 2 - 4 years 19 5/8 50 6 1/4 Medium 5 - 7 years 20 3/8 52 6 1/2 Large 8 - 10 years 21 1/8 54 6 3/4 X-Large |
USA: 1-888-VHS-HATS (1-888-847-4287)
INT'L: +1 619-906-4440 Se habla español
Shop for Hats at VillageHatShop.com | Privacy Policy | Website Accessibility | Site Map
Copyright © 1999-2020 Village Hat Shop: The #1 Source for Hats Online
*ALL SPECIAL OFFERS AND DISCOUNTS
Excludes wholesale/B2B, Certain Brand Restrictions, Special Orders or Where Otherwise Noted.
CONTACT USWe are happy to help! |
1 (888) 847-4287Mon-Sun 8am-4:00pm |