Close
|
Italian Straw Skimmer Hat |
---|
Made in Italy Although superseded by the Panama hat in this century, the Skimmer was for many decades the man's straw hat of choice. The Italian Skimmer by Capas is Made in Italy from 4-ply Koberg straw. This is an authentic, high quality Skimmer hat often assiciated with barber shop quartets, jazz bands, and the like. (Also known as a Boater or Sailor). Approx. 3 1/2" Flat Top Crown 2 1/4" Flat Brim Made of: 100% 4-Ply Koberg Straw Striped Hat Band with Side Bow Firm/Stiff Body Leather Sweatband Lined Sizes: Fitted - Sizes 6 7/8 (S) to 7 3/4 (XXL); fits true to size. |
Close
|
3-Pleat Cotton Puggaree Hat Band |
---|
A new hat band can do wonders to freshen up any old hat, may we suggest the 3-Pleat Cotton Puggaree Hat Band by Capas Headwear. Featuring a multitude of great colors, this pug hat band is made of 100% cotton. Need to dress your hat up in something new? Look no further than the 3-Pleat Cotton Puggaree Hat Band - a fresh new look to your favorite hat! For best results, please follow all instructions for use (below). *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. Approx. 28" Total Length, End to End 1 7/8" Width Made of: 100% Cotton 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! |
Close
|
Brushed Twill MidPro FlexFit Fitted Baseball Cap |
---|
The traditional 6-panel baseball cap has a fused buckram skeleton that forms the rounded athletic crown. Spandex has been woven into the brushed cotton twill baseball cap to allow for maximum stretch and comfort. Each panel has a tonal thread sewn eyelet for ventilation. The inner elasticized sweatband stretches for fit, just like the cap. The fabric color under the bill/visor is a neutral gray. Each FLEXFIT baseball cap has the permacurv® bill/visor, so all the customizing work has been done and all you have to do is simply wear the cap! Approx. 3 1/2" Crown 2 3/4" Bill/Visor Made of: 98% Cotton 2% Spandex 6-Panel Design Buckram-Supported Front Panels (2) Top Button Sewn Eyelets Closed Back - Stretches to Fit Gray Undervisor Elastic Sweatband Unlined Sizes: S/M fits sizes 6 3/4 (XS) - 7 1/8 (M); L/XL fits sizes 7 1/4 (L) - 7 5/8 (XL). For Bulk/Wholesale Purchase of this hat CLICK HERE or call us at 1-888-847-4287. |
Close
|
TY Cotton Twill MidPro FlexFit Fitted Baseball Cap |
---|
The traditional 6 panel baseball cap has a fused buckram skeleton that forms the rounded athletic crown. Complete with spandex woven into the cotton twill baseball cap, the FlexFit Mid-Pro Baseball Cap is extremely comfortable with a little stretch. Limited supply at this price. Don't be last to the party, get the FlexFit Mid-Pro Cotton Twill Baseball Cap while supplies lasts! Approx. 3 1/2" Crown 2 3/4" Bill/Visor Made of: 98% Cotton 2% Spandex 6-Panel Construction Sewn Eyelets for Ventilation Elasticized Sweatband Closed Back - Stretches to Fit Gray Undervisor Unlined Size: L/XL fits sizes 7 1/4 (L) - 7 5/8 (XL). For Bulk/Wholesale purchase of this hat, CLICK HERE or call us at 1-888-847-4287. |
Close
|
Garment Washed Twill LoPro 7 3/8 to 7 7/8 FlexFit Fitted Baseball Cap |
---|
A 6-panel, low profile fitted baseball cap is one of the most comfortable caps around. Spandex has been woven into the garment washed cotton crown enabling the baseball cap to stretch without disrupting the classic shape. The inner sweatband is also elasticized for an easy fit. There are 6 sewn eyelets on each panel for ventilation. The undervisor of the bill or visor matches the color of the hat. Each FLEXFIT baseball cap has the permacurv® bill/visor, so all the customizing work has been done and all you have to do is simply wear the cap! Approx. 3 1/8" Crown 2 3/4" Bill/Visor Made of: 98% Cotton 2% Spandex Classic 6-Panel Design Low Profile Crown ("LoPro") Sewn Eyelets for Ventilation Cotton Lined 2 Front Panels - For Soft Structure Relaxed Garment Washed Twill Feel Closed Back - Stretches to Fit Elasticized FlexFit Sweatband Size: 7 3/8 - 7 7/8. Stretches to fit sizes 7 3/8 (L) through 7 7/8 (XXL) comfortably. |
Close
|
Cotton Hat Sizer |
---|
Please Note: This item sells as a SINGLE sizing strip in either Black or White. Made in the USA Find yourself in-between hat sizes? Need a better fit? Prefer the added comfort of a cotton sweatband? All this can be achieved with the Cap-Ban-Nu Cotton Hat Sizer ideal for sizing your hat down by half a size! For best results, please follow all instructions for use (below). Instructions: * Remove tape backing from product. * Stick to the front section of the hat's sweatband or whatever area the hat has a loose fit (front, back or sides). You can also place the sizer behind the sweatband, directly onto the hat, or onto the backside of the sweatband. * Discard the used strip when soiled and replace. Approx. 10 3/4" Length 1" Width 2.5 MM Thick Made of: 100% Cotton Jersey Size: One single sizer per pack. One Size Fits Most. |
Close
|
3-Pleat Satin Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a multitude of great colors, the 3-Pleat Satin Puggaree Hat Band will give a fresh new look to your favorite hat. For best results, please follow all instructions for use (below). Approx. 28" Total Length, End to End 2" Width Made of: 100% Satin 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Garment Washed Twill LoPro FlexFit Fitted Baseball Cap |
---|
A 6-panel, low profile fitted baseball cap is one of the most comfortable caps around. Spandex has been woven into the garment washed cotton crown enabling the baseball cap to stretch without disrupting the classic shape. The inner sweatband is also elasticized for an easy fit. There are 6 sewn eyelets on each panel for ventilation. The undervisor of the bill or visor matches the color of the hat. Each FLEXFIT baseball cap has the permacurv® bill/visor, so all the customizing work has been done and all you have to do is simply wear the cap! Approx. 3 1/8" Crown 2 3/4" Bill/Visor Made of: 98% Cotton 2% Spandex Classic 6-Panel Design Low Profile Crown ("LoPro") Sewn Eyelets for Ventilation Cotton Lined 2 Front Panels - For Soft Structure Relaxed Garment Washed Twill Feel Closed Back - Stretches to Fit Elasticized FlexFit Sweatband Sizes: S/M fits sizes 6 3/4 (XS) - 7 1/8 (M); L/XL fits sizes 7 1/4 (L) - 7 5/8 (XL). |
Close
|
Paisley 3-Pleat Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a classic paisley print in varying colors, the Paisley 3-Pleat Puggaree Hat Band by Capas Headwear will give a colorful new twist to your favorite hat. For best results, please follow all instructions for use (below). Approx. 29" Total Length, End to End 1 7/8" Width Made of: 100% Polyester 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Combed Twill MidPro FlexFit Fitted 7 3/8 - 8 Baseball Cap |
---|
The traditional 6-panel baseball cap has a fused buckram skeleton that forms the rounded athletic crown. Spandex has been woven into the cotton twill baseball cap to allow for maximum stretch and comfort. Each panel has a tonal thread sewn eyelet for ventilation. The inner elasticized sweatband stretches for fit, just like the cap. The fabric color under the bill/visor is a neutral gray. Each FLEXFIT baseball cap has the permacurv® bill/visor, so all the customizing work has been done and all you have to do is simply wear the cap! This cap will fit up to a size 8! Approx. 4" Crown 2 3/4" Bill/Visor Made of: 63% Polyster 34% Cotton 3% Spandex 6-Panel Design Buckram-Supported Front Panels (2) Top Button Sewn Eyelets Closed Back - Stretches to Fit Gray Undervisor Elastic Sweatband Unlined Size: Fitted - Fits sizes 7 3/8 (L) - 8 (XXXL) comfortably. |
Close
|
Cool and Dry FlexFit Fitted Baseball Cap |
---|
The traditional 6 panel mid-profile baseball cap has a fused buckram skeleton that forms the rounded athletic crown. Spandex has been fused with the polyester calocks tricot (mesh) to allow for maximum stretch and comfort. Each panel has a tonal thread sewn eyelet for ventilation. The inner elasticized sweatband stretches for fit, just like the baseball cap. The Cool & Dry fabric and sweatband is a performance fabric that transfers moisture away from the wet parts of the baseball cap to areas that dry quickly. The fabric color under the bill/visor is a neutral gray. Each FLEXFIT ballcap has the permacurv® bill or visor, so all the customizing work has been done and all you have to do is simply wear the cap! Approx. 3 1/2" Crown 2 3/4" Bill/Visor Made of: 97% Polyester 3% Spandex 6-Panel Design Buckram-Supported Front Panels (2) Top Button Sewn Eyelets Closed Back - Stretches to Fit Gray Undervisor Elastic Sweatband Unlined Size: One Size Fits Most - Fits sizes 6 7/8 (S) - 7 1/2 (XL). |
Close
|
Combed Twill MidPro FlexFit Fitted Baseball Cap |
---|
The traditional 6 panel baseball cap has a fused buckram skeleton that forms the rounded athletic crown. Spandex has been woven into the cotton twill baseball cap to allow for maximum stretch and comfort. Each panel has a tonal thread sewn eyelet for ventilation. The inner elasticized sweatband stretches for fit, just like the cap. The fabric color under the bill/visor is a neutral gray. Each FLEXFIT caseball cap has the permacurv® bill/visor, so all the customizing work has been done and all you have to do is simply wear the cap! Approx. 3 1/2" Crown 2 3/4" Bill/Visor Made of: 63% Polyester 34% Cotton 3% Spandex 6-Panel Design Buckram-Supported Front Panels (2) Top Button Sewn Eyelets Closed Back - Stretches to Fit Gray Undervisor Elastic Sweatband Unlined Sizes: S/M fits sizes 6 3/4 (XS) - 7 1/4 (L); L/XL fits sizes 7 1/8 (M) - 7 5/8 (XL). |
Close
|
Tonal Cotton Blend Trucker Fitted Baseball Cap |
---|
The Flexfit® Tonal Cotton Blend Trucker Fitted Baseball Cap combines the ever-trendy trucker cap and the brand's signature spandex material for a one of a kind baseball cap. The mesh provides a responsive fit while the front panels are buckram-supported. A silver undervisor on the permacurv® bill/visor, and inner elasticized sweatband that stretches to fit, make this cap a simple wear! Approx. 4" Crown 2 3/4" Bill/Visor Made of: 55% Polyester 43% Cotton 2% P.U. Spandex 6-Panel Design Mesh Back Panels (4) Buckram-Supported Front Panels (2) Top Button Sewn Eyelets Closed Back - Stretches to Fit Gray Undervisor Elastic Sweatband Unlined Size(s): One Size Fits Most; Fits sizes 6 7/8 (S) - 7 1/2 (XL) comfortably. |
Close
|
Terry Cloth Hat Sizer |
---|
Please Note: This item sells as a SINGLE sizing strip in either Black or Tan. Made in the USA Find yourself in-between hat sizes? Need a better fit? Prefer the added comfort of a terry cloth sweatband? All this can be achieved with the Cap-Ban-Nu Terry Cloth Hat Sizer that can size your hat down half a size! For best results, please follow all instructions for use (below). Instructions: * Remove tape backing from product. * Stick to the front section of the hat's sweatband or whatever area the hat has a loose fit (front, back or sides). You can also place the sizer behind the sweatband, directly onto the hat, or onto the backside of the sweatband. * Discard the used strip when soiled and replace. Approx. 10 3/4" Length 1 1/8" Width 5 MM Thick Made of: 100% Cotton Terry Cloth Size: One single sizer per pack. One Size Fits Most. |
Close
|
Cool and Dry Pique Mesh Fitted Baseball Cap |
---|
Want a comfortable, lightweight cap, the Flexfit® Cool and Dry Pique Mesh Fitted Baseball Cap is just the ticket thanks to the pique weave fabric. Cool and dry technology are sweat and moisture-wicking will keep you dry and refreshed on your next workout. A silver undervisor on the permacurv® bill/visor and inner elasticized sweatband that stretches to fit make this cap a simple wear! Approx. 4" Crown 2 3/4" Bill/Visor Made of: 99% Polyester 1% P.U. Spandex 6-Panel Design Buckram-Supported Front Panels (2) Top Button Sewn Eyelets Closed Back - Stretches to Fit Gray Undervisor Elastic Sweatband Unlined Size(s): One Size Fits Most; Fits sizes 6 7/8 (S) - 7 1/2 (XL) comfortably. |
Close
|
Seagrass Straw Ascot Cap |
---|
Please Note: This style runs large, see sizing details below or call us at 1-888-847-4287 for help with sizing. S = 7 M = 7 1/4 L = 7 1/2 XL = 7 3/4 Incredibly breathable and lightweight, the Seagrass Straw Ascot Cap by Capas Headwear is unique among straw caps. Featuring an open weave twisted seagrass straw body, this ascot provides shading from the sun while maximizing ventilation. Natural seagrass possesses wonderful color variation that gives the cap a uniquely organic and relaxed look. Approx. 10" Length 8" Width 2" Brim/Bill (Measured from size M) Made of: 100% Seagrass Straw Open Weave Twisted Seagrass Straw Body Cotton Sweatband Unlined Sizes: S, M, L and XL. Sizing runs large, see sizing disclaimer at top of description. |
Close
|
Pacheco Wool Duckbill Ivy Cap |
---|
FINAL SALE Please Note: The inner label on this ivy cap is mislabeled as 100% Wool Blend. These caps are made of 100% Wool, as confirmed by the manufacturer. Made in the USA Express your personal style with the Pacheco Wool Duckbill Ivy Cap by Goorin Bros. Made of 100% wool in a herringbone pattern, the underbill has an attractive faux suede finish. Attractive and striking, the Pacheco is just the right fall accessory. As Goorin Bros says 'We love what hats do for people." Approx. 9 1/2" Length, Back to Front 9 1/2" Width, Side to Side 2 1/2" Sewn Bill Made of: 100% Wool Made in the USA 6-Panel Crown Herringbone Pattern Faux Suede Underbill Sleek Sweatband Satin Lining Size(s): S, M, L and XL; fits true to size. FINAL SALE |
Close
|
Pro-Style On Field 210 FlexFit Fitted Baseball Cap |
---|
The FlexFit Fitted Pro-Style On Field 210 is a 6-panel, high-profile cap complete with sewn eyelets and 8 rows of stitching on a rounded flat visor. Inspired by the on-field performance baseball caps in sports, the moisture absorbent sweatband is ready for hard work and sweat. Approx. 4 1/2" Crown 2 3/4" Flat Bill/Visor Made of: 15% Wool 83% Acrylic 2% P.U. Spandex Classic 6-Panel Crown Buckram-Supported Front Panels (2) Sewn Eyelets - For Ventilation Closed Back - Stretches to Fit Tonal Undervisor Elastic Sweatband Unlined Sizes: S/M fits sizes 6 7/8 (S) - 7 1/4 (L); L/XL fits sizes 7 1/4 (L) - 7 5/8 (XL). |
Close
|
Mariner Rush Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. UPF 50+ Sun Protection Locally based out of San Diego, CA, Hemlock Hat Co brings you their specialty line of functional, outdoor hats that celebrate self-expression. Trimmed and lined with a wide array of fun, original prints, their lifeguard styles allow you to express your personal style while enjoying everything the outdoors has to offer. The new Mariner Rush Straw Lifeguard Hat features their classic straw lifeguard hat body with underwater-themed binding on brim, underbrim and Hemlock sewn patch. An adjustable chin cord adds protection during windy conditions; a stretchy and absorbent sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 3/4" Cattleman Crown 4 1/2" Downturned Brim Made of: Body - 100% Handwoven Rush Straw Lining - 100% Polyester UPF 50+ Sun Protection - Underwater Print Fabric Underbrim Designed in California, USA Sewn Hemlock Patch - Front Underwater Print Fabric Binding On Brim Braided Rope Chin Cord with Wooden Adjustor Elastic Sweatband - Stretches to Fit Unlined Crown Size(s): One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 1/4 (L) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
Close
|
Liberty Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. UPF 50+ Sun Protection Locally based out of San Diego, CA, Hemlock Hat Co brings you their specialty line of functional, outdoor hats that celebrate self-expression. Trimmed and lined with a wide array of fun, original prints, their lifeguard styles allow you to express your personal style while enjoying everything the outdoors has to offer. The new Liberty Straw Lifeguard Hat features their classic straw lifeguard hat body with a American flag-themed binding on brim, lining and Hemlock sewn patch. An adjustable chin cord adds protection during windy conditions; a stretchy and absorbent sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 3/4" Cattleman Crown 4 1/4" Downturned Brim Made of: Body - 100% Handwoven Straw Lining - 100% Polyester UPF 50+ Sun Protection - American Flag Print Fabric Underbrim Designed in California, USA Sewn Hemlock Patch - Front American Flag Print Fabric Binding On Brim Braided Rope Chin Cord with Wooden Adjustor Elastic Sweatband - Stretches to Fit Unlined Crown Size(s): One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 1/4 (L) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
Close
|
Leather Greek Fisherman's Cap |
---|
Made in Greece Capas Headwear is giving the fisherman's cap some street credit with a leather body in their latest fall headpiece, the Leather Greek Fisherman's Cap. Made of genuine leather, details include a double-layered cord hat band, decorative bill accent, leather sweatband and satin lining. A practical design this cap is dressed up for a night on the town. Approx. 1 7/8" Soft Crown 3/4" Structured Band 2 1/8" Bill/Visor Made of: 100% Leather Double-Layered Cord Hat Band Leather Side Buttons Decorative Bill Accent Leather Sweatband Satin Lining Sizes: S, M, L and XL; fits true to size. |
Close
|
USA Cock Mesh Trucker Snapback Baseball Cap |
---|
This animal sure stands out in nature! The USA Cock Mesh Trucker Snapback Baseball Cap combines navy and red into a mesh trucker ball cap, trimmed with a patch of embroidered rooster artwork and text. Approx. 4 3/4" Crown 2 3/8" Pre-Curved Bill Made of: 43% Cotton 57% Polyester Classic 5-Panel Design Mesh Back Panels (4) Buckram-Supported Front Panel Embroidered Rooster Patch Goorin Bros. Tag Loop Cotton Twill Sweatband Unlined Size(s): Adjustable. Adjusts via plastic snapback, fits up to size 7 5/8 (XL) comfortably. |
Close
|
Vented Toyo Straw Ascot Ivy Cap |
---|
Breathability is your first priority with the Vented Toyo Straw Ascot Ivy Cap from Capas Headwear! This functional cap features an open weave twisted toyo straw body that is reliable and comfortable, especially when paired with the cotton twill sweatband. You'll always look stylish with this cap on your head! Approx. 8 1/2" Diameter 2" Visor Made of: 100% Toyo Straw Woven Straw Body Firm/Stiff Bodyh Cotton Twill Sweatband Unlined Sizes: S, M, L and XL; fits true to size. |
Close
|
Black Panther Trucker Snapback Baseball Cap |
---|
The majestic wild creature is also known as a comic book superhero. Be regal, be brave with the Black Panther Trucker Snapback Baseball Cap from Goorin Bros! The mesh back panels and buckram-supported front panels create a classic snapback design, and emphasize comfort like no other. Plus, the black panther patch on the front of the cap allows you to show that you're a real animal! Complete your collection with the Beanie and Bucket Hat. Approx. 4 3/4" Crown 2 3/8" Pre-Curved Bill Made of: 57% Polyester 43% Cotton Classic 5-Panel Design Mesh Back Panels (4) Buckram-Supported Front Panel Embroidered Black Panther Patch Goorin Bros. Tag Loop Cotton Twill Sweatband Unlined Size: Adjustable. Adjusts via plastic snapback, fits up to size 7 5/8 (XL) comfortably. |
Close
|
Lone Wolf Mesh Trucker Snapback Baseball Cap |
---|
Goorin Bros' infamous Animal Farm collection presents the Lone Wolf Trucker Snapback Baseball Cap. Featuring a classic five-panel mesh trucker style with a sewn wolf patch on its front, this trucker is finished with a plastic snapback adjuster at the back. With a Goorin Bros castle logo side tab the Lone Wolf Trucker Snapback Baseball Cap is another great addition to their fun line of trucker caps. Complete your collection with the Beanie and Bucket Hat. Approx. 4 3/4" Crown 2 3/8" Pre-Curved Bill Made of: 57% Polyester 43% Cotton Classic 5-Panel Design Mesh Back Panels (4) Buckram-Supported Front Panel Embroidered Wolf Patch Goorin Bros. Tag Loop Cotton Twill Sweatband Unlined Sizes: Adjustable. Adjusts via plastic snapback, fits up to size 7 5/8 (XL) comfortably. |
Close
|
Kids' Wool Felt C-Crown Trilby Fedora Hat |
---|
Whether you need it for a Halloween costume or a school play, or maybe your little one wants to start a trend. The wool felt C-Crown Stingy Brim Fedora is a scaled down version of a classic shape. Approx. 3 1/2" C-Crown (Teardrop) 1 1/4" Overwelt Stingy Brim Made of: 100% Wool Felt 1" Wide Grosgrain Ribbon Hat Band Vinyl sweatband Unlined Sizes: Child's S, M, L, and XL. Suggested for: Kids 2-10 Years Old (see chart below): Age Inches CMS Hat Size Size 1 - 2 years 18 7/8 48 6 Small 2 - 4 years 19 5/8 50 6 1/4 Medium 5 - 7 years 20 3/8 52 6 1/2 Large 8 - 10 years 21 1/8 54 6 3/4 X-Large |
Close
|
Skipper Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. UPF 50+ Sun Protection Locally based out of San Diego, CA, Hemlock Hat Co brings you their specialty line of functional, outdoor hats that celebrate self-expression. Trimmed and lined with a wide array of fun, original prints, their lifeguard styles allow you to express your personal style while enjoying everything the outdoors has to offer. The new Skipper Straw Lifeguard Hat features their classic straw lifeguard hat body with a sea life-themed binding on brim, lining and Hemlock sewn patch. An adjustable chin cord adds protection during windy conditions; a stretchy and absorbent sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 3/4" Cattleman Crown 4 3/8" Downturned Brim Made of: Body - 100% Handwoven Straw Lining - 100% Polyester UPF 50+ Sun Protection - Sea Life Print Fabric Underbrim Designed in California, USA Sewn Hemlock Patch - Front Sea Life Print Fabric Binding On Brim Braided Rope Chin Cord with Wooden Adjustor Elastic Sweatband - Stretches to Fit Unlined Crown Size(s): One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 1/4 (L) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
Close
|
Kap Strap Wind Cord |
---|
How frustrating is it when your cap flies off? With the Original Kap Strap your ride on the rollercoaster, motorcycle, boat, or just on a windy day is worry free. The Kap Strap is a braided fabric cord with two secure clamps on either end; attach one to your cap and the other to your shirt's collar. Never fear windy days while wearing a cap again! Approx. 12 1/4" Length, End to End (1) Braided Fabric Strap w/ Clip at Each End Size: One Size Fits Most - Attach one end to cap and other to your shirt collar. Prevents cap from flying away. |
USA: 1-888-VHS-HATS (1-888-847-4287)
INT'L: +1 619-906-4440 Se habla español
Shop for Hats at VillageHatShop.com | Privacy Policy | Website Accessibility | Site Map
Copyright © 1999-2020 Village Hat Shop: The #1 Source for Hats Online
*ALL SPECIAL OFFERS AND DISCOUNTS
Excludes wholesale/B2B, Certain Brand Restrictions, Special Orders or Where Otherwise Noted.
CONTACT USWe are happy to help! |
1 (888) 847-4287Mon-Sun 8am-4:00pm |