Close
|
T3 Cotton Duck Booney Hat - Khaki |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection The T3 is the most sought after Tilley Hat - made of classic cotton duck canvas in the traditional "Aussie" style with a versatile snap-up brim. The original design has 40 years of history, make sure to pay homage with your very own T3. Approx. 4" Crown 2 3/4" Front/Back Brim 2 3/8" Side Brim Made of: 100% Cotton Duck Features: * Guaranteed for life. * Certified sun protection - delivers an UPf of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Keep it on in windy conditions through the wind cord & size cinch system. * Secure your Hat during a steep incline with rear brim loop for clip - loop also holds wind cords when not in use. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Buoyancy - stays afloat in water. * Weighs 5.4 oz/153 grams. * DWR (Durable Water Repellent) Finish. * British brass grommets. * OEKO-TEX® Certification. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Sizes: 6 7/8 (S) - 7 7/8 (XXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
3-Pleat Cotton Puggaree Hat Band |
---|
A new hat band can do wonders to freshen up any old hat, may we suggest the 3-Pleat Cotton Puggaree Hat Band by Capas Headwear. Featuring a multitude of great colors, this pug hat band is made of 100% cotton. Need to dress your hat up in something new? Look no further than the 3-Pleat Cotton Puggaree Hat Band - a fresh new look to your favorite hat! For best results, please follow all instructions for use (below). *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. Approx. 28" Total Length, End to End 1 7/8" Width Made of: 100% Cotton 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! |
Close
|
Brushed Twill MidPro FlexFit Fitted Baseball Cap |
---|
The traditional 6-panel baseball cap has a fused buckram skeleton that forms the rounded athletic crown. Spandex has been woven into the brushed cotton twill baseball cap to allow for maximum stretch and comfort. Each panel has a tonal thread sewn eyelet for ventilation. The inner elasticized sweatband stretches for fit, just like the cap. The fabric color under the bill/visor is a neutral gray. Each FLEXFIT baseball cap has the permacurv® bill/visor, so all the customizing work has been done and all you have to do is simply wear the cap! Approx. 3 1/2" Crown 2 3/4" Bill/Visor Made of: 98% Cotton 2% Spandex 6-Panel Design Buckram-Supported Front Panels (2) Top Button Sewn Eyelets Closed Back - Stretches to Fit Gray Undervisor Elastic Sweatband Unlined Sizes: S/M fits sizes 6 3/4 (XS) - 7 1/8 (M); L/XL fits sizes 7 1/4 (L) - 7 5/8 (XL). For Bulk/Wholesale Purchase of this hat CLICK HERE or call us at 1-888-847-4287. |
Close
|
Italian Straw Skimmer Hat |
---|
Made in Italy Although superseded by the Panama hat in this century, the Skimmer was for many decades the man's straw hat of choice. The Italian Skimmer by Capas is Made in Italy from 4-ply Koberg straw. This is an authentic, high quality Skimmer hat often assiciated with barber shop quartets, jazz bands, and the like. (Also known as a Boater or Sailor). Approx. 3 1/2" Flat Top Crown 2 1/4" Flat Brim Made of: 100% 4-Ply Koberg Straw Striped Hat Band with Side Bow Firm/Stiff Body Leather Sweatband Lined Sizes: Fitted - Sizes 6 7/8 (S) to 7 3/4 (XXL); fits true to size. |
Close
|
Garment Washed Twill LoPro 7 3/8 to 7 7/8 FlexFit Fitted Baseball Cap |
---|
A 6-panel, low profile fitted baseball cap is one of the most comfortable caps around. Spandex has been woven into the garment washed cotton crown enabling the baseball cap to stretch without disrupting the classic shape. The inner sweatband is also elasticized for an easy fit. There are 6 sewn eyelets on each panel for ventilation. The undervisor of the bill or visor matches the color of the hat. Each FLEXFIT baseball cap has the permacurv® bill/visor, so all the customizing work has been done and all you have to do is simply wear the cap! Approx. 3 1/8" Crown 2 3/4" Bill/Visor Made of: 98% Cotton 2% Spandex Classic 6-Panel Design Low Profile Crown ("LoPro") Sewn Eyelets for Ventilation Cotton Lined 2 Front Panels - For Soft Structure Relaxed Garment Washed Twill Feel Closed Back - Stretches to Fit Elasticized FlexFit Sweatband Size: 7 3/8 - 7 7/8. Stretches to fit sizes 7 3/8 (L) through 7 7/8 (XXL) comfortably. |
Close
|
LTM6 Airflo Hat - Khaki/Olive |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection The Tilley LTM6 AIRFLO® Hat is made from a lightweight 100% recycled nylon with a UPF50+ rating. The bluesign® approved fabric provides excellent UV protection while the mesh surrounding the top of the crown allows for incredible breathability. Approx. 4 3/8" Crown 3 1/4" Front/Back Brim 2 1/2" Side Brim Made of: Body - 100% Recycled Nylon Mesh - 100% Polyester Features: * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Underbrim reduces glare from most surfaces. * Keep it on in windy conditions through the wind cord & size cinch system. * Secure your Hat during a steep incline with rear brim loop for clip - loop also holds wind cords when not in use. * Ventilation through mesh insert around the top of the crown. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Lightweight, weighs 4 oz/113 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) Finish. * bluesign® Approved Fabric. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Sizes: 6 7/8 (S) - 8+ (XXXL);Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
Be Bop Coconut Straw Pork Pie Hat |
---|
Made in the USA The Be Bop Coconut Straw Pork Pie Hat by New York Hat & Cap is made in the USA of 100% coconut straw. Lightweight and breathable, coconut straw is a great natural material used more and more in fashion today. Featuring a popular telescope crown and snap brim, the Be Bop Coconut Straw Pork Pie Hat by New York Hat & Cap is finished with a removable side feather and classic black grosgrain ribbon hat band. Approx. 3 5/8" Telescope Crown 1 5/8" Snap Brim Made of: 100% Coconut Straw Made in the USA Tonal Grosgrain Ribbon Bound Edge Removable Side Feather Grosgrain Ribbon Hat Band Cotton Twill Sweatband Unlined Sizes: M, L, XL and XXL; fits true to size. |
Close
|
Cool and Dry FlexFit Fitted Baseball Cap |
---|
The traditional 6 panel mid-profile baseball cap has a fused buckram skeleton that forms the rounded athletic crown. Spandex has been fused with the polyester calocks tricot (mesh) to allow for maximum stretch and comfort. Each panel has a tonal thread sewn eyelet for ventilation. The inner elasticized sweatband stretches for fit, just like the baseball cap. The Cool & Dry fabric and sweatband is a performance fabric that transfers moisture away from the wet parts of the baseball cap to areas that dry quickly. The fabric color under the bill/visor is a neutral gray. Each FLEXFIT ballcap has the permacurv® bill or visor, so all the customizing work has been done and all you have to do is simply wear the cap! Approx. 3 1/2" Crown 2 3/4" Bill/Visor Made of: 97% Polyester 3% Spandex 6-Panel Design Buckram-Supported Front Panels (2) Top Button Sewn Eyelets Closed Back - Stretches to Fit Gray Undervisor Elastic Sweatband Unlined Size: One Size Fits Most - Fits sizes 6 7/8 (S) - 7 1/2 (XL). |
Close
|
LTM5 Airflo Hat - Stone |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection The Tilley LTM5 AIRFLO® Hat is designed with a medium brim and polyester mesh in the crown for coolness and comfort during hot days and strenuous activities. The LTM5 AIRFLO® is similar to the LTM6 but has a slimmer profile but the same water repellent finish. Approx. 3 3/4" Crown 2 5/8" Front Brim 2 3/4" Back Brim 2 1/8" Side Brims Made of: Body - 100% Nylon Mesh - 100% Polyester Features: * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks. 98% of harmful UVA/UVB radiation. * Keep it on in windy conditions through the wind cord & size cinch system. * Secure your Hat during a steep incline with rear brim loop for clip - loop also holds wind cords when not in use. * Ventilation through mesh insert around the top of the crown. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Weighs 3 oz/85 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) Finish. * bluesign® Approved. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Sizes: 6 7/8 (S) - 8+ (XXXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
3-Pleat Satin Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a multitude of great colors, the 3-Pleat Satin Puggaree Hat Band will give a fresh new look to your favorite hat. For best results, please follow all instructions for use (below). Approx. 28" Total Length, End to End 2" Width Made of: 100% Satin 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Combed Twill MidPro FlexFit Fitted 7 3/8 - 8 Baseball Cap |
---|
The traditional 6-panel baseball cap has a fused buckram skeleton that forms the rounded athletic crown. Spandex has been woven into the cotton twill baseball cap to allow for maximum stretch and comfort. Each panel has a tonal thread sewn eyelet for ventilation. The inner elasticized sweatband stretches for fit, just like the cap. The fabric color under the bill/visor is a neutral gray. Each FLEXFIT baseball cap has the permacurv® bill/visor, so all the customizing work has been done and all you have to do is simply wear the cap! This cap will fit up to a size 8! Approx. 4" Crown 2 3/4" Bill/Visor Made of: 63% Polyster 34% Cotton 3% Spandex 6-Panel Design Buckram-Supported Front Panels (2) Top Button Sewn Eyelets Closed Back - Stretches to Fit Gray Undervisor Elastic Sweatband Unlined Size: Fitted - Fits sizes 7 3/8 (L) - 8 (XXXL) comfortably. |
Close
|
T3 Cotton Duck Booney Hat - Natural |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection The T3 is the most sought after Tilley Endurables hat, the originale with 40 years of history to back it up. Made of classic cotton duck canvas in the unique booney style with a versatile snap-up brim. Approx. 4" Flat Crown 2 3/4" Brim - Front & Back 2 3/8" Brim - Sides Made of: 100% Cotton Duck Features: * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Keep it on in windy conditions through the wind cord & size cinch system. * Secure your Hat during a steep incline with rear brim loop for clip - loop also holds wind cords when not in use. * Hydrofil® anti-sweat band to wick away moisture. * Weighs 5.4 oz/153 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) Finish. * Double Snap-Up Brim. * British Brass Grommets. * OEKO-TEX® certification. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Size(s): 6 7/8 (S) - 8+ (XXXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
Paisley 3-Pleat Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a classic paisley print in varying colors, the Paisley 3-Pleat Puggaree Hat Band by Capas Headwear will give a colorful new twist to your favorite hat. For best results, please follow all instructions for use (below). Approx. 29" Total Length, End to End 1 7/8" Width Made of: 100% Polyester 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
LTM6 Airflo - Olive Green |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection The Tilley LTM6 AIRFLO® Hat is made from a lightweight 100% recycled nylon with a UPF50+ rating. The bluesign® approved fabric provides excellent UV protection while the mesh surrounding the top of the crown allows for incredible breathability. Approx. 4 3/8" Crown 3 1/4" Front/Back Brim 2 1/2" Side Brim Made of: Body - 100% Nylon Mesh - 100% Polyester Features: * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Underbrim reduces glare from most surfaces. * Keep it on in windy conditions through the wind cord & size cinch system. * Secure your Hat during a steep incline with rear brim loop for clip - loop also holds wind cords when not in use. * Ventilation through mesh insert around the top of the crown. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Lightweight, weighs 4 oz/113 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) finish. * bluesign® Approved. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Sizes: 6 7/8 (S) - 8+ (XXXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file an insurance claim, please click here to be directed to the Tilley returns and exchange page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
Waterproof Rain Hat |
---|
Please Note: Sizes run small. See below or call us at 1-888-847-4287 for help with sizing. S = 6 3/4 M = 7 L = 7 1/4 XL = 7 1/2 UPF 50+ Sun Protection Tilley Endurables has taken the basic boonie to the next level with the Waterproof Rain Hat. The seam sealed construction makes this hat rain proof and wind proof, a double whammy when it comes to inclement weather. The snap-up sides help for a more streamlined silhouette and the adjustable reflective wind cord allows for a custom fit. Approx. 3 1/2" Crown 2 1/2" Front/Back Brim 2 1/4" Side Brim Made of: 73% Polyester 27% Polyurethane Features: * Designed in Canada. * UPF 50+ Sun Protection - Tested and Certified. * Rain and Wind Proof - Moisture Wicking and Durable Water Repellency. * DWR (Durable Water Repellent) finish. * Seam Sealed. * Keep it on in windy conditions through the wind cord & size cinch system. * Reflective yarns in the elasticized wind cords to increase visibility at dusk & dawn. * Adjustable Wind Cord with Metal Toggle - For Windy Conditions * Secure your Hat while portaging with rear brim loop for clip - loop also holds wind cords when not in use. * Temperature is regulated with Schoeller® Fabric c_change® membrane. * Hydrofil® anti-sweat band to wick away moisture. * Quick Drying. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Buoyancy - stays afloat in water. * Snap up sides for added wind stability & for added style. * Mesh Lining. * Machine wash cool water, delicate cycle or hand wash; Reshape & air-dry. * Tilley Side Tag. Size(s): S, M, L, and XL; ; runs small, please see disclaimer at the top of the product description. |
Close
|
Six Panel Leather Skull Cap Beanie Hat |
---|
Please Note: Size XL in this cap runs small (fits 7 3/8 - 7 1/2). Made in the USA Finally the famous New York Hat & Cap Six Panel Beanie Hat is available in 100% genuine leather! Proudly made in the USA, the Six Panel Leather Skull Cap Beanie Hat ffers 6-panel construction and a fold-over cuff in a classic skull cap beanie style. The Six Panel Leather Skull Cap Beanie Hat keeps your head nice and warm while you look cool as ever. Approx. 4" Crown Height 8" Diameter 1 3/4" Cuff Made of: 100% Genuine Cowhide Leather 6-Panel Construction Cotton Sweatband Cotton Inseam Taping Unlined Sizes: M and L fits true to size. XL runs small, please see disclaimer at top. |
Close
|
Garment Washed Twill LoPro FlexFit Fitted Baseball Cap |
---|
A 6-panel, low profile fitted baseball cap is one of the most comfortable caps around. Spandex has been woven into the garment washed cotton crown enabling the baseball cap to stretch without disrupting the classic shape. The inner sweatband is also elasticized for an easy fit. There are 6 sewn eyelets on each panel for ventilation. The undervisor of the bill or visor matches the color of the hat. Each FLEXFIT baseball cap has the permacurv® bill/visor, so all the customizing work has been done and all you have to do is simply wear the cap! Approx. 3 1/8" Crown 2 3/4" Bill/Visor Made of: 98% Cotton 2% Spandex Classic 6-Panel Design Low Profile Crown ("LoPro") Sewn Eyelets for Ventilation Cotton Lined 2 Front Panels - For Soft Structure Relaxed Garment Washed Twill Feel Closed Back - Stretches to Fit Elasticized FlexFit Sweatband Sizes: S/M fits sizes 6 3/4 (XS) - 7 1/8 (M); L/XL fits sizes 7 1/4 (L) - 7 5/8 (XL). |
Close
|
British Millerain Waxed Cotton Strapback Baseball Cap |
---|
UPF 50+ Sun Protection The British Millerain Waxed Cotton Strapback Baseball Cap is a classic 6-panel cap with some innovative twists by Tilley Endurables. With a UPF 50+ sun protection, this cap is water repellent thanks to the British Millerain waxed finish, and if that wasn't enough, it also features an adjustable leather strap for the perfect fit. Designed with comfort in mind, this cap also has a Tilley sweatband and smooth lining. Approx. 4" 6-Panel Crown 2 3/4" Curved Bill Made of: 100% British Millerain Waxed Cotton UPF 50+ Sun Protection Designed in Canada British Millerain Waxed Finish - Durable Water Repellent Top Button Adjustable Leather Strap - Back Tilley's Anti-Sweat Sweatband Inseam Taping Smooth Lining Size(s): S/M and L/XL; fits true to size. |
Close
|
Fisherman Cotton Blend Bucket Hat |
---|
Made in the USA A bucket hat with some pork pie tendencies, we just love the originality of the Fisherman Cotton Blend Bucket Hat by the New York Hat Company. With a short, snap brim usually associated with a pork pie, the crushable, square crown and cotton material are bucket hat staples. Even the metal eyelets and grosgrain ribbon hat band are regularly seen on more traditional buckets. We hope you enjoy this unique hybrid from the New York Hat Company! Approx. 3 3/4" Square Crown 1 1/2" Snap Brim Made of: 65% Cotton 35% Polyester Made in the USA Packable/Crushable Crown 4 Metal Eyelets - For Ventilation Grosgrain Striped Ribbon Hat Band Stitched Brim Self Fabric Binding On Brim Cotton Twill Sweatband Inseam Taping Unlined Size(s): M, L and XL; fits true to size. |
Close
|
Combed Twill MidPro FlexFit Fitted Baseball Cap |
---|
The traditional 6 panel baseball cap has a fused buckram skeleton that forms the rounded athletic crown. Spandex has been woven into the cotton twill baseball cap to allow for maximum stretch and comfort. Each panel has a tonal thread sewn eyelet for ventilation. The inner elasticized sweatband stretches for fit, just like the cap. The fabric color under the bill/visor is a neutral gray. Each FLEXFIT caseball cap has the permacurv® bill/visor, so all the customizing work has been done and all you have to do is simply wear the cap! Approx. 3 1/2" Crown 2 3/4" Bill/Visor Made of: 63% Polyester 34% Cotton 3% Spandex 6-Panel Design Buckram-Supported Front Panels (2) Top Button Sewn Eyelets Closed Back - Stretches to Fit Gray Undervisor Elastic Sweatband Unlined Sizes: S/M fits sizes 6 3/4 (XS) - 7 1/4 (L); L/XL fits sizes 7 1/8 (M) - 7 5/8 (XL). |
Close
|
TWS1 Paddler Hat - Stone |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection You're ready for any adventure with the TWS1 All Weather Hat from Tilley! This outdoor hat is perfect for any trek, in or out of water. The TWS1 All Weather Hat is ready keep you comfortable with the Schoeller 3x dry fabric C-Change membrane to control temperature when out in the sun, wind, and rain. The best part? It's also very comfortable! Approx. 3 1/4" Crown 2 3/4" Front/Back Brim 2 3/8" Side Brim Made of: 73% Polyester Schoeller® Technologies ecorepel® 27% Polyurethane Schoeller® Technologies ecorepel® Features: * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Underbrim reduces glare from most surfaces. * Wind stability through an extra stiff front brim & plastic wiring around the whole brim. * Keep it on in windy conditions through the wind cord & size cinch system. * Reflective yarns in the wind cords to increase visibility at dusk & dawn. * Secure your Hat while portaging with rear brim loop for clip - loop also holds wind cords when not in use. * Temperature is regulated with Schoeller® Fabric c_change® membrane. * Ventilation through a back vent & side grommets. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Lightweight, weighs 3.2 oz/91 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) finish. * Snap up sides for added wind stability & for added style. * Machine wash cool water, delicate cycle or hand wash; Reshape & air-dry. Size(s): 7 (M) - 7 7/8 (XXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
Vintage 1900 Leather Ivy Cap |
---|
Please Note: This hat is designed to have a distressed, worn-in look. Scuffs, scratches, etc. are all part of the style's intentional look and do NOT constitute damage. Made in the USA You're sure to look classy with the Vintage 1900 Leather Ivy Cap from the New York Hat Company! This stylish cap is made in the USA, sure to be high quality and always chic. Additionally, the smooth leather body is iconic, especially when paired with the soft sweatband and comfortable, unlined interior. Approx. 8" Diameter 1 3/4" Sewn Bill Made of: 100% Leather Made in the USA Smooth Leather Body Elastic and Cotton Twill Sweatband Unlined Sizes: S/M and L/XL; fits true to size. |
Close
|
1900 Lambskin Leather Ivy Cap |
---|
Made in the USA We love the retro vibes the New York Hat Company is giving us this spring and the same is true with the 1900 Lambskin Leather Ivy Cap. Made of genuine lambskin leather, this cap features a classic ivy paneled design, a flat bill and elegant stitching that adds definition and detail. With the unlined interior complete with inseam taping and a half elastic, half cotton twill sweatband, the 1900 is a comfortable, everyday choice. Approx. 9 1/2" Length, Flat 9" Width, Flat 2" Sewn Bill Made of: 100% Lambskin Leather Made in the USA Packable/Crushable Sewn Bill Elastic and Cotton Twill Sweatband Inseam Taping Unlined Size(s): S/M and L/XL; fits true to size. |
Close
|
Roll Up Toyo Straw Visor |
---|
UPF 50+ Sun Protection Looking for stellar sun protection in a packable, easy to travel with hat? Look no further than the Roll Up Toyo Straw Visor by the San Diego Hat Company! Its supple braided and sewn toyo straw construction allows the Roll Up Visor to easily roll up for hassle-free storage in a purse or bag. Its wide brim provides ample coverage for your face and ears, which, when combined with its UPF 50+ rating provides excellent sun protection. Available in a rainbow of bright and classic colors, you're sure to find a Roll Up Visor that fits your style and personality! Approx. 2 1/8" Open Crown 4 1/4" Downturned Brim Made of: 75% Toyo Straw 25% Polyester UPF 50+ Sun Protection Rating Grosgrain Ribbon Bound Edges Grosgrain Ribbon Sweatband - Adjusts Fit Rollable (Packable) Size: One Size Fits Most - Fits up to size 7 1/2 (XL) comfortably; adjusts via hook and loop strap at back. |
Close
|
Brando Cotton Canvas Cap |
---|
Made in the USA Are you a "Wild one"? This Brando cap (sans chain) is similar to the style of cap that Marlon Brando wore in the Movie, "The Wild One". Featuring 8/4 (eight-quarter) paneling, a center top button, and a contrasting black lambskin leather bill/visor, the Brando Cotton Canvas Cap is finished with a cord hat band with side button details. Approx. 2 1/4" Bill/Visor Made of: Crown - 100% Cotton (Excluding Trim) Bill/Visor - 100% Genuine Lambskin Leather Made in the USA Classic 8/4 Paneling Lambskin Leather Center Top Button Layered Cord Hat Band with Side Buttons Lambskin Leather Bill/Visor Cotton Sweatband Unlined Sizes: S, M, L and XL; fits true to size. |
Close
|
Coconut Straw Stingy Fedora Hat |
---|
Made in the USA The Coconut Straw Stingy Fedora Hat by New York Hat & Cap is made in the USA of 100% coconut straw. Lightweight and breathable, coconut straw is a great natural material used more and more in fashion today. Featuring a classic center pinch crown and stingy snap brim, the Coconut Straw Stingy Fedora Hat by New York Hat & Cap is finished with a removable side feather and stylish striped grosgrain ribbon hat band. Approx. 4" Center Pinch Crown 1 5/8" Stingy Snap Brim Made of: 100% Coconut Straw Made in the USA Tonal Grosgrain Ribbon Bound Edge Removable Side Feather Grosgrain Ribbon Hat Band Cotton Twill Sweatband Unlined Sizes: M, L, XL and XXL; fits true to size. |
Close
|
Lambskin Leather Fedora Hat |
---|
Made in the USA The New York Hat Company's Lambskin Leather Fedora Hat is a sleek and stylish trilby sending us back to the days of Frank Sinatra and 1940s' private eye films. The 100% leather design from lambskin adds a slightly modern twist, while the lightweight body and satin lining make it an easy wear. Effortlessly blend retro and contemporary style with the Lambskin Leather Fedora Hat by the New York Hat Company! Approx. 3 3/4" Center Pinch Crown 1 3/8" Stingy Snap Brim Made of: 100% Leather (Lambskin) Made in the USA Self Fabric Hat Band Stitched Brim Leather Binding On Brim Cotton Twill Sweatband Satin Lining Size(s): M, L and XL; fits true to size. |
Close
|
TY Cotton Twill MidPro FlexFit Fitted Baseball Cap |
---|
The traditional 6 panel baseball cap has a fused buckram skeleton that forms the rounded athletic crown. Complete with spandex woven into the cotton twill baseball cap, the FlexFit Mid-Pro Baseball Cap is extremely comfortable with a little stretch. Limited supply at this price. Don't be last to the party, get the FlexFit Mid-Pro Cotton Twill Baseball Cap while supplies lasts! Approx. 3 1/2" Crown 2 3/4" Bill/Visor Made of: 98% Cotton 2% Spandex 6-Panel Construction Sewn Eyelets for Ventilation Elasticized Sweatband Closed Back - Stretches to Fit Gray Undervisor Unlined Size: L/XL fits sizes 7 1/4 (L) - 7 5/8 (XL). For Bulk/Wholesale purchase of this hat, CLICK HERE or call us at 1-888-847-4287. |
USA: 1-888-VHS-HATS (1-888-847-4287)
INT'L: +1 619-906-4440 Se habla español
Shop for Hats at VillageHatShop.com | Privacy Policy | Website Accessibility | Site Map
Copyright © 1999-2020 Village Hat Shop: The #1 Source for Hats Online
*ALL SPECIAL OFFERS AND DISCOUNTS
Excludes wholesale/B2B, Certain Brand Restrictions, Special Orders or Where Otherwise Noted.
CONTACT USWe are happy to help! |
1 (888) 847-4287Mon-Sun 8am-4:00pm |