Close
|
T3 Cotton Duck Booney Hat - Khaki |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection The T3 is the most sought after Tilley Hat - made of classic cotton duck canvas in the traditional "Aussie" style with a versatile snap-up brim. The original design has 40 years of history, make sure to pay homage with your very own T3. Approx. 4" Crown 2 3/4" Front/Back Brim 2 3/8" Side Brim Made of: 100% Cotton Duck Features: * Guaranteed for life. * Certified sun protection - delivers an UPf of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Keep it on in windy conditions through the wind cord & size cinch system. * Secure your Hat during a steep incline with rear brim loop for clip - loop also holds wind cords when not in use. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Buoyancy - stays afloat in water. * Weighs 5.4 oz/153 grams. * DWR (Durable Water Repellent) Finish. * British brass grommets. * OEKO-TEX® Certification. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Sizes: 6 7/8 (S) - 7 7/8 (XXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
Brushed Twill MidPro FlexFit Fitted Baseball Cap |
---|
The traditional 6-panel baseball cap has a fused buckram skeleton that forms the rounded athletic crown. Spandex has been woven into the brushed cotton twill baseball cap to allow for maximum stretch and comfort. Each panel has a tonal thread sewn eyelet for ventilation. The inner elasticized sweatband stretches for fit, just like the cap. The fabric color under the bill/visor is a neutral gray. Each FLEXFIT baseball cap has the permacurv® bill/visor, so all the customizing work has been done and all you have to do is simply wear the cap! Approx. 3 1/2" Crown 2 3/4" Bill/Visor Made of: 98% Cotton 2% Spandex 6-Panel Design Buckram-Supported Front Panels (2) Top Button Sewn Eyelets Closed Back - Stretches to Fit Gray Undervisor Elastic Sweatband Unlined Sizes: S/M fits sizes 6 3/4 (XS) - 7 1/8 (M); L/XL fits sizes 7 1/4 (L) - 7 5/8 (XL). For Bulk/Wholesale Purchase of this hat CLICK HERE or call us at 1-888-847-4287. |
Close
|
TY Cotton Twill MidPro FlexFit Fitted Baseball Cap |
---|
The traditional 6 panel baseball cap has a fused buckram skeleton that forms the rounded athletic crown. Complete with spandex woven into the cotton twill baseball cap, the FlexFit Mid-Pro Baseball Cap is extremely comfortable with a little stretch. Limited supply at this price. Don't be last to the party, get the FlexFit Mid-Pro Cotton Twill Baseball Cap while supplies lasts! Approx. 3 1/2" Crown 2 3/4" Bill/Visor Made of: 98% Cotton 2% Spandex 6-Panel Construction Sewn Eyelets for Ventilation Elasticized Sweatband Closed Back - Stretches to Fit Gray Undervisor Unlined Size: L/XL fits sizes 7 1/4 (L) - 7 5/8 (XL). For Bulk/Wholesale purchase of this hat, CLICK HERE or call us at 1-888-847-4287. |
Close
|
Garment Washed Twill LoPro 7 3/8 to 7 7/8 FlexFit Fitted Baseball Cap |
---|
A 6-panel, low profile fitted baseball cap is one of the most comfortable caps around. Spandex has been woven into the garment washed cotton crown enabling the baseball cap to stretch without disrupting the classic shape. The inner sweatband is also elasticized for an easy fit. There are 6 sewn eyelets on each panel for ventilation. The undervisor of the bill or visor matches the color of the hat. Each FLEXFIT baseball cap has the permacurv® bill/visor, so all the customizing work has been done and all you have to do is simply wear the cap! Approx. 3 1/8" Crown 2 3/4" Bill/Visor Made of: 98% Cotton 2% Spandex Classic 6-Panel Design Low Profile Crown ("LoPro") Sewn Eyelets for Ventilation Cotton Lined 2 Front Panels - For Soft Structure Relaxed Garment Washed Twill Feel Closed Back - Stretches to Fit Elasticized FlexFit Sweatband Size: 7 3/8 - 7 7/8. Stretches to fit sizes 7 3/8 (L) through 7 7/8 (XXL) comfortably. |
Close
|
T3 Cotton Duck Booney Hat - Natural |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection The T3 is the most sought after Tilley Endurables hat, the originale with 40 years of history to back it up. Made of classic cotton duck canvas in the unique booney style with a versatile snap-up brim. Approx. 4" Flat Crown 2 3/4" Brim - Front & Back 2 3/8" Brim - Sides Made of: 100% Cotton Duck Features: * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Keep it on in windy conditions through the wind cord & size cinch system. * Secure your Hat during a steep incline with rear brim loop for clip - loop also holds wind cords when not in use. * Hydrofil® anti-sweat band to wick away moisture. * Weighs 5.4 oz/153 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) Finish. * Double Snap-Up Brim. * British Brass Grommets. * OEKO-TEX® certification. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Size(s): 6 7/8 (S) - 8+ (XXXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
Garment Washed Twill LoPro FlexFit Fitted Baseball Cap |
---|
A 6-panel, low profile fitted baseball cap is one of the most comfortable caps around. Spandex has been woven into the garment washed cotton crown enabling the baseball cap to stretch without disrupting the classic shape. The inner sweatband is also elasticized for an easy fit. There are 6 sewn eyelets on each panel for ventilation. The undervisor of the bill or visor matches the color of the hat. Each FLEXFIT baseball cap has the permacurv® bill/visor, so all the customizing work has been done and all you have to do is simply wear the cap! Approx. 3 1/8" Crown 2 3/4" Bill/Visor Made of: 98% Cotton 2% Spandex Classic 6-Panel Design Low Profile Crown ("LoPro") Sewn Eyelets for Ventilation Cotton Lined 2 Front Panels - For Soft Structure Relaxed Garment Washed Twill Feel Closed Back - Stretches to Fit Elasticized FlexFit Sweatband Sizes: S/M fits sizes 6 3/4 (XS) - 7 1/8 (M); L/XL fits sizes 7 1/4 (L) - 7 5/8 (XL). |
Close
|
LTM6 Airflo - Olive Green |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection The Tilley LTM6 AIRFLO® Hat is made from a lightweight 100% recycled nylon with a UPF50+ rating. The bluesign® approved fabric provides excellent UV protection while the mesh surrounding the top of the crown allows for incredible breathability. Approx. 4 3/8" Crown 3 1/4" Front/Back Brim 2 1/2" Side Brim Made of: Body - 100% Nylon Mesh - 100% Polyester Features: * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Underbrim reduces glare from most surfaces. * Keep it on in windy conditions through the wind cord & size cinch system. * Secure your Hat during a steep incline with rear brim loop for clip - loop also holds wind cords when not in use. * Ventilation through mesh insert around the top of the crown. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Lightweight, weighs 4 oz/113 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) finish. * bluesign® Approved. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Sizes: 6 7/8 (S) - 8+ (XXXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file an insurance claim, please click here to be directed to the Tilley returns and exchange page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
Alonso Linen Pub Ivy Cap |
---|
Made in Poland The Alonso Linen Pub Ivy Cap from Stefeno is simple and sharp, serving as a perfect addition to any wardrobe. The classic six-panel crown is unparalleled, and the durable 100% linen body is comfortable and cool. Ending things off, we have the breathable cotton lining, perfect for summer. Another classic by Stefeno! Approx. 9 1/2" Length, Flat 10 1/2" Width, Flat 2" Sewn Bill Made of: 100% Linen Made in Poland 6-Panel Crown Cotton Sweatband Stefeno Tag - Crown Interior Cotton Lining Size(s): S, M, L, XL and XXL - Fits true to size. |
Close
|
LTM6 Airflo Hat - Khaki/Olive |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection The Tilley LTM6 AIRFLO® Hat is made from a lightweight 100% recycled nylon with a UPF50+ rating. The bluesign® approved fabric provides excellent UV protection while the mesh surrounding the top of the crown allows for incredible breathability. Approx. 4 3/8" Crown 3 1/4" Front/Back Brim 2 1/2" Side Brim Made of: Body - 100% Recycled Nylon Mesh - 100% Polyester Features: * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Underbrim reduces glare from most surfaces. * Keep it on in windy conditions through the wind cord & size cinch system. * Secure your Hat during a steep incline with rear brim loop for clip - loop also holds wind cords when not in use. * Ventilation through mesh insert around the top of the crown. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Lightweight, weighs 4 oz/113 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) Finish. * bluesign® Approved Fabric. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Sizes: 6 7/8 (S) - 8+ (XXXL);Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
Combed Twill MidPro FlexFit Fitted 7 3/8 - 8 Baseball Cap |
---|
The traditional 6-panel baseball cap has a fused buckram skeleton that forms the rounded athletic crown. Spandex has been woven into the cotton twill baseball cap to allow for maximum stretch and comfort. Each panel has a tonal thread sewn eyelet for ventilation. The inner elasticized sweatband stretches for fit, just like the cap. The fabric color under the bill/visor is a neutral gray. Each FLEXFIT baseball cap has the permacurv® bill/visor, so all the customizing work has been done and all you have to do is simply wear the cap! This cap will fit up to a size 8! Approx. 4" Crown 2 3/4" Bill/Visor Made of: 63% Polyster 34% Cotton 3% Spandex 6-Panel Design Buckram-Supported Front Panels (2) Top Button Sewn Eyelets Closed Back - Stretches to Fit Gray Undervisor Elastic Sweatband Unlined Size: Fitted - Fits sizes 7 3/8 (L) - 8 (XXXL) comfortably. |
Close
|
Lucca Linen Pub Ivy Cap |
---|
Stefeno presents the Lucca Linen Pub Ivy Cap crafted of light and airy linen perfect for the season! Featuring a sleek six-panel pub/duckbill ivy cap design, the Lucca is finished with a lightweight cotton lining and sweatband with stretch insert for comfort. Keep cool and breezy this spring and summer with the stylish Lucca Linen Pub Ivy Cap by Stefeno! Approx. 10" Length, Flat 10" Width, Flat 2" Sewn Bill Made of: Exterior - 100% Linen Lining - 100% Cotton Pub/Duckbill 6-Panel Design Cotton Sweatband with Stretch Insert - For a Comfortable Fit Cotton Lining Lightweight Breathable Size(s): S, M, L, XL, and XXL. This style fits true to size. |
Close
|
Cool and Dry FlexFit Fitted Baseball Cap |
---|
The traditional 6 panel mid-profile baseball cap has a fused buckram skeleton that forms the rounded athletic crown. Spandex has been fused with the polyester calocks tricot (mesh) to allow for maximum stretch and comfort. Each panel has a tonal thread sewn eyelet for ventilation. The inner elasticized sweatband stretches for fit, just like the baseball cap. The Cool & Dry fabric and sweatband is a performance fabric that transfers moisture away from the wet parts of the baseball cap to areas that dry quickly. The fabric color under the bill/visor is a neutral gray. Each FLEXFIT ballcap has the permacurv® bill or visor, so all the customizing work has been done and all you have to do is simply wear the cap! Approx. 3 1/2" Crown 2 3/4" Bill/Visor Made of: 97% Polyester 3% Spandex 6-Panel Design Buckram-Supported Front Panels (2) Top Button Sewn Eyelets Closed Back - Stretches to Fit Gray Undervisor Elastic Sweatband Unlined Size: One Size Fits Most - Fits sizes 6 7/8 (S) - 7 1/2 (XL). |
Close
|
Hiker Wool Felt Safari Fedora Hat |
---|
Made in Italy Combining the style of a classic safari style with superior Italian craftsmanship, the new Hiker Wool Felt Safari Fedora Hat by Stefeno is in a league of its own. Soft, crushable and water repellent, this wool felt boasts function in addition to good looks. Adorned with a stylish and sophisticated leather and suede hat band, the Hiker Safari will compliment your fall and winter attire beautifully. Approx. 4" Teardrop Crown - Front 3 3/4" Teardrop Crown - Back 2 7/8" Downturned Brim - Front 2 1/2" Downturned Brim - Sides 2 3/4" Downturned Brim - Back Made of: 100% Wool Felt Made in Italy Genuine Leather & Suede Hat Band Cotton Twill Sweatband Unlined Water Repellent Packable / Crushable Underwelt Brim Sizes: S, M, L, XL and XXL |
Close
|
Skip Panama Straw Fedora Hat |
---|
Handwoven in Ecuador; Finished in the USA Classic and stylish, the Stefeno Skip Panama Straw Fedora Hat is everything a panama should be. Handwoven in Ecuador and finished in the USA, this hat features a bubble (elongated teardrop) crown, solid grosgrain ribbon hat band with a colorful feather accent. If you are in search of a classic panama style that will work for an every day look, look no further! Approx. 3 3/4" Elongated Teardrop Crown 2 3/8" Snap Brim Made of: 100% Panama Straw (Toquilla Palm) Grade 3/4 Handwoven in Ecuador Blocked and Finished in the USA Grosgrain Ribbon Hat Band with Bow Side Feather Cotton Twill Sweatband Genuine Panama Sticker - Inside Crown Unlined Size(s): S, M, L, XL and XXL - Fits true to size. |
Close
|
Combed Twill MidPro FlexFit Fitted Baseball Cap |
---|
The traditional 6 panel baseball cap has a fused buckram skeleton that forms the rounded athletic crown. Spandex has been woven into the cotton twill baseball cap to allow for maximum stretch and comfort. Each panel has a tonal thread sewn eyelet for ventilation. The inner elasticized sweatband stretches for fit, just like the cap. The fabric color under the bill/visor is a neutral gray. Each FLEXFIT caseball cap has the permacurv® bill/visor, so all the customizing work has been done and all you have to do is simply wear the cap! Approx. 3 1/2" Crown 2 3/4" Bill/Visor Made of: 63% Polyester 34% Cotton 3% Spandex 6-Panel Design Buckram-Supported Front Panels (2) Top Button Sewn Eyelets Closed Back - Stretches to Fit Gray Undervisor Elastic Sweatband Unlined Sizes: S/M fits sizes 6 3/4 (XS) - 7 1/4 (L); L/XL fits sizes 7 1/8 (M) - 7 5/8 (XL). |
Close
|
TWS1 Paddler Hat - Stone |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection You're ready for any adventure with the TWS1 All Weather Hat from Tilley! This outdoor hat is perfect for any trek, in or out of water. The TWS1 All Weather Hat is ready keep you comfortable with the Schoeller 3x dry fabric C-Change membrane to control temperature when out in the sun, wind, and rain. The best part? It's also very comfortable! Approx. 3 1/4" Crown 2 3/4" Front/Back Brim 2 3/8" Side Brim Made of: 73% Polyester Schoeller® Technologies ecorepel® 27% Polyurethane Schoeller® Technologies ecorepel® Features: * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Underbrim reduces glare from most surfaces. * Wind stability through an extra stiff front brim & plastic wiring around the whole brim. * Keep it on in windy conditions through the wind cord & size cinch system. * Reflective yarns in the wind cords to increase visibility at dusk & dawn. * Secure your Hat while portaging with rear brim loop for clip - loop also holds wind cords when not in use. * Temperature is regulated with Schoeller® Fabric c_change® membrane. * Ventilation through a back vent & side grommets. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Lightweight, weighs 3.2 oz/91 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) finish. * Snap up sides for added wind stability & for added style. * Machine wash cool water, delicate cycle or hand wash; Reshape & air-dry. Size(s): 7 (M) - 7 7/8 (XXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
LTM8 Airflo Mesh Crown Hat |
---|
UPF 50+ Sun Protection The Tilley LTM8 Airflo Mesh Crown Hat is from a lightweight material with a UPF 50+ rating. The bluesign® approved fabric provides excellent UV protection while the mesh surrounding the top of the crown allows for incredible breathability. Approx. 3 3/4" Flat Teardrop Crown 3 1/8" Stitched Flat Brim Made of: Body - 100% Nylon Mesh - 100% Polyester Features: * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Keep it on in windy conditions through the wind cord & size cinch system. * Ventilation through mesh insert around the top of the crown. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Lightweight, weighs 4 oz/113 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) finish. * bluesign® Approved. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Sizes: 6 7/8 (S) - 8+ (XXXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file an insurance claim, please click here to be directed to the Tilley returns and exchange page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
Tonal Cotton Blend Trucker Fitted Baseball Cap |
---|
The Flexfit® Tonal Cotton Blend Trucker Fitted Baseball Cap combines the ever-trendy trucker cap and the brand's signature spandex material for a one of a kind baseball cap. The mesh provides a responsive fit while the front panels are buckram-supported. A silver undervisor on the permacurv® bill/visor, and inner elasticized sweatband that stretches to fit, make this cap a simple wear! Approx. 4" Crown 2 3/4" Bill/Visor Made of: 55% Polyester 43% Cotton 2% P.U. Spandex 6-Panel Design Mesh Back Panels (4) Buckram-Supported Front Panels (2) Top Button Sewn Eyelets Closed Back - Stretches to Fit Gray Undervisor Elastic Sweatband Unlined Size(s): One Size Fits Most; Fits sizes 6 7/8 (S) - 7 1/2 (XL) comfortably. |
Close
|
Vented Crown Panama Straw Fedora Hat |
---|
Handwoven in Ecuador; Finished in the USA Naturally soft, comfortable and lightweight, the Vented Crown Panama Straw Fedora Hat by Stefeno! This refreshing hat is blocked and finished in the USA, featuring a handwoven Panama straw body with a vented crown bringing extra breathability. The grosgrain ribbon hat band and bow are stylish, accented by a colorful feather accesorry. Approx. 3 7/8" Teardrop Crown - Front 3 3/4" Teardrop Crown - Back 2 3/8" Snap Brim Made of: 100% Panama Straw (Toquilla Palm) Grade 3/4 Handwoven in Ecuador Blocked and Finished in the USA Vented Crown Grosgrain Ribbon Hat Band with Bow Feather Accent Cotton Twill Sweatband Genuine Panama Sticker - Inside Crown Unlined Size(s): S, M, L, XL and XXL - Fits true to size. |
Close
|
Carena Brisa Grade 3 Panama Straw Fedora Hat |
---|
Please Note: This style is incorrectly branded "Fernandez y Roche." This is a factory error; the Carena's brand is Stefeno. Handwoven in Ecuador; Blocked & Finished in Spain Classically styled with a contemporary color-blocked hat band, the Carena Brisa Grade 3 Panama Straw Fedora Hat by Stefeno is sure to turn heads. Carena melds the best of both worlds - traditional Ecuadorian artisanship and European styling - in one stylish Panama Fedora. This style is crafted with a center pinch crown and gently down-sloped brim; it is trimmed with a two-toned color-blocked hat band with side bow, metal side pin, and fine woven sweatband. The unisex Carena can do it all - dressy, casual, day, or night - get yours while supplies last! Approx. 4" Pinch Crown 2 1/2" Underwelt Brim Made of: 100% Genuine Panama (Toquilla Palm) Straw Brisa Weave, Grade 3 Artisanally Handwoven in Ecuador Blocked & Finished in Spain Two-Tone Grosgrain Hat Band with Side Bow Metal Side Pin Fine Woven Sweatband Unlined Lightweight Size(s): S, M, L, and XL; fits true to size. New Arrival 2024 |
Close
|
Cool and Dry Pique Mesh Fitted Baseball Cap |
---|
Want a comfortable, lightweight cap, the Flexfit® Cool and Dry Pique Mesh Fitted Baseball Cap is just the ticket thanks to the pique weave fabric. Cool and dry technology are sweat and moisture-wicking will keep you dry and refreshed on your next workout. A silver undervisor on the permacurv® bill/visor and inner elasticized sweatband that stretches to fit make this cap a simple wear! Approx. 4" Crown 2 3/4" Bill/Visor Made of: 99% Polyester 1% P.U. Spandex 6-Panel Design Buckram-Supported Front Panels (2) Top Button Sewn Eyelets Closed Back - Stretches to Fit Gray Undervisor Elastic Sweatband Unlined Size(s): One Size Fits Most; Fits sizes 6 7/8 (S) - 7 1/2 (XL) comfortably. |
Close
|
LTM5 Airflo Hat - Stone |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection The Tilley LTM5 AIRFLO® Hat is designed with a medium brim and polyester mesh in the crown for coolness and comfort during hot days and strenuous activities. The LTM5 AIRFLO® is similar to the LTM6 but has a slimmer profile but the same water repellent finish. Approx. 3 3/4" Crown 2 5/8" Front Brim 2 3/4" Back Brim 2 1/8" Side Brims Made of: Body - 100% Nylon Mesh - 100% Polyester Features: * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks. 98% of harmful UVA/UVB radiation. * Keep it on in windy conditions through the wind cord & size cinch system. * Secure your Hat during a steep incline with rear brim loop for clip - loop also holds wind cords when not in use. * Ventilation through mesh insert around the top of the crown. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Weighs 3 oz/85 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) Finish. * bluesign® Approved. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Sizes: 6 7/8 (S) - 8+ (XXXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
Ultralight DWR Sunshield Neck Flap Baseball Cap |
---|
UPF 50+ Sun Protection The Ultralight DWR Sunshield Neck Flap Baseball Cap is a modern 5-panel design by Tilley Endurables. Has UPF 50+ sun protection, is water repellent, and if that wasn't enough, it also features a removable sun shield cape. Designed for function, this cap also has ventilation eyelets, a DWR finish and an adjustable strap at the back so you can find your best fit. Approx. 2 1/2" 5 Panel Crown 2 3/4" Curved Bill Made of: 94% Recycled Nylon 6% Elastane UPF 50+ Sun Protection Designed in Canada DWR Finish - Durable Water Repellent Quick Drying Eyelets for Ventilation Removable Sun Shield Cape Adjustable Strap - Back Anti-Sweat Sweatband Inseam Taping Mesh Lining Size(s): S/M and L/XL; fits true to size. |
Close
|
TH5 Hemp Hat |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection Made in Canada The TH5 Hemp Hat from TIlley Endurables is natural and tough, built for endurance and longevity. Hemp fabric is very much like cotton, so it breathes extremely well. The nature of this fabric is that it does fade with continuous sun exposure, creating a more unique hat as time goes by. Approx. 3 3/4" Crown 2 5/8" Front Brim 2 3/4" Back Brim 2 1/8" Side Brims Made of: 100% Hemp Fabric Features: * Made in Canada. * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks. 98% of harmful UVA/UVB radiation. * Keep it on in windy conditions through the wind cord & size cinch system. * Secure your Hat during a steep incline with rear brim loop for clip - loop also holds wind cords when not in use. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Weighs 5 oz/150 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) Finish. * OEKO-TEX® certification. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Sizes: 7 (M) - 7 7/8 (XXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
Lambskin Luxe Ascot Cap |
---|
Please Note: The satin lining pattern and colors may vary. Made in Italy Made of smooth and supple lambskin leather, the Lambskin Luxe Ascot Cap by Stefeno is a luxurious take on the classic fabric or straw ascot cap. Unlike standard flat caps, an ascot features a more structured look and finish that hugs the contours of your head. Made in Italy to the highest standards, the Lambskin Luxe Ascot Cap is for those of discerning taste. Approx. 9 1/2" Length 7 3/4" Width 2 1/4" Sewn Bill/Visor Made of: 100% Lambskin Leather Made in Italy Genuine Lambskin Leather Knit Satin Sweatband Satin Lined Sizes: S, M, L, XL and XXL; fits true to size. |
Close
|
Teardrop Wool Felt Trilby Fedora Hat |
---|
Made in Italy Crafted of soft, water repellent and completely crushable wool felt, the new Teardrop Wool Felt Trilby Fedora Hat by Stefeno has a modern take on the classic fedora hat. Its trilby design includes a stouter crown and stingy brim for a smaller overall profile. Its sole accoutrement is its stitched grosgrain ribbon hat band for a clean and sleek look. Fall in love with its hand-made Italian craftsmanship and quality wool felt that's functional in addition to handsome. Approx. 3 7/8" Teardrop Crown - Front 3 5/8" Teardrop Crown - Brim 1 5/8" Underwelt, Snap Brim Made of: 100% Wool Felt Made in Italy Stitched Grosgrain Ribbon Hat Band with Side Bow Cotton Twill Sweatband Unlined Water Repellent Packable / Crushable Size: S, M, L, XL and XXL; fits true to size. |
Close
|
Waterproof Rain Hat |
---|
Please Note: Sizes run small. See below or call us at 1-888-847-4287 for help with sizing. S = 6 3/4 M = 7 L = 7 1/4 XL = 7 1/2 UPF 50+ Sun Protection Tilley Endurables has taken the basic boonie to the next level with the Waterproof Rain Hat. The seam sealed construction makes this hat rain proof and wind proof, a double whammy when it comes to inclement weather. The snap-up sides help for a more streamlined silhouette and the adjustable reflective wind cord allows for a custom fit. Approx. 3 1/2" Crown 2 1/2" Front/Back Brim 2 1/4" Side Brim Made of: 73% Polyester 27% Polyurethane Features: * Designed in Canada. * UPF 50+ Sun Protection - Tested and Certified. * Rain and Wind Proof - Moisture Wicking and Durable Water Repellency. * DWR (Durable Water Repellent) finish. * Seam Sealed. * Keep it on in windy conditions through the wind cord & size cinch system. * Reflective yarns in the elasticized wind cords to increase visibility at dusk & dawn. * Adjustable Wind Cord with Metal Toggle - For Windy Conditions * Secure your Hat while portaging with rear brim loop for clip - loop also holds wind cords when not in use. * Temperature is regulated with Schoeller® Fabric c_change® membrane. * Hydrofil® anti-sweat band to wick away moisture. * Quick Drying. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Buoyancy - stays afloat in water. * Snap up sides for added wind stability & for added style. * Mesh Lining. * Machine wash cool water, delicate cycle or hand wash; Reshape & air-dry. * Tilley Side Tag. Size(s): S, M, L, and XL; ; runs small, please see disclaimer at the top of the product description. |
Close
|
Golf Ball Hat-Tac |
---|
FINAL SALE Made in the USA Never again worry about your hats becoming misshapen, sagging, or losing their curve, thanks to the Golf Ball Hat-Tac. This revolutionary invention sticks to any surface thanks to the 3M foam adhesive backing, and the fixed curve platform allows hats to comfortably rest in an upright position. With this patented and trademarked design, your ball cap, fedora, or any other piece of headwear will never lose its curve. This is the perfect place to hang your hat! Approx. 45.5 mm High 97 mm Wide 50 mm Deep Made in the USA 3M Foam Adhesive Backing Fixed Curve Platform Golf Ball and Putting Green Print Sturdy and Reliable Works for Hats of All Sizes Manufacturer Instructions for How to Apply: * Prep surface: Take a soft wash cloth with Isopropyl or similar alcohol cleaner to create a nice clean surface for the HAT-TAC™ to stick onto. Our recommendation is to find a smooth clean surface with little texture. * After prepping the surface: Grab the tab sticking out and peel away the red backing with ease. HAT-TAC™ attaches to the wall using a foam medium hold double sided adhesive. * Position: Align your HAT-TAC™ a few centimeters off the wall, making sure to the top so is perfectly level. * Last step: Push softly, just enough to hold the HAT-TAC™ in place on the surface. Take a few steps back to make sure it is exactly where you want it positioned. If the positioning is perfect, push and hold the back side of the HAT-TAC™ to the wall firmly for 30 seconds then wait 30 minutes before hanging a hat. Manufacturer Instructions for How to Remove: * Step One: Firmly grab each side of the HAT-TAC™ with both hands. * Step Two: Slowly wiggle the HAT-TAC™ up and down to separate the adhesive back from the wall. Be careful during this step as removing too fast or incorrectly could peel paint. FINAL SALE |
USA: 1-888-VHS-HATS (1-888-847-4287)
INT'L: +1 619-906-4440 Se habla español
Shop for Hats at VillageHatShop.com | Privacy Policy | Website Accessibility | Site Map
Copyright © 1999-2020 Village Hat Shop: The #1 Source for Hats Online
*ALL SPECIAL OFFERS AND DISCOUNTS
Excludes wholesale/B2B, Certain Brand Restrictions, Special Orders or Where Otherwise Noted.
CONTACT USWe are happy to help! |
1 (888) 847-4287Mon-Sun 8am-4:00pm |