Close
|
Italian Straw Skimmer Hat |
---|
Made in Italy Although superseded by the Panama hat in this century, the Skimmer was for many decades the man's straw hat of choice. The Italian Skimmer by Capas is Made in Italy from 4-ply Koberg straw. This is an authentic, high quality Skimmer hat often assiciated with barber shop quartets, jazz bands, and the like. (Also known as a Boater or Sailor). Approx. 3 1/2" Flat Top Crown 2 1/4" Flat Brim Made of: 100% 4-Ply Koberg Straw Striped Hat Band with Side Bow Firm/Stiff Body Leather Sweatband Lined Sizes: Fitted - Sizes 6 7/8 (S) to 7 3/4 (XXL); fits true to size. |
Close
|
Brushed Twill MidPro FlexFit Fitted Baseball Cap |
---|
The traditional 6-panel baseball cap has a fused buckram skeleton that forms the rounded athletic crown. Spandex has been woven into the brushed cotton twill baseball cap to allow for maximum stretch and comfort. Each panel has a tonal thread sewn eyelet for ventilation. The inner elasticized sweatband stretches for fit, just like the cap. The fabric color under the bill/visor is a neutral gray. Each FLEXFIT baseball cap has the permacurv® bill/visor, so all the customizing work has been done and all you have to do is simply wear the cap! Approx. 3 1/2" Crown 2 3/4" Bill/Visor Made of: 98% Cotton 2% Spandex 6-Panel Design Buckram-Supported Front Panels (2) Top Button Sewn Eyelets Closed Back - Stretches to Fit Gray Undervisor Elastic Sweatband Unlined Sizes: S/M fits sizes 6 3/4 (XS) - 7 1/8 (M); L/XL fits sizes 7 1/4 (L) - 7 5/8 (XL). For Bulk/Wholesale Purchase of this hat CLICK HERE or call us at 1-888-847-4287. |
Close
|
3-Pleat Cotton Puggaree Hat Band |
---|
A new hat band can do wonders to freshen up any old hat, may we suggest the 3-Pleat Cotton Puggaree Hat Band by Capas Headwear. Featuring a multitude of great colors, this pug hat band is made of 100% cotton. Need to dress your hat up in something new? Look no further than the 3-Pleat Cotton Puggaree Hat Band - a fresh new look to your favorite hat! For best results, please follow all instructions for use (below). *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. Approx. 28" Total Length, End to End 1 7/8" Width Made of: 100% Cotton 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! |
Close
|
T3 Cotton Duck Booney Hat - Khaki |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection The T3 is the most sought after Tilley Hat - made of classic cotton duck canvas in the traditional "Aussie" style with a versatile snap-up brim. The original design has 40 years of history, make sure to pay homage with your very own T3. Approx. 4" Crown 2 3/4" Front/Back Brim 2 3/8" Side Brim Made of: 100% Cotton Duck Features: * Guaranteed for life. * Certified sun protection - delivers an UPf of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Keep it on in windy conditions through the wind cord & size cinch system. * Secure your Hat during a steep incline with rear brim loop for clip - loop also holds wind cords when not in use. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Buoyancy - stays afloat in water. * Weighs 5.4 oz/153 grams. * DWR (Durable Water Repellent) Finish. * British brass grommets. * OEKO-TEX® Certification. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Sizes: 6 7/8 (S) - 7 7/8 (XXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
Garment Washed Twill LoPro 7 3/8 to 7 7/8 FlexFit Fitted Baseball Cap |
---|
A 6-panel, low profile fitted baseball cap is one of the most comfortable caps around. Spandex has been woven into the garment washed cotton crown enabling the baseball cap to stretch without disrupting the classic shape. The inner sweatband is also elasticized for an easy fit. There are 6 sewn eyelets on each panel for ventilation. The undervisor of the bill or visor matches the color of the hat. Each FLEXFIT baseball cap has the permacurv® bill/visor, so all the customizing work has been done and all you have to do is simply wear the cap! Approx. 3 1/8" Crown 2 3/4" Bill/Visor Made of: 98% Cotton 2% Spandex Classic 6-Panel Design Low Profile Crown ("LoPro") Sewn Eyelets for Ventilation Cotton Lined 2 Front Panels - For Soft Structure Relaxed Garment Washed Twill Feel Closed Back - Stretches to Fit Elasticized FlexFit Sweatband Size: 7 3/8 - 7 7/8. Stretches to fit sizes 7 3/8 (L) through 7 7/8 (XXL) comfortably. |
Close
|
TY Cotton Twill MidPro FlexFit Fitted Baseball Cap |
---|
The traditional 6 panel baseball cap has a fused buckram skeleton that forms the rounded athletic crown. Complete with spandex woven into the cotton twill baseball cap, the FlexFit Mid-Pro Baseball Cap is extremely comfortable with a little stretch. Limited supply at this price. Don't be last to the party, get the FlexFit Mid-Pro Cotton Twill Baseball Cap while supplies lasts! Approx. 3 1/2" Crown 2 3/4" Bill/Visor Made of: 98% Cotton 2% Spandex 6-Panel Construction Sewn Eyelets for Ventilation Elasticized Sweatband Closed Back - Stretches to Fit Gray Undervisor Unlined Size: L/XL fits sizes 7 1/4 (L) - 7 5/8 (XL). For Bulk/Wholesale purchase of this hat, CLICK HERE or call us at 1-888-847-4287. |
Close
|
T3 Cotton Duck Booney Hat - Natural |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection The T3 is the most sought after Tilley Endurables hat, the originale with 40 years of history to back it up. Made of classic cotton duck canvas in the unique booney style with a versatile snap-up brim. Approx. 4" Flat Crown 2 3/4" Brim - Front & Back 2 3/8" Brim - Sides Made of: 100% Cotton Duck Features: * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Keep it on in windy conditions through the wind cord & size cinch system. * Secure your Hat during a steep incline with rear brim loop for clip - loop also holds wind cords when not in use. * Hydrofil® anti-sweat band to wick away moisture. * Weighs 5.4 oz/153 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) Finish. * Double Snap-Up Brim. * British Brass Grommets. * OEKO-TEX® certification. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Size(s): 6 7/8 (S) - 8+ (XXXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
Garment Washed Twill LoPro FlexFit Fitted Baseball Cap |
---|
A 6-panel, low profile fitted baseball cap is one of the most comfortable caps around. Spandex has been woven into the garment washed cotton crown enabling the baseball cap to stretch without disrupting the classic shape. The inner sweatband is also elasticized for an easy fit. There are 6 sewn eyelets on each panel for ventilation. The undervisor of the bill or visor matches the color of the hat. Each FLEXFIT baseball cap has the permacurv® bill/visor, so all the customizing work has been done and all you have to do is simply wear the cap! Approx. 3 1/8" Crown 2 3/4" Bill/Visor Made of: 98% Cotton 2% Spandex Classic 6-Panel Design Low Profile Crown ("LoPro") Sewn Eyelets for Ventilation Cotton Lined 2 Front Panels - For Soft Structure Relaxed Garment Washed Twill Feel Closed Back - Stretches to Fit Elasticized FlexFit Sweatband Sizes: S/M fits sizes 6 3/4 (XS) - 7 1/8 (M); L/XL fits sizes 7 1/4 (L) - 7 5/8 (XL). |
Close
|
3-Pleat Satin Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a multitude of great colors, the 3-Pleat Satin Puggaree Hat Band will give a fresh new look to your favorite hat. For best results, please follow all instructions for use (below). Approx. 28" Total Length, End to End 2" Width Made of: 100% Satin 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
LTM6 Airflo Hat - Khaki/Olive |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection The Tilley LTM6 AIRFLO® Hat is made from a lightweight 100% recycled nylon with a UPF50+ rating. The bluesign® approved fabric provides excellent UV protection while the mesh surrounding the top of the crown allows for incredible breathability. Approx. 4 3/8" Crown 3 1/4" Front/Back Brim 2 1/2" Side Brim Made of: Body - 100% Recycled Nylon Mesh - 100% Polyester Features: * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Underbrim reduces glare from most surfaces. * Keep it on in windy conditions through the wind cord & size cinch system. * Secure your Hat during a steep incline with rear brim loop for clip - loop also holds wind cords when not in use. * Ventilation through mesh insert around the top of the crown. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Lightweight, weighs 4 oz/113 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) Finish. * bluesign® Approved Fabric. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Sizes: 6 7/8 (S) - 8+ (XXXL);Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
Paisley 3-Pleat Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a classic paisley print in varying colors, the Paisley 3-Pleat Puggaree Hat Band by Capas Headwear will give a colorful new twist to your favorite hat. For best results, please follow all instructions for use (below). Approx. 29" Total Length, End to End 1 7/8" Width Made of: 100% Polyester 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Cool and Dry FlexFit Fitted Baseball Cap |
---|
The traditional 6 panel mid-profile baseball cap has a fused buckram skeleton that forms the rounded athletic crown. Spandex has been fused with the polyester calocks tricot (mesh) to allow for maximum stretch and comfort. Each panel has a tonal thread sewn eyelet for ventilation. The inner elasticized sweatband stretches for fit, just like the baseball cap. The Cool & Dry fabric and sweatband is a performance fabric that transfers moisture away from the wet parts of the baseball cap to areas that dry quickly. The fabric color under the bill/visor is a neutral gray. Each FLEXFIT ballcap has the permacurv® bill or visor, so all the customizing work has been done and all you have to do is simply wear the cap! Approx. 3 1/2" Crown 2 3/4" Bill/Visor Made of: 97% Polyester 3% Spandex 6-Panel Design Buckram-Supported Front Panels (2) Top Button Sewn Eyelets Closed Back - Stretches to Fit Gray Undervisor Elastic Sweatband Unlined Size: One Size Fits Most - Fits sizes 6 7/8 (S) - 7 1/2 (XL). |
Close
|
Lifeguard Toyo Straw Blend Sun Hat |
---|
UPF 50+ Sun Protection Take it easy with the Lifeguard Toyo Straw Blend Sun Hat from Karen Keith! This relaxing hat features a sewn braid toyo straw blend body, as well as a braided faux leather hat band and chin cord, wrapping around the crown. The grosgrain ribbon sweatband is comfortable, and keeps things cool on your head! Approx. 4" Teardrop Crown - Front 3 3/4" Teardrop Crown - Back 5" Floppy Brim Made of: 75% Toyo Straw 25% Polyester UPF 50+ Sun Protection Sewn Braid Straw Body Karen Keith Metal Side Label Braided Faux Leather Hat Band Chin Cord with adjuster Metal Eyelets in Brim Grosgrain Ribbon Sweatband Unlined Sizes: M, L and XL; fits true to size. |
Close
|
Tie Dye Cotton Reversible Bucket Hat |
---|
UPF 50+ Sun Protection Two looks with one hat, now that's a deal...the Tie Dye Cotton Reversible Bucket Hat by Karen Keith. Either sport the tie dye patterned exterior or the solid interior. The choice is yours! Made of 100% cotton with an extra floppy body for maximum comfort. Approx. 3 1/4" Square Crown 2 7/8" Downturned Brim Made of: 100% Cotton UPF 50+ Sun Protection Extra Floppy Body Reversible - Tie Dye Patterned Exterior and Solid Interior Cotton Lining Size(s): S/M and L/XL - Fits true to size. |
Close
|
Combed Twill MidPro FlexFit Fitted Baseball Cap |
---|
The traditional 6 panel baseball cap has a fused buckram skeleton that forms the rounded athletic crown. Spandex has been woven into the cotton twill baseball cap to allow for maximum stretch and comfort. Each panel has a tonal thread sewn eyelet for ventilation. The inner elasticized sweatband stretches for fit, just like the cap. The fabric color under the bill/visor is a neutral gray. Each FLEXFIT caseball cap has the permacurv® bill/visor, so all the customizing work has been done and all you have to do is simply wear the cap! Approx. 3 1/2" Crown 2 3/4" Bill/Visor Made of: 63% Polyester 34% Cotton 3% Spandex 6-Panel Design Buckram-Supported Front Panels (2) Top Button Sewn Eyelets Closed Back - Stretches to Fit Gray Undervisor Elastic Sweatband Unlined Sizes: S/M fits sizes 6 3/4 (XS) - 7 1/4 (L); L/XL fits sizes 7 1/8 (M) - 7 5/8 (XL). |
Close
|
LTM6 Airflo - Olive Green |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection The Tilley LTM6 AIRFLO® Hat is made from a lightweight 100% recycled nylon with a UPF50+ rating. The bluesign® approved fabric provides excellent UV protection while the mesh surrounding the top of the crown allows for incredible breathability. Approx. 4 3/8" Crown 3 1/4" Front/Back Brim 2 1/2" Side Brim Made of: Body - 100% Nylon Mesh - 100% Polyester Features: * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Underbrim reduces glare from most surfaces. * Keep it on in windy conditions through the wind cord & size cinch system. * Secure your Hat during a steep incline with rear brim loop for clip - loop also holds wind cords when not in use. * Ventilation through mesh insert around the top of the crown. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Lightweight, weighs 4 oz/113 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) finish. * bluesign® Approved. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Sizes: 6 7/8 (S) - 8+ (XXXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file an insurance claim, please click here to be directed to the Tilley returns and exchange page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
Tonal Cotton Blend Trucker Fitted Baseball Cap |
---|
The Flexfit® Tonal Cotton Blend Trucker Fitted Baseball Cap combines the ever-trendy trucker cap and the brand's signature spandex material for a one of a kind baseball cap. The mesh provides a responsive fit while the front panels are buckram-supported. A silver undervisor on the permacurv® bill/visor, and inner elasticized sweatband that stretches to fit, make this cap a simple wear! Approx. 4" Crown 2 3/4" Bill/Visor Made of: 55% Polyester 43% Cotton 2% P.U. Spandex 6-Panel Design Mesh Back Panels (4) Buckram-Supported Front Panels (2) Top Button Sewn Eyelets Closed Back - Stretches to Fit Gray Undervisor Elastic Sweatband Unlined Size(s): One Size Fits Most; Fits sizes 6 7/8 (S) - 7 1/2 (XL) comfortably. |
Close
|
Combed Twill MidPro FlexFit Fitted 7 3/8 - 8 Baseball Cap |
---|
The traditional 6-panel baseball cap has a fused buckram skeleton that forms the rounded athletic crown. Spandex has been woven into the cotton twill baseball cap to allow for maximum stretch and comfort. Each panel has a tonal thread sewn eyelet for ventilation. The inner elasticized sweatband stretches for fit, just like the cap. The fabric color under the bill/visor is a neutral gray. Each FLEXFIT baseball cap has the permacurv® bill/visor, so all the customizing work has been done and all you have to do is simply wear the cap! This cap will fit up to a size 8! Approx. 4" Crown 2 3/4" Bill/Visor Made of: 63% Polyster 34% Cotton 3% Spandex 6-Panel Design Buckram-Supported Front Panels (2) Top Button Sewn Eyelets Closed Back - Stretches to Fit Gray Undervisor Elastic Sweatband Unlined Size: Fitted - Fits sizes 7 3/8 (L) - 8 (XXXL) comfortably. |
Close
|
Cool and Dry Pique Mesh Fitted Baseball Cap |
---|
Want a comfortable, lightweight cap, the Flexfit® Cool and Dry Pique Mesh Fitted Baseball Cap is just the ticket thanks to the pique weave fabric. Cool and dry technology are sweat and moisture-wicking will keep you dry and refreshed on your next workout. A silver undervisor on the permacurv® bill/visor and inner elasticized sweatband that stretches to fit make this cap a simple wear! Approx. 4" Crown 2 3/4" Bill/Visor Made of: 99% Polyester 1% P.U. Spandex 6-Panel Design Buckram-Supported Front Panels (2) Top Button Sewn Eyelets Closed Back - Stretches to Fit Gray Undervisor Elastic Sweatband Unlined Size(s): One Size Fits Most; Fits sizes 6 7/8 (S) - 7 1/2 (XL) comfortably. |
Close
|
Cattle Suede Leather Foldaway Drover Hat |
---|
Handmade in the USA UPF 50+ Sun Protection Barmah, the premier Australian outdoor hat maker, presents their Cattle Suede Leather Foldaway Drover Hat handcrafted in the USA using only the best, genuine cattle suede leather. Featuring UPF 50+ sun protection and a water-resistant finish, the Suede Foldaway Drover is also crushable/foldable and comes with its own canvas hat bag. In addition to functionality, this style doesn't skimp on looks - two metal grommets per side and a braided genuine suede leather hat band adorn the crown along with a Barmah metal side pin. The hat's interior is unlined for maximum crushability; a comfort stretch sweatband is provided for comfort. Never get caught without your Barmah hat - get the Cattle Suede Leather Foldaway Drover Hat today! Approx. 3 3/4" Tapered Crown 2 3/4" Flat Brim Made of: 100% Genuine Cattle Suede Leather - Flexible Finish Handmade in the USA UPF 50+ Sun Protection (2) Metal Grommets per Side Braided Genuine Suede Leather Hat Band Barmah Metal Side Pin Tonal Bound Brim Comfort Stretch Sweatband Unlined Crushable / Foldable - Canvas Hat Bag Included! Water Resistant Size(s): S, M, L, XL, and XXL. Fits true to size. New Arrival 2024 |
Close
|
TWS1 Paddler Hat - Stone |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection You're ready for any adventure with the TWS1 All Weather Hat from Tilley! This outdoor hat is perfect for any trek, in or out of water. The TWS1 All Weather Hat is ready keep you comfortable with the Schoeller 3x dry fabric C-Change membrane to control temperature when out in the sun, wind, and rain. The best part? It's also very comfortable! Approx. 3 1/4" Crown 2 3/4" Front/Back Brim 2 3/8" Side Brim Made of: 73% Polyester Schoeller® Technologies ecorepel® 27% Polyurethane Schoeller® Technologies ecorepel® Features: * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Underbrim reduces glare from most surfaces. * Wind stability through an extra stiff front brim & plastic wiring around the whole brim. * Keep it on in windy conditions through the wind cord & size cinch system. * Reflective yarns in the wind cords to increase visibility at dusk & dawn. * Secure your Hat while portaging with rear brim loop for clip - loop also holds wind cords when not in use. * Temperature is regulated with Schoeller® Fabric c_change® membrane. * Ventilation through a back vent & side grommets. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Lightweight, weighs 3.2 oz/91 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) finish. * Snap up sides for added wind stability & for added style. * Machine wash cool water, delicate cycle or hand wash; Reshape & air-dry. Size(s): 7 (M) - 7 7/8 (XXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
American Bison Leather Foldaway Drover Hat |
---|
Please Note: This style fits on the smaller end of each generalized letter size. See below or call us at 1-888-847-4287 for help with sizing. S = 6 3/4 M = 7 L = 7 1/4 XL = 7 1/2 XXL = 7 3/4 Handmade in the USA UPF 50+ Sun Protection Barmah, the premier Australian outdoor hat maker, presents their American Bison Leather Foldaway Drover Hat handcrafted in the USA of the finest genuine American bison leather. Foldable/crushable, water-resistant, and UPF 50+ sun protection in a beautiful and supple leather finish - this style has it all! Trimmings include a braided genuine leather hat band, Barmah metal side pin, two metal grommets on either side of the crown, and a comfort stretch sweatband. Be ready for anything with the American Bison Leather Foldaway Drover Hat by Barmah! Approx. 3 1/2" Tapered Crown 2 3/4" Flat Brim - Front 2 1/2" Flat Brim - Sides 3" Flat Brim - Back Made of: 100% Genuine American Bison Leather - Flexible Finish Handmade in the USA UPF 50+ Sun Protection (2) Metal Grommets per Side Braided Genuine Leather Hat Band Barmah Metal Side Pin Tonal Bound Brim Comfort Stretch Sweatband Unlined Crushable / Foldable - Canvas Hat Bag Included! Water Resistant Size(s): S, M, L, XL, and XXL. This style fits on the smaller end of each generalized letter size. See disclaimer at top of description for details. New Arrival 2024 |
Close
|
LTM5 Airflo Hat - Stone |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection The Tilley LTM5 AIRFLO® Hat is designed with a medium brim and polyester mesh in the crown for coolness and comfort during hot days and strenuous activities. The LTM5 AIRFLO® is similar to the LTM6 but has a slimmer profile but the same water repellent finish. Approx. 3 3/4" Crown 2 5/8" Front Brim 2 3/4" Back Brim 2 1/8" Side Brims Made of: Body - 100% Nylon Mesh - 100% Polyester Features: * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks. 98% of harmful UVA/UVB radiation. * Keep it on in windy conditions through the wind cord & size cinch system. * Secure your Hat during a steep incline with rear brim loop for clip - loop also holds wind cords when not in use. * Ventilation through mesh insert around the top of the crown. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Weighs 3 oz/85 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) Finish. * bluesign® Approved. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Sizes: 6 7/8 (S) - 8+ (XXXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
Seagrass Straw Ascot Cap |
---|
Please Note: This style runs large, see sizing details below or call us at 1-888-847-4287 for help with sizing. S = 7 M = 7 1/4 L = 7 1/2 XL = 7 3/4 Incredibly breathable and lightweight, the Seagrass Straw Ascot Cap by Capas Headwear is unique among straw caps. Featuring an open weave twisted seagrass straw body, this ascot provides shading from the sun while maximizing ventilation. Natural seagrass possesses wonderful color variation that gives the cap a uniquely organic and relaxed look. Approx. 10" Length 8" Width 2" Brim/Bill (Measured from size M) Made of: 100% Seagrass Straw Open Weave Twisted Seagrass Straw Body Cotton Sweatband Unlined Sizes: S, M, L and XL. Sizing runs large, see sizing disclaimer at top of description. |
Close
|
LTM8 Airflo Mesh Crown Hat |
---|
UPF 50+ Sun Protection The Tilley LTM8 Airflo Mesh Crown Hat is from a lightweight material with a UPF 50+ rating. The bluesign® approved fabric provides excellent UV protection while the mesh surrounding the top of the crown allows for incredible breathability. Approx. 3 3/4" Flat Teardrop Crown 3 1/8" Stitched Flat Brim Made of: Body - 100% Nylon Mesh - 100% Polyester Features: * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Keep it on in windy conditions through the wind cord & size cinch system. * Ventilation through mesh insert around the top of the crown. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Lightweight, weighs 4 oz/113 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) finish. * bluesign® Approved. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Sizes: 6 7/8 (S) - 8+ (XXXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file an insurance claim, please click here to be directed to the Tilley returns and exchange page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
TH5 Hemp Hat |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection Made in Canada The TH5 Hemp Hat from TIlley Endurables is natural and tough, built for endurance and longevity. Hemp fabric is very much like cotton, so it breathes extremely well. The nature of this fabric is that it does fade with continuous sun exposure, creating a more unique hat as time goes by. Approx. 3 3/4" Crown 2 5/8" Front Brim 2 3/4" Back Brim 2 1/8" Side Brims Made of: 100% Hemp Fabric Features: * Made in Canada. * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks. 98% of harmful UVA/UVB radiation. * Keep it on in windy conditions through the wind cord & size cinch system. * Secure your Hat during a steep incline with rear brim loop for clip - loop also holds wind cords when not in use. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Weighs 5 oz/150 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) Finish. * OEKO-TEX® certification. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Sizes: 7 (M) - 7 7/8 (XXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
Ultralight DWR Sunshield Neck Flap Baseball Cap |
---|
UPF 50+ Sun Protection The Ultralight DWR Sunshield Neck Flap Baseball Cap is a modern 5-panel design by Tilley Endurables. Has UPF 50+ sun protection, is water repellent, and if that wasn't enough, it also features a removable sun shield cape. Designed for function, this cap also has ventilation eyelets, a DWR finish and an adjustable strap at the back so you can find your best fit. Approx. 2 1/2" 5 Panel Crown 2 3/4" Curved Bill Made of: 94% Recycled Nylon 6% Elastane UPF 50+ Sun Protection Designed in Canada DWR Finish - Durable Water Repellent Quick Drying Eyelets for Ventilation Removable Sun Shield Cape Adjustable Strap - Back Anti-Sweat Sweatband Inseam Taping Mesh Lining Size(s): S/M and L/XL; fits true to size. |
Close
|
Waterproof Rain Hat |
---|
Please Note: Sizes run small. See below or call us at 1-888-847-4287 for help with sizing. S = 6 3/4 M = 7 L = 7 1/4 XL = 7 1/2 UPF 50+ Sun Protection Tilley Endurables has taken the basic boonie to the next level with the Waterproof Rain Hat. The seam sealed construction makes this hat rain proof and wind proof, a double whammy when it comes to inclement weather. The snap-up sides help for a more streamlined silhouette and the adjustable reflective wind cord allows for a custom fit. Approx. 3 1/2" Crown 2 1/2" Front/Back Brim 2 1/4" Side Brim Made of: 73% Polyester 27% Polyurethane Features: * Designed in Canada. * UPF 50+ Sun Protection - Tested and Certified. * Rain and Wind Proof - Moisture Wicking and Durable Water Repellency. * DWR (Durable Water Repellent) finish. * Seam Sealed. * Keep it on in windy conditions through the wind cord & size cinch system. * Reflective yarns in the elasticized wind cords to increase visibility at dusk & dawn. * Adjustable Wind Cord with Metal Toggle - For Windy Conditions * Secure your Hat while portaging with rear brim loop for clip - loop also holds wind cords when not in use. * Temperature is regulated with Schoeller® Fabric c_change® membrane. * Hydrofil® anti-sweat band to wick away moisture. * Quick Drying. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Buoyancy - stays afloat in water. * Snap up sides for added wind stability & for added style. * Mesh Lining. * Machine wash cool water, delicate cycle or hand wash; Reshape & air-dry. * Tilley Side Tag. Size(s): S, M, L, and XL; ; runs small, please see disclaimer at the top of the product description. |
USA: 1-888-VHS-HATS (1-888-847-4287)
INT'L: +1 619-906-4440 Se habla español
Shop for Hats at VillageHatShop.com | Privacy Policy | Website Accessibility | Site Map
Copyright © 1999-2020 Village Hat Shop: The #1 Source for Hats Online
*ALL SPECIAL OFFERS AND DISCOUNTS
Excludes wholesale/B2B, Certain Brand Restrictions, Special Orders or Where Otherwise Noted.
CONTACT USWe are happy to help! |
1 (888) 847-4287Mon-Sun 8am-4:00pm |