Close
|
Cotton Hat Sizer |
---|
Please Note: This item sells as a SINGLE sizing strip in either Black or White. Made in the USA Find yourself in-between hat sizes? Need a better fit? Prefer the added comfort of a cotton sweatband? All this can be achieved with the Cap-Ban-Nu Cotton Hat Sizer ideal for sizing your hat down by half a size! For best results, please follow all instructions for use (below). Instructions: * Remove tape backing from product. * Stick to the front section of the hat's sweatband or whatever area the hat has a loose fit (front, back or sides). You can also place the sizer behind the sweatband, directly onto the hat, or onto the backside of the sweatband. * Discard the used strip when soiled and replace. Approx. 10 3/4" Length 1" Width 2.5 MM Thick Made of: 100% Cotton Jersey Size: One single sizer per pack. One Size Fits Most. |
Close
|
Hoquy Wool Basque Beret |
---|
Made in France - Exclusive to the US Please Note: The Navy Blue color is deep and dark in tone. The iconic Hoquy Beret is known all over the world, made by Héritage par Laulhère, a company that has been in existence since 1840. The design studio and workshops are all located within the foothills of the French Pyrenees, the very last of the producers of the beret in Oloron-Ste-Marie. The origin of the "Basque" beret is actually from the Bearn Shepherds of the same name, Bearn. They first hand knit the beret and then felted the wool in mountain waters to create a hat that protects against the sun and harsh winters. Basque became the more popular term when Napoleon III, noticed it upon the laborers working on his Palais de Biarritz. The quality of the workmanship is evident in this simple but elegant beret. The merino wool is soft but durable and water resistant. The luxe foulard finish to the wool is a characteristic unique only to Héritage par Laulhère's luxe line of Basque berets, including the Hoquy. Approx. 10 1/2" Diameter Measured from size 56cm - diameters are proportional to beret size. Made of: 100% Pure Merino Wool Made in France - Exclusive to the US Impermeable - Water Resistant Cabillou - Center Top Tassel Héritage par Laulhère Side Pin Goat Leather Sweatband with Contrast Leather Piping Satin Lining Custom Hoquy Sewn Inner Label Luxury Box Sizes: 55cm - 64cm; general hat sizes 6 7/8 (S) - 8 (XXXL); fits true to size. |
Close
|
Terry Cloth Hat Sizer |
---|
Please Note: This item sells as a SINGLE sizing strip in either Black or Tan. Made in the USA Find yourself in-between hat sizes? Need a better fit? Prefer the added comfort of a terry cloth sweatband? All this can be achieved with the Cap-Ban-Nu Terry Cloth Hat Sizer that can size your hat down half a size! For best results, please follow all instructions for use (below). Instructions: * Remove tape backing from product. * Stick to the front section of the hat's sweatband or whatever area the hat has a loose fit (front, back or sides). You can also place the sizer behind the sweatband, directly onto the hat, or onto the backside of the sweatband. * Discard the used strip when soiled and replace. Approx. 10 3/4" Length 1 1/8" Width 5 MM Thick Made of: 100% Cotton Terry Cloth Size: One single sizer per pack. One Size Fits Most. |
Close
|
Liberty Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. UPF 50+ Sun Protection Locally based out of San Diego, CA, Hemlock Hat Co brings you their specialty line of functional, outdoor hats that celebrate self-expression. Trimmed and lined with a wide array of fun, original prints, their lifeguard styles allow you to express your personal style while enjoying everything the outdoors has to offer. The new Liberty Straw Lifeguard Hat features their classic straw lifeguard hat body with a American flag-themed binding on brim, lining and Hemlock sewn patch. An adjustable chin cord adds protection during windy conditions; a stretchy and absorbent sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 3/4" Cattleman Crown 4 1/4" Downturned Brim Made of: Body - 100% Handwoven Straw Lining - 100% Polyester UPF 50+ Sun Protection - American Flag Print Fabric Underbrim Designed in California, USA Sewn Hemlock Patch - Front American Flag Print Fabric Binding On Brim Braided Rope Chin Cord with Wooden Adjustor Elastic Sweatband - Stretches to Fit Unlined Crown Size(s): One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 1/4 (L) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
Close
|
Authentique Classic Wool Beret |
---|
Please Note: Laulhere have recently rebranded their items, some pieces will have a satin lining while others will have a cotton lining, linings cannot be selected. Made in France Based in Oloron-Sainte-Marie at the foothills of the Pyrenees, Héritage par Laulhère has withstood the test of time and remains the very last producer of the beret in the region. Since 1840, Héritage par Laulhère's design studio and workshops have remained in their original locations and continue to uphold tradition, quality, culture and heritage above all else. To Héritage par Laulhère, the words "Made in France" remain a proud statement and a promise of the highest quality. The Authentique Classic Wool Beret by Héritage par Laulhère is our newest addition to their line of classic, authentic and traditionally-crafted berets. A simple design; the Authentique is crafted of water-resistant merino wool and features a classic top tassel, sewn inner label, and Héritage par Laulhère side pin. Ideal for men or women, the Authentique is available in a medley of colors for a stylish finish to all your looks! Approx. 11" Diameter Made of: 100% Merino Wool Made in France Merino Wool Water Resistant Héritage par Laulhère Side Pin Cabillou - Center Top Tassel Héritage par Laulhère Label Lined Packable & Crushable Size: One Size Fits Most - Fits sizes 6 3/4 (XS) - 7 1/4 (L) comfortably. |
Close
|
Mariner Rush Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. UPF 50+ Sun Protection Locally based out of San Diego, CA, Hemlock Hat Co brings you their specialty line of functional, outdoor hats that celebrate self-expression. Trimmed and lined with a wide array of fun, original prints, their lifeguard styles allow you to express your personal style while enjoying everything the outdoors has to offer. The new Mariner Rush Straw Lifeguard Hat features their classic straw lifeguard hat body with underwater-themed binding on brim, underbrim and Hemlock sewn patch. An adjustable chin cord adds protection during windy conditions; a stretchy and absorbent sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 3/4" Cattleman Crown 4 1/2" Downturned Brim Made of: Body - 100% Handwoven Rush Straw Lining - 100% Polyester UPF 50+ Sun Protection - Underwater Print Fabric Underbrim Designed in California, USA Sewn Hemlock Patch - Front Underwater Print Fabric Binding On Brim Braided Rope Chin Cord with Wooden Adjustor Elastic Sweatband - Stretches to Fit Unlined Crown Size(s): One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 1/4 (L) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
Close
|
Gard-More Water and Stain Repellent Aerosol Spray |
---|
Made in the USA Effective on a variety of items such as hats, jackets, boots, saddles and materials such as suede, smooth leather and fabric, Bickmore's Gard-More Water & Stain Repellent Aerosol Spray helps prevent damage from perspiration, rain and even grease stains. Gard-More features a light spray that dries quickly and will not change the color, tone or texture of your hat. It protects against scuffing and rub off, so it can be used on other items in your wardrobe. The repellent features no silicone which will not seal pore structure allowing leather, suede and fabric to breathe. Bickmore's Gard-More Water & Stain Repellent is environmentally safe and will not deplete the ozone layer. For best results, follow all manufacturer instructions for use (below). Size: (1) 5.5 Oz Aerosol Spray Can Manufacturer Instructions for Use: * Always check for color-fastness in a hidden area before using. Can be safely used on all colorfast suede, leather and fur/wool felt hats. Not for use on unfinished or rawhide leather. * All items must be clean and dry before treating. Use step 3 for leather & suede items or skip to step 4 for hats. * Leather & Suede Care: Spray can 6-9 inches from surface. Let dry at least 1 hour. Reapply periodically. * Hat Care: Brush hat counter-clockwise. Spray hat 6-9 inches from surface. Rebrush and let dry at least 1 hour. Reapply periodically. Please Note: This item can not be shipped to Canada due to shipping restrictions. |
Close
|
Splash Tie Dye Artisan Rush Straw Lifeguard Hat |
---|
The Splash Tie Dye Artisan Rush Straw Lifeguard Hat by new hat company, Makai Hat Company, features a classic rush straw lifeguard hat body, a tie dye fabric underbrim and a Makai sewn patch at the front. An adjustable chincord adds protection during windy conditions; an elasticzed sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 1/4" Cattleman Crown 4 1/2" Downturned Brim Made of: 100% Rush Straw Flexible Design Sewn Makai Patch - Front Tie Dye Fabric Trimmed Brim Tie Dye Fabric Underbrim Braided Rope Chin Cord with Wooden Adjustor Elasticized Sweatband Unlined Crown Size(s): S/M and L/XL; fits true to size. |
Close
|
Skipper Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. UPF 50+ Sun Protection Locally based out of San Diego, CA, Hemlock Hat Co brings you their specialty line of functional, outdoor hats that celebrate self-expression. Trimmed and lined with a wide array of fun, original prints, their lifeguard styles allow you to express your personal style while enjoying everything the outdoors has to offer. The new Skipper Straw Lifeguard Hat features their classic straw lifeguard hat body with a sea life-themed binding on brim, lining and Hemlock sewn patch. An adjustable chin cord adds protection during windy conditions; a stretchy and absorbent sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 3/4" Cattleman Crown 4 3/8" Downturned Brim Made of: Body - 100% Handwoven Straw Lining - 100% Polyester UPF 50+ Sun Protection - Sea Life Print Fabric Underbrim Designed in California, USA Sewn Hemlock Patch - Front Sea Life Print Fabric Binding On Brim Braided Rope Chin Cord with Wooden Adjustor Elastic Sweatband - Stretches to Fit Unlined Crown Size(s): One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 1/4 (L) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
Close
|
Blackout Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. Locally based out of San Diego, CA, Hemlock Hat Co brings you their specialty line of functional, outdoor hats that celebrate self-expression. Trimmed and lined with a wide array of fun, original prints, their lifeguard styles allow you to express your personal style while enjoying everything the outdoors has to offer. The new Blackout Straw Lifeguard Hat features their classic straw lifeguard hat body with a black-colored trim, lining and Hemlock sewn patch. An adjustable chincord adds protection during windy conditions; a stretchy and absorbent sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 3/4" Cattleman Crown 4 5/8" Downturned Brim Made of: Body - 100% Handwoven Seagrass and Rush Straw Lining - 100% Polyester Designed in California, USA Sewn Hemlock Patch - Front Blackout Print Fabric Trimmed Brim UPF 50+ Blackout Print Fabric Underbrim Braided Rope Chin Cord with Wooden Adjustor Elastic Sweatband - Stretches to Fit Unlined Crown Size(s): One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 1/4 (L) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
Close
|
Campan Wool Basque Beret - Navy Blue |
---|
Please Note: The Navy Blue color is deep and dark in tone. Made in France Based in Oloron-Sainte-Marie at the foothills of the Pyrenees, Héritage par Laulhère has withstood the test of time and remains the very last producer of the beret in the region. Since 1840, Héritage par Laulhère's design studio and workshops have remained in their original locations and continue to uphold tradition, quality, culture and heritage above all else. To Héritage par Laulhère, the words "Made in France" remain a proud statement and a promise of the highest quality. Made of the finest pure Merino wool, the Campan Wool Basque Beret by venerable Héritage par Laulhère is their highest quality luxe Basque beret - higher even than their world-famous Hoquy Basque Beret (sold exclusively in the USA). Weighing in at about 20 grams more than the Hoquy, the Campan undergoes two additional manufacturing processes and their famous luxe foulard finish. The resulting wool is not only luxuriously soft but also handily water resistant. Trimmed with a supple goat leather sweatband, yellow lace and bow, satin lining and custom Campan label, the Campan Wool Basque Beret is the pinnacle of luxury, quality, and tradition in Basque berets. Approx. 11" Diameter Made of: 100% Merino Wool Made in France Impermeable - Water Resistant Authenticated by Maison Laulhère Rivet Cabillou - Top Tassel Héritage par Laulhère Side Pin Goat Leather Sweatband - Yellow Border and Bouffette Custom Sewn Inner Label Satin Lining Size(s): 55cm (S) through 62cm (XXL); fits true to size. |
Close
|
Campan Wool Basque Beret - Black |
---|
Made in France Based in Oloron-Sainte-Marie at the foothills of the Pyrenees, Héritage par Laulhère has withstood the test of time and remains the very last producer of the beret in the region. Since 1840, Héritage par Laulhère's design studio and workshops have remained in their original locations and continue to uphold tradition, quality, culture and heritage above all else. To Héritage par Laulhère, the words "Made in France" remain a proud statement and a promise of the highest quality. Made of the finest pure Merino wool, the Campan Wool Basque Beret by venerable Héritage par Laulhère is their highest quality luxe Basque beret - higher even than their world-famous Hoquy Basque Beret (sold exclusively in the USA). Weighing in at about 20 grams more than the Hoquy, the Campan undergoes two additional manufacturing processes and their famous luxe foulard finish. The resulting wool is not only luxuriously soft but also handily water resistant. Trimmed with a supple goat leather sweatband, yellow lace and bow, satin lining and custom Campan label, the Campan Wool Basque Beret is the pinnacle of luxury, quality, and tradition in Basque berets. Approx. 7/8" Sweatband 10 1/2" Diameter Measured from size 58cm - diameters are proportional to beret size. Made of: 100% Pure Merino Wool Made in France Impermeable - Water Resistant Cabillou - Top Center Tassel Héritage par Laulhère Side Pin Goat Leather Sweatband Yellow Lace and Bow Satin Lining Custom Campan Label Luxury Box Size(s): 55cm (S) through 62cm (XXL); fits true to size. |
Close
|
Toluca Fine Palm Straw Cattlemen Western Hat |
---|
FINAL SALE Made in Mexico Hemlock Hat Co Del Sur collection has designed a western with some genuine flair, the Toluca Fine Palm Straw Cattlemen Western Hat! Simple yet so stylish, this hat is handcrafted hat from Mexico is sporting a cattleman crown and 100% palm straw. The self-straw binding on the brim adds just the right finishing touch! Approx. 4 1/8" Cattleman Crown 4 1/4" Brim Made of: 100% Sustainable Brahea Dulcis Palm Straw Made in Mexico Semi-Stiff Body Hemlock Hat Co Metal Pin Self-Straw Binding on Brim Cotton Twill Sweatband Unlined Size(s): S, M and L; fits true to size. FINAL SALE |
Close
|
Ilargia Lambskin Leather Beret |
---|
Made in France Introducing the Ilargia Lambskin Leather Beret by Heritage par Laulhere. Made in France with 100% authentic lambskin leather, this piece adds a fashionable edge to the classic military-style beret. Featuring a close fitting cut and a lace on the back, inspired by the military berets it borrows from. An enameled rivet with a Maison Laulhere emblem acts as a hallmark of authenticity, ensuring its refined French craftsmanship. Approx. 10 1/4" Diameter Made of: 100% Lambskin Leather Made In France 6 Panel Close Fitting Cut Authentic Lambskin Leather Full Grain Cowhide Headband Adjustable Lace Inspired By Military Berets Laulhere Label – Interior Authenticated By Maison Laulhere Emblem On Enameled Rivet Lined Size(s): S, M, L, and XL; fits true to size. |
Close
|
Wooden Hat Brush |
---|
Made in the USA Bickmore's Wooden Hat Brush will allow you to remove surface dirt, dust, and lint effectively from all types of hats as a solo clean or before going in with a cleaning/conditioning product. The genuine horsehair bristles are firm yet still soft enough for optimal cleaning. Made with non-splinter wood. Use a dark-colored brush for dark hats and a light colored brush for light hats. the perfect addition to any hat collection or cleaning kit. For best results, follow all instructions for use (below). Instructions for Use: * Brush counter-clockwise direction on the top of your hat. * Brush clockwise direction under the brim. * Brush daily. Approx. 5" Length 1 1/2" Height (including bristles) Made of: Brush - 100% Wood Bristles - 100% Horse Hair Made in the USA Wooden Brush Body Genuine Horse Hair Bristles Size: One Size |
Close
|
Kahl Felt Hat Stiffener Spray |
---|
Made in the USA Bickmore's Kahl Hat Stiffener is a special blend of stiffening agents formulated specifically to add the original body and stiffness back to felt hats. Proudly manufactured in the USA, Bickmore's Kahl Hat Stiffener outperforms all other hat stiffeners both in terms of its stiffening ability and gentleness to the tone and texture of the felt. Kahl Hat Stiffener will not affect the tone, texture or color of the hat. It will not turn yellow or flake off. Kahls Hat Stiffener will not affect future hat cleanings, shaping, or reblocking if used properly. For best results, follow all manufacturer instructions for use (below). Size: (1) 8 Fl Oz Spray Bottle Manufacturer Instructions for Use: * Always check for color-fastness in a hidden area before using. * Shake well. * Cover work area with a cloth. * Brush hat to clean surface. * Spray fine mist over entire area, holding bottle 8-10 inches away from the hat. * Allow to dry. * Use steam and reshape hat to desired style. Warning: If you do not steam this product into the hat it will sit on top of the fibers and leave a residue that will chip and flake. Steaming is a priority. Do not saturate, instead follow the procedure a few times. * Repeat above procedure if more body is desired. Please Note: This item can not be shipped to Canada due to shipping restrictions. |
Close
|
Vic Rush Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. UPF 50+ Sun Protection Locally based out of San Diego, CA, Hemlock Hat Co brings you their specialty line of functional, outdoor hats that celebrate self-expression. Trimmed and lined with a wide array of fun, original prints, their lifeguard styles allow you to express your personal style while enjoying everything the outdoors has to offer. The new Siesta Straw Lifeguard Hat features their classic straw lifeguard hat body with cocktail-themed binding on brim, underbrim and Hemlock sewn patch. An adjustable chin cord adds protection during windy conditions; a stretchy and absorbent sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 3/4" Cattleman Crown 4 1/2" Downturned Brim Made of: Body - 100% Handwoven Rush Straw Lining - 100% Polyester UPF 50+ Sun Protection - Tiki Cocktail Print Fabric Underbrim Designed in California, USA Sewn Hemlock Patch - Front Tiki Cocktail Print Fabric Binding On Brim Braided Rope Chin Cord with Wooden Adjustor Elastic Sweatband - Stretches to Fit Unlined Crown Size(s): One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 1/4 (L) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
Close
|
Cobra Wool Military Beret |
---|
Made in France - exclusive to the Village Hat Shop Based in Oloron-Sainte-Marie at the foothills of the Pyrenees, Héritage par Laulhère has withstood the test of time and remains the very last producer of the beret in the region. Since 1840, Héritage par Laulhère's design studio and workshops have remained in their original locations and continue to uphold tradition, quality, culture and heritage above all else. To Héritage par Laulhère, the words "Made in France" remain a proud statement and a promise of the highest quality. Made of pure Merino wool, the Cobra Wool Military Beret by Héritage par Laulhère is a military grade beret of the highest quality. Featuring a water resistant finish, the Cobra has the classic look of a military style beret but with luxe detailing - two side eyelets, supple goat leather sweatband and side tab indicating size, ribbon ties at the back, satin lining and a custom Cobra label. Approx. 10" Diameter Measured from size 56cm - diameters are proportional to beret size. Made of: 100% Pure Merino Wool Made in France Water Resistant Two Side Eyelets Goat Leather Sweatband Ribbon Tie at Back Goat Leather Side Tab Satin Lining Cobra Custom Label Sizes: 55cm - 61cm; general hat sizes 6 7/8 (S) - 7 5/8 (XL); fits true to size. |
Close
|
PFG Statetriot Mesh FlexFit Fitted Baseball Cap |
---|
The PFG Statetriot Mesh FlexFit Fitted Baseball Cap by Columbia Sportswear is part of their Performance Fishing Gear collection and boasts a pre-curved bill and four breathable and stretchy back panels for hours of comfortable wear. Featuring a quirky, fish-inspired patch of the USA, this ball cap boldly declares your love of country ... and fishing, of course! Approx. 5 1/4" 5-Panel Crown 2 3/4" Pre-Curved Bill Made of: Fabric Panels & Bill - 100% Cotton Mesh Back Panels - 95% Polyester, 5% Polyurethane PFG Collection - Performance Fishing Gear 5-Panel Design Fishing-Inspired USA Front Patch Front Buckram-Supported Fabric Panel 4 Mesh Back Panels FlexFit Fitted Elasticized Sweatband Inseam Taping Unlined Sizes: S/M fits sizes 6 5/8 (XS) - 7 (M); L/XL fits sizes 7 1/8 (M) - 7 5/8 (XL); XXL fits sizes 7 3/8 (L) - 8 (XXXL). |
Close
|
Casablanca Rush Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. UPF 50+ Sun Protection Locally based out of San Diego, CA, Hemlock Hat Co brings you their specialty line of functional, outdoor hats that celebrate self-expression. Trimmed and lined with a wide array of fun, original prints, their lifeguard styles allow you to express your personal style while enjoying everything the outdoors has to offer. The new Casablanca Rush Straw Lifeguard Hat features their classic straw lifeguard hat body with a Casablanca-themed binding on brim, lining and Hemlock sewn patch. An adjustable chin cord adds protection during windy conditions; a stretchy and absorbent sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 3/4" Cattleman Crown 4 1/2" Downturned Brim Made of: Body - 100% Handwoven Rush Straw Lining - 100% Polyester UPF 50+ Sun Protection - Tropical Print Fabric Underbrim Designed in California, USA Sewn Hemlock Patch - Front Tropical Print Fabric Binding On Brim Braided Rope Chin Cord with Wooden Adjustor Elastic Sweatband - Stretches to Fit Unlined Crown Size(s): One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 1/4 (L) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
Close
|
Barbados Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. UPF 50+ Sun Protection Locally based out of San Diego, CA, Hemlock Hat Co brings you their specialty line of functional, outdoor hats that celebrate self-expression. Trimmed and lined with a wide array of fun, original prints, their lifeguard styles allow you to express your personal style while enjoying everything the outdoors has to offer. The new Barbados Straw Lifeguard Hat features their classic straw lifeguard hat body with a flower and palm-themed binding on brim, lining and Hemlock sewn patch. An adjustable chin cord adds protection during windy conditions; a stretchy and absorbent sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 3/4" Cattleman Crown 4 1/2" Downturned Brim Made of: Body - 100% Handwoven Straw Lining - 100% Polyester UPF 50+ Sun Protection - Flower and Palm-Themed Fabric Underbrim Designed in California, USA Sewn Hemlock Patch - Front Print Fabric Binding On Brim Braided Rope Chin Cord with Wooden Adjustor Elastic Sweatband - Stretches to Fit Unlined Crown Size(s): One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 1/4 (L) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
Close
|
NuStraw Straw Hat Cleaner |
---|
Made in the USA Bickmore's NuStraw is a gentle formula that removes surface dirt and grime from colorfast straw hats, including most oil and water based stains. Proudly formulated and manufactured in the USA, NuStraw is great for cleaning your entire hat or just spot cleaning. For best results, follow all manufacturer instructions for use (below). Size: (1) 4 Fl Oz Bottle Manufacturer Instructions for Use: * Always check for colorfastness in a hidden area before using. * Shake bottle well before using. * Remove surface dirt with a soft brush. * Pour a small amount of NuStraw on a soft moist sponge. * Rub the spot in a circular motion from the center out. * Wipe the area clean with a clean, damp cloth. FAQ: How often should NuStraw be used? A lot depends on the use and conditions your hat is subject to. It is best to clean a stain as soon as it appears. If you wait before cleaning a stain, it could "set" thus making it very difficult to remove later. What makes NuStraw superior to other cleaners? Formulated specifically for straw hats. The detergent based formula will not leave a chemical cleaning ring or residue which can actually attract dust and dirt. Can remove most oil and water based stains without pulling color. |
Close
|
Blend Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. UPF 50+ Sun Protection Locally based out of San Diego, CA, Hemlock Hat Co brings you their specialty line of functional, outdoor hats that celebrate self-expression. Trimmed and lined with a wide array of fun, original prints, their lifeguard styles allow you to express your personal style while enjoying everything the outdoors has to offer. The new Blend Straw Lifeguard Hat features their classic straw lifeguard hat body with a fruit-themed binding on brim, lining and Hemlock sewn patch. An adjustable chin cord adds protection during windy conditions; a stretchy and absorbent sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 3/4" Cattleman Crown 4 1/2" Downturned Brim Made of: Body - 100% Handwoven Straw Lining - 100% Polyester UPF 50+ Sun Protection - Fruit-Themed Fabric Underbrim Designed in California, USA Sewn Hemlock Patch - Front Print Fabric Binding On Brim Braided Rope Chin Cord with Wooden Adjustor Elastic Sweatband - Stretches to Fit Unlined Crown Size(s): One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 1/4 (L) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
Close
|
Capri Wheat Straw Visor |
---|
Maybe its a messy bun or a low ponytail, the Capri Wheat Straw Visor by Hemlock Hat Co will pair with any do you wear on the go. Made of 100% wheat straw that has been handwoven, making each piece completely unique. Features a soft and breathable linen sweatband with an elastic strap closure at the back. Approx. 2" Open Crown 4 1/2" Bill/Visor Made of: 100% Wheat Straw Handwoven Body Increased UV Resistance Metal Side Pin Linen Sweatband Elastic Strap - Back Unlined Size(s): One Size Fits Most - Fits up to size 7 1/4(L) comfortably. |
Close
|
Squeeze Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. UPF 50+ Sun Protection Locally based out of San Diego, CA, Hemlock Hat Co brings you their specialty line of functional, outdoor hats that celebrate self-expression. Trimmed and lined with a wide array of fun, original prints, their lifeguard styles allow you to express your personal style while enjoying everything the outdoors has to offer. The new Squeeze Straw Lifeguard Hat features their classic straw lifeguard hat body with a citrus-themed trim, lining and Hemlock sewn patch. An adjustable chin cord adds protection during windy conditions; a stretchy and absorbent sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 3/4" Cattleman Crown 4 1/2" Downturned Brim Made of: Body - 100% Handwoven Seagrass and Rush Straw Lining - 100% Polyester Designed in California, USA Sewn Hemlock Patch - Front Citrus Print Fabric Trimmed Brim UPF 50+ Citrus Print Fabric Underbrim Braided Rope Chin Cord with Wooden Adjustor Rust Free Eyelets Elastic Sweatband - Stretches to Fit Unlined Crown Size(s): One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 1/4 (L) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
Close
|
Kids' Sonny Rush Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. UPF 50+ Sun Protection The Kids' Sonny Rush Straw Lifeguard Hat by Hemlock Hat Co features their classic straw lifeguard hat body but for kids! With a sun-themed trim, lining and Hemlock sewn patch. A chin cord with toggle adds protection during windy conditions; a stretchy and adjustable sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4" Cattleman Crown 3 3/4" Downturned Brim Made of: Body - 100% Handwoven Seagrass and Rush Straw Lining - 100% Polyester UPF 50+ Sun Protection - Sun Print Fabric Underbrim Designed in California, USA Sewn Hemlock Patch - Front Sun Print Fabric Trimmed Brim Sun Print Fabric Chin Cord with Toggle Adjustor Rust Free Eyelets Adjustable Elastic Sweatband - Adjusts Via Drawstrings Unlined Crown Size(s): Child - Fits kids ages 2-5 years approximately. Adjusts via drawstring to fit up to size 6 5/8 (53cm) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
Close
|
Kids' Under the Sea Rush Straw Lifeguard Hat |
---|
The Kids' Under the Sea Rush Straw Lifeguard Hat by new hat company, Makai Hat Company, features a classic rush straw lifeguard hat body, a fun under the sea-inspired fabric underbrim and a Makai sewn patch at the front. An adjustable chincord adds protection during windy conditions; an elasticized sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4" Cattleman Crown 3 3/4" Downturned Brim Made of: 100% Rush Straw Flexible Design Sewn Makai Patch - Front Under the Sea-Inspired Fabric Trimmed Brim Under the Sea-Inspired Fabric Underbrim Cotton Break-Away Chin Cord with Plastic Toggle Makai Logo Label Elasticized Sweatband Unlined Crown Ages 4-6+ Size(s): Child - fits ages 4 to 6 years (up to 54 cm). |
Close
|
Bazaar Rush Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. UPF 50+ Sun Protection Locally based out of San Diego, CA, Hemlock Hat Co brings you their specialty line of functional, outdoor hats that celebrate self-expression. Trimmed and lined with a wide array of fun, original prints, their lifeguard styles allow you to express your personal style while enjoying everything the outdoors has to offer. The new Bazaar Rush Straw Lifeguard Hat features their classic straw lifeguard hat body with bazaar-themed binding on brim, underbrim and Hemlock sewn patch. An adjustable chin cord adds protection during windy conditions; a stretchy and absorbent sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 3/4" Cattleman Crown 4 1/2" Downturned Brim Made of: Body - 100% Handwoven Rush Straw Lining - 100% Polyester UPF 50+ Sun Protection - Bazaar Print Fabric Underbrim Designed in California, USA Sewn Hemlock Patch - Front Bazaar Print Fabric Binding On Brim Braided Rope Chin Cord with Wooden Adjustor Elastic Sweatband - Stretches to Fit Unlined Crown Size(s): One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 1/4 (L) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
USA: 1-888-VHS-HATS (1-888-847-4287)
INT'L: +1 619-906-4440 Se habla español
Shop for Hats at VillageHatShop.com | Privacy Policy | Website Accessibility | Site Map
Copyright © 1999-2020 Village Hat Shop: The #1 Source for Hats Online
*ALL SPECIAL OFFERS AND DISCOUNTS
Excludes wholesale/B2B, Certain Brand Restrictions, Special Orders or Where Otherwise Noted.
CONTACT USWe are happy to help! |
1 (888) 847-4287Mon-Sun 8am-4:00pm |