Close
|
3-Pleat Cotton Puggaree Hat Band |
---|
A new hat band can do wonders to freshen up any old hat, may we suggest the 3-Pleat Cotton Puggaree Hat Band by Capas Headwear. Featuring a multitude of great colors, this pug hat band is made of 100% cotton. Need to dress your hat up in something new? Look no further than the 3-Pleat Cotton Puggaree Hat Band - a fresh new look to your favorite hat! For best results, please follow all instructions for use (below). *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. Approx. 28" Total Length, End to End 1 7/8" Width Made of: 100% Cotton 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! |
Close
|
T3 Cotton Duck Booney Hat - Khaki |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection The T3 is the most sought after Tilley Hat - made of classic cotton duck canvas in the traditional "Aussie" style with a versatile snap-up brim. The original design has 40 years of history, make sure to pay homage with your very own T3. Approx. 4" Crown 2 3/4" Front/Back Brim 2 3/8" Side Brim Made of: 100% Cotton Duck Features: * Guaranteed for life. * Certified sun protection - delivers an UPf of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Keep it on in windy conditions through the wind cord & size cinch system. * Secure your Hat during a steep incline with rear brim loop for clip - loop also holds wind cords when not in use. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Buoyancy - stays afloat in water. * Weighs 5.4 oz/153 grams. * DWR (Durable Water Repellent) Finish. * British brass grommets. * OEKO-TEX® Certification. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Sizes: 6 7/8 (S) - 7 7/8 (XXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
Italian Straw Skimmer Hat |
---|
Made in Italy Although superseded by the Panama hat in this century, the Skimmer was for many decades the man's straw hat of choice. The Italian Skimmer by Capas is Made in Italy from 4-ply Koberg straw. This is an authentic, high quality Skimmer hat often assiciated with barber shop quartets, jazz bands, and the like. (Also known as a Boater or Sailor). Approx. 3 1/2" Flat Top Crown 2 1/4" Flat Brim Made of: 100% 4-Ply Koberg Straw Striped Hat Band with Side Bow Firm/Stiff Body Leather Sweatband Lined Sizes: Fitted - Sizes 6 7/8 (S) to 7 3/4 (XXL); fits true to size. |
Close
|
Folding Panama Straw Fedora Hat |
---|
Handwoven in Ecuador, Finished in the USA A classic center dent fedora style is brought to you with the packability of a fine panama hat in the Folding Panama Straw Fedora Hat by San Francisco Hat Co. Rather than the single straw weave that is standard in panama hats, the Folding Panama Straw Fedora Hat is made from two strands of straw rolled together and then woven in order to withstand repeated folding and better retain its shape. Classic styling meets function in the Folding Panama Straw Fedora Hat - a wide brim, adjustable drawstring grosgrain ribbon hat band and moisture wicking CoolMax sweatband all make this the one panama hat you'll ever need! How to Properly Fold Your Panama: * Fold crown along the center. * Fold the brim's sides up toward the crown to make a "taco," see photo included in hat images. * Steam can help you return your hat to its original shape. Tip: Place hat in the bathroom while you shower for easy steaming; smooth back to shape with your fingers. Please Note: *Just like folding a shirt or any other article of clothing creates creases, so will folding your hat. Steaming can help smooth the creases out, but will not fully remove the creases.* *Folding your panama hat will shorten the lifespan of your hat.* Approx. 3 1/2" Center Pinch Crown 3 1/4" Snap Brim Made of: 100% Panama Straw (Toquilla Palm) Handwoven in Ecuador Blocked and Finished in the USA Adjustable Grosgrain Ribbon Hat Band Elasticized COOLMAX® Sweatband - Moisture-Wicking Unlined Packable Sizes: S, M, L and XL; fits true to size. |
Close
|
LTM6 Airflo Hat - Khaki/Olive |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection The Tilley LTM6 AIRFLO® Hat is made from a lightweight 100% recycled nylon with a UPF50+ rating. The bluesign® approved fabric provides excellent UV protection while the mesh surrounding the top of the crown allows for incredible breathability. Approx. 4 3/8" Crown 3 1/4" Front/Back Brim 2 1/2" Side Brim Made of: Body - 100% Recycled Nylon Mesh - 100% Polyester Features: * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Underbrim reduces glare from most surfaces. * Keep it on in windy conditions through the wind cord & size cinch system. * Secure your Hat during a steep incline with rear brim loop for clip - loop also holds wind cords when not in use. * Ventilation through mesh insert around the top of the crown. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Lightweight, weighs 4 oz/113 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) Finish. * bluesign® Approved Fabric. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Sizes: 6 7/8 (S) - 8+ (XXXL);Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
Hoquy Wool Basque Beret |
---|
Made in France - Exclusive to the US Please Note: The Navy Blue color is deep and dark in tone. The iconic Hoquy Beret is known all over the world, made by Héritage par Laulhère, a company that has been in existence since 1840. The design studio and workshops are all located within the foothills of the French Pyrenees, the very last of the producers of the beret in Oloron-Ste-Marie. The origin of the "Basque" beret is actually from the Bearn Shepherds of the same name, Bearn. They first hand knit the beret and then felted the wool in mountain waters to create a hat that protects against the sun and harsh winters. Basque became the more popular term when Napoleon III, noticed it upon the laborers working on his Palais de Biarritz. The quality of the workmanship is evident in this simple but elegant beret. The merino wool is soft but durable and water resistant. The luxe foulard finish to the wool is a characteristic unique only to Héritage par Laulhère's luxe line of Basque berets, including the Hoquy. Approx. 10 1/2" Diameter Measured from size 56cm - diameters are proportional to beret size. Made of: 100% Pure Merino Wool Made in France - Exclusive to the US Impermeable - Water Resistant Cabillou - Center Top Tassel Héritage par Laulhère Side Pin Goat Leather Sweatband with Contrast Leather Piping Satin Lining Custom Hoquy Sewn Inner Label Luxury Box Sizes: 55cm - 64cm; general hat sizes 6 7/8 (S) - 8 (XXXL); fits true to size. |
Close
|
LTM6 Airflo - Olive Green |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection The Tilley LTM6 AIRFLO® Hat is made from a lightweight 100% recycled nylon with a UPF50+ rating. The bluesign® approved fabric provides excellent UV protection while the mesh surrounding the top of the crown allows for incredible breathability. Approx. 4 3/8" Crown 3 1/4" Front/Back Brim 2 1/2" Side Brim Made of: Body - 100% Nylon Mesh - 100% Polyester Features: * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Underbrim reduces glare from most surfaces. * Keep it on in windy conditions through the wind cord & size cinch system. * Secure your Hat during a steep incline with rear brim loop for clip - loop also holds wind cords when not in use. * Ventilation through mesh insert around the top of the crown. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Lightweight, weighs 4 oz/113 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) finish. * bluesign® Approved. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Sizes: 6 7/8 (S) - 8+ (XXXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file an insurance claim, please click here to be directed to the Tilley returns and exchange page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
Heritage Collection 1910s Montana Peak Campaign Wool Felt Hat |
---|
Made in the USA The 1910's saw the advent of a true piece of Americana in the Montana Peak Hat (Campaign Hat). Its popularity "peaked" on September 8th, 1911 when it was adopted by the United States Army. What began as a military standard has since become a symbol of both protection and conservation as uniforms of state troopers and park rangers nationwide. The Montana Peak has run the gamut from civic service to the great outdoors. And as the Great War loomed, the Bollman Hat Company produced these hats in abundance for the U.S. Army. These historical hats are still produced by Bollman today. Approx. 5" Montana Peak Crown 3" Flat Brim Made of: 100% Wool Felt Made in the USA Grosgrain Ribbon Hat Band with Side Bow Badge/Ventilation Eyelets Leather Chincord Printed Leather Sweatband Raw Edge Brim Custom 140th Lining Sizes: S, M, L, and XL; fits true to size. |
Close
|
Paisley 3-Pleat Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a classic paisley print in varying colors, the Paisley 3-Pleat Puggaree Hat Band by Capas Headwear will give a colorful new twist to your favorite hat. For best results, please follow all instructions for use (below). Approx. 29" Total Length, End to End 1 7/8" Width Made of: 100% Polyester 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Joe TechStraw Fedora Hat |
---|
Made in the USA UPF 50+ Sun Protection Designed to most everything the outdoors can throw at you - the Joe TechStraw Fedora Hat by San Francisco Hat Co features a fantastic UPF sun protection rating of 50+ in a lightweight, breathable, packable and water friendly hat. Ideal for hiking, fishing, travel and more, the Joe is proudly made in the USA of San Francisco Hat Co's proprietary hand-spiraled polypropylene TechStraw braid material. Unlike standard straw hats, the Joe TechStraw Fedora Hat retains its shape and remains light when wet. A stylish grosgrain ribbon hat band adjusts at the side for a perfect fit while an incredibly comfortable CoolMax elastic sweatband wicks away sweat. Great looking and fully functional - the Joe TechStraw Fedora Hat by San Francisco Hat Co is the do-it-all hat you've been waiting for! Approx. 3 1/2" Center Pinch Crown 2 5/8" Snap Brim - Front 3" Snap Brim - Sides 2 7/8" Snap Brim - Back Made of: Hand-Spiraled Polypropylene TechStraw Braid UPF 50+ Sun Protection Adjustable Grosgrain Ribbon Hat Band Shock Cord Chin Strap Elasticized COOLMAX® Sweatband - Moisture-Wicking Unlined Light & Breathable Water-Friendly Packable / Crushable Sizes: S, M, L and XL; fits true to size. |
Close
|
Heritage Collection 1900s Homburg |
---|
Made in the USA About the time of Bollman Hat Company's Founder's death in 1900 and beginning of the leadership of his son George W. Bollman, the Homburg hat was taking its place in hat style history. Popularized in England by Edward VII after visiting Germany and bringing one back as a keepsake, the Homburg is one of the oldest formally-styled hats. As the King of England from 1901 to 1910, Edward was known as "The Peacemaker" for his efforts in fostering good relations between England and other European countries. Perhaps the Homburg was a perk of the King's diplomatic successes, but the style enjoyed its own surprising success in Great Britain and in America. The Homburg resurfaced in the 1970's as the "Godfather" and eventually became an early staple of the hip-hop movement. The Bollman Hat Company contributed its own color and flair during each phase of the Homburg's evolution. Bollman was integral to developing the style's current counter-cultural appeal by creating a variety of diverse colors including sugar pink, burnt orange, lime green and lemon yellow. Approx. 4 1/4" Center Dent Crown 2 3/4" Curled Brim Made of: 100% Wool Felt Printed Leather Sweatband Custom 140th Lining Sizes: S, M, L, and XL; fits true to size. |
Close
|
Heritage Collection 1940s Pork Pie Hat |
---|
Made in the USA A standard during Jazz's glory age, the Pork Pie gained relevance during a time of worldly transition, as evidenced by its growing popularity among celebrities and public figures. Physicist Robert Oppenheimer regularly wore a pork pie hat during his field studies. Jamaican ska artist Laurel Aitken even wrote the tune "Give Me Back My Pork Pie Hat" as a tribute. Its namesake inspired by the British delicacy, the Pork Pie's distinctive dents around the crown and low flat top was a comfortable look in an unsettling time. Dozens of Bollman Hat Company employees gave their lives serving their country in World War II. The third generation of Bollman family now led the Company and kept in touch with employees serving in the military, and provided regular updates to it's workforce at home on those lost in action, in captivity, injured and those returning home. Some of these letters have been preserved and hang in the hall of the Company's main office today. Approx. 3 1/2" Telescope Crown 2" Underwelt Snap Brim Made of: 100% Wool Felt Printed Leather Sweatband Custom 140th Lining Sizes: S, M, L, and XL; fits true to size. |
Close
|
Panama Straw Wide Brim Hat |
---|
Handwoven in Ecuador; Finished in the USA UPF 50+ Sun Protection Featuring an extra wide 5-inch brim and a sun protection rating of UPF 50+, the Panama Straw Wide Brim Hat by San Francisco Hat Co leaves the competition behind when it comes to stylish, lightweight and functional sun protection. A genuine panama hat, the Wide Brim Panama Hat is handwoven by master artisans in Ecuador and blocked and finished in the USA. Its tight crown and brim weave protect you from the sun's rays while the decorative venting around the crown ensure a breathable wear. A stylish twisted leather band accents the crown and pulls through the brim to form a practical chincord. The San Francisco Hat Co's Panama Straw Wide Brim Hat - unsurpassed style and function in perfect harmony. Approx. 4 1/4" Round Crown 5 3/8" Shapeable Brim Made of: 100% Genuine Panama Straw UPF 50+ Sun Protection Genuine Handwoven Panama Blocked and Finished in the USA Twisted Leather Band & Chincord Unlined Packable Sizes: S, M and L; fits true to size. |
Close
|
LTM3 Airflo Hat - Khaki/Olive |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection The Tilley LTM3 AIRFLO® Hat offers the beloved shape of the T3 Hat with Tilley's incredibly lightweight and durable UPF 50+ nylon fabric with mesh ventilation around its crown for added breathability. Just like the T3, the LTM3 boasts a snap-up brim and classic "Aussie" styling. Approx. 4" Crown 2 3/4" Front/Back Brim 2 3/8" Side Brim Made of: Body - 100% Nylon Mesh - 100% Polyester Features: * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Underbrim reduces glare from most surfaces. * Keep it on in windy conditions through the wind cord & size cinch system. * Secure your Hat during a steep incline with rear brim loop for clip - loop also holds wind cords when not in use. * Ventilation through mesh insert around the top of the crown. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Weighs 4 oz/113 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) Finish. * bluesign® Approved. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Sizes: 6 7/8 (S) - 7 7/8 (XXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
Kids' Wool Felt Derby Hat |
---|
The Kids' Wool Felt Derby Hat is made of 100% wool felt and available in children's sizes. Ideal for formal events, dress up or play time - the Kids' Derby (aka Bowler) Hat can do it all! Featuring the classic trimmings including grosgrain ribbon hat band with side bow and side feather, there is nothing "novelty-ish" about this perfect little gentleman's hat! Approx. 4" Round Crown 2" Curled Brim Made of: 100% Wool Felt - Stiff Finish Grosgrain Ribbon Hat Band (1" Wide) Faux Leather Sweatband Capas Logo Crown Tip Unlined Sizes: Child's S, M, L, and XL. Suggested for: Kids 2-12 Years Old (see chart below): Age Inches CMS Hat Size Size 1 - 2 years 18 7/8 48 6 Small 2 - 4 years 19 5/8 50 6 1/4 Medium 5 - 7 years 20 3/8 52 6 1/2 Large 8 - 12 years 21 7/8 56 7 X-Large |
Close
|
LTM5 Airflo Hat - Olive Green |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection The Tilley LTM5 AIRFLO® Hat is designed with a medium brim and polyester mesh in the crown for coolness and comfort during hot days and strenuous activities. The LTM5 AIRFLO® is made with durable nylon fabric with a water repellent finish. Approx. 3 3/4" Crown 3 1/4" Front Brim 3" Back Brim 2 1/4" Side Brims Made of: Body - 100% Nylon Mesh - 100% Polyester Features: * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks. 98% of harmful UVA/UVB radiation. * Underbrim reduces glare from most surfaces. * Keep it on in windy conditions through the wind cord & size cinch system. * Secure your Hat during a steep incline with rear brim loop for clip - loop also holds wind cords when not in use. * Ventilation through mesh insert around the top of the crown. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Weighs 3 oz/85 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) Finish. * bluesign® Approved. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Sizes: 6 7/8 (S) - 8 (XXXL);Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
Campan Wool Basque Beret - Black |
---|
Made in France Based in Oloron-Sainte-Marie at the foothills of the Pyrenees, Héritage par Laulhère has withstood the test of time and remains the very last producer of the beret in the region. Since 1840, Héritage par Laulhère's design studio and workshops have remained in their original locations and continue to uphold tradition, quality, culture and heritage above all else. To Héritage par Laulhère, the words "Made in France" remain a proud statement and a promise of the highest quality. Made of the finest pure Merino wool, the Campan Wool Basque Beret by venerable Héritage par Laulhère is their highest quality luxe Basque beret - higher even than their world-famous Hoquy Basque Beret (sold exclusively in the USA). Weighing in at about 20 grams more than the Hoquy, the Campan undergoes two additional manufacturing processes and their famous luxe foulard finish. The resulting wool is not only luxuriously soft but also handily water resistant. Trimmed with a supple goat leather sweatband, yellow lace and bow, satin lining and custom Campan label, the Campan Wool Basque Beret is the pinnacle of luxury, quality, and tradition in Basque berets. Approx. 7/8" Sweatband 10 1/2" Diameter Measured from size 58cm - diameters are proportional to beret size. Made of: 100% Pure Merino Wool Made in France Impermeable - Water Resistant Cabillou - Top Center Tassel Héritage par Laulhère Side Pin Goat Leather Sweatband Yellow Lace and Bow Satin Lining Custom Campan Label Luxury Box Size(s): 55cm (S) through 62cm (XXL); fits true to size. |
Close
|
Authentique Classic Wool Beret |
---|
Please Note: Laulhere have recently rebranded their items, some pieces will have a satin lining while others will have a cotton lining, linings cannot be selected. Made in France Based in Oloron-Sainte-Marie at the foothills of the Pyrenees, Héritage par Laulhère has withstood the test of time and remains the very last producer of the beret in the region. Since 1840, Héritage par Laulhère's design studio and workshops have remained in their original locations and continue to uphold tradition, quality, culture and heritage above all else. To Héritage par Laulhère, the words "Made in France" remain a proud statement and a promise of the highest quality. The Authentique Classic Wool Beret by Héritage par Laulhère is our newest addition to their line of classic, authentic and traditionally-crafted berets. A simple design; the Authentique is crafted of water-resistant merino wool and features a classic top tassel, sewn inner label, and Héritage par Laulhère side pin. Ideal for men or women, the Authentique is available in a medley of colors for a stylish finish to all your looks! Approx. 11" Diameter Made of: 100% Merino Wool Made in France Merino Wool Water Resistant Héritage par Laulhère Side Pin Cabillou - Center Top Tassel Héritage par Laulhère Label Lined Packable & Crushable Size: One Size Fits Most - Fits sizes 6 3/4 (XS) - 7 1/4 (L) comfortably. |
Close
|
Heritage Collection 1950s Roy |
---|
Made in the USA The King of the Cowboys, Roy Rogers, was a famous singer and cowboy actor during the days of television. He and his third wife Dale Evans (the Queen of the West), his golden palomino Trigger, and his German Shepard Bullet, were featured in over one hundred movies and The Roy Rogers Show which ran on radio for nine years before moving to television from 1951 through 1957. In post-war America, Roy was the embodiment of the western hero. For the Bollman Hat Company, he was a champion of headwear on both the big and small screen. Roy Rogers visited the Bollman factory in 1960 to express gratitude to Bollman Employees for providing him with his signature hat. It was quite a day in Adamstown as Rogers was a beloved figure. Upon addressing the employees, Roy toured the factory, signed autographs and posed with children from the community. Approx. 4 5/8" C-Crown (Teardrop) 4" Raw Edge Curled Brim Made of: 100% Wool Felt Printed Leather Sweatband Custom 140th Lining Hat Box and Certificate Included Sizes: S, M, L, and XL; fits true to size. |
Close
|
Ultralight DWR Sunshield Neck Flap Baseball Cap |
---|
UPF 50+ Sun Protection The Ultralight DWR Sunshield Neck Flap Baseball Cap is a modern 5-panel design by Tilley Endurables. Has UPF 50+ sun protection, is water repellent, and if that wasn't enough, it also features a removable sun shield cape. Designed for function, this cap also has ventilation eyelets, a DWR finish and an adjustable strap at the back so you can find your best fit. Approx. 2 1/2" 5 Panel Crown 2 3/4" Curved Bill Made of: 94% Recycled Nylon 6% Elastane UPF 50+ Sun Protection Designed in Canada DWR Finish - Durable Water Repellent Quick Drying Eyelets for Ventilation Removable Sun Shield Cape Adjustable Strap - Back Anti-Sweat Sweatband Inseam Taping Mesh Lining Size(s): S/M and L/XL; fits true to size. |
Close
|
Starburst 3-Pleat Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a great new starburst print in varying colors, the Starburst 3-Pleat Puggaree Hat Band by Capas Headwear will give a colorful new twist to your favorite hat. Approx. 29" Total Length, End to End 1 7/8" Width Made of: 100% Polyester Instructions for Use: * Fasten the unfinished end of the pug band on the lower left side of the crown. * Wrap hatband around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hatband closest to the base of the crown. *Traditionally, men's hatbands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! |
Close
|
Heritage Collection 1880s Topper |
---|
Made in the USA The top hat caused a riot the first time it was seen on the streets of London. The perpetrating "haberdasher" was John Hetherington, the hat's designer, who first adorned the style publicly in 1797. According to a contemporary newspaper account, passersby panicked at the sight and ran in terror. Hetherington was hauled into court for wearing "a tall structure having a shining luster calculated to frighten timid people." He was fined £500. By the 1880's, the top hat was worn by men of every station in life for daily and formal wear without fear of fines. Our Founder, George Bollman, wore this style as he worked to grow his factory and advance the craft of hat making. Bollman shaped these hats on five-piece wooden blocks which were cured in ovens. Our most pronounced "hour glass" shapes are still hand blocked and cured in this method today. Approx. 6 1/8 "Hour Glass" Crown 2 3/4" Hand-Shaped Brim Made of: 100% Wool Felt Hand Finished Printed Leather Sweatband Custom 140th Lining Sizes: S, M, L, and XL; fits true to size. |
Close
|
Dapper Side Feather 6-Pack |
---|
Please Note: Feathers and colors are ASSORTED and will vary. Packs CANNOT be customized and are sold as is. The Dapper Side Feather 6-Pack is perfect if you are looking to give your tired and true a little something extra. With our fashion assortment of side feathers, you can pick a feather to match your outfit or use it to give a neutral look a pop of color. The pack comes with an assortment of 6 side feathers in a variety of shapes and color combinations. Just slide the feather behind your hat band and hit the town! Also available in additional assortments Assorted and Fashion. Approx. 3" - 3 3/4" Tall Size(s): One 6-pack of assorted side feathers per order. |
Close
|
Heritage Collection 1900s Gibson Girl Hat |
---|
Made in the USA The Gibson Girl drawings were pen and ink illustrations by Charles Dana Gibson. These illustrations were often considered the first national standard of beauty for women. One of the trends that resulted from the drawings was an affinity for large-crowned, broad brimmed hats with elaborate decorations. The Bollman Gibson Girl illustrates this style with its high squared crown, wide brim, soft navy felt and showy lace hat band tied off in a bow with a matching cream color binding. Approx. 4" Flat Crown 3 1/2" Kettle Curl Brim Made of: 100% Wool Felt Lace Hat Band Tied into a Bow at Back Contrasting Grosgrain Ribbon Binding on Brim Grosgrain Ribbon Sweatband Custom Satin Bollman Lining Hat Box and Certificate Included Sizes: S/M and L/XL; fits true to size. |
Close
|
British Millerain Waxed Cotton Bucket Hat |
---|
Made in Canada UPF 50+ Sun Protection Tilley has introduced a new hat into their iconic line. We welcome the British Millerain Waxed Cotton Bucket Hat, with a material that develops it own unique character over time. This bucket hat is a stalwart as every Tilley is, indestructible, water repellent, as well as being packable. This modern hat was designed with a smaller brim and grommets. Be protected while looking great all the while. Approx. 3 1/4" Square Crown 2 1/8” Downturned Brim Made of: 100% British Millerain Waxed Cotton Features: * Made in Canada. * Certified sun protection - delivers an UPF of 50+ Sun Protection. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Water Repellent. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * British Millerain Waxed Cotton. * Buoyancy - stays afloat in water. * Machine wash delicate or hand wash cold. Use mild detergent. Do not use softeners or bleach. Remove foam from crown pocket before washing. Reshape and air dry. Do not iron. Do not dry clean. Size(s): S, M, L and XL; fits true to size. |
Close
|
LTM2 Airflo Hat - Khaki/Olive |
---|
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size. UPF 50+ Sun Protection With the widest brim offered in the Tilley collection, the LTM2 AIRFLO® Hat is sure to provide ample coverage and comfort. The LTM2 AIRFLO® touts all the Tilley features you've come to expect: UPF 50+ sun protection rating, water repellent finish, moisture-wicking sweatband, is machine washable and much more! Approx. 3 3/4" Crown 3 7/8" Front/Back Brim (double wired for excellent stability) 3 1/2" Side Brim Made of: Body - 100% Nylon Mesh - 100% Polyester Features: * Guaranteed for life. * Certified sun protection - delivers an UPF of 50+. * AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation. * Underbrim reduces glare from most surfaces. * Keep it on in windy conditions through the wind cord & size cinch system. * Secure your Hat during a steep incline with rear brim loop for clip - loop also holds wind cords when not in use. * Ventilation through mesh insert around the top of the crown. * Hydrofil® anti-sweat band to wick away moisture. * Secret pocket - easily stores your ID, credit cards, cash, etc. * Weighs 3.5 oz/99 grams. * Buoyancy - stays afloat in water. * DWR (Durable Water Repellent) Finish. * bluesign® Approved. * Machine wash delicate or hand wash cold, use mild detergent. Reshape and air dry. Do not bleach. Remove wind cord and foam from crown pocket before wash. Do not use softeners. Do not iron. Sizes: 7(M) - 7 7/8 (XXL); Tilley recommends that you select one size larger. Please see size information at top. To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website. To file a Guaranteed for Life request, please click here to be directed to the Tilley Guaranteed for Life page. Please follow the instructions for "Guaranteed for Life", these requests are only accepted via the Tilley website portal. |
Close
|
Vented Toyo Straw Ascot Ivy Cap |
---|
Breathability is your first priority with the Vented Toyo Straw Ascot Ivy Cap from Capas Headwear! This functional cap features an open weave twisted toyo straw body that is reliable and comfortable, especially when paired with the cotton twill sweatband. You'll always look stylish with this cap on your head! Approx. 8 1/2" Diameter 2" Visor Made of: 100% Toyo Straw Woven Straw Body Firm/Stiff Bodyh Cotton Twill Sweatband Unlined Sizes: S, M, L and XL; fits true to size. |
Close
|
Cobra Wool Military Beret |
---|
Made in France - exclusive to the Village Hat Shop Based in Oloron-Sainte-Marie at the foothills of the Pyrenees, Héritage par Laulhère has withstood the test of time and remains the very last producer of the beret in the region. Since 1840, Héritage par Laulhère's design studio and workshops have remained in their original locations and continue to uphold tradition, quality, culture and heritage above all else. To Héritage par Laulhère, the words "Made in France" remain a proud statement and a promise of the highest quality. Made of pure Merino wool, the Cobra Wool Military Beret by Héritage par Laulhère is a military grade beret of the highest quality. Featuring a water resistant finish, the Cobra has the classic look of a military style beret but with luxe detailing - two side eyelets, supple goat leather sweatband and side tab indicating size, ribbon ties at the back, satin lining and a custom Cobra label. Approx. 10" Diameter Measured from size 56cm - diameters are proportional to beret size. Made of: 100% Pure Merino Wool Made in France Water Resistant Two Side Eyelets Goat Leather Sweatband Ribbon Tie at Back Goat Leather Side Tab Satin Lining Cobra Custom Label Sizes: 55cm - 61cm; general hat sizes 6 7/8 (S) - 7 5/8 (XL); fits true to size. |
USA: 1-888-VHS-HATS (1-888-847-4287)
INT'L: +1 619-906-4440 Se habla español
Shop for Hats at VillageHatShop.com | Privacy Policy | Website Accessibility | Site Map
Copyright © 1999-2020 Village Hat Shop: The #1 Source for Hats Online
*ALL SPECIAL OFFERS AND DISCOUNTS
Excludes wholesale/B2B, Certain Brand Restrictions, Special Orders or Where Otherwise Noted.
CONTACT USWe are happy to help! |
1 (888) 847-4287Mon-Sun 8am-4:00pm |