Close
|
3-Pleat Cotton Puggaree Hat Band |
---|
A new hat band can do wonders to freshen up any old hat, may we suggest the 3-Pleat Cotton Puggaree Hat Band by Capas Headwear. Featuring a multitude of great colors, this pug hat band is made of 100% cotton. Need to dress your hat up in something new? Look no further than the 3-Pleat Cotton Puggaree Hat Band - a fresh new look to your favorite hat! For best results, please follow all instructions for use (below). *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. Approx. 28" Total Length, End to End 1 7/8" Width Made of: 100% Cotton 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! |
Close
|
Braided Leather Chin Strap |
---|
The Village Hat Shop presents the Braided Leather Chin Strap, the best method to ensure against the loss of your hat in wind or brush. Chin cord/straps, known in cattle country as stampede strings, provide security and assurance your hat will stay put. This chin cord/strap is practical, and the genuine leather looks fantastic, and built to last. Anyone who wants to keep their hat from blowing away will find it useful. Featuring a sliding wood bead that joins together two, four plait braids of leather, adjustable for total comfort. The Braided Leather Chin Strap works with a variety of hats, it's so easy to install, you'll want one for every hat you own. For best results, please follow all instructions for use (below). Instructions for Use: * Hold the cotter pins tightly together and push them through the stitching where the sweatband meets the body. * Pull the pins completely through the base of the sweatband until the braid is firmly against the sweatband. * Spread and bend the pins outward, as close to horizontal as possible. * Once bent, the pins provide a secure attachment of the chin strap. Approx. 22" Length (Excluding End Pins) Made of: 100% Leather Sliding Wood Bead Four Plait Braided Leather on Each Cord/Strap Metal D-Ring Attachments Metal Cotter Pins Size: One Size Fits Most |
Close
|
3-Pleat Satin Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a multitude of great colors, the 3-Pleat Satin Puggaree Hat Band will give a fresh new look to your favorite hat. For best results, please follow all instructions for use (below). Approx. 28" Total Length, End to End 2" Width Made of: 100% Satin 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Paisley 3-Pleat Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a classic paisley print in varying colors, the Paisley 3-Pleat Puggaree Hat Band by Capas Headwear will give a colorful new twist to your favorite hat. For best results, please follow all instructions for use (below). Approx. 29" Total Length, End to End 1 7/8" Width Made of: 100% Polyester 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Cool and Dry FlexFit Fitted Baseball Cap |
---|
The traditional 6 panel mid-profile baseball cap has a fused buckram skeleton that forms the rounded athletic crown. Spandex has been fused with the polyester calocks tricot (mesh) to allow for maximum stretch and comfort. Each panel has a tonal thread sewn eyelet for ventilation. The inner elasticized sweatband stretches for fit, just like the baseball cap. The Cool & Dry fabric and sweatband is a performance fabric that transfers moisture away from the wet parts of the baseball cap to areas that dry quickly. The fabric color under the bill/visor is a neutral gray. Each FLEXFIT ballcap has the permacurv® bill or visor, so all the customizing work has been done and all you have to do is simply wear the cap! Approx. 3 1/2" Crown 2 3/4" Bill/Visor Made of: 97% Polyester 3% Spandex 6-Panel Design Buckram-Supported Front Panels (2) Top Button Sewn Eyelets Closed Back - Stretches to Fit Gray Undervisor Elastic Sweatband Unlined Size: One Size Fits Most - Fits sizes 6 7/8 (S) - 7 1/2 (XL). |
Close
|
Tonal Cotton Blend Trucker Fitted Baseball Cap |
---|
The Flexfit® Tonal Cotton Blend Trucker Fitted Baseball Cap combines the ever-trendy trucker cap and the brand's signature spandex material for a one of a kind baseball cap. The mesh provides a responsive fit while the front panels are buckram-supported. A silver undervisor on the permacurv® bill/visor, and inner elasticized sweatband that stretches to fit, make this cap a simple wear! Approx. 4" Crown 2 3/4" Bill/Visor Made of: 55% Polyester 43% Cotton 2% P.U. Spandex 6-Panel Design Mesh Back Panels (4) Buckram-Supported Front Panels (2) Top Button Sewn Eyelets Closed Back - Stretches to Fit Gray Undervisor Elastic Sweatband Unlined Size(s): One Size Fits Most; Fits sizes 6 7/8 (S) - 7 1/2 (XL) comfortably. |
Close
|
Poly Mesh Mustache Hat Sizer Pack - Black |
---|
Please Note: 1 pack contains 2 individual mustache hat sizers. Find yourself in-between hat sizes? Want your hat to fit your head a big snugger? Prefer the added comfort of a cushioned sweatband? All can be achieved with the Village Hat Shop's own Poly Mesh Hat Sizer Pack that helps size your hat down by 1/2 a size. Feels as cushioned as a pillow and available in black for your convenience. For best results, please follow all instructions for use (below). Instructions: * Peel off the backing from the sizer. * Stick to the front section of the hat's sweatband or whatever area the hat has a loose fit (front, back or sides). You can also place the sizer behind the sweatband, directly onto the hat, or onto the backside of the sweatband. * Discard the used strip when soiled and replace. Approx. 8 1/2" Length 2" Height Made of: 100% Polyester 2-Pack of Mesh Hat Sizers Size(s): One Size Fits Most - 1 pack contains 2 individual hat sizers. For Bulk/Wholesale purchase of this item, CLICK HERE or call us at 1-888-847-4287. |
Close
|
Wool Fashion Beret |
---|
Made of 100% wool, Village Hat Shop brings you the timeless Wool Fashion Beret in a wide assortment of colors. Sleek and simple, this seamless wool beret is topped with a small tonal tassel. Wear it tilted to either side of your head, centered or towards the back - the Wool Fashion Beret adds a touch of effortless French flair to your look! Approx. 11" Diameter Made of: 100% Wool Center Top Tassel Unlined Packable / Crushable Soft Size: One Size Fits Most - Fits up to size 7 1/8 (M) comfortably. For Bulk/Wholesale purchase of this hat, CLICK HERE or call us at 1-888-847-4287. |
Close
|
Cotton Twill 3-Pleat Puggaree Hat Band - Khaki |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a multitude of great colors, the 3-Pleat Puggaree Cotton Twill Hat Band by Village Hat Shop will give a fresh new look to your favorite hat. For best results, please follow all instructions for use (below). Approx. 28" Total Length, End to End 2" Width Made of: 100% Cotton Twill 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Cotton Twill 3-Pleat Puggaree Hat Band - Red |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a multitude of great colors, the 3-Pleat Puggaree Cotton Twill Hat Band by Village Hat Shop will give a fresh new look to your favorite hat. For best results, please follow all instructions for use (below). Approx. 28" Total Length, End to End 2" Width Made of: 100% Cotton Twill 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Felt Hat Brush |
---|
Information from the book Stetson Hats: "Whether vintage or modern, dust your hat daily with a soft-bristled brush. Stiff bristled brushes will tear the felt. Western stores frequently sell hatter's brushes for this dusting job." For the best maintenance and care of your hat(s), use a dark-colored brush for dark hats and a light colored brush for light hats. For best results, please follow all instructions for use (below) or watch the video here. Approx. 10 5/8" Length 3/4" - 1 1/4" Width Made of: 100% Maple Wood 100% Horse Hair Bristles Size: One Size Instructions for Use: * Brush counter-clockwise direction on the top of your hat. * Brush clockwise direction under the brim. * Brush daily. For Bulk/Wholesale purchase of this hat brush, CLICK HERE or call us at 1-888-847-4287. |
Close
|
Six Baseball Cap Carrier |
---|
The Village Hat Shop Six Baseball Cap Carrier provides storage and transport, all in one. It provides headwear collectors a stylish way to transport, store, and protect their baseball caps. This crushproof neoprene case stores six caps and features four eyelets for ventilation, a removable shoulder strap for easy transport, and a convenient double zip closure. The elasticized adjustable straps ensures the lid remains open with ease, unclip the buckles for a complete open display. This is the perfect gift for the baseball cap collector who likes to travel with their favorites! Approx. 11" Height 9" Width 6" Depth Made of: 100% Polyester Fits Up to 6 Caps Stiff, Lightweight Neoprene - Crushproof Reinforced Rubber Handle - Top Metal Eyelets for Ventilation Closes via Double Zipper Adjustable, Removable Shoulder Strap Included Printed VillageHatShop.com Logo Size: One Size; fits up to 6 baseball caps. |
Close
|
Cool and Dry Pique Mesh Fitted Baseball Cap |
---|
Want a comfortable, lightweight cap, the Flexfit® Cool and Dry Pique Mesh Fitted Baseball Cap is just the ticket thanks to the pique weave fabric. Cool and dry technology are sweat and moisture-wicking will keep you dry and refreshed on your next workout. A silver undervisor on the permacurv® bill/visor and inner elasticized sweatband that stretches to fit make this cap a simple wear! Approx. 4" Crown 2 3/4" Bill/Visor Made of: 99% Polyester 1% P.U. Spandex 6-Panel Design Buckram-Supported Front Panels (2) Top Button Sewn Eyelets Closed Back - Stretches to Fit Gray Undervisor Elastic Sweatband Unlined Size(s): One Size Fits Most; Fits sizes 6 7/8 (S) - 7 1/2 (XL) comfortably. |
Close
|
Cotton Twill 3-Pleat Puggaree Hat Band - Navy Blue |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a multitude of great colors, the 3-Pleat Puggaree Cotton Twill Hat Band by Village Hat Shop will give a fresh new look to your favorite hat. For best results, please follow all instructions for use (below). Approx. 28" Total Length, End to End 2" Width Made of: 100% Cotton Twill 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Hard Plastic Western Hat Can Carrier - Black |
---|
Please Note: This item may have gold OR silver tone clasps (gold tone is featured in the photos above). This feature is assorted and hardware color cannot be selected. Made in the USA Traveling with hats can be a burden but the Hard Plastic Western Hat Can/Carrier helps to solve this problem. Your hat sits upon the inner hat rest that can be adjusted to fit any hat size via the wing-nuts on the bottom of the case. The hat then floats on the rest and the brim is safe from damage. Approx. 9" Height 17" Width 16" Depth Made of: Hard Plastic Made in the USA Stiff Plastic - Protect & Store Your Hats! Handle - Lays Flat When Not in Use (2) Metal Clasps - Secure Lid in Place Crown Insert - Adjusts via Wingnuts Under Carrier Fits Hats up to 5" Crown Fits Hats up to 4" Brim Size: One Size - Fits hats up to 5" Crown and 4" Brim. |
Close
|
White Front Trucker Fitted FlexFit Baseball Cap |
---|
The traditional 6-panel baseball cap has a fused buckram skeleton that forms the rounded athletic crown. Spandex has been fused with the polyester mesh to allow for maximum stretch and comfort. The two white front panels have a tonal thread sewn eyelet for ventilation. The inner elasticized sweatband stretches for fit, just like the baseball cap. The fabric color under the bill/visor is a neutral gray. Each FLEXFIT baseball cap has the permacurv® bill/visor, so all the customizing work has been done and all you have to do is simply wear the cap! Approx. 3 1/2" Crown 2 3/4" Bill/Visor Made of: 55% Polyester 43% Cotton 2% Spandex 6-Panel Design Buckram-Supported Front Panels (2) Mesh Back Panels (4) Top Button Sewn Eyelets Closed Back - Stretches to Fit Gray Undervisor Elastic Sweatband Unlined Size: One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 1/2 (XL). |
Close
|
Polka Dot 3-Pleat Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring classic white polka dots against black, brown or navy, the Polka Dot 3-Pleat Puggaree Hat Band by Capas Headwear will add a fresh new twist to your favorite hat. For best results, please follow all instructions for use (below). Approx. 26 1/2" Total Length, End to End 1 7/8" Width Made of: 100% Cotton 3-Pleat Puggaree Hat Band Cotton Twill Fabric Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Cotton Twill 3-Pleat Puggaree Hat Band - Black |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a multitude of great colors, the 3-Pleat Puggaree Cotton Twill Hat Band by Village Hat Shop will give a fresh new look to your favorite hat. Approx. 28" Total Length, End to End 2" Width Made of: 100% Cotton Twill 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Bohemian Seagrass Straw Floppy Sun Hat |
---|
The Bohemian Seagrass Straw Floppy Sun Hat is made of crocheted seagrass straw and trimmed with wooden rings for a casual and natural look. Its crocheted straw design makes the hat lightweight, breathable and packable which are all ideal features in a sun hat. Go ahead and relax; the Bohemian Seagrass Straw Floppy has you (stylishly) covered! Approx. 4" Round Crown 4 3/4" Floppy Brim Made of: 100% Seagrass Straw Crocheted Seagrass Straw Finish Wood Ring Detailed Hat Band Grosgrain Ribbon Sweatband Unlined for Maximum Breathability Packable Size: One Size Fits Most - Fits up to size 7 1/8 (M) comfortably. |
Close
|
Fez Tassel |
---|
With the great assortment of color tassels from the Village Hat Shop, you can now fancify your fez and switch up the fun with your favorite hat! Approx. 11" Long Made of: 100% Polyester |
Close
|
Hard Plastic Single Hat Can Carrier |
---|
Please Note: The larger the hat size, the less space will remain for the brim. Hats larger than 7 3/8 (L) will have less brim space; these will still fit but the brim might need to be curled up a bit. You might consider the Western Hat Can for larger hat sizes and/or wider brims. Made in the USA If you travel and love to wear hats, this is the perfect companion for that beloved accessory. Traveling with hats can be a burden but the Hat Can/Carrier solves this problem. Your hat sits upon the inner hat rest that can be adjusted to fit any hat size via the wing-nuts on the bottom of the case. The hat then floats on the rest and the brim is safe from damage. This is a perfect house for your special hat. Approx. 10" Height 13" Width 11 1/4" Depth Made of: Hard Plastic Made in the USA Stiff Plastic - Protect & Store Your Hats! Handle - Lays Flat When Not in Use 2 Brass Buckles - Secure Lid in Place Crown Insert - Adjusts via Wingnuts Under Carrier Fits Hats up to 7" Crown Fits Hats up to 2 1/4" Brim Size: One Size - Fits hat up to 7" Crown and 2 1/4" Brim. |
Close
|
Solid Cotton Bandana |
---|
FINAL SALE The bandana has been worn by almost everyone at some point in time. This simple piece of fabric can change a person's look in 10 seconds! This 21 1/2" x 21 1/2" square is great as a handkerchief, bandana, face mask, or scarf. Approx. 21 1/2" L x 21 1/2" W Made of: 100% Cotton Solid Bandana Square Size: One Size Fits Most FINAL SALE |
Close
|
Hat Cleaning Sponge |
---|
Made in the USA The Village Hat Shop Hat Cleaning Sponge is the serious hatter's tool of choice when cleaning surface spots on hats. Easily wipes away dirt, dust and grime. It is always used dry and cleans without chemicals. Like a pencil eraser, one carefully rubs the surface spot until it "balls up" and can be brushed away. Can be used on all shades of hats - for best results, use a separate sponge for each different color of hat. For best results, please follow all manufacturer instructions for use (below). Approx. 3 3/4" Length 2 1/8" Width Made of: 100% All Natural Latex Rubber Size: (1) Sponge Manufacturer Instructions for Use: * Always use dry. * Locate the soiled area and gently rub the sponge upon the spot. Any debris can be brushed into a trash receptacle. * When the surface of the sponge becomes clogged with dirt/grime, simply remove a layer by shaving with a razor blade or cutting off the section with a pair of scissors; or replace with a new sponge. * Do not wring out the sponge with water or clean it with any chemicals/cleansers. |
Close
|
Cotton Twill 3-Pleat Puggaree Hat Band - White |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a multitude of great colors, the 3-Pleat Puggaree Cotton Twill Hat Band by Village Hat Shop will give a fresh new look to your favorite hat. For best results, please follow all instructions for use (below). Approx. 28" Total Length, End to End 2" Width Made of: 100% Cotton Twill 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Genuine Government Issue Wool Watch Cap |
---|
Made in the USA This watch cap (also known as a beanie) is NOT the cheap acrylic cap that you find around. Instead, this is watch cap is made to the specifications of the USA Department of Defense. The design, the material, the knitting quality and stitches per inch, the colorfastness, the finished weight, are all as per the USA military requirements. Approx. 9" Height - Flat 6" Width - Flat 3" Cuff Made of: 100% Wool Made in the USA Double-Wall Construction Cuff - Wear Folded Up or Down Size: One Size Fits Most - Stretches to fit up to size 7 3/4 (XXL). For Bulk/Wholesale purchase of this hat, CLICK HERE or call us at 1-888-847-4287. |
Close
|
Printed Cotton Bandana |
---|
FINAL SALE The bandana has been worn by almost everyone at some point in time. This simple piece of fabric can change a person's look in 10 seconds! This 21 1/2" x 21 1/2" square is great as a handkerchief, bandana, face mask, or scarf. Approx. 21 1/2" L x 21 1/2" W Made of: 100% Cotton Patterned Bandana Square Size: One Size Fits Most. FINAL SALE |
Close
|
Finished Leather Cleaning Kit |
---|
Give your beloved leather hats and accessories some much needed TLC with the new Finished Leather Cleaning Kit! Featuring Bickmore's famous Bick 4 leather conditioner and a soft suede and fleece cleaning cloth, this kit includes all you need to care for your leather goods. The Bick 4 conditioner is specially formulated to clean, condition, polish and protect. Don't let your leather hats lose their luster - get your Finished Leather Cleaning Kit today! For best results, follow all manufacturer instructions for use. Accessory Kit Includes: * (1) Bick 4 Leather Conditioner - Specially formulated to clean, condition, polish & protect. * (1) Suede & Fleece Soft Cleaning Cloth Specifications: * Bick 4 Bottle - 2 Fl Oz * Cloth - Approx. 4 1/2" Diameter |
USA: 1-888-VHS-HATS (1-888-847-4287)
INT'L: +1 619-906-4440 Se habla español
Shop for Hats at VillageHatShop.com | Privacy Policy | Website Accessibility | Site Map
Copyright © 1999-2020 Village Hat Shop: The #1 Source for Hats Online
*ALL SPECIAL OFFERS AND DISCOUNTS
Excludes wholesale/B2B, Certain Brand Restrictions, Special Orders or Where Otherwise Noted.
CONTACT USWe are happy to help! |
1 (888) 847-4287Mon-Sun 8am-4:00pm |