Close
|
3-Pleat Cotton Puggaree Hat Band |
---|
A new hat band can do wonders to freshen up any old hat, may we suggest the 3-Pleat Cotton Puggaree Hat Band by Capas Headwear. Featuring a multitude of great colors, this pug hat band is made of 100% cotton. Need to dress your hat up in something new? Look no further than the 3-Pleat Cotton Puggaree Hat Band - a fresh new look to your favorite hat! For best results, please follow all instructions for use (below). *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. Approx. 28" Total Length, End to End 1 7/8" Width Made of: 100% Cotton 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! |
Close
|
Italian Straw Skimmer Hat |
---|
Made in Italy Although superseded by the Panama hat in this century, the Skimmer was for many decades the man's straw hat of choice. The Italian Skimmer by Capas is Made in Italy from 4-ply Koberg straw. This is an authentic, high quality Skimmer hat often assiciated with barber shop quartets, jazz bands, and the like. (Also known as a Boater or Sailor). Approx. 3 1/2" Flat Top Crown 2 1/4" Flat Brim Made of: 100% 4-Ply Koberg Straw Striped Hat Band with Side Bow Firm/Stiff Body Leather Sweatband Lined Sizes: Fitted - Sizes 6 7/8 (S) to 7 3/4 (XXL); fits true to size. |
Close
|
3-Pleat Satin Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a multitude of great colors, the 3-Pleat Satin Puggaree Hat Band will give a fresh new look to your favorite hat. For best results, please follow all instructions for use (below). Approx. 28" Total Length, End to End 2" Width Made of: 100% Satin 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Wool Military Beret with Lambskin Band |
---|
Made in Canada The Wool Military Beret with Lambskin Band is proudly made in North America by the same manufacturer who supplies berets for the American military (Green Berets) as well as for the Royal Air Force of Great Britain. Berets have been a part of the military uniform since the 19th century and are still seen on troops throughout the world today. There are two unique design elements on this beret: * The semi-circle cardboard insert. This enables the wearer to create a sharp angle on the beret, as well as the spot to display your badge, emblem, or pin. * The leather binding (edge) encases a nylon web band that ends in a bow, this is used to adjust the size of the beret. Approx. 9 1/2" Diameter, Flat 3" Half-Moon Insert - Front Made of: 100% Wool Made in Canada Seamless Wool Beret Semi-circle Insert at Front Lambskin Leather Binding Adjustable Nylon Web Band Unlined Sizes: 6 3/4 (54cm, S) - 8 (64cm, XXXL); fits true to size. |
Close
|
Paisley 3-Pleat Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a classic paisley print in varying colors, the Paisley 3-Pleat Puggaree Hat Band by Capas Headwear will give a colorful new twist to your favorite hat. For best results, please follow all instructions for use (below). Approx. 29" Total Length, End to End 1 7/8" Width Made of: 100% Polyester 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Mariner Rush Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. UPF 50+ Sun Protection Locally based out of San Diego, CA, Hemlock Hat Co brings you their specialty line of functional, outdoor hats that celebrate self-expression. Trimmed and lined with a wide array of fun, original prints, their lifeguard styles allow you to express your personal style while enjoying everything the outdoors has to offer. The new Mariner Rush Straw Lifeguard Hat features their classic straw lifeguard hat body with underwater-themed binding on brim, underbrim and Hemlock sewn patch. An adjustable chin cord adds protection during windy conditions; a stretchy and absorbent sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 3/4" Cattleman Crown 4 1/2" Downturned Brim Made of: Body - 100% Handwoven Rush Straw Lining - 100% Polyester UPF 50+ Sun Protection - Underwater Print Fabric Underbrim Designed in California, USA Sewn Hemlock Patch - Front Underwater Print Fabric Binding On Brim Braided Rope Chin Cord with Wooden Adjustor Elastic Sweatband - Stretches to Fit Unlined Crown Size(s): One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 1/4 (L) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
Close
|
Liberty Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. UPF 50+ Sun Protection Locally based out of San Diego, CA, Hemlock Hat Co brings you their specialty line of functional, outdoor hats that celebrate self-expression. Trimmed and lined with a wide array of fun, original prints, their lifeguard styles allow you to express your personal style while enjoying everything the outdoors has to offer. The new Liberty Straw Lifeguard Hat features their classic straw lifeguard hat body with a American flag-themed binding on brim, lining and Hemlock sewn patch. An adjustable chin cord adds protection during windy conditions; a stretchy and absorbent sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 3/4" Cattleman Crown 4 1/4" Downturned Brim Made of: Body - 100% Handwoven Straw Lining - 100% Polyester UPF 50+ Sun Protection - American Flag Print Fabric Underbrim Designed in California, USA Sewn Hemlock Patch - Front American Flag Print Fabric Binding On Brim Braided Rope Chin Cord with Wooden Adjustor Elastic Sweatband - Stretches to Fit Unlined Crown Size(s): One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 1/4 (L) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
Close
|
Blackout Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. Locally based out of San Diego, CA, Hemlock Hat Co brings you their specialty line of functional, outdoor hats that celebrate self-expression. Trimmed and lined with a wide array of fun, original prints, their lifeguard styles allow you to express your personal style while enjoying everything the outdoors has to offer. The new Blackout Straw Lifeguard Hat features their classic straw lifeguard hat body with a black-colored trim, lining and Hemlock sewn patch. An adjustable chincord adds protection during windy conditions; a stretchy and absorbent sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 3/4" Cattleman Crown 4 5/8" Downturned Brim Made of: Body - 100% Handwoven Seagrass and Rush Straw Lining - 100% Polyester Designed in California, USA Sewn Hemlock Patch - Front Blackout Print Fabric Trimmed Brim UPF 50+ Blackout Print Fabric Underbrim Braided Rope Chin Cord with Wooden Adjustor Elastic Sweatband - Stretches to Fit Unlined Crown Size(s): One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 1/4 (L) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
Close
|
Poly Mesh Mustache Hat Sizer Pack - Black |
---|
Please Note: 1 pack contains 2 individual mustache hat sizers. Find yourself in-between hat sizes? Want your hat to fit your head a big snugger? Prefer the added comfort of a cushioned sweatband? All can be achieved with the Village Hat Shop's own Poly Mesh Hat Sizer Pack that helps size your hat down by 1/2 a size. Feels as cushioned as a pillow and available in black for your convenience. For best results, please follow all instructions for use (below). Instructions: * Peel off the backing from the sizer. * Stick to the front section of the hat's sweatband or whatever area the hat has a loose fit (front, back or sides). You can also place the sizer behind the sweatband, directly onto the hat, or onto the backside of the sweatband. * Discard the used strip when soiled and replace. Approx. 8 1/2" Length 2" Height Made of: 100% Polyester 2-Pack of Mesh Hat Sizers Size(s): One Size Fits Most - 1 pack contains 2 individual hat sizers. For Bulk/Wholesale purchase of this item, CLICK HERE or call us at 1-888-847-4287. |
Close
|
Wool Fashion Beret |
---|
Made of 100% wool, Village Hat Shop brings you the timeless Wool Fashion Beret in a wide assortment of colors. Sleek and simple, this seamless wool beret is topped with a small tonal tassel. Wear it tilted to either side of your head, centered or towards the back - the Wool Fashion Beret adds a touch of effortless French flair to your look! Approx. 11" Diameter Made of: 100% Wool Center Top Tassel Unlined Packable / Crushable Soft Size: One Size Fits Most - Fits up to size 7 1/8 (M) comfortably. For Bulk/Wholesale purchase of this hat, CLICK HERE or call us at 1-888-847-4287. |
Close
|
Pistachio Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. UPF 50+ Sun Protection Locally based out of San Diego, CA, Hemlock Hat Co brings you their specialty line of functional, outdoor hats that celebrate self-expression. Trimmed and lined with a wide array of fun, original prints, their lifeguard styles allow you to express your personal style while enjoying everything the outdoors has to offer. The new Pistachio Straw Lifeguard Hat features their classic straw lifeguard hat body with a pistachio-colored binding on brim, lining and Hemlock sewn patch. An adjustable chin cord adds protection during windy conditions; a stretchy and absorbent sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 3/4" Cattleman Crown 4 1/4" Downturned Brim Made of: Body - 100% Handwoven Straw Lining - 100% Polyester UPF 50+ Sun Protection - Pistachio-Colored Fabric Underbrim Designed in California, USA Sewn Hemlock Patch - Front Pistachio-Colored Fabric Binding On Brim Braided Rope Chin Cord with Wooden Adjustor Elastic Sweatband - Stretches to Fit Unlined Crown Size(s): One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 1/4 (L) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
Close
|
Cotton Twill 3-Pleat Puggaree Hat Band - Khaki |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a multitude of great colors, the 3-Pleat Puggaree Cotton Twill Hat Band by Village Hat Shop will give a fresh new look to your favorite hat. For best results, please follow all instructions for use (below). Approx. 28" Total Length, End to End 2" Width Made of: 100% Cotton Twill 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Cotton Twill 3-Pleat Puggaree Hat Band - Navy Blue |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a multitude of great colors, the 3-Pleat Puggaree Cotton Twill Hat Band by Village Hat Shop will give a fresh new look to your favorite hat. For best results, please follow all instructions for use (below). Approx. 28" Total Length, End to End 2" Width Made of: 100% Cotton Twill 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Cotton Twill 3-Pleat Puggaree Hat Band - Red |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a multitude of great colors, the 3-Pleat Puggaree Cotton Twill Hat Band by Village Hat Shop will give a fresh new look to your favorite hat. For best results, please follow all instructions for use (below). Approx. 28" Total Length, End to End 2" Width Made of: 100% Cotton Twill 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Sprout Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. UPF 50+ Sun Protection Locally based out of San Diego, CA, Hemlock Hat Co brings you their specialty line of functional, outdoor hats that celebrate self-expression. Trimmed and lined with a wide array of fun, original prints, their lifeguard styles allow you to express your personal style while enjoying everything the outdoors has to offer. The new Sprout Straw Lifeguard Hat features their classic straw lifeguard hat body with a house plant-themed trim, lining and Hemlock sewn patch. An adjustable chin cord adds protection during windy conditions; a stretchy and absorbent sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 3/4" Cattleman Crown 4 1/2" Downturned Brim Made of: Body - 100% Handwoven Seagrass and Rush Straw Lining - 100% Polyester Designed in California, USA Sewn Hemlock Patch - Front House Plant Print Fabric Trimmed Brim UPF 50+ House Plant Print Fabric Underbrim Braided Rope Chin Cord with Wooden Adjustor Rust Free Eyelets Elastic Sweatband - Stretches to Fit Unlined Crown Size(s): One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 1/4 (L) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
Close
|
Capri Wheat Straw Visor |
---|
Maybe its a messy bun or a low ponytail, the Capri Wheat Straw Visor by Hemlock Hat Co will pair with any do you wear on the go. Made of 100% wheat straw that has been handwoven, making each piece completely unique. Features a soft and breathable linen sweatband with an elastic strap closure at the back. Approx. 2" Open Crown 4 1/2" Bill/Visor Made of: 100% Wheat Straw Handwoven Body Increased UV Resistance Metal Side Pin Linen Sweatband Elastic Strap - Back Unlined Size(s): One Size Fits Most - Fits up to size 7 1/4(L) comfortably. |
Close
|
Maya Rush Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. UPF 50+ Sun Protection Locally based out of San Diego, CA, Hemlock Hat Co brings you their specialty line of functional, outdoor hats that celebrate self-expression. Trimmed and lined with a wide array of fun, original prints, their lifeguard styles allow you to express your personal style while enjoying everything the outdoors has to offer. The new Maya Rush Straw Lifeguard Hat features their classic straw lifeguard hat body with leopard-themed binding on brim, underbrim and Hemlock sewn patch. An adjustable chin cord adds protection during windy conditions; a stretchy and absorbent sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 3/4" Cattleman Crown 4 1/2" Downturned Brim Made of: Body - 100% Handwoven Rush Straw Lining - 100% Polyester UPF 50+ Sun Protection - Leopard/Jungle Print Fabric Underbrim Designed in California, USA Sewn Hemlock Patch - Front Leopard/Jungle Print Fabric Binding On Brim Braided Rope Chin Cord with Wooden Adjustor Elastic Sweatband - Stretches to Fit Unlined Crown Size(s): One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 1/4 (L) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
Close
|
Fortune Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. UPF 50+ Sun Protection Locally based out of San Diego, CA, Hemlock Hat Co brings you their specialty line of functional, outdoor hats that celebrate self-expression. Trimmed and lined with a wide array of fun, original prints, their lifeguard styles allow you to express your personal style while enjoying everything the outdoors has to offer. The new Fortune Straw Lifeguard Hat features their classic straw lifeguard hat body with a koi fish-themed binding on brim, lining and Hemlock sewn patch. An adjustable chin cord adds protection during windy conditions; a stretchy and absorbent sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 3/4" Cattleman Crown 4 1/2" Downturned Brim Made of: Body - 100% Handwoven Straw Lining - 100% Polyester UPF 50+ Sun Protection - Koi Fish-Themed Fabric Underbrim Designed in California, USA Sewn Hemlock Patch - Front Print Fabric Binding On Brim Braided Rope Chin Cord with Wooden Adjustor Elastic Sweatband - Stretches to Fit Unlined Crown Size(s): One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 1/4 (L) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
Close
|
Vic Rush Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. UPF 50+ Sun Protection Locally based out of San Diego, CA, Hemlock Hat Co brings you their specialty line of functional, outdoor hats that celebrate self-expression. Trimmed and lined with a wide array of fun, original prints, their lifeguard styles allow you to express your personal style while enjoying everything the outdoors has to offer. The new Siesta Straw Lifeguard Hat features their classic straw lifeguard hat body with cocktail-themed binding on brim, underbrim and Hemlock sewn patch. An adjustable chin cord adds protection during windy conditions; a stretchy and absorbent sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 3/4" Cattleman Crown 4 1/2" Downturned Brim Made of: Body - 100% Handwoven Rush Straw Lining - 100% Polyester UPF 50+ Sun Protection - Tiki Cocktail Print Fabric Underbrim Designed in California, USA Sewn Hemlock Patch - Front Tiki Cocktail Print Fabric Binding On Brim Braided Rope Chin Cord with Wooden Adjustor Elastic Sweatband - Stretches to Fit Unlined Crown Size(s): One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 1/4 (L) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
Close
|
Polka Dot 3-Pleat Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring classic white polka dots against black, brown or navy, the Polka Dot 3-Pleat Puggaree Hat Band by Capas Headwear will add a fresh new twist to your favorite hat. For best results, please follow all instructions for use (below). Approx. 26 1/2" Total Length, End to End 1 7/8" Width Made of: 100% Cotton 3-Pleat Puggaree Hat Band Cotton Twill Fabric Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Bowie Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. UPF 50+ Sun Protection Locally based out of San Diego, CA, Hemlock Hat Co brings you their specialty line of functional, outdoor hats that celebrate self-expression. Trimmed and lined with a wide array of fun, original prints, their lifeguard styles allow you to express your personal style while enjoying everything the outdoors has to offer. The new Bowie Straw Lifeguard Hat features their classic straw lifeguard hat body with a watercolor-themed binding on brim, lining and Hemlock sewn patch. An adjustable chin cord adds protection during windy conditions; a stretchy and absorbent sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 3/4" Cattleman Crown 4 1/2" Downturned Brim Made of: Body - 100% Handwoven Straw Lining - 100% Polyester UPF 50+ Sun Protection - Watercolor Print Fabric Underbrim Designed in California, USA Sewn Hemlock Patch - Front Watercolor Print Fabric Binding On Brim Braided Rope Chin Cord with Wooden Adjustor Elastic Sweatband - Stretches to Fit Unlined Crown Size(s): One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 1/4 (L) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
Close
|
Casablanca Rush Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. UPF 50+ Sun Protection Locally based out of San Diego, CA, Hemlock Hat Co brings you their specialty line of functional, outdoor hats that celebrate self-expression. Trimmed and lined with a wide array of fun, original prints, their lifeguard styles allow you to express your personal style while enjoying everything the outdoors has to offer. The new Casablanca Rush Straw Lifeguard Hat features their classic straw lifeguard hat body with a Casablanca-themed binding on brim, lining and Hemlock sewn patch. An adjustable chin cord adds protection during windy conditions; a stretchy and absorbent sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 3/4" Cattleman Crown 4 1/2" Downturned Brim Made of: Body - 100% Handwoven Rush Straw Lining - 100% Polyester UPF 50+ Sun Protection - Tropical Print Fabric Underbrim Designed in California, USA Sewn Hemlock Patch - Front Tropical Print Fabric Binding On Brim Braided Rope Chin Cord with Wooden Adjustor Elastic Sweatband - Stretches to Fit Unlined Crown Size(s): One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 1/4 (L) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
Close
|
Harvey Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. UPF 50+ Sun Protection Locally based out of San Diego, CA, Hemlock Hat Co brings you their specialty line of functional, outdoor hats that celebrate self-expression. Trimmed and lined with a wide array of fun, original prints, their lifeguard styles allow you to express your personal style while enjoying everything the outdoors has to offer. The new Harvey Straw Lifeguard Hat features their classic straw lifeguard hat body with a hippie-themed trim, lining and Hemlock sewn patch. An adjustable chin cord adds protection during windy conditions; a stretchy and absorbent sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 3/4" Cattleman Crown 4 1/2" Downturned Brim Made of: Body - 100% Handwoven Seagrass and Rush Straw Lining - 100% Polyester Designed in California, USA Sewn Hemlock Patch - Front Hippie Print Fabric Trimmed Brim UPF 50+ Hippie Print Fabric Underbrim Braided Rope Chin Cord with Wooden Adjustor Rust Free Eyelets Elastic Sweatband - Stretches to Fit Unlined Crown Size(s): One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 1/4 (L) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
Close
|
Bombay Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. UPF 50+ Sun Protection Locally based out of San Diego, CA, Hemlock Hat Co brings you their specialty line of functional, outdoor hats that celebrate self-expression. Trimmed and lined with a wide array of fun, original prints, their lifeguard styles allow you to express your personal style while enjoying everything the outdoors has to offer. The new Bombay Straw Lifeguard Hat features their classic straw lifeguard hat body with a jungle-themed binding on brim, lining and Hemlock sewn patch. An adjustable chin cord adds protection during windy conditions; a stretchy and absorbent sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 3/4" Cattleman Crown 4 1/2" Downturned Brim Made of: Body - 100% Handwoven Straw Lining - 100% Polyester UPF 50+ Sun Protection - Jungle Print Fabric Underbrim Designed in California, USA Sewn Hemlock Patch - Front Jungle Print Fabric Binding On Brim Braided Rope Chin Cord with Wooden Adjustor Elastic Sweatband - Stretches to Fit Unlined Crown Size(s): One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 1/4 (L) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
Close
|
Cotton Twill 3-Pleat Puggaree Hat Band - Black |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a multitude of great colors, the 3-Pleat Puggaree Cotton Twill Hat Band by Village Hat Shop will give a fresh new look to your favorite hat. Approx. 28" Total Length, End to End 2" Width Made of: 100% Cotton Twill 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Fez Tassel |
---|
With the great assortment of color tassels from the Village Hat Shop, you can now fancify your fez and switch up the fun with your favorite hat! Approx. 11" Long Made of: 100% Polyester |
Close
|
Canopy Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. UPF 50+ Sun Protection Locally based out of San Diego, CA, Hemlock Hat Co brings you their specialty line of functional, outdoor hats that celebrate self-expression. Trimmed and lined with a wide array of fun, original prints, their lifeguard styles allow you to express your personal style while enjoying everything the outdoors has to offer. The new Canopy Straw Lifeguard Hat features their classic straw lifeguard hat body with a rainforest-themed trim, lining and Hemlock sewn patch. An adjustable chin cord adds protection during windy conditions; a stretchy and absorbent sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 3/4" Cattleman Crown 4 1/2" Downturned Brim Made of: Body - 100% Handwoven Seagrass and Rush Straw Lining - 100% Polyester Designed in California, USA Sewn Hemlock Patch - Front Rainforest Print Fabric Trimmed Brim UPF 50+ Rainforest Print Fabric Underbrim Braided Rope Chin Cord with Wooden Adjustor Rust Free Eyelets Elastic Sweatband - Stretches to Fit Unlined Crown Size(s): One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 1/4 (L) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
Close
|
Bazaar Rush Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. UPF 50+ Sun Protection Locally based out of San Diego, CA, Hemlock Hat Co brings you their specialty line of functional, outdoor hats that celebrate self-expression. Trimmed and lined with a wide array of fun, original prints, their lifeguard styles allow you to express your personal style while enjoying everything the outdoors has to offer. The new Bazaar Rush Straw Lifeguard Hat features their classic straw lifeguard hat body with bazaar-themed binding on brim, underbrim and Hemlock sewn patch. An adjustable chin cord adds protection during windy conditions; a stretchy and absorbent sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 3/4" Cattleman Crown 4 1/2" Downturned Brim Made of: Body - 100% Handwoven Rush Straw Lining - 100% Polyester UPF 50+ Sun Protection - Bazaar Print Fabric Underbrim Designed in California, USA Sewn Hemlock Patch - Front Bazaar Print Fabric Binding On Brim Braided Rope Chin Cord with Wooden Adjustor Elastic Sweatband - Stretches to Fit Unlined Crown Size(s): One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 1/4 (L) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
USA: 1-888-VHS-HATS (1-888-847-4287)
INT'L: +1 619-906-4440 Se habla español
Shop for Hats at VillageHatShop.com | Privacy Policy | Website Accessibility | Site Map
Copyright © 1999-2020 Village Hat Shop: The #1 Source for Hats Online
*ALL SPECIAL OFFERS AND DISCOUNTS
Excludes wholesale/B2B, Certain Brand Restrictions, Special Orders or Where Otherwise Noted.
CONTACT USWe are happy to help! |
1 (888) 847-4287Mon-Sun 8am-4:00pm |