Close
|
French Pith Helmet |
---|
Please Note: Due to the handmade nature of Pith Helmets, be advised there might be minor imperfections in the construction of the hat. These imperfections do not hinder the look or wear of the helmet. Made in Vietnam This French style pith helmet is the original design from Vietnam. A hundred years ago, the French discovered the advantages of the material used to make these hats. The pith is from trees in northern Vietnam and has properties that make it both a good sun and rain shield. These helmets are handmade in Vietnam using the techniques inherited by the former French occupiers. Please Note: Pith helmets can be immersed in water, whereby the wearer stays cool during use on hot summer days. Please submerge the outside of the helmet carefully, without allowing water to spill into the interior of the helmet. Approx. 4 1/2" Crown 2 3/4" Front and Back Brim 2 1/2" Side Brims Made of: 100% Genuine Pith Handmade Cotton Twill Exterior Composite Leather Decorative Strap Size Adjustable Inner Harness Cotton Poplin Lining Lightweight Dunk in Water to Keep Cool Sizes: S/M fits sizes 6 7/8 (S) to 7 1/4 (L); L/XL* fits sizes 7 1/4 (L) to 7 1/2 (XL); adjusts via a hook and loop ending to the interior sweatband. *Size L/XL was previously sold as the "Big Head" version of this style prior to consolidation. For Bulk/ Wholesale Purchase of this hat, CLICK HERE or call us at 1-888-847-4287. |
Close
|
Indian Pith Helmet |
---|
Please Note: Due to the handmade nature of Pith Helmets, be advised there might be minor imperfections in the construction of the hat. These imperfections do not hinder the look or wear of the helmet. Made in Vietnam This Indian style pith helmet, a.k.a. the Bombay Bowler, is the most popular pith helmet style in North America. These hats are made from the cork, or pith, of trees from northern Vietnam using techniques developed 100 years ago by the French during their occupation. The helmet is functional in both sunny and rainy weather. Please Note: Pith helmets can be immersed in water, whereby the wearer stays cool during use on hot summer days. Please submerge the outside of the helmet carefully, without allowing water to spill into the interior of the helmet. Approx. 4 1/2" Crown 2 1/2" Brim - Front 2 3/4" Brim - Back 2 1/4" Brim - Sides Made of: 100% Genuine Pith Handmade Cotton Twill Exterior Composite Leather Decorative Strap Size Adjustable Inner Harness Cotton Poplin Lining Lightweight Dunk in Water to Keep Cool Sizes: S/M fits sizes 6 7/8 (S) to 7 1/4 (L); L/XL* fits sizes 7 1/4 (L) to 7 3/4 (XXL); adjusts via a hook and loop ending to the interior sweatband. *Size L/XL was previously sold as the "Big Head" version of this style prior to consolidation. For Bulk/Wholesale purchase of this hat, CLICK HERE or call us at 1-888-847-4287. |
Close
|
African Safari Pith Helmet |
---|
Please Note: Due to the handmade nature of Pith Helmets, be advised there might be minor imperfections in the construction of the hat. These imperfections do not hinder the look or wear of the helmet. Made in Vietnam The African Safari Pith Helmet is made from the core (pith) of trees that grow in northern Vietnam. They are handmade one piece at a time. This helmet, like all other pith helmets we carry, is incredible lightweight as the 4-ply wood interior has a low density (similar to balsa wood). This and our other pith helmets can be immersed in water to keep the wearer cool during hot weather. (Please submerge the outside of the helmet carefully, without allowing water to spill into the interior of the helmet.) Featuring a dark khaki cotton twill with a stylish cream pleated hat band, the African Safari Pith Helmet is ready for adventure! Please Note: Pith helmets can be immersed in water, whereby the wearer stays cool during use on hot summer days. Please submerge the outside of the helmet carefully, without allowing water to spill into the interior of the helmet. Approx. 5" Crown 2" Front Brim 2 1/2" Back Brim 2" Side Brims Made of: 100% Genuine Pith Handmade Cotton Twill Exterior Composite Leather Decorative Strap Size Adjustable Inner Harness Cotton Poplin Lining Lightweight Dunk in Water to Keep Cool Sizes: S/M fits up to size 7 1/8 (M); L/XL fits up to size 7 5/8 (XL); adjusts via a hook and loop ending to the interior sweatband. For Bulk/ Wholesale Purchase of this hat, CLICK HERE or call us at 1-888-847-4287. |
Close
|
Terry Cloth Hat Sizer Pack - Black |
---|
Please Note: 1 pack contains 2 individual hat sizers. Find yourself in-between hat sizes? Want your hat to fit your head a big snugger? Prefer the added comfort of a cotton or terry cloth sweatband? All can be achieved with The Village Hat Shop's own Terry Cloth Hat Sizer Packs that help size your hat down by 1/2 a size. Available in either black or white for your convenience. For best results, please follow all instructions for use (below). Approx. 10" Length 1 1/4" Width Made of: 100% Terry Cloth 2-Pack of Terry Cloth Sizers Instructions Size: One Pack (2 sizers per pack) Instructions: * Peel off the backing from the sizer. * Stick to the front section of the hat's sweatband or whatever area the hat has a loose fit (front, back or sides). You can also place the sizer behind the sweatband, directly onto the hat, or onto the backside of the sweatband. * Discard the used strip when soiled and replace. For Bulk/Wholesale purchase of this hat, CLICK HERE or call us at 1-888-847-4287. |
Close
|
Wool Military Beret with Lambskin Band |
---|
Made in Canada The Wool Military Beret with Lambskin Band is proudly made in North America by the same manufacturer who supplies berets for the American military (Green Berets) as well as for the Royal Air Force of Great Britain. Berets have been a part of the military uniform since the 19th century and are still seen on troops throughout the world today. There are two unique design elements on this beret: * The semi-circle cardboard insert. This enables the wearer to create a sharp angle on the beret, as well as the spot to display your badge, emblem, or pin. * The leather binding (edge) encases a nylon web band that ends in a bow, this is used to adjust the size of the beret. Approx. 9 1/2" Diameter, Flat 3" Half-Moon Insert - Front Made of: 100% Wool Made in Canada Seamless Wool Beret Semi-circle Insert at Front Lambskin Leather Binding Adjustable Nylon Web Band Unlined Sizes: 6 3/4 (54cm, S) - 8 (64cm, XXXL); fits true to size. |
Close
|
Braided Leather Chin Strap |
---|
The Village Hat Shop presents the Braided Leather Chin Strap, the best method to ensure against the loss of your hat in wind or brush. Chin cord/straps, known in cattle country as stampede strings, provide security and assurance your hat will stay put. This chin cord/strap is practical, and the genuine leather looks fantastic, and built to last. Anyone who wants to keep their hat from blowing away will find it useful. Featuring a sliding wood bead that joins together two, four plait braids of leather, adjustable for total comfort. The Braided Leather Chin Strap works with a variety of hats, it's so easy to install, you'll want one for every hat you own. For best results, please follow all instructions for use (below). Instructions for Use: * Hold the cotter pins tightly together and push them through the stitching where the sweatband meets the body. * Pull the pins completely through the base of the sweatband until the braid is firmly against the sweatband. * Spread and bend the pins outward, as close to horizontal as possible. * Once bent, the pins provide a secure attachment of the chin strap. Approx. 22" Length (Excluding End Pins) Made of: 100% Leather Sliding Wood Bead Four Plait Braided Leather on Each Cord/Strap Metal D-Ring Attachments Metal Cotter Pins Size: One Size Fits Most |
Close
|
Maverick Palm Straw Western Hat |
---|
Made in Mexico The Maverick Palm Straw Western Hat by Charlie 1 Horse is crafted of hearty palm leaf straw in a wide-brimmed design ideal for providing sun coverage. Its cattleman crown boasts three ventilation eyelets per side to ensure the hat breathes comfortably while a grosgrain ribbon hat band and branded horseshoe logo adorn the crown. Palm leaf straw is famous for its durability and the Maverick Palm Leaf Straw Western is able to stand up to whatever you throw its way. Approx. 3 3/4" Cattleman Crown - Front 4 1/4" Cattleman Crown - Back 4 1/2" Shovel Brim Made of: 100% Palm Straw Made in Mexico Grosgrain Ribbon Hat Band 3 Ventilation Eyelets Per Side Charlie 1 Horse Branded Logo DRI-LEX® Absorbent Sweatband Charlie 1 Horse Crown Tip Unlined Size(s): 6 7/8 (S) - 7 3/4 (XXL); fits true to size. |
Close
|
Bandito Palm Leaf Straw Gus Hat |
---|
Made in Mexico A classic Gus design with added personality, the Bandito Palm Leaf Straw Gus Hat by Charlie 1 Horse gives the classic western look a stylish new twist. Crafted in Mexico of genuine Mexican palm leaf straw, the Bandito is sturdy yet flexible and boasts a slight sheen. Its Gus-style crown is highest at the back and short at the front; three ventilation eyelets are placed on each side of the crown for added breathability. A handsome cross stitched faux leather hat band and grosgrain ribbon bound brim give the hat a distinctive look. Approx. 5 1/4" Gus Crown - Back 3" Gus Crown - Front 4 7/8" - 5 1/8" Upturned Brim Made of: 100% Mexican Palm Leaf Straw Made in Mexico High/Low Gus Crown 3 Ventilation Eyelets Per Side - Crown Cross Stitched Faux Leather Hat Band w/ Side Tails Branded Charlie 1 Horse Horseshoe Logo Grosgrain Ribbon Bound Upturned Brim Faux Leather Sweatband Charlie 1 Horse Crown Tip Unlined Sizes: Fitted - Sizes 6 3/4 (XS) - 7 5/8 (XL); fits true to size. |
Close
|
Cotton Twill Bucket Hat |
---|
Village Hat Shop's Cotton Twill Bucket Hat features a 100% cotton body with a narrow, stitched brim. The cotton material adds comfort and durability while brim helps to shield your face and eyes from the sun. Simple but effective, this is a basic for any wardrobe. Approx. 3" Square Crown 2" Downturned Brim Made of: 100% Cotton Packable/Crushable Stitched Brim Cotton Twill Sweatband Inseam Taping Unlined Size(s): S, M, L, XL and XXL; fits true to size. For Wholesale/B2B purchase of this style, CLICK HERE or call us at 1-888-847-4287. |
Close
|
British Wolseley Pith Helmet |
---|
Please Note: Due to the handmade nature of Pith Helmets, be advised there might be minor imperfections in the construction of the hat. These imperfections do not hinder the look or wear of the helmet. Made in Vietnam This pith helmet style is reminiscent of a classic fireman's helmet. The helmet was named after M/Gen. Sir Garnet Wolseley, who developed the original pattern. We have seen many variations on the name...Wolsey, Wolesley, etc., but the correct spelling is Wolseley. Through the years there have been many minor variations to this style. Please Note: This pith helmet can be immersed in water, whereby the wearer stays cool during use on hot summer days. Please submerge the outside of the helmet carefully, without allowing water to spill into the interior of the helmet. S/M Helmet - Approx. 4 1/2" Crown 3" Brim - Front 2 1/8" Brim - Sides 3 1/8" Brim - Back L/XL Helmet - Approx. 4 1/2" Crown 3 1/4" Brim - Front 2 1/4" Brim - Sides 3 1/4" Brim - Back Made of: 100% Genuine Pith Handmade Cotton Twill Exterior Composite Leather Decorative Strap Size-Adjustable Inner Harness Contrast Cotton Lining (Green or Brown) Lightweight Dunk in Water to Stay Cool Size: S/M fits up to size 7 1/4; L/XL fits up to size 7 5/8; adjusts via a hook and loop ending to the interior sweatband. For Bulk/Wholesale purchase of this style, CLICK HERE or call us at 1-888-847-4287. |
Close
|
High Desert Palm Leaf Straw Plantation Hat |
---|
Made in Mexico Keep the sun off with the stylish High Desert Palm Leaf Straw Plantation Hat by Charlie 1 Horse! Its genuine palm leaf straw construction makes this hat sturdy and durable yet supple and flexible. Its wide brim provides plenty of coverage for your face, ears and neck while its handsome conch leather hat band gives it a distinctly western look. Approx. 3 3/4" Telescope Crown - Front 4" Telescope Crown - Back 4 1/4" Pencil Curl Brim Made of: 100% Mexican Palm Leaf Straw Made in Mexico Conch Leather Hat Band Branded Charlie 1 Horse Horseshoe Logo DRI-LEX® Absorbent Sweatband Charlie 1 Horse Crown Point Unlined Sizes: S, M, L and XL; fits true to size. |
Close
|
Jersey Knit Hat Sizer Pack - Black |
---|
Please Note: 1 pack contains 2 individual hat sizers. Find yourself in-between hat sizes? Want your hat to fit your head a big snugger? Prefer the added comfort of a cotton or terry cloth sweatband? All can be achieved with The Village Hat Shop's own Jersey Knit Hat Sizer Packs that help size your hat down by 1/2 a size. Feels as soft as your favorite cotton t-shirt and available in either black or white for your convenience. For best results, please follow all instructions for use (below). Approx. 10" Length 1 1/4" Width Made of: 100% Jersey Knit 2-Pack of Jersey Knit Sizers Instructions Size: One Pack (2 sizers per pack). Instructions: * Peel off the backing from the sizer. * Stick to the front section of the hat's sweatband or whatever area the hat has a loose fit (front, back or sides). You can also place the sizer behind the sweatband, directly onto the hat, or onto the backside of the sweatband. * Discard the used strip when soiled and replace. For Bulk/Wholesale purchase of this item, CLICK HERE or call us at 1-888-847-4287. |
Close
|
Wool Fashion Beret |
---|
Made of 100% wool, Village Hat Shop brings you the timeless Wool Fashion Beret in a wide assortment of colors. Sleek and simple, this seamless wool beret is topped with a small tonal tassel. Wear it tilted to either side of your head, centered or towards the back - the Wool Fashion Beret adds a touch of effortless French flair to your look! Approx. 11" Diameter Made of: 100% Wool Center Top Tassel Unlined Packable / Crushable Soft Size: One Size Fits Most - Fits up to size 7 1/8 (M) comfortably. For Bulk/Wholesale purchase of this hat, CLICK HERE or call us at 1-888-847-4287. |
Close
|
Wool Military Beret |
---|
By popular demand, we now have an all-wool, military style beret that is less expensive than the official USA Army style. The quality remains top notch - this beret is cotton lined, has a grosgrain-bound edge, two eyelets on the right side, and a half-moon insert at its front. Approx. 10 1/2" Diameter Made of: 100% Wool Seamless Wool Beret Half-moon Insert at Front Grosgrain Bound Edge Adjustable Straps Cotton Lined Sizes: 55cm (6 7/8, S) - 62cm (7 3/4, XXL) For Wholesale/B2B purchase of this style, CLICK HERE or call us at 1-888-847-4287. |
Close
|
Hard Plastic Western Hat Can Carrier - Black |
---|
Please Note: This item may have gold OR silver tone clasps (gold tone is featured in the photos above). This feature is assorted and hardware color cannot be selected. Made in the USA Traveling with hats can be a burden but the Hard Plastic Western Hat Can/Carrier helps to solve this problem. Your hat sits upon the inner hat rest that can be adjusted to fit any hat size via the wing-nuts on the bottom of the case. The hat then floats on the rest and the brim is safe from damage. Approx. 9" Height 17" Width 16" Depth Made of: Hard Plastic Made in the USA Stiff Plastic - Protect & Store Your Hats! Handle - Lays Flat When Not in Use (2) Metal Clasps - Secure Lid in Place Crown Insert - Adjusts via Wingnuts Under Carrier Fits Hats up to 5" Crown Fits Hats up to 4" Brim Size: One Size - Fits hats up to 5" Crown and 4" Brim. |
Close
|
Mamacita Palm Straw Gambler Hat |
---|
Made in Mexico A new and stunning headwear offering from Charlie 1 Horse, the Mamacita Palm Straw Gambler Hat. A tight and attractive braided palm straw body is accented with a seed bead hat band. This hat band is a true celebration of color and is further accented with a concho accent with faux turquoise cabochon and leather embossed feather. Every detail of this hat showcases the expert skill and top quality at Charlie 1 Horse. Approx. 3 3/4" Telescope Crown 4" Flat Brim Made of: 100% Palm Straw Made in Mexico Flexible Body Seed Bead Hat Band Concho Accent - Faux Turquoise Cabochon Leather Embossed Feather Detail Charlie 1 Horse Branded Horseshoe Logo Braided Binding on Brim DRI-LEX® Sweatband Unlined Size(s): S, M and L; fits true to size. |
Close
|
Traveler Wool Felt Crossover Hat |
---|
Made in Mexico Style and class combine for the Traveler Wool Felt Crossover Hat from Charlie 1 Horse. This wonderful hat features western-inspired styles in a druable wool felt body and the iconic Charlie 1 Horse branding. The narrow leather hat band wrapping around the crown has tassels with a bead adjustor, and showcases silver metallic conchos. Approx. 4" Teardrop Crown - Front 3 1/2" Teardrop Crown - Back 3 3/4" Downturned Brim Made of: 100% Wool Felt Made in Mexico Flexible Body Fire-Branded 'C' Logo - Front Leather Hat Band with Tassels Silver Metallic Conchos Raw Edge Brim DRI-LEX® Absorbent Sweatband Unlined Sizes: S, M, and L; fits true to size. |
Close
|
Felt Hat Brush |
---|
Information from the book Stetson Hats: "Whether vintage or modern, dust your hat daily with a soft-bristled brush. Stiff bristled brushes will tear the felt. Western stores frequently sell hatter's brushes for this dusting job." For the best maintenance and care of your hat(s), use a dark-colored brush for dark hats and a light colored brush for light hats. For best results, please follow all instructions for use (below) or watch the video here. Approx. 10 5/8" Length 3/4" - 1 1/4" Width Made of: 100% Maple Wood 100% Horse Hair Bristles Size: One Size Instructions for Use: * Brush counter-clockwise direction on the top of your hat. * Brush clockwise direction under the brim. * Brush daily. For Bulk/Wholesale purchase of this hat brush, CLICK HERE or call us at 1-888-847-4287. |
Close
|
Wooden Hat Jack Stretcher |
---|
The Village Hat Shop Wooden Hat Jack Stretcher is made from genuine Baltic pine wood and will be your new favorite hat tool. This product protects your hat investment by maintaining the hat's size and preventing shrinkage. The Hat Jack also absorbs moisture and helps to preserve the sweatband of your hat. It is great for all caps and hats. Never wear a pinching hat again. Approx. 6 7/8" Length, Unstretched Made of: 100% Genuine Baltic Pine Wood (Excluding Center Arm) Manufacturer Instructions for Use: To Store Hat: * Lay the Wooden Hat Jack Stretcher on flat surface, labels up (wood forms are tapered). * Twist center handle to approximate hat size. * Place in hat, labels up, center handle parallel to crease in hat crown. * Twist center handle to achieve a snug fit - hat is ready for storage. ***Always rest hat on its crown, brim up.*** To Increase Hat Size: * Repeat above steps. * Boil clean water using a teapot or pan with lid slightly ajar, then reduce heat to produce a steady flow of steam. * Holding Wooden Hat Jack Stretcher handle, direct steam evenly to outside of hat band area. * Twist handle to stretch hat to desired size while applying steam. ***Do NOT overstretch any hat - 2 hat sizes maximum (2 CM maximum): Example: 7 (56 cm) to 7 1/4 (58 cm)*** * Allow hat to cool and dry 20-30 minutes before removing Hat Jack. * Repeat if hat shrinks until hat maintains desired size and fit. Size(s): S, M, and L; please see chart below. Stretcher Size Hat Size Stretch Range Small 54 CM 54 CM to 58 CM Medium 57 CM 57 CM to 60 CM Large 60 CM 60 CM to 65 CM |
Close
|
Tribal Shantung Straw Fedora Hat |
---|
Made in Mexico The Tribal Shantung Straw Fedora Hat from Charlie 1 Horse is full of color and is a celebration of well-made straw hats. Made in Mexico of 100% shantung straw, this fedora's layered hat band steals the show. Double layered with a faux leather bottom layer and a satin tribal patterned scarf on top adorned with metal accent pieces and a leather tooled feather. The beautiful craftsmanship is also demonstrated in the stiff body and tightly woven straw. Approx. 4" Teardrop Crown 3 3/4" Downturned Brim Made of: 100% Shantung Straw Made in Mexico Firm/Stiff Body Vented Crown Double Layered Hat Band - Faux Leather and Satin Tribal Patterned Scarf Metal Concho Accents Tooled Leather Feather DRI-LEX® Absorbent Sweatband Unlined Size(s): S, M, L and XL - Fits true to size |
Close
|
Midnight Toker Shantung Straw Wide Brim Fedora Hat |
---|
Made in Mexico Charlie 1 Horse brings us a hat with character this spring/summer season, the Midnight Toker Shantung Straw Wide Brim Fedora Hat! Made in Mexico of 100% shantung straw, the Midnight Toker is adorned with a turquoise and ivory beaded hat band, suede tassels and an embroidered feather on the teardrop crown. Confidently made by Charlie 1 Horse for the bold at heart. Approx. 4" Teardrop Crown 3 3/4" Downturned Brim Made of: 100% Shantung Straw Made in Mexico Firm/Stiff Body Charlie 1 Horse Branding Turquoise and Ivory Beaded Hat Band Suede Tassels Embroidered Feather Accent - Crown DRI-LEX® Absorbent Sweatband Unlined Size(s): S, M, L and XL; fits true to size |
Close
|
Cotton Twill 3-Pleat Puggaree Hat Band - Khaki |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a multitude of great colors, the 3-Pleat Puggaree Cotton Twill Hat Band by Village Hat Shop will give a fresh new look to your favorite hat. For best results, please follow all instructions for use (below). Approx. 28" Total Length, End to End 2" Width Made of: 100% Cotton Twill 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Coyote Palm Straw Gus Western Hat |
---|
Please Note: This style features an aged/burned/stained finish. This is the intended look of the hat and does NOT constitute damage. Please enlarge each thumbnail image for a close-up view of the aged and stained finish. Go big or go home! That's what we say when it comes to the Coyote Palm Straw Gus Western Hat from Charlie 1 Horse. This larger-than-life hat features a burned palm straw body that's comfortable thanks to the elasticized sweatband. The stitched hat band is a colorful addition, putting the "fun" in this functional hat! Approx. 2 1/2" Gus Crown - Front 5 1/2" Gus Crown - Back 7 1/2" Wired Shapeable Brim Made of: 100% Palm Straw Sewn Braid Straw Body Charlie 1 Horse Branding Burned Finish Stitched Hat Band with Leather Strap Elasticized Sweatband Unlined Size: One Size Fits Most - Fits up to size 7 1/8 (M) comfortably. |
Close
|
Highway Wide Brim Wool Felt Fedora Hat |
---|
Please Note: Sizing for this style runs small. Call us at 1-888-847-4287 for help with sizing. Made in Mexico Charlie 1 Horse, coming in with the minimalistic, the classic, the oh-so-wearable Highway Wide Brim Wool Felt Fedora Hat! Made in Mexico of 100% wool, this hat has a semi-stiff finish and an understated tonal grosgrain ribbon hat band. Turn it over and we have a tonal DRI-LEX® sweatband that blends effortlessly into the unlined crown interior. Approx. 4 1/4" Teardrop Crown 3 3/4" Floppy Brim Made of: 100% Wool Felt Made in Mexico Flexible Body Charlie 1 Horse Branding Raw Edge Brim Tonal Grosgrain Ribbon Hat Band DRI-LEX® Absorbent Sweatband Charlie 1 Horse Logo Crown Stamp Unlined Size(s): S, M and L - Runs small, please see disclaimer at top. |
Close
|
Chisos Shantung Straw Fedora Hat |
---|
Made in Mexico The Chisos Shantung Straw Fedora Hat from Charlie 1 Horse is a celebration of color and quality straw hats. Made in Mexico of 100% shantung straw, this fedora's satin scarf hat band steals the show. Featuring a multi-colored paisley pattern, the scarf has been secured iwth a leather cross strap. Still feel like something's missing? A metal concho accent is included with this purchase if you just can't get enough of this bold and eye-catching look. Approx. 4" Teardrop Crown 3 3/4" Downturned Brim Made of: 100% Shantung Straw Made in Mexico Firm/Stiff Body Vented Crown Charlie 1 Horse Branding Satin Paisley Scarf Hat Band Leather Cross Strap Metal Concho Accent - Included DRI-LEX® Absorbent Sweatband Unlined Size(s): S, M and L; fits true to size |
Close
|
Poly Mesh Mustache Hat Sizer Pack - Black |
---|
Please Note: 1 pack contains 2 individual mustache hat sizers. Find yourself in-between hat sizes? Want your hat to fit your head a big snugger? Prefer the added comfort of a cushioned sweatband? All can be achieved with the Village Hat Shop's own Poly Mesh Hat Sizer Pack that helps size your hat down by 1/2 a size. Feels as cushioned as a pillow and available in black for your convenience. For best results, please follow all instructions for use (below). Instructions: * Peel off the backing from the sizer. * Stick to the front section of the hat's sweatband or whatever area the hat has a loose fit (front, back or sides). You can also place the sizer behind the sweatband, directly onto the hat, or onto the backside of the sweatband. * Discard the used strip when soiled and replace. Approx. 8 1/2" Length 2" Height Made of: 100% Polyester 2-Pack of Mesh Hat Sizers Size(s): One Size Fits Most - 1 pack contains 2 individual hat sizers. For Bulk/Wholesale purchase of this item, CLICK HERE or call us at 1-888-847-4287. |
Close
|
Cotton Twill 3-Pleat Puggaree Hat Band - Black |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a multitude of great colors, the 3-Pleat Puggaree Cotton Twill Hat Band by Village Hat Shop will give a fresh new look to your favorite hat. Approx. 28" Total Length, End to End 2" Width Made of: 100% Cotton Twill 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Hard Plastic Single Hat Can Carrier |
---|
Please Note: The larger the hat size, the less space will remain for the brim. Hats larger than 7 3/8 (L) will have less brim space; these will still fit but the brim might need to be curled up a bit. You might consider the Western Hat Can for larger hat sizes and/or wider brims. Made in the USA If you travel and love to wear hats, this is the perfect companion for that beloved accessory. Traveling with hats can be a burden but the Hat Can/Carrier solves this problem. Your hat sits upon the inner hat rest that can be adjusted to fit any hat size via the wing-nuts on the bottom of the case. The hat then floats on the rest and the brim is safe from damage. This is a perfect house for your special hat. Approx. 10" Height 13" Width 11 1/4" Depth Made of: Hard Plastic Made in the USA Stiff Plastic - Protect & Store Your Hats! Handle - Lays Flat When Not in Use 2 Brass Buckles - Secure Lid in Place Crown Insert - Adjusts via Wingnuts Under Carrier Fits Hats up to 7" Crown Fits Hats up to 2 1/4" Brim Size: One Size - Fits hat up to 7" Crown and 2 1/4" Brim. |
USA: 1-888-VHS-HATS (1-888-847-4287)
INT'L: +1 619-906-4440 Se habla español
Shop for Hats at VillageHatShop.com | Privacy Policy | Website Accessibility | Site Map
Copyright © 1999-2020 Village Hat Shop: The #1 Source for Hats Online
*ALL SPECIAL OFFERS AND DISCOUNTS
Excludes wholesale/B2B, Certain Brand Restrictions, Special Orders or Where Otherwise Noted.
CONTACT USWe are happy to help! |
1 (888) 847-4287Mon-Sun 8am-4:00pm |