Close
|
Women's Every Season Covered Pack |
---|
Summer, Winter, Autumn or Spring, whether skies are gray or blue, we've got you with the Women's Every Season Covered! The Chloe Wool Felt Cloche Hat will keep you warm yet stylish during the colder months, while when it pours you can pull out the Nylon Rain Bucket Hat. To round it all out, the Beach Side Toyo Straw Sun Hat is for relaxing in style at the beach or poolside. Chloe Wool Felt Cloche Hat by sur la tete Nylon Rain Bucket Hat by sur la tete Beach Side Toyo Straw Hat by sur la tete Style# 125511 Style# 186300 Style# 104201 Approx. Approx. Approx. 4" Crown 4" Square Crown 9" Tassel Length 2 1/8" Dimensional Brim 2" Stitched Brim Made of: Made of: Made of: 100% Wool Felt 100% Nylon Shell - 100% Acrylic Lining - 100% Polyester Satin Ribbon Hat Band Cotton Poplin Lining Fleece Lining Feather Accents Water Resistant Sewn Jaxon Logo Tab Grosgrain Ribbon Sweatband Packable/Crushable Unlined Size(s): One Size Fits Most - Fits up to size 7 1/8 (M) comfortably. Size(s): One Size Fits Most - Fits up to size 7 1/4 (L) comfortably. Size(s): One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 3/8 (L) comfortably. |
Close
|
Wool Fashion Beret |
---|
Made of 100% wool, Village Hat Shop brings you the timeless Wool Fashion Beret in a wide assortment of colors. Sleek and simple, this seamless wool beret is topped with a small tonal tassel. Wear it tilted to either side of your head, centered or towards the back - the Wool Fashion Beret adds a touch of effortless French flair to your look! Approx. 11" Diameter Made of: 100% Wool Center Top Tassel Unlined Packable / Crushable Soft Size: One Size Fits Most - Fits up to size 7 1/8 (M) comfortably. For Bulk/Wholesale purchase of this hat, CLICK HERE or call us at 1-888-847-4287. |
Close
|
Braided Leather Chin Strap |
---|
The Village Hat Shop presents the Braided Leather Chin Strap, the best method to ensure against the loss of your hat in wind or brush. Chin cord/straps, known in cattle country as stampede strings, provide security and assurance your hat will stay put. This chin cord/strap is practical, and the genuine leather looks fantastic, and built to last. Anyone who wants to keep their hat from blowing away will find it useful. Featuring a sliding wood bead that joins together two, four plait braids of leather, adjustable for total comfort. The Braided Leather Chin Strap works with a variety of hats, it's so easy to install, you'll want one for every hat you own. For best results, please follow all instructions for use (below). Instructions for Use: * Hold the cotter pins tightly together and push them through the stitching where the sweatband meets the body. * Pull the pins completely through the base of the sweatband until the braid is firmly against the sweatband. * Spread and bend the pins outward, as close to horizontal as possible. * Once bent, the pins provide a secure attachment of the chin strap. Approx. 22" Length (Excluding End Pins) Made of: 100% Leather Sliding Wood Bead Four Plait Braided Leather on Each Cord/Strap Metal D-Ring Attachments Metal Cotter Pins Size: One Size Fits Most |
Close
|
Break Away Chin Cord |
---|
Please Note: This chin cord works best with leather, suede, or faux leather sweatbands. For a hat to be compatible, wire chin cord hooks must fit inside the crown. The Break Away Chin Cord by Akubra is perfect for those with an adventurous lifestyle. Cleverly designed to break away from your hat if snagged, this chin cord is perfect for horseback riding, rock climbing, hiking and many other outdoor activities. Also ensures against the loss of your hat in high winds. Approx. 17" Length Made of: 100% Nylon Designed in Australia Plastic Releases - Pulls Apart with Excessive Tension Adjustable Metal Toggle Wire Chin Cord Hooks Fitting Instructions Included Size(s): One Size Fits Most - works best with certain hats. Please see disclaimer at top of description. |
Close
|
Felt Hat Brush |
---|
Information from the book Stetson Hats: "Whether vintage or modern, dust your hat daily with a soft-bristled brush. Stiff bristled brushes will tear the felt. Western stores frequently sell hatter's brushes for this dusting job." For the best maintenance and care of your hat(s), use a dark-colored brush for dark hats and a light colored brush for light hats. For best results, please follow all instructions for use (below) or watch the video here. Approx. 10 5/8" Length 3/4" - 1 1/4" Width Made of: 100% Maple Wood 100% Horse Hair Bristles Size: One Size Instructions for Use: * Brush counter-clockwise direction on the top of your hat. * Brush clockwise direction under the brim. * Brush daily. For Bulk/Wholesale purchase of this hat brush, CLICK HERE or call us at 1-888-847-4287. |
Close
|
Blackout Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. Locally based out of San Diego, CA, Hemlock Hat Co brings you their specialty line of functional, outdoor hats that celebrate self-expression. Trimmed and lined with a wide array of fun, original prints, their lifeguard styles allow you to express your personal style while enjoying everything the outdoors has to offer. The new Blackout Straw Lifeguard Hat features their classic straw lifeguard hat body with a black-colored trim, lining and Hemlock sewn patch. An adjustable chincord adds protection during windy conditions; a stretchy and absorbent sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 3/4" Cattleman Crown 4 5/8" Downturned Brim Made of: Body - 100% Handwoven Seagrass and Rush Straw Lining - 100% Polyester Designed in California, USA Sewn Hemlock Patch - Front Blackout Print Fabric Trimmed Brim UPF 50+ Blackout Print Fabric Underbrim Braided Rope Chin Cord with Wooden Adjustor Elastic Sweatband - Stretches to Fit Unlined Crown Size(s): One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 1/4 (L) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
Close
|
Mariner Rush Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. UPF 50+ Sun Protection Locally based out of San Diego, CA, Hemlock Hat Co brings you their specialty line of functional, outdoor hats that celebrate self-expression. Trimmed and lined with a wide array of fun, original prints, their lifeguard styles allow you to express your personal style while enjoying everything the outdoors has to offer. The new Mariner Rush Straw Lifeguard Hat features their classic straw lifeguard hat body with underwater-themed binding on brim, underbrim and Hemlock sewn patch. An adjustable chin cord adds protection during windy conditions; a stretchy and absorbent sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 3/4" Cattleman Crown 4 1/2" Downturned Brim Made of: Body - 100% Handwoven Rush Straw Lining - 100% Polyester UPF 50+ Sun Protection - Underwater Print Fabric Underbrim Designed in California, USA Sewn Hemlock Patch - Front Underwater Print Fabric Binding On Brim Braided Rope Chin Cord with Wooden Adjustor Elastic Sweatband - Stretches to Fit Unlined Crown Size(s): One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 1/4 (L) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
Close
|
Poly Mesh Mustache Hat Sizer Pack - Black |
---|
Please Note: 1 pack contains 2 individual mustache hat sizers. Find yourself in-between hat sizes? Want your hat to fit your head a big snugger? Prefer the added comfort of a cushioned sweatband? All can be achieved with the Village Hat Shop's own Poly Mesh Hat Sizer Pack that helps size your hat down by 1/2 a size. Feels as cushioned as a pillow and available in black for your convenience. For best results, please follow all instructions for use (below). Instructions: * Peel off the backing from the sizer. * Stick to the front section of the hat's sweatband or whatever area the hat has a loose fit (front, back or sides). You can also place the sizer behind the sweatband, directly onto the hat, or onto the backside of the sweatband. * Discard the used strip when soiled and replace. Approx. 8 1/2" Length 2" Height Made of: 100% Polyester 2-Pack of Mesh Hat Sizers Size(s): One Size Fits Most - 1 pack contains 2 individual hat sizers. For Bulk/Wholesale purchase of this item, CLICK HERE or call us at 1-888-847-4287. |
Close
|
Printed Cotton Bandana |
---|
FINAL SALE The bandana has been worn by almost everyone at some point in time. This simple piece of fabric can change a person's look in 10 seconds! This 21 1/2" x 21 1/2" square is great as a handkerchief, bandana, face mask, or scarf. Approx. 21 1/2" L x 21 1/2" W Made of: 100% Cotton Patterned Bandana Square Size: One Size Fits Most. FINAL SALE |
Close
|
Golf Ball Hat-Tac |
---|
FINAL SALE Made in the USA Never again worry about your hats becoming misshapen, sagging, or losing their curve, thanks to the Golf Ball Hat-Tac. This revolutionary invention sticks to any surface thanks to the 3M foam adhesive backing, and the fixed curve platform allows hats to comfortably rest in an upright position. With this patented and trademarked design, your ball cap, fedora, or any other piece of headwear will never lose its curve. This is the perfect place to hang your hat! Approx. 45.5 mm High 97 mm Wide 50 mm Deep Made in the USA 3M Foam Adhesive Backing Fixed Curve Platform Golf Ball and Putting Green Print Sturdy and Reliable Works for Hats of All Sizes Manufacturer Instructions for How to Apply: * Prep surface: Take a soft wash cloth with Isopropyl or similar alcohol cleaner to create a nice clean surface for the HAT-TAC™ to stick onto. Our recommendation is to find a smooth clean surface with little texture. * After prepping the surface: Grab the tab sticking out and peel away the red backing with ease. HAT-TAC™ attaches to the wall using a foam medium hold double sided adhesive. * Position: Align your HAT-TAC™ a few centimeters off the wall, making sure to the top so is perfectly level. * Last step: Push softly, just enough to hold the HAT-TAC™ in place on the surface. Take a few steps back to make sure it is exactly where you want it positioned. If the positioning is perfect, push and hold the back side of the HAT-TAC™ to the wall firmly for 30 seconds then wait 30 minutes before hanging a hat. Manufacturer Instructions for How to Remove: * Step One: Firmly grab each side of the HAT-TAC™ with both hands. * Step Two: Slowly wiggle the HAT-TAC™ up and down to separate the adhesive back from the wall. Be careful during this step as removing too fast or incorrectly could peel paint. FINAL SALE |
Close
|
Genuine Government Issue Wool Watch Cap |
---|
Made in the USA This watch cap (also known as a beanie) is NOT the cheap acrylic cap that you find around. Instead, this is watch cap is made to the specifications of the USA Department of Defense. The design, the material, the knitting quality and stitches per inch, the colorfastness, the finished weight, are all as per the USA military requirements. Approx. 9" Height - Flat 6" Width - Flat 3" Cuff Made of: 100% Wool Made in the USA Double-Wall Construction Cuff - Wear Folded Up or Down Size: One Size Fits Most - Stretches to fit up to size 7 3/4 (XXL). For Bulk/Wholesale purchase of this hat, CLICK HERE or call us at 1-888-847-4287. |
Close
|
Capri Wheat Straw Visor |
---|
Maybe its a messy bun or a low ponytail, the Capri Wheat Straw Visor by Hemlock Hat Co will pair with any do you wear on the go. Made of 100% wheat straw that has been handwoven, making each piece completely unique. Features a soft and breathable linen sweatband with an elastic strap closure at the back. Approx. 2" Open Crown 4 1/2" Bill/Visor Made of: 100% Wheat Straw Handwoven Body Increased UV Resistance Metal Side Pin Linen Sweatband Elastic Strap - Back Unlined Size(s): One Size Fits Most - Fits up to size 7 1/4(L) comfortably. |
Close
|
Cotton Twill 3-Pleat Puggaree Hat Band - Navy Blue |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a multitude of great colors, the 3-Pleat Puggaree Cotton Twill Hat Band by Village Hat Shop will give a fresh new look to your favorite hat. For best results, please follow all instructions for use (below). Approx. 28" Total Length, End to End 2" Width Made of: 100% Cotton Twill 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Barbados Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. UPF 50+ Sun Protection Locally based out of San Diego, CA, Hemlock Hat Co brings you their specialty line of functional, outdoor hats that celebrate self-expression. Trimmed and lined with a wide array of fun, original prints, their lifeguard styles allow you to express your personal style while enjoying everything the outdoors has to offer. The new Barbados Straw Lifeguard Hat features their classic straw lifeguard hat body with a flower and palm-themed binding on brim, lining and Hemlock sewn patch. An adjustable chin cord adds protection during windy conditions; a stretchy and absorbent sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 3/4" Cattleman Crown 4 1/2" Downturned Brim Made of: Body - 100% Handwoven Straw Lining - 100% Polyester UPF 50+ Sun Protection - Flower and Palm-Themed Fabric Underbrim Designed in California, USA Sewn Hemlock Patch - Front Print Fabric Binding On Brim Braided Rope Chin Cord with Wooden Adjustor Elastic Sweatband - Stretches to Fit Unlined Crown Size(s): One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 1/4 (L) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
Close
|
Hard Plastic Western Hat Can Carrier - Black |
---|
Please Note: This item may have gold OR silver tone clasps (gold tone is featured in the photos above). This feature is assorted and hardware color cannot be selected. Made in the USA Traveling with hats can be a burden but the Hard Plastic Western Hat Can/Carrier helps to solve this problem. Your hat sits upon the inner hat rest that can be adjusted to fit any hat size via the wing-nuts on the bottom of the case. The hat then floats on the rest and the brim is safe from damage. Approx. 9" Height 17" Width 16" Depth Made of: Hard Plastic Made in the USA Stiff Plastic - Protect & Store Your Hats! Handle - Lays Flat When Not in Use (2) Metal Clasps - Secure Lid in Place Crown Insert - Adjusts via Wingnuts Under Carrier Fits Hats up to 5" Crown Fits Hats up to 4" Brim Size: One Size - Fits hats up to 5" Crown and 4" Brim. |
Close
|
Solid Cotton Bandana |
---|
FINAL SALE The bandana has been worn by almost everyone at some point in time. This simple piece of fabric can change a person's look in 10 seconds! This 21 1/2" x 21 1/2" square is great as a handkerchief, bandana, face mask, or scarf. Approx. 21 1/2" L x 21 1/2" W Made of: 100% Cotton Solid Bandana Square Size: One Size Fits Most FINAL SALE |
Close
|
Skipper Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. UPF 50+ Sun Protection Locally based out of San Diego, CA, Hemlock Hat Co brings you their specialty line of functional, outdoor hats that celebrate self-expression. Trimmed and lined with a wide array of fun, original prints, their lifeguard styles allow you to express your personal style while enjoying everything the outdoors has to offer. The new Skipper Straw Lifeguard Hat features their classic straw lifeguard hat body with a sea life-themed binding on brim, lining and Hemlock sewn patch. An adjustable chin cord adds protection during windy conditions; a stretchy and absorbent sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 3/4" Cattleman Crown 4 3/8" Downturned Brim Made of: Body - 100% Handwoven Straw Lining - 100% Polyester UPF 50+ Sun Protection - Sea Life Print Fabric Underbrim Designed in California, USA Sewn Hemlock Patch - Front Sea Life Print Fabric Binding On Brim Braided Rope Chin Cord with Wooden Adjustor Elastic Sweatband - Stretches to Fit Unlined Crown Size(s): One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 1/4 (L) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
Close
|
Cotton Twill 3-Pleat Puggaree Hat Band - Khaki |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a multitude of great colors, the 3-Pleat Puggaree Cotton Twill Hat Band by Village Hat Shop will give a fresh new look to your favorite hat. For best results, please follow all instructions for use (below). Approx. 28" Total Length, End to End 2" Width Made of: 100% Cotton Twill 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Liberty Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. UPF 50+ Sun Protection Locally based out of San Diego, CA, Hemlock Hat Co brings you their specialty line of functional, outdoor hats that celebrate self-expression. Trimmed and lined with a wide array of fun, original prints, their lifeguard styles allow you to express your personal style while enjoying everything the outdoors has to offer. The new Liberty Straw Lifeguard Hat features their classic straw lifeguard hat body with a American flag-themed binding on brim, lining and Hemlock sewn patch. An adjustable chin cord adds protection during windy conditions; a stretchy and absorbent sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 3/4" Cattleman Crown 4 1/4" Downturned Brim Made of: Body - 100% Handwoven Straw Lining - 100% Polyester UPF 50+ Sun Protection - American Flag Print Fabric Underbrim Designed in California, USA Sewn Hemlock Patch - Front American Flag Print Fabric Binding On Brim Braided Rope Chin Cord with Wooden Adjustor Elastic Sweatband - Stretches to Fit Unlined Crown Size(s): One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 1/4 (L) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
Close
|
Casablanca Rush Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. UPF 50+ Sun Protection Locally based out of San Diego, CA, Hemlock Hat Co brings you their specialty line of functional, outdoor hats that celebrate self-expression. Trimmed and lined with a wide array of fun, original prints, their lifeguard styles allow you to express your personal style while enjoying everything the outdoors has to offer. The new Casablanca Rush Straw Lifeguard Hat features their classic straw lifeguard hat body with a Casablanca-themed binding on brim, lining and Hemlock sewn patch. An adjustable chin cord adds protection during windy conditions; a stretchy and absorbent sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 3/4" Cattleman Crown 4 1/2" Downturned Brim Made of: Body - 100% Handwoven Rush Straw Lining - 100% Polyester UPF 50+ Sun Protection - Tropical Print Fabric Underbrim Designed in California, USA Sewn Hemlock Patch - Front Tropical Print Fabric Binding On Brim Braided Rope Chin Cord with Wooden Adjustor Elastic Sweatband - Stretches to Fit Unlined Crown Size(s): One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 1/4 (L) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
Close
|
Squeeze Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. UPF 50+ Sun Protection Locally based out of San Diego, CA, Hemlock Hat Co brings you their specialty line of functional, outdoor hats that celebrate self-expression. Trimmed and lined with a wide array of fun, original prints, their lifeguard styles allow you to express your personal style while enjoying everything the outdoors has to offer. The new Squeeze Straw Lifeguard Hat features their classic straw lifeguard hat body with a citrus-themed trim, lining and Hemlock sewn patch. An adjustable chin cord adds protection during windy conditions; a stretchy and absorbent sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 3/4" Cattleman Crown 4 1/2" Downturned Brim Made of: Body - 100% Handwoven Seagrass and Rush Straw Lining - 100% Polyester Designed in California, USA Sewn Hemlock Patch - Front Citrus Print Fabric Trimmed Brim UPF 50+ Citrus Print Fabric Underbrim Braided Rope Chin Cord with Wooden Adjustor Rust Free Eyelets Elastic Sweatband - Stretches to Fit Unlined Crown Size(s): One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 1/4 (L) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
Close
|
Fez Tassel |
---|
With the great assortment of color tassels from the Village Hat Shop, you can now fancify your fez and switch up the fun with your favorite hat! Approx. 11" Long Made of: 100% Polyester |
Close
|
Siesta Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. UPF 50+ Sun Protection Locally based out of San Diego, CA, Hemlock Hat Co brings you their specialty line of functional, outdoor hats that celebrate self-expression. Trimmed and lined with a wide array of fun, original prints, their lifeguard styles allow you to express your personal style while enjoying everything the outdoors has to offer. The new Siesta Straw Lifeguard Hat features their classic straw lifeguard hat body with desert-themed binding on brim, underbrim and Hemlock sewn patch. An adjustable chin cord adds protection during windy conditions; a stretchy and absorbent sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 3/4" Cattleman Crown 4 1/2" Downturned Brim Made of: Body - 100% Handwoven Rush Straw Lining - 100% Polyester UPF 50+ Sun Protection - Desert Print Fabric Underbrim Designed in California, USA Sewn Hemlock Patch - Front Desert Print Fabric Binding On Brim Braided Rope Chin Cord with Wooden Adjustor Elastic Sweatband - Stretches to Fit Unlined Crown Size(s): One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 1/4 (L) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
Close
|
Midway Rush Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. UPF 50+ Sun Protection Locally based out of San Diego, CA, Hemlock Hat Co brings you their specialty line of functional, outdoor hats that celebrate self-expression. Trimmed and lined with a wide array of fun, original prints, their lifeguard styles allow you to express your personal style while enjoying everything the outdoors has to offer. The new Midway Rush Straw Lifeguard Hat features their classic straw lifeguard hat body with a flower and ocean-themed binding on brim, lining and Hemlock sewn patch. An adjustable chin cord adds protection during windy conditions; a stretchy and absorbent sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 3/4" Cattleman Crown 4 1/2" Downturned Brim Made of: Body - 100% Handwoven Rush Straw Lining - 100% Polyester UPF 50+ Sun Protection - Flower and Ocean Print Fabric Underbrim Designed in California, USA Sewn Hemlock Patch - Front Flower and Ocean Print Fabric Binding On Brim Braided Rope Chin Cord with Wooden Adjustor Elastic Sweatband - Stretches to Fit Unlined Crown Size(s): One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 1/4 (L) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
Close
|
Hat Cleaning Sponge |
---|
Made in the USA The Village Hat Shop Hat Cleaning Sponge is the serious hatter's tool of choice when cleaning surface spots on hats. Easily wipes away dirt, dust and grime. It is always used dry and cleans without chemicals. Like a pencil eraser, one carefully rubs the surface spot until it "balls up" and can be brushed away. Can be used on all shades of hats - for best results, use a separate sponge for each different color of hat. For best results, please follow all manufacturer instructions for use (below). Approx. 3 3/4" Length 2 1/8" Width Made of: 100% All Natural Latex Rubber Size: (1) Sponge Manufacturer Instructions for Use: * Always use dry. * Locate the soiled area and gently rub the sponge upon the spot. Any debris can be brushed into a trash receptacle. * When the surface of the sponge becomes clogged with dirt/grime, simply remove a layer by shaving with a razor blade or cutting off the section with a pair of scissors; or replace with a new sponge. * Do not wring out the sponge with water or clean it with any chemicals/cleansers. |
Close
|
Canopy Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. UPF 50+ Sun Protection Locally based out of San Diego, CA, Hemlock Hat Co brings you their specialty line of functional, outdoor hats that celebrate self-expression. Trimmed and lined with a wide array of fun, original prints, their lifeguard styles allow you to express your personal style while enjoying everything the outdoors has to offer. The new Canopy Straw Lifeguard Hat features their classic straw lifeguard hat body with a rainforest-themed trim, lining and Hemlock sewn patch. An adjustable chin cord adds protection during windy conditions; a stretchy and absorbent sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 3/4" Cattleman Crown 4 1/2" Downturned Brim Made of: Body - 100% Handwoven Seagrass and Rush Straw Lining - 100% Polyester Designed in California, USA Sewn Hemlock Patch - Front Rainforest Print Fabric Trimmed Brim UPF 50+ Rainforest Print Fabric Underbrim Braided Rope Chin Cord with Wooden Adjustor Rust Free Eyelets Elastic Sweatband - Stretches to Fit Unlined Crown Size(s): One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 1/4 (L) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
Close
|
Vagabond Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. UPF 50+ Sun Protection Locally based out of San Diego, CA, Hemlock Hat Co brings you their specialty line of functional, outdoor hats that celebrate self-expression. Trimmed and lined with a wide array of fun, original prints, their lifeguard styles allow you to express your personal style while enjoying everything the outdoors has to offer. The new Vagabond Straw Lifeguard Hat features their classic straw lifeguard hat body with a on-the-road living-themed binding on brim, lining and Hemlock sewn patch. An adjustable chin cord adds protection during windy conditions; a stretchy and absorbent sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 3/4" Cattleman Crown 4 1/2" Downturned Brim Made of: Body - 100% Handwoven Straw Lining - 100% Polyester UPF 50+ Sun Protection - On-The-Road Living Print Fabric Underbrim Designed in California, USA Sewn Hemlock Patch - Front On-The-Road Living Print Fabric Binding On Brim Braided Rope Chin Cord with Wooden Adjustor Elastic Sweatband - Stretches to Fit Unlined Crown Size(s): One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 1/4 (L) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
Close
|
Finished Leather Cleaning Kit |
---|
Give your beloved leather hats and accessories some much needed TLC with the new Finished Leather Cleaning Kit! Featuring Bickmore's famous Bick 4 leather conditioner and a soft suede and fleece cleaning cloth, this kit includes all you need to care for your leather goods. The Bick 4 conditioner is specially formulated to clean, condition, polish and protect. Don't let your leather hats lose their luster - get your Finished Leather Cleaning Kit today! For best results, follow all manufacturer instructions for use. Accessory Kit Includes: * (1) Bick 4 Leather Conditioner - Specially formulated to clean, condition, polish & protect. * (1) Suede & Fleece Soft Cleaning Cloth Specifications: * Bick 4 Bottle - 2 Fl Oz * Cloth - Approx. 4 1/2" Diameter |
USA: 1-888-VHS-HATS (1-888-847-4287)
INT'L: +1 619-906-4440 Se habla español
Shop for Hats at VillageHatShop.com | Privacy Policy | Website Accessibility | Site Map
Copyright © 1999-2020 Village Hat Shop: The #1 Source for Hats Online
*ALL SPECIAL OFFERS AND DISCOUNTS
Excludes wholesale/B2B, Certain Brand Restrictions, Special Orders or Where Otherwise Noted.
CONTACT USWe are happy to help! |
1 (888) 847-4287Mon-Sun 8am-4:00pm |