Close
|
3-Pleat Cotton Puggaree Hat Band |
---|
A new hat band can do wonders to freshen up any old hat, may we suggest the 3-Pleat Cotton Puggaree Hat Band by Capas Headwear. Featuring a multitude of great colors, this pug hat band is made of 100% cotton. Need to dress your hat up in something new? Look no further than the 3-Pleat Cotton Puggaree Hat Band - a fresh new look to your favorite hat! For best results, please follow all instructions for use (below). *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. Approx. 28" Total Length, End to End 1 7/8" Width Made of: 100% Cotton 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! |
Close
|
3-Pleat Satin Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a multitude of great colors, the 3-Pleat Satin Puggaree Hat Band will give a fresh new look to your favorite hat. For best results, please follow all instructions for use (below). Approx. 28" Total Length, End to End 2" Width Made of: 100% Satin 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Women's Every Season Covered Pack |
---|
Summer, Winter, Autumn or Spring, whether skies are gray or blue, we've got you with the Women's Every Season Covered! The Chloe Wool Felt Cloche Hat will keep you warm yet stylish during the colder months, while when it pours you can pull out the Nylon Rain Bucket Hat. To round it all out, the Beach Side Toyo Straw Sun Hat is for relaxing in style at the beach or poolside. Chloe Wool Felt Cloche Hat by sur la tete Nylon Rain Bucket Hat by sur la tete Beach Side Toyo Straw Hat by sur la tete Style# 125511 Style# 186300 Style# 104201 Approx. Approx. Approx. 4" Crown 4" Square Crown 9" Tassel Length 2 1/8" Dimensional Brim 2" Stitched Brim Made of: Made of: Made of: 100% Wool Felt 100% Nylon Shell - 100% Acrylic Lining - 100% Polyester Satin Ribbon Hat Band Cotton Poplin Lining Fleece Lining Feather Accents Water Resistant Sewn Jaxon Logo Tab Grosgrain Ribbon Sweatband Packable/Crushable Unlined Size(s): One Size Fits Most - Fits up to size 7 1/8 (M) comfortably. Size(s): One Size Fits Most - Fits up to size 7 1/4 (L) comfortably. Size(s): One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 3/8 (L) comfortably. |
Close
|
Paisley 3-Pleat Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a classic paisley print in varying colors, the Paisley 3-Pleat Puggaree Hat Band by Capas Headwear will give a colorful new twist to your favorite hat. For best results, please follow all instructions for use (below). Approx. 29" Total Length, End to End 1 7/8" Width Made of: 100% Polyester 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Braided Leather Chin Strap |
---|
The Village Hat Shop presents the Braided Leather Chin Strap, the best method to ensure against the loss of your hat in wind or brush. Chin cord/straps, known in cattle country as stampede strings, provide security and assurance your hat will stay put. This chin cord/strap is practical, and the genuine leather looks fantastic, and built to last. Anyone who wants to keep their hat from blowing away will find it useful. Featuring a sliding wood bead that joins together two, four plait braids of leather, adjustable for total comfort. The Braided Leather Chin Strap works with a variety of hats, it's so easy to install, you'll want one for every hat you own. For best results, please follow all instructions for use (below). Instructions for Use: * Hold the cotter pins tightly together and push them through the stitching where the sweatband meets the body. * Pull the pins completely through the base of the sweatband until the braid is firmly against the sweatband. * Spread and bend the pins outward, as close to horizontal as possible. * Once bent, the pins provide a secure attachment of the chin strap. Approx. 22" Length (Excluding End Pins) Made of: 100% Leather Sliding Wood Bead Four Plait Braided Leather on Each Cord/Strap Metal D-Ring Attachments Metal Cotter Pins Size: One Size Fits Most |
Close
|
Wool Fashion Beret |
---|
Made of 100% wool, Village Hat Shop brings you the timeless Wool Fashion Beret in a wide assortment of colors. Sleek and simple, this seamless wool beret is topped with a small tonal tassel. Wear it tilted to either side of your head, centered or towards the back - the Wool Fashion Beret adds a touch of effortless French flair to your look! Approx. 11" Diameter Made of: 100% Wool Center Top Tassel Unlined Packable / Crushable Soft Size: One Size Fits Most - Fits up to size 7 1/8 (M) comfortably. For Bulk/Wholesale purchase of this hat, CLICK HERE or call us at 1-888-847-4287. |
Close
|
Mariner Rush Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. UPF 50+ Sun Protection Locally based out of San Diego, CA, Hemlock Hat Co brings you their specialty line of functional, outdoor hats that celebrate self-expression. Trimmed and lined with a wide array of fun, original prints, their lifeguard styles allow you to express your personal style while enjoying everything the outdoors has to offer. The new Mariner Rush Straw Lifeguard Hat features their classic straw lifeguard hat body with underwater-themed binding on brim, underbrim and Hemlock sewn patch. An adjustable chin cord adds protection during windy conditions; a stretchy and absorbent sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 3/4" Cattleman Crown 4 1/2" Downturned Brim Made of: Body - 100% Handwoven Rush Straw Lining - 100% Polyester UPF 50+ Sun Protection - Underwater Print Fabric Underbrim Designed in California, USA Sewn Hemlock Patch - Front Underwater Print Fabric Binding On Brim Braided Rope Chin Cord with Wooden Adjustor Elastic Sweatband - Stretches to Fit Unlined Crown Size(s): One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 1/4 (L) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
Close
|
Laurel Lattice Palm Straw Facesaver Hat |
---|
Handcrafted in Mexico UPF 50+ Sun Protection Tula hats are proud to bring you beautiful, contemporary and original designs that are not only sustainable and environmentally friendly, but also Fair Trade. Fostering relationships with artisans in Mexico, Tula ensures fair wages and safe working conditions while providing an avenue to continue their 400 year old tradition of high-quality, handcrafted palm hats. Made of 100% natural palm fiber, Tula hats are naturally water resistant in addition to sustainable and environmentally friendly. Their unique overlapping layers of braided and sewn palm fibers give Tula hats the highest solar protection (UPF – Ultraviolet Protection Factor) rating on the market of 50+. Rigorously tested by California Polytechnic State University, Tula was actually commended for their excellent solar protection by the University: “The brim area of these hats is excellent, in fact, we have never tested anything with 0% transmittance. Congratulations on this protection!” Tula's Laurel Lattice Palm Straw Sun Hat is a versatile sun hat, one that will work great in the garden or while doing outdoor chores in the sun. This hat has a large brim along the front that leads into a very narrow brim towards the nape of the neck. Just as the name invokes, a lattice style weave is along the crown allowing for ventilation during those humid summer months. The Laurel Lattice Sun Hat also has an adjustable chin cord which prevents the hat from flying away in windy conditions or during activity. Approx. 4" Round Crown 4 3/8" Downturned Brim- Front 2 1/2" Downturned Brim - Back Made of: 100% Natural Palm Fiber Handcrafted in Mexico Fair Trade & Sustainable UPF 50+ Sun Protection Rating Environmentally Friendly Suede Hat Band & Adjustable Chincord Elasticized Sweatband Unlined Naturally Water Resistant Size: One Size Fits Most - Fits up to size 7 1/4 (L) comfortably. |
Close
|
Roll Up Toyo Straw Visor |
---|
UPF 50+ Sun Protection Looking for stellar sun protection in a packable, easy to travel with hat? Look no further than the Roll Up Toyo Straw Visor by the San Diego Hat Company! Its supple braided and sewn toyo straw construction allows the Roll Up Visor to easily roll up for hassle-free storage in a purse or bag. Its wide brim provides ample coverage for your face and ears, which, when combined with its UPF 50+ rating provides excellent sun protection. Available in a rainbow of bright and classic colors, you're sure to find a Roll Up Visor that fits your style and personality! Approx. 2 1/8" Open Crown 4 1/4" Downturned Brim Made of: 75% Toyo Straw 25% Polyester UPF 50+ Sun Protection Rating Grosgrain Ribbon Bound Edges Grosgrain Ribbon Sweatband - Adjusts Fit Rollable (Packable) Size: One Size Fits Most - Fits up to size 7 1/2 (XL) comfortably; adjusts via hook and loop strap at back. |
Close
|
Felt Hat Brush |
---|
Information from the book Stetson Hats: "Whether vintage or modern, dust your hat daily with a soft-bristled brush. Stiff bristled brushes will tear the felt. Western stores frequently sell hatter's brushes for this dusting job." For the best maintenance and care of your hat(s), use a dark-colored brush for dark hats and a light colored brush for light hats. For best results, please follow all instructions for use (below) or watch the video here. Approx. 10 5/8" Length 3/4" - 1 1/4" Width Made of: 100% Maple Wood 100% Horse Hair Bristles Size: One Size Instructions for Use: * Brush counter-clockwise direction on the top of your hat. * Brush clockwise direction under the brim. * Brush daily. For Bulk/Wholesale purchase of this hat brush, CLICK HERE or call us at 1-888-847-4287. |
Close
|
Abby Palm Straw Cloche Hat |
---|
Handcrafted in Mexico UPF 50+ Sun Protection Tula hats are proud to bring you beautiful, contemporary and original designs that are not only sustainable and environmentally friendly, but also Fair Trade. Fostering relationships with artisans in Mexico, Tula ensures fair wages and safe working conditions while providing an avenue to continue their 400 year old tradition of high-quality, handcrafted palm hats. Made of 100% natural palm fiber, Tula hats are naturally water resistant in addition to sustainable and environmentally friendly. Their unique overlapping layers of braided and sewn palm fibers give Tula hats the highest solar protection (UPF – Ultraviolet Protection Factor) rating on the market of 50+. Rigorously tested by California Polytechnic State University, Tula was actually commended for their excellent solar protection by the University: “The brim area of these hats is excellent, in fact, we have never tested anything with 0% transmittance. Congratulations on this protection!” The Abby Palm Straw Cloche Hat by Tula features a cloche-like design with a deep bell-shaped crown and down-sloped brim. Minimally adorned with a suede hat band tied in a bow at the side, the Abby boasts an adjustable chincord ideal for wearing during activities or high-wind conditions. An excellent solar protection rating of UPF 50+ and wide, 3+ inch brim make the Abby a beautiful yet functional hat for your every day. Approx. 3 3/4" Square Crown 3 1/8" Downturned Brim Made of: 100% Natural Palm Fiber Handcrafted in Mexico Fair Trade & Sustainable UPF 50+ Sun Protection Rating Environmentally Friendly Elasticized Sweatband Adjustable Chincord Naturally Water Resistant Unlined Size: One Size Fits Most - Fits up to size 7 (M) comfortably. |
Close
|
Liberty Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. UPF 50+ Sun Protection Locally based out of San Diego, CA, Hemlock Hat Co brings you their specialty line of functional, outdoor hats that celebrate self-expression. Trimmed and lined with a wide array of fun, original prints, their lifeguard styles allow you to express your personal style while enjoying everything the outdoors has to offer. The new Liberty Straw Lifeguard Hat features their classic straw lifeguard hat body with a American flag-themed binding on brim, lining and Hemlock sewn patch. An adjustable chin cord adds protection during windy conditions; a stretchy and absorbent sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 3/4" Cattleman Crown 4 1/4" Downturned Brim Made of: Body - 100% Handwoven Straw Lining - 100% Polyester UPF 50+ Sun Protection - American Flag Print Fabric Underbrim Designed in California, USA Sewn Hemlock Patch - Front American Flag Print Fabric Binding On Brim Braided Rope Chin Cord with Wooden Adjustor Elastic Sweatband - Stretches to Fit Unlined Crown Size(s): One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 1/4 (L) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
Close
|
Somerset Palm Straw Cloche Hat |
---|
Handcrafted in Mexico UPF 50+ Sun Protection Tula hats are proud to bring you beautiful, contemporary and original designs that are not only sustainable and environmentally friendly, but also Fair Trade. Fostering relationships with artisans in Mexico, Tula ensures fair wages and safe working conditions while providing an avenue to continue their 400 year old tradition of high-quality, handcrafted palm hats. Made of 100% natural palm fiber, Tula hats are naturally water resistant in addition to sustainable and environmentally friendly. Their unique overlapping layers of braided and sewn palm fibers give Tula hats the highest solar protection (UPF – Ultraviolet Protection Factor) rating on the market of 50+. Rigorously tested by California Polytechnic State University, Tula was actually commended for their excellent solar protection by the University: “The brim area of these hats is excellent, in fact, we have never tested anything with 0% transmittance. Congratulations on this protection!” Featuring a feminine cloche-like style, the Somerset Palm Straw Cloche Hat by Tula boasts a bell-shaped crown and downturned brim. A stylishly wide hat band ties into a bow at the side for a touch of glam. Naturally water resistant and boasting Tula's standard UPF solar protection rating of 50+, the Somerset Hat is ideal for almost any outdoor activity - wear it at the beach, while lounding poolside, while gardening, etc. - all while looking absolutely fabulous! Approx. 3 7/8" Square Crown 3 3/4" Downturned Brim Made of: 100% Natural Palm Fiber Handcrafted in Mexico Fair Trade & Sustainable UPF 50+ Sun Protection Rating Environmentally Friendly Solid Black Hat Band with Bow Elasticized Sweatband Unlined Naturally Water Resistant Size: One Size Fits Most - Fits up to size 7 (M) comfortably. |
Close
|
Hard Plastic Western Hat Can Carrier - Black |
---|
Please Note: This item may have gold OR silver tone clasps (gold tone is featured in the photos above). This feature is assorted and hardware color cannot be selected. Made in the USA Traveling with hats can be a burden but the Hard Plastic Western Hat Can/Carrier helps to solve this problem. Your hat sits upon the inner hat rest that can be adjusted to fit any hat size via the wing-nuts on the bottom of the case. The hat then floats on the rest and the brim is safe from damage. Approx. 9" Height 17" Width 16" Depth Made of: Hard Plastic Made in the USA Stiff Plastic - Protect & Store Your Hats! Handle - Lays Flat When Not in Use (2) Metal Clasps - Secure Lid in Place Crown Insert - Adjusts via Wingnuts Under Carrier Fits Hats up to 5" Crown Fits Hats up to 4" Brim Size: One Size - Fits hats up to 5" Crown and 4" Brim. |
Close
|
Hat Cleaning Sponge |
---|
Made in the USA The Village Hat Shop Hat Cleaning Sponge is the serious hatter's tool of choice when cleaning surface spots on hats. Easily wipes away dirt, dust and grime. It is always used dry and cleans without chemicals. Like a pencil eraser, one carefully rubs the surface spot until it "balls up" and can be brushed away. Can be used on all shades of hats - for best results, use a separate sponge for each different color of hat. For best results, please follow all manufacturer instructions for use (below). Approx. 3 3/4" Length 2 1/8" Width Made of: 100% All Natural Latex Rubber Size: (1) Sponge Manufacturer Instructions for Use: * Always use dry. * Locate the soiled area and gently rub the sponge upon the spot. Any debris can be brushed into a trash receptacle. * When the surface of the sponge becomes clogged with dirt/grime, simply remove a layer by shaving with a razor blade or cutting off the section with a pair of scissors; or replace with a new sponge. * Do not wring out the sponge with water or clean it with any chemicals/cleansers. |
Close
|
Skipper Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. UPF 50+ Sun Protection Locally based out of San Diego, CA, Hemlock Hat Co brings you their specialty line of functional, outdoor hats that celebrate self-expression. Trimmed and lined with a wide array of fun, original prints, their lifeguard styles allow you to express your personal style while enjoying everything the outdoors has to offer. The new Skipper Straw Lifeguard Hat features their classic straw lifeguard hat body with a sea life-themed binding on brim, lining and Hemlock sewn patch. An adjustable chin cord adds protection during windy conditions; a stretchy and absorbent sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 3/4" Cattleman Crown 4 3/8" Downturned Brim Made of: Body - 100% Handwoven Straw Lining - 100% Polyester UPF 50+ Sun Protection - Sea Life Print Fabric Underbrim Designed in California, USA Sewn Hemlock Patch - Front Sea Life Print Fabric Binding On Brim Braided Rope Chin Cord with Wooden Adjustor Elastic Sweatband - Stretches to Fit Unlined Crown Size(s): One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 1/4 (L) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
Close
|
Sun Dialed Toyo Straw Fedora Hat |
---|
San Diego Hat Company's Sun Dialed Toyo Straw Fedora Hat is a beautiful show of craftmanship. With its raffia straw that has been woven into a multipatterned design, this fedora's textural finish is what draws the eye. The braided straw hat band with tassels blends seamlessly into the crown. Flip it over and you have a grosgrain ribbon sweatband with an adjustable drawstring to give you that perfect fit! Approx. 4 1/4" Center Pinch Crown 4 3/4" Downturned Brim Made of: 100% Toyo Straw Multipattern Woven Straw Design Braided Straw Hat Band with Tassels Underwelt Brim Grosgrain Ribbon Sweatband - Adjustable Drawstring Unlined Size(s): One Size Fits Most - Fits up to size 7 (M) comfortably; adjustable drawstring sweatband for comfortable fit. |
Close
|
Bali Cotton Crochet Sun Hat |
---|
UPF 50+ Sun Protection San Diego Hat Company's Bali Cotton Crochet Sun Hat features a classic sun hat design handmade of soft, all-natural cotton in a crocheted finished. The Bali is the hat that started it all for San Diego Hat Co. - and for good reason! This stylish hat provides ample coverage, UPF 50+ sun protection, is completely packable and crushable, and handmade so each hat is unique! Perfect for a day at the beach, pool, or any other outdoor activity, the Bali Cotton Crochet Sun Hat by San Diego Hat Co. is sure to become your favorite this spring and summer! Approx. 4" Crown 4" Floppy Brim Made of: 100% Cotton UPF 50+ Sun Protection Handmade - Each Hat is Unique! Crocheted Design Packable / Crushable Brim's Edge Inserts - Provide Structure Unlined Stretchable Breathable Size(s): One Size Fits Most. Stretches to fit sizes 6 7/8 (S) - 7 3/8 (L) comfortably. |
Close
|
Cotton Terry Cloth Bucket Hat |
---|
The Cotton Terry Cloth Bucket Hat by San Diego Hat Company is a fun and trendy bucket hat for the coming spring and summer months! Features a terry cloth finish and an array of bright, fashionable colors. Adjust the interior drawstring to your perfect fit! Approx. 3 3/4" Square Crown 2 3/8" Downturned Brim Made of: 100% Cotton Packable/Crushable Terry Cloth Finish Cotton Sweatband - Adjustable Drawstring Inseam Taping Cotton Lining Size(s): One Size Fits Most - Fits up to size 7 1/4 (L) comfortably; adjustable drawstring sweatband for comfortable fit. |
Close
|
Polka Dot 3-Pleat Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring classic white polka dots against black, brown or navy, the Polka Dot 3-Pleat Puggaree Hat Band by Capas Headwear will add a fresh new twist to your favorite hat. For best results, please follow all instructions for use (below). Approx. 26 1/2" Total Length, End to End 1 7/8" Width Made of: 100% Cotton 3-Pleat Puggaree Hat Band Cotton Twill Fabric Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Ultrabraid Water Repellent Toyo Straw Fedora Rain Hat |
---|
UPF 50+ Sun Protection Sometimes, simple is better, like with the Ultrabraid Water Repellent Toyo Straw Blend Fedora Rain Hat from the San Diego Hat Company! This fedora keeps it clean and tidy, with a sewn braid toyo straw build, and a braided straw hat band tied around the crown with a bow. The unlined interior is breathable and, just like the rest of the hat, simple! Approx. 4" Center Pinch Crown 3 3/4" Center Pinch Crown - Back 3 1/4" Floppy Brim Made of: 80% Toyo Straw 20% Polyester UPF 50+ Sun Protection Water Repellent Woven Straw Build Braided Straw Hat Band with Bow Adjustable Drawstring Grosgrain Ribbon Sweatband Unlined Size: One Size Fits Most - Fits up to size 7 1/8 (M) comfortably; adjustable drawstring sweatband for comfortable fit. |
Close
|
Casablanca Rush Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. UPF 50+ Sun Protection Locally based out of San Diego, CA, Hemlock Hat Co brings you their specialty line of functional, outdoor hats that celebrate self-expression. Trimmed and lined with a wide array of fun, original prints, their lifeguard styles allow you to express your personal style while enjoying everything the outdoors has to offer. The new Casablanca Rush Straw Lifeguard Hat features their classic straw lifeguard hat body with a Casablanca-themed binding on brim, lining and Hemlock sewn patch. An adjustable chin cord adds protection during windy conditions; a stretchy and absorbent sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 3/4" Cattleman Crown 4 1/2" Downturned Brim Made of: Body - 100% Handwoven Rush Straw Lining - 100% Polyester UPF 50+ Sun Protection - Tropical Print Fabric Underbrim Designed in California, USA Sewn Hemlock Patch - Front Tropical Print Fabric Binding On Brim Braided Rope Chin Cord with Wooden Adjustor Elastic Sweatband - Stretches to Fit Unlined Crown Size(s): One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 1/4 (L) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
Close
|
Vic Rush Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. UPF 50+ Sun Protection Locally based out of San Diego, CA, Hemlock Hat Co brings you their specialty line of functional, outdoor hats that celebrate self-expression. Trimmed and lined with a wide array of fun, original prints, their lifeguard styles allow you to express your personal style while enjoying everything the outdoors has to offer. The new Siesta Straw Lifeguard Hat features their classic straw lifeguard hat body with cocktail-themed binding on brim, underbrim and Hemlock sewn patch. An adjustable chin cord adds protection during windy conditions; a stretchy and absorbent sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 3/4" Cattleman Crown 4 1/2" Downturned Brim Made of: Body - 100% Handwoven Rush Straw Lining - 100% Polyester UPF 50+ Sun Protection - Tiki Cocktail Print Fabric Underbrim Designed in California, USA Sewn Hemlock Patch - Front Tiki Cocktail Print Fabric Binding On Brim Braided Rope Chin Cord with Wooden Adjustor Elastic Sweatband - Stretches to Fit Unlined Crown Size(s): One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 1/4 (L) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
Close
|
Blackout Straw Lifeguard Hat |
---|
Please Note: Weave may vary slightly from piece to piece. Each hat is individually crafted and is unique in its own way. Locally based out of San Diego, CA, Hemlock Hat Co brings you their specialty line of functional, outdoor hats that celebrate self-expression. Trimmed and lined with a wide array of fun, original prints, their lifeguard styles allow you to express your personal style while enjoying everything the outdoors has to offer. The new Blackout Straw Lifeguard Hat features their classic straw lifeguard hat body with a black-colored trim, lining and Hemlock sewn patch. An adjustable chincord adds protection during windy conditions; a stretchy and absorbent sweatband completes the style. Perfect for wearing poolside, at the beach, on a hike or anywhere else the sun shines. Approx. 4 3/4" Cattleman Crown 4 5/8" Downturned Brim Made of: Body - 100% Handwoven Seagrass and Rush Straw Lining - 100% Polyester Designed in California, USA Sewn Hemlock Patch - Front Blackout Print Fabric Trimmed Brim UPF 50+ Blackout Print Fabric Underbrim Braided Rope Chin Cord with Wooden Adjustor Elastic Sweatband - Stretches to Fit Unlined Crown Size(s): One Size Fits Most - Stretches to fit sizes 6 7/8 (S) - 7 1/4 (L) comfortably. Manufacturer's Care Instructions: * To help preserve the structure of your hat, put on and remove your hat by holding the brim in the front and back. The crown of your hat is more prone to straw cracking. * When not wearing your hat it is best to store it in a place that avoids direct sunlight and or damp conditions. This could be on a flat surface or hung by the drawstring. It is okay to carefully stack multiple hats. * It is best to never get your hat wet. If it does get wet, use a clean cloth to pat dry your hat. Once most of the moisture is off the hat let your hat continue to air-dry in a cool and dry place that is well circulated. * If the brim of your hat starts to curve you can flip the brim up and run your hand around it in a circular motion until it retains its shape. * We recommend using a clean cloth to wipe off dust and small dirty spots. For spots that aren’t easily wiped off you can use a white artist eraser to gently remove dirt. Avoid colored erasers that could leave color on the straw. |
Close
|
Capri Wheat Straw Visor |
---|
Maybe its a messy bun or a low ponytail, the Capri Wheat Straw Visor by Hemlock Hat Co will pair with any do you wear on the go. Made of 100% wheat straw that has been handwoven, making each piece completely unique. Features a soft and breathable linen sweatband with an elastic strap closure at the back. Approx. 2" Open Crown 4 1/2" Bill/Visor Made of: 100% Wheat Straw Handwoven Body Increased UV Resistance Metal Side Pin Linen Sweatband Elastic Strap - Back Unlined Size(s): One Size Fits Most - Fits up to size 7 1/4(L) comfortably. |
Close
|
Starburst 3-Pleat Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a great new starburst print in varying colors, the Starburst 3-Pleat Puggaree Hat Band by Capas Headwear will give a colorful new twist to your favorite hat. Approx. 29" Total Length, End to End 1 7/8" Width Made of: 100% Polyester Instructions for Use: * Fasten the unfinished end of the pug band on the lower left side of the crown. * Wrap hatband around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hatband closest to the base of the crown. *Traditionally, men's hatbands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! |
Close
|
Printed Cotton Bandana |
---|
FINAL SALE The bandana has been worn by almost everyone at some point in time. This simple piece of fabric can change a person's look in 10 seconds! This 21 1/2" x 21 1/2" square is great as a handkerchief, bandana, face mask, or scarf. Approx. 21 1/2" L x 21 1/2" W Made of: 100% Cotton Patterned Bandana Square Size: One Size Fits Most. FINAL SALE |
Close
|
Cotton Twill 3-Pleat Puggaree Hat Band - Khaki |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a multitude of great colors, the 3-Pleat Puggaree Cotton Twill Hat Band by Village Hat Shop will give a fresh new look to your favorite hat. For best results, please follow all instructions for use (below). Approx. 28" Total Length, End to End 2" Width Made of: 100% Cotton Twill 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
USA: 1-888-VHS-HATS (1-888-847-4287)
INT'L: +1 619-906-4440 Se habla español
Shop for Hats at VillageHatShop.com | Privacy Policy | Website Accessibility | Site Map
Copyright © 1999-2020 Village Hat Shop: The #1 Source for Hats Online
*ALL SPECIAL OFFERS AND DISCOUNTS
Excludes wholesale/B2B, Certain Brand Restrictions, Special Orders or Where Otherwise Noted.
CONTACT USWe are happy to help! |
1 (888) 847-4287Mon-Sun 8am-4:00pm |