Close
|
Wool Fashion Beret |
---|
Made of 100% wool, Village Hat Shop brings you the timeless Wool Fashion Beret in a wide assortment of colors. Sleek and simple, this seamless wool beret is topped with a small tonal tassel. Wear it tilted to either side of your head, centered or towards the back - the Wool Fashion Beret adds a touch of effortless French flair to your look! Approx. 11" Diameter Made of: 100% Wool Center Top Tassel Unlined Packable / Crushable Soft Size: One Size Fits Most - Fits up to size 7 1/8 (M) comfortably. For Bulk/Wholesale purchase of this hat, CLICK HERE or call us at 1-888-847-4287. |
Close
|
Break Away Chin Cord |
---|
Please Note: This chin cord works best with leather, suede, or faux leather sweatbands. For a hat to be compatible, wire chin cord hooks must fit inside the crown. The Break Away Chin Cord by Akubra is perfect for those with an adventurous lifestyle. Cleverly designed to break away from your hat if snagged, this chin cord is perfect for horseback riding, rock climbing, hiking and many other outdoor activities. Also ensures against the loss of your hat in high winds. Approx. 17" Length Made of: 100% Nylon Designed in Australia Plastic Releases - Pulls Apart with Excessive Tension Adjustable Metal Toggle Wire Chin Cord Hooks Fitting Instructions Included Size(s): One Size Fits Most - works best with certain hats. Please see disclaimer at top of description. |
Close
|
Stampede String Chin Strap |
---|
Made in the USA Hold on to your hat! Chin cord/straps, known in cattle country as stampede strings, ensure against the loss of your hat in wind or brush. The Stampede String Chin Strap isn't only for ranchers working cattle on the open range. Anyone who wants to keep their hat from blowing away will find it useful. Featuring a sliding knot that joins together two, four plait braids of leather, this chin cord/strap is practical and looks great! How it works: Two cotter pins slide between the sweatband and the hat body. Once bent, they provide a secure attachment of the stampede string. Approx. 19" Length (Excluding End Pins) Made of: 100% Kangaroo Leather Sliding Knot Four Plait Braided Leather on Each String Size: One Size Fits Most Manufacturer Instructions for Use: * Hold the cotter pins tightly together and push them through the stitching where the sweatband meets the body. * Pull the pins completely through the base of the sweatband until the braid is firmly against the sweatband. * Spread the pins outward, as close to horizontal as possible. * Check by tugging on the braid. |
Close
|
Cotton Twill 3-Pleat Puggaree Hat Band - Khaki |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a multitude of great colors, the 3-Pleat Puggaree Cotton Twill Hat Band by Village Hat Shop will give a fresh new look to your favorite hat. For best results, please follow all instructions for use (below). Approx. 28" Total Length, End to End 2" Width Made of: 100% Cotton Twill 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Poly Mesh Mustache Hat Sizer Pack - Black |
---|
Please Note: 1 pack contains 2 individual mustache hat sizers. Find yourself in-between hat sizes? Want your hat to fit your head a big snugger? Prefer the added comfort of a cushioned sweatband? All can be achieved with the Village Hat Shop's own Poly Mesh Hat Sizer Pack that helps size your hat down by 1/2 a size. Feels as cushioned as a pillow and available in black for your convenience. For best results, please follow all instructions for use (below). Instructions: * Peel off the backing from the sizer. * Stick to the front section of the hat's sweatband or whatever area the hat has a loose fit (front, back or sides). You can also place the sizer behind the sweatband, directly onto the hat, or onto the backside of the sweatband. * Discard the used strip when soiled and replace. Approx. 8 1/2" Length 2" Height Made of: 100% Polyester 2-Pack of Mesh Hat Sizers Size(s): One Size Fits Most - 1 pack contains 2 individual hat sizers. For Bulk/Wholesale purchase of this item, CLICK HERE or call us at 1-888-847-4287. |
Close
|
Cotton Twill 3-Pleat Puggaree Hat Band - Navy Blue |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a multitude of great colors, the 3-Pleat Puggaree Cotton Twill Hat Band by Village Hat Shop will give a fresh new look to your favorite hat. For best results, please follow all instructions for use (below). Approx. 28" Total Length, End to End 2" Width Made of: 100% Cotton Twill 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Fez Tassel |
---|
With the great assortment of color tassels from the Village Hat Shop, you can now fancify your fez and switch up the fun with your favorite hat! Approx. 11" Long Made of: 100% Polyester |
Close
|
Printed Cotton Bandana |
---|
FINAL SALE The bandana has been worn by almost everyone at some point in time. This simple piece of fabric can change a person's look in 10 seconds! This 21 1/2" x 21 1/2" square is great as a handkerchief, bandana, face mask, or scarf. Approx. 21 1/2" L x 21 1/2" W Made of: 100% Cotton Patterned Bandana Square Size: One Size Fits Most. FINAL SALE |
Close
|
Genuine Government Issue Wool Watch Cap |
---|
Made in the USA This watch cap (also known as a beanie) is NOT the cheap acrylic cap that you find around. Instead, this is watch cap is made to the specifications of the USA Department of Defense. The design, the material, the knitting quality and stitches per inch, the colorfastness, the finished weight, are all as per the USA military requirements. Approx. 9" Height - Flat 6" Width - Flat 3" Cuff Made of: 100% Wool Made in the USA Double-Wall Construction Cuff - Wear Folded Up or Down Size: One Size Fits Most - Stretches to fit up to size 7 3/4 (XXL). For Bulk/Wholesale purchase of this hat, CLICK HERE or call us at 1-888-847-4287. |
Close
|
Modelaine Wool Felt Beret |
---|
Featuring a sleek and classic design, the new Kangol Modelaine Wool Felt Beret is made of 100% pure new wool felt in three great colors. Designed in Britain with a classic 11-inch diameter, the Modelaine Beret makes a great basic, everyday-wear beret. Approx. 11" Diameter Made of: 100% Pure New Wool Tonal Tassel Embroidered Kangol Side Hit Unlined Packable/Crushable Size: One Size Fits Most - Stretches to fit up to size 7 3/8 (L) comfortably. |
Close
|
Cotton Twill 3-Pleat Puggaree Hat Band - Black |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a multitude of great colors, the 3-Pleat Puggaree Cotton Twill Hat Band by Village Hat Shop will give a fresh new look to your favorite hat. Approx. 28" Total Length, End to End 2" Width Made of: 100% Cotton Twill 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Solid Cotton Bandana |
---|
FINAL SALE The bandana has been worn by almost everyone at some point in time. This simple piece of fabric can change a person's look in 10 seconds! This 21 1/2" x 21 1/2" square is great as a handkerchief, bandana, face mask, or scarf. Approx. 21 1/2" L x 21 1/2" W Made of: 100% Cotton Solid Bandana Square Size: One Size Fits Most FINAL SALE |
Close
|
Sliced Peak Billed Knit Beanie Hat |
---|
The Sliced Peak Billed Knit Beanie Hat is an retro inspired beanie (also known as a Jeep Cap or Radar Cap) by Kangol that features a pre-curved bill making it a hat that not only shields your eyes from the glare of the sun but also keeps you warm. May seem like an oxymoron but the sun can still shine in winter. The body features a ribbed design, is cuffed at the back with an embroidered Kangol logo, giving it a contemporary, streetwear look. Approx. 5 1/2" Length (Flat) 1 7/8" Pre-Curved Bill Made of: 80% Acrylic 20% Nylon Classic 'Jeep Cap' Silhouette Ribbed Design Cuffed Embroidered Kangol Logo - Back Kangol Tag - Back Cuff Unlined Size(s): One Size Fits Most - fits up to size 7 1/2 (XL) comfortably. |
Close
|
Cotton Twill 3-Pleat Puggaree Hat Band - Red |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a multitude of great colors, the 3-Pleat Puggaree Cotton Twill Hat Band by Village Hat Shop will give a fresh new look to your favorite hat. For best results, please follow all instructions for use (below). Approx. 28" Total Length, End to End 2" Width Made of: 100% Cotton Twill 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Sheep This Knit Beanie Hat |
---|
"Baa baa black sheep, have you any wool?" No sir, no sir, because the Goorin Bros Sheep This Knit Beanie Hat is made of 100% acrylic. If you have a wool allergy, this beanie is made for you. The double wall construction rib knit body ensures heat retention in cold weather. The black sheep patch is located on the 3" folded cuff. Ewe are one in a million, so show it off with the Sheep This Beanie Hat this season. Approx. 8 1/2" Height 9 1/2" Width Made of: 100% Acrylic Rib Knit Double Layer Body Goorin Bros Logo Label Black Sheep Patch on Front 3" Cuff Unlined Size(s): One Size Fits Most - Fits up to size 7 3/4 (XXL) comfortably. |
Close
|
Night Marie Knit Beanie Hat |
---|
If you're an absolute animal, you definitely need the Night Marie Knit Beanie Hat from Goorin Bros! This casual beanie features a rib knit body with the classic folded cuff. Additionally, the stallion patch on the front of the beanie really shows off your wild side! Also available in Snapback Baseball Cap. Approx. 9" Height 8 1/2" Width Made of: 100% Acrylic Rib Knit Body Cuff Goorin Bros Logo Label Stallion Patch on Front Unlined Size(s): One Size Fits Most - Fits up to size 7 3/4 (XXL) comfortably. |
Close
|
Cotton Twill 3-Pleat Puggaree Hat Band - White |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a multitude of great colors, the 3-Pleat Puggaree Cotton Twill Hat Band by Village Hat Shop will give a fresh new look to your favorite hat. For best results, please follow all instructions for use (below). Approx. 28" Total Length, End to End 2" Width Made of: 100% Cotton Twill 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Faux Fur Beanie Hat |
---|
Stay snug and stylish in chilly weather with Kangol’s Faux Fur Beanie Hat. Featuring a classic cuffed beanie look with a contemporary plush and soft faux fur finish. The tonal embroidered kangaroo logo adorns the front as a hallmark of Kangol’s renowned quality. Approx. 9 1/2" Height - Flat 8 1/2" Width - Flat 2 3/4" Cuff Made of: 100% Nylon - Faux Fur Finish Faux Fur Knit Tonal Embroidered Kangaroo Logo - Front Cuffed Unlined Size(s): One Size Fits Most - Fits up to size 8 comfortably. |
Close
|
Toasty Freedom Knit Beanie Hat |
---|
If you're an absolute animal, you definitely need the Toasty Freedom Knit Beanie Hat from Goorin Bros! This casual beanie features a rib knit body with the classic folded cuff. Additionally, the Freedom patch on the front of the beanie really shows off your wild side! Also available in Snapback Baseball Cap. Approx. 9" Height 8 1/2" Width Made of: 100% Acrylic Rib Knit Body Extra Wide Cuff Goorin Bros Logo Label Eagle Patch on Front Unlined Size(s): One Size Fits Most - Fits up to size 7 3/4 (XXL) comfortably. |
Close
|
Ewe R Hot Knit Beanie Hat |
---|
If you're an absolute animal, you definitely need the Ewe R Hot Knit Beanie Hat from Goorin Bros! This casual beanie features a rib knit body with the classic folded cuff. Additionally, the Black Sheep patch on the front of the beanie really shows off your wild side! Also available in Snapback Baseball Cap. Approx. 9" Height 8 1/2" Width Made of: 100% Acrylic Rib Knit Body Extra Wide Cuff Goorin Bros Logo Label Sheep Patch on Front Unlined Size(s): One Size Fits Most - Fits up to size 7 3/4 (XXL) comfortably. |
Close
|
Furgora Cuff Beanie Hat |
---|
Kangol's Furgora Cuff Beanie Hat is the newest in the line for fall/winter. Fashioned after the classic cuff beanie silhouette, furgora yarn amps up the volume with its uber soft texture. Turn the cuff down for a more slouchy beanie look on those toasty nights in from the cold. Approx. 9" Height - Flat 9 1/2" Width - Flat 2 1/2" Cuff Made of: 64% Angora (Rabbit Fur) 28% Nylon 8% Elastane Angora Fur Yarn Kangol Kangaroo Embroidery - Center Front Cuff Unlined Size(s): One Size Fits Most - Fits up to size 7 1/4 (L) comfortably. |
Close
|
Cardinal 2-Way Knit Beanie Hat |
---|
A stylish and classic beanie in a plethora of colors, Kangol gives us the Cardinal 2-Way Knit Beanie Hat. With the convenience of the Kangol logo being embroidered twice, you can wear this hat both cuffed or uncuffed with the logo always front and center. Features an extra chunky design and is unlined Approx. 9 1/2" Height, Flat 8 1/2" Length, Flat Made of: 86% Acrylic 14% Nylon Extra Chunky Design 2 Ways to Wear - Cuffed or Uncuffed Kangol Embroidered Logo Unlined Size(s): One Size Fits Most - Fits up to size 7 1/2 (XL) comfortably. |
Close
|
Haute Goat Knit Beanie Hat |
---|
If you're an absolute animal, you definitely need the Haute Goat Knit Beanie Hat from Goorin Bros! This casual beanie features a rib knit body with the classic folded cuff. Additionally, the G.O.A.T. patch on the front of the beanie really shows off your wild side! Also available in a Snapback Baseball Cap. Approx. 9" Height 8 1/2" Width Made of: 100% Acrylic Rib Knit Body Extra Wide Cuff Goorin Bros Logo Label Goat Patch on Front Unlined Size(s): One Size Fits Most - Fits up to size 7 3/4 (XXL) comfortably. |
Close
|
Cuff Pull-On Knit Beanie Hat |
---|
Kangol's Cuff Pull-On Knit Beanie Hat allows for versatility due to the cuff feature that can be worn up or down. Whichever way you choose, the Kangol Kangaroo will always be visible thanks to the double branding. We see the Kangol quality in the double-thick knitted rib design, which allowing for stretch, comfort and a great fit! Approx. 8" Height - Flat 8 1/4" Width - Flat Made of: 100% Acrylic Double-Layer Knit Design Kangol Logo Double Branding Cuff Unlined Size(s): One Size Fits Most - Fits up to size 7 1/4 (L) comfortably. |
Close
|
Morning Call Knit Beanie Hat |
---|
If you're a fan of the The Farm design line from Goorin Bros, you certainly have a few of the ball caps in your collection. Round it out with the Morning Call Knit Beanie Hat. The 100% acrylic double wall rib knit body will keep you warm when the temp is cold at the crack of dawn. The embroidered rooster patch on the 3" folded cuff can easily be pulled down if you need to hit that snooze button. There's nothing you can't cock a doodle do with the Morning Call Beanie Hat. Approx. 8 1/2" Height 9 1/2" Width Made of: 100% Acrylic Rib Knit Double Layer Body Goorin Bros Logo Label Rooster Patch on Front 3" Cuff Unlined Size(s): One Size Fits Most - Fits up to size 7 3/4 (XXL) comfortably. |
Close
|
Hear Me Roar Knit Beanie Hat |
---|
If you're an absolute animal, you definitely need the Hear Me Roar Knit Beanie Hat from Goorin Bros! This casual beanie features a rib knit body with the classic folded cuff. Additionally, the lion patch on the front of the beanie really shows off your wild side! Also available in Snapback Baseball Cap. Approx. 9" Height 8 1/2" Width Made of: 100% Acrylic Rib Knit Body Cuff Goorin Bros Logo Label Lion Patch on Front Unlined Size(s): One Size Fits Most - Fits up to size 7 3/4 (XXL) comfortably. |
Close
|
Hot Tiger Knit Beanie Hat |
---|
If you're an absolute animal, you definitely need the Hot Tiger Knit Beanie Hat from Goorin Bros! This casual beanie features a rib knit body with the classic folded cuff. Additionally, the Tiger patch on the front of the beanie really shows off your wild side! Also available in Snapback Baseball Cap. Approx. 9" Height 8 1/2" Width Made of: 100% Acrylic Rib Knit Body Extra Wide Cuff Goorin Bros Logo Label Tiger Patch on Front Unlined Size(s): One Size Fits Most - Fits up to size 7 3/4 (XXL) comfortably. |
Close
|
On the Hunt Knit Beanie Hat |
---|
Are you on the prowl, you definitely need the On the Hunt Beanie from Goorin Bros! This casual beanie features a rib knit body with the classic folded cuff. Additionally, the panther patch on the front of the beanie really shows off your wild side! Also available in Snapback Baseball Cap. Approx. 9" Height 8 1/2" Width Made of: 100% Acrylic Rib Knit Body Cuff Goorin Bros Logo Label Panther Patch on Front Unlined Size(s): One Size Fits Most - Fits up to size 7 3/4 (XXL) comfortably. |
USA: 1-888-VHS-HATS (1-888-847-4287)
INT'L: +1 619-906-4440 Se habla español
Shop for Hats at VillageHatShop.com | Privacy Policy | Website Accessibility | Site Map
Copyright © 1999-2020 Village Hat Shop: The #1 Source for Hats Online
*ALL SPECIAL OFFERS AND DISCOUNTS
Excludes wholesale/B2B, Certain Brand Restrictions, Special Orders or Where Otherwise Noted.
CONTACT USWe are happy to help! |
1 (888) 847-4287Mon-Sun 8am-4:00pm |