Close
|
Leather Stampede String Chin Strap |
---|
Time to switch out your worn out chin strap for a new reliable one? SunBody offers a leather chin cord/chin strap at an affordable price. Just thread through the existing chin strap/chin cord eyelets of your hat and tie the ends for a great looking two-in-one hat band and chin cord. Approx. 36" Length Made of: 100% Genuine Leather Adjustable Toggle Will Fit 1/8" Inside Diameter Eyelets Size: One Size - Use toggle to adjust chin strap length. Length may also be cut to fit your needs. |
Close
|
Wool Fashion Beret |
---|
Made of 100% wool, Village Hat Shop brings you the timeless Wool Fashion Beret in a wide assortment of colors. Sleek and simple, this seamless wool beret is topped with a small tonal tassel. Wear it tilted to either side of your head, centered or towards the back - the Wool Fashion Beret adds a touch of effortless French flair to your look! Approx. 11" Diameter Made of: 100% Wool Center Top Tassel Unlined Packable / Crushable Soft Size: One Size Fits Most - Fits up to size 7 1/8 (M) comfortably. For Bulk/Wholesale purchase of this hat, CLICK HERE or call us at 1-888-847-4287. |
Close
|
Cotton Twill 3-Pleat Puggaree Hat Band - Khaki |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a multitude of great colors, the 3-Pleat Puggaree Cotton Twill Hat Band by Village Hat Shop will give a fresh new look to your favorite hat. For best results, please follow all instructions for use (below). Approx. 28" Total Length, End to End 2" Width Made of: 100% Cotton Twill 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Cotton Twill 3-Pleat Puggaree Hat Band - Navy Blue |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a multitude of great colors, the 3-Pleat Puggaree Cotton Twill Hat Band by Village Hat Shop will give a fresh new look to your favorite hat. For best results, please follow all instructions for use (below). Approx. 28" Total Length, End to End 2" Width Made of: 100% Cotton Twill 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Poly Mesh Mustache Hat Sizer Pack - Black |
---|
Please Note: 1 pack contains 2 individual mustache hat sizers. Find yourself in-between hat sizes? Want your hat to fit your head a big snugger? Prefer the added comfort of a cushioned sweatband? All can be achieved with the Village Hat Shop's own Poly Mesh Hat Sizer Pack that helps size your hat down by 1/2 a size. Feels as cushioned as a pillow and available in black for your convenience. For best results, please follow all instructions for use (below). Instructions: * Peel off the backing from the sizer. * Stick to the front section of the hat's sweatband or whatever area the hat has a loose fit (front, back or sides). You can also place the sizer behind the sweatband, directly onto the hat, or onto the backside of the sweatband. * Discard the used strip when soiled and replace. Approx. 8 1/2" Length 2" Height Made of: 100% Polyester 2-Pack of Mesh Hat Sizers Size(s): One Size Fits Most - 1 pack contains 2 individual hat sizers. For Bulk/Wholesale purchase of this item, CLICK HERE or call us at 1-888-847-4287. |
Close
|
Cotton Twill 3-Pleat Puggaree Hat Band - Red |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a multitude of great colors, the 3-Pleat Puggaree Cotton Twill Hat Band by Village Hat Shop will give a fresh new look to your favorite hat. For best results, please follow all instructions for use (below). Approx. 28" Total Length, End to End 2" Width Made of: 100% Cotton Twill 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Cotton Twill 3-Pleat Puggaree Hat Band - White |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a multitude of great colors, the 3-Pleat Puggaree Cotton Twill Hat Band by Village Hat Shop will give a fresh new look to your favorite hat. For best results, please follow all instructions for use (below). Approx. 28" Total Length, End to End 2" Width Made of: 100% Cotton Twill 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Genuine Government Issue Wool Watch Cap |
---|
Made in the USA This watch cap (also known as a beanie) is NOT the cheap acrylic cap that you find around. Instead, this is watch cap is made to the specifications of the USA Department of Defense. The design, the material, the knitting quality and stitches per inch, the colorfastness, the finished weight, are all as per the USA military requirements. Approx. 9" Height - Flat 6" Width - Flat 3" Cuff Made of: 100% Wool Made in the USA Double-Wall Construction Cuff - Wear Folded Up or Down Size: One Size Fits Most - Stretches to fit up to size 7 3/4 (XXL). For Bulk/Wholesale purchase of this hat, CLICK HERE or call us at 1-888-847-4287. |
Close
|
Cotton Twill 3-Pleat Puggaree Hat Band - Black |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a multitude of great colors, the 3-Pleat Puggaree Cotton Twill Hat Band by Village Hat Shop will give a fresh new look to your favorite hat. Approx. 28" Total Length, End to End 2" Width Made of: 100% Cotton Twill 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
USA: 1-888-VHS-HATS (1-888-847-4287)
INT'L: +1 619-906-4440 Se habla español
Shop for Hats at VillageHatShop.com | Privacy Policy | Website Accessibility | Site Map
Copyright © 1999-2020 Village Hat Shop: The #1 Source for Hats Online
*ALL SPECIAL OFFERS AND DISCOUNTS
Excludes wholesale/B2B, Certain Brand Restrictions, Special Orders or Where Otherwise Noted.
CONTACT USWe are happy to help! |
1 (888) 847-4287Mon-Sun 8am-4:00pm |