Close
|
French Pith Helmet |
---|
Please Note: Due to the handmade nature of Pith Helmets, be advised there might be minor imperfections in the construction of the hat. These imperfections do not hinder the look or wear of the helmet. Made in Vietnam This French style pith helmet is the original design from Vietnam. A hundred years ago, the French discovered the advantages of the material used to make these hats. The pith is from trees in northern Vietnam and has properties that make it both a good sun and rain shield. These helmets are handmade in Vietnam using the techniques inherited by the former French occupiers. Please Note: Pith helmets can be immersed in water, whereby the wearer stays cool during use on hot summer days. Please submerge the outside of the helmet carefully, without allowing water to spill into the interior of the helmet. Approx. 4 1/2" Crown 2 3/4" Front and Back Brim 2 1/2" Side Brims Made of: 100% Genuine Pith Handmade Cotton Twill Exterior Composite Leather Decorative Strap Size Adjustable Inner Harness Cotton Poplin Lining Lightweight Dunk in Water to Keep Cool Sizes: S/M fits sizes 6 7/8 (S) to 7 1/4 (L); L/XL* fits sizes 7 1/4 (L) to 7 1/2 (XL); adjusts via a hook and loop ending to the interior sweatband. *Size L/XL was previously sold as the "Big Head" version of this style prior to consolidation. For Bulk/ Wholesale Purchase of this hat, CLICK HERE or call us at 1-888-847-4287. |
Close
|
Indian Pith Helmet |
---|
Please Note: Due to the handmade nature of Pith Helmets, be advised there might be minor imperfections in the construction of the hat. These imperfections do not hinder the look or wear of the helmet. Made in Vietnam This Indian style pith helmet, a.k.a. the Bombay Bowler, is the most popular pith helmet style in North America. These hats are made from the cork, or pith, of trees from northern Vietnam using techniques developed 100 years ago by the French during their occupation. The helmet is functional in both sunny and rainy weather. Please Note: Pith helmets can be immersed in water, whereby the wearer stays cool during use on hot summer days. Please submerge the outside of the helmet carefully, without allowing water to spill into the interior of the helmet. Approx. 4 1/2" Crown 2 1/2" Brim - Front 2 3/4" Brim - Back 2 1/4" Brim - Sides Made of: 100% Genuine Pith Handmade Cotton Twill Exterior Composite Leather Decorative Strap Size Adjustable Inner Harness Cotton Poplin Lining Lightweight Dunk in Water to Keep Cool Sizes: S/M fits sizes 6 7/8 (S) to 7 1/4 (L); L/XL* fits sizes 7 1/4 (L) to 7 3/4 (XXL); adjusts via a hook and loop ending to the interior sweatband. *Size L/XL was previously sold as the "Big Head" version of this style prior to consolidation. For Bulk/Wholesale purchase of this hat, CLICK HERE or call us at 1-888-847-4287. |
Close
|
African Safari Pith Helmet |
---|
Please Note: Due to the handmade nature of Pith Helmets, be advised there might be minor imperfections in the construction of the hat. These imperfections do not hinder the look or wear of the helmet. Made in Vietnam The African Safari Pith Helmet is made from the core (pith) of trees that grow in northern Vietnam. They are handmade one piece at a time. This helmet, like all other pith helmets we carry, is incredible lightweight as the 4-ply wood interior has a low density (similar to balsa wood). This and our other pith helmets can be immersed in water to keep the wearer cool during hot weather. (Please submerge the outside of the helmet carefully, without allowing water to spill into the interior of the helmet.) Featuring a dark khaki cotton twill with a stylish cream pleated hat band, the African Safari Pith Helmet is ready for adventure! Please Note: Pith helmets can be immersed in water, whereby the wearer stays cool during use on hot summer days. Please submerge the outside of the helmet carefully, without allowing water to spill into the interior of the helmet. Approx. 5" Crown 2" Front Brim 2 1/2" Back Brim 2" Side Brims Made of: 100% Genuine Pith Handmade Cotton Twill Exterior Composite Leather Decorative Strap Size Adjustable Inner Harness Cotton Poplin Lining Lightweight Dunk in Water to Keep Cool Sizes: S/M fits up to size 7 1/8 (M); L/XL fits up to size 7 5/8 (XL); adjusts via a hook and loop ending to the interior sweatband. For Bulk/ Wholesale Purchase of this hat, CLICK HERE or call us at 1-888-847-4287. |
Close
|
Wool Fashion Beret |
---|
Made of 100% wool, Village Hat Shop brings you the timeless Wool Fashion Beret in a wide assortment of colors. Sleek and simple, this seamless wool beret is topped with a small tonal tassel. Wear it tilted to either side of your head, centered or towards the back - the Wool Fashion Beret adds a touch of effortless French flair to your look! Approx. 11" Diameter Made of: 100% Wool Center Top Tassel Unlined Packable / Crushable Soft Size: One Size Fits Most - Fits up to size 7 1/8 (M) comfortably. For Bulk/Wholesale purchase of this hat, CLICK HERE or call us at 1-888-847-4287. |
Close
|
British Wolseley Pith Helmet |
---|
Please Note: Due to the handmade nature of Pith Helmets, be advised there might be minor imperfections in the construction of the hat. These imperfections do not hinder the look or wear of the helmet. Made in Vietnam This pith helmet style is reminiscent of a classic fireman's helmet. The helmet was named after M/Gen. Sir Garnet Wolseley, who developed the original pattern. We have seen many variations on the name...Wolsey, Wolesley, etc., but the correct spelling is Wolseley. Through the years there have been many minor variations to this style. Please Note: This pith helmet can be immersed in water, whereby the wearer stays cool during use on hot summer days. Please submerge the outside of the helmet carefully, without allowing water to spill into the interior of the helmet. S/M Helmet - Approx. 4 1/2" Crown 3" Brim - Front 2 1/8" Brim - Sides 3 1/8" Brim - Back L/XL Helmet - Approx. 4 1/2" Crown 3 1/4" Brim - Front 2 1/4" Brim - Sides 3 1/4" Brim - Back Made of: 100% Genuine Pith Handmade Cotton Twill Exterior Composite Leather Decorative Strap Size-Adjustable Inner Harness Contrast Cotton Lining (Green or Brown) Lightweight Dunk in Water to Stay Cool Size: S/M fits up to size 7 1/4; L/XL fits up to size 7 5/8; adjusts via a hook and loop ending to the interior sweatband. For Bulk/Wholesale purchase of this style, CLICK HERE or call us at 1-888-847-4287. |
Close
|
Golf Ball Hat-Tac |
---|
FINAL SALE Made in the USA Never again worry about your hats becoming misshapen, sagging, or losing their curve, thanks to the Golf Ball Hat-Tac. This revolutionary invention sticks to any surface thanks to the 3M foam adhesive backing, and the fixed curve platform allows hats to comfortably rest in an upright position. With this patented and trademarked design, your ball cap, fedora, or any other piece of headwear will never lose its curve. This is the perfect place to hang your hat! Approx. 45.5 mm High 97 mm Wide 50 mm Deep Made in the USA 3M Foam Adhesive Backing Fixed Curve Platform Golf Ball and Putting Green Print Sturdy and Reliable Works for Hats of All Sizes Manufacturer Instructions for How to Apply: * Prep surface: Take a soft wash cloth with Isopropyl or similar alcohol cleaner to create a nice clean surface for the HAT-TAC™ to stick onto. Our recommendation is to find a smooth clean surface with little texture. * After prepping the surface: Grab the tab sticking out and peel away the red backing with ease. HAT-TAC™ attaches to the wall using a foam medium hold double sided adhesive. * Position: Align your HAT-TAC™ a few centimeters off the wall, making sure to the top so is perfectly level. * Last step: Push softly, just enough to hold the HAT-TAC™ in place on the surface. Take a few steps back to make sure it is exactly where you want it positioned. If the positioning is perfect, push and hold the back side of the HAT-TAC™ to the wall firmly for 30 seconds then wait 30 minutes before hanging a hat. Manufacturer Instructions for How to Remove: * Step One: Firmly grab each side of the HAT-TAC™ with both hands. * Step Two: Slowly wiggle the HAT-TAC™ up and down to separate the adhesive back from the wall. Be careful during this step as removing too fast or incorrectly could peel paint. FINAL SALE |
Close
|
Stampede String Chin Strap |
---|
Made in the USA Hold on to your hat! Chin cord/straps, known in cattle country as stampede strings, ensure against the loss of your hat in wind or brush. The Stampede String Chin Strap isn't only for ranchers working cattle on the open range. Anyone who wants to keep their hat from blowing away will find it useful. Featuring a sliding knot that joins together two, four plait braids of leather, this chin cord/strap is practical and looks great! How it works: Two cotter pins slide between the sweatband and the hat body. Once bent, they provide a secure attachment of the stampede string. Approx. 19" Length (Excluding End Pins) Made of: 100% Kangaroo Leather Sliding Knot Four Plait Braided Leather on Each String Size: One Size Fits Most Manufacturer Instructions for Use: * Hold the cotter pins tightly together and push them through the stitching where the sweatband meets the body. * Pull the pins completely through the base of the sweatband until the braid is firmly against the sweatband. * Spread the pins outward, as close to horizontal as possible. * Check by tugging on the braid. |
Close
|
British Foreign Service Zulu War Pith Helmet |
---|
Please Note: Due to the handmade nature of Pith Helmets, be advised there might be minor imperfections in the construction of the hat. These imperfections do not hinder the look or wear of the helmet. Made in Vietnam This pith helmet is designed to be an historically accurate replica of that worn by the 24th RoF in the Anglo-Zulu War of 1879. It is a real pith helmet, handmade one hat at a time. Thanks to the reenactor groups who have helped with this design. These "Living History Units" have added that the Pith Helmet is also known as the U.S. M1881 Summer Helmet. Please Note: Pith helmets can be immersed in water, whereby the wearer stays cool during use on hot summer days. Please submerge the outside of the helmet carefully, without allowing water to spill into the interior of the helmet. Approx. 5 3/4" Crown 2 3/4" Front Brim 3" Back Brim 1 3/4" Side Brims Made of: 100% Genuine Pith Handmade Cotton Twill Exterior Composite Leather Decorative Strap Size Adjustable Inner Harness Cotton Poplin Lining Lightweight Dunk in Water to Keep Cool Sizes: S/M fits up to size 7 1/8 (M); L/XL fits up to size 7 5/8 (XL); adjusts via a hook and loop ending to the interior sweatband. For Bulk/Wholesale purchase of this hat, CLICK HERE or call us at 1-888-847-4287. |
Close
|
Cotton Twill 3-Pleat Puggaree Hat Band - Khaki |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a multitude of great colors, the 3-Pleat Puggaree Cotton Twill Hat Band by Village Hat Shop will give a fresh new look to your favorite hat. For best results, please follow all instructions for use (below). Approx. 28" Total Length, End to End 2" Width Made of: 100% Cotton Twill 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Poly Mesh Mustache Hat Sizer Pack - Black |
---|
Please Note: 1 pack contains 2 individual mustache hat sizers. Find yourself in-between hat sizes? Want your hat to fit your head a big snugger? Prefer the added comfort of a cushioned sweatband? All can be achieved with the Village Hat Shop's own Poly Mesh Hat Sizer Pack that helps size your hat down by 1/2 a size. Feels as cushioned as a pillow and available in black for your convenience. For best results, please follow all instructions for use (below). Instructions: * Peel off the backing from the sizer. * Stick to the front section of the hat's sweatband or whatever area the hat has a loose fit (front, back or sides). You can also place the sizer behind the sweatband, directly onto the hat, or onto the backside of the sweatband. * Discard the used strip when soiled and replace. Approx. 8 1/2" Length 2" Height Made of: 100% Polyester 2-Pack of Mesh Hat Sizers Size(s): One Size Fits Most - 1 pack contains 2 individual hat sizers. For Bulk/Wholesale purchase of this item, CLICK HERE or call us at 1-888-847-4287. |
Close
|
Cotton Twill 3-Pleat Puggaree Hat Band - Navy Blue |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a multitude of great colors, the 3-Pleat Puggaree Cotton Twill Hat Band by Village Hat Shop will give a fresh new look to your favorite hat. For best results, please follow all instructions for use (below). Approx. 28" Total Length, End to End 2" Width Made of: 100% Cotton Twill 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Fez Tassel |
---|
With the great assortment of color tassels from the Village Hat Shop, you can now fancify your fez and switch up the fun with your favorite hat! Approx. 11" Long Made of: 100% Polyester |
Close
|
Printed Cotton Bandana |
---|
FINAL SALE The bandana has been worn by almost everyone at some point in time. This simple piece of fabric can change a person's look in 10 seconds! This 21 1/2" x 21 1/2" square is great as a handkerchief, bandana, face mask, or scarf. Approx. 21 1/2" L x 21 1/2" W Made of: 100% Cotton Patterned Bandana Square Size: One Size Fits Most. FINAL SALE |
Close
|
Genuine Government Issue Wool Watch Cap |
---|
Made in the USA This watch cap (also known as a beanie) is NOT the cheap acrylic cap that you find around. Instead, this is watch cap is made to the specifications of the USA Department of Defense. The design, the material, the knitting quality and stitches per inch, the colorfastness, the finished weight, are all as per the USA military requirements. Approx. 9" Height - Flat 6" Width - Flat 3" Cuff Made of: 100% Wool Made in the USA Double-Wall Construction Cuff - Wear Folded Up or Down Size: One Size Fits Most - Stretches to fit up to size 7 3/4 (XXL). For Bulk/Wholesale purchase of this hat, CLICK HERE or call us at 1-888-847-4287. |
Close
|
Cotton Twill 3-Pleat Puggaree Hat Band - Black |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a multitude of great colors, the 3-Pleat Puggaree Cotton Twill Hat Band by Village Hat Shop will give a fresh new look to your favorite hat. Approx. 28" Total Length, End to End 2" Width Made of: 100% Cotton Twill 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Solid Cotton Bandana |
---|
FINAL SALE The bandana has been worn by almost everyone at some point in time. This simple piece of fabric can change a person's look in 10 seconds! This 21 1/2" x 21 1/2" square is great as a handkerchief, bandana, face mask, or scarf. Approx. 21 1/2" L x 21 1/2" W Made of: 100% Cotton Solid Bandana Square Size: One Size Fits Most FINAL SALE |
Close
|
Cotton Twill 3-Pleat Puggaree Hat Band - Red |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a multitude of great colors, the 3-Pleat Puggaree Cotton Twill Hat Band by Village Hat Shop will give a fresh new look to your favorite hat. For best results, please follow all instructions for use (below). Approx. 28" Total Length, End to End 2" Width Made of: 100% Cotton Twill 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Cotton Twill 3-Pleat Puggaree Hat Band - White |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a multitude of great colors, the 3-Pleat Puggaree Cotton Twill Hat Band by Village Hat Shop will give a fresh new look to your favorite hat. For best results, please follow all instructions for use (below). Approx. 28" Total Length, End to End 2" Width Made of: 100% Cotton Twill 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
USA: 1-888-VHS-HATS (1-888-847-4287)
INT'L: +1 619-906-4440 Se habla español
Shop for Hats at VillageHatShop.com | Privacy Policy | Website Accessibility | Site Map
Copyright © 1999-2020 Village Hat Shop: The #1 Source for Hats Online
*ALL SPECIAL OFFERS AND DISCOUNTS
Excludes wholesale/B2B, Certain Brand Restrictions, Special Orders or Where Otherwise Noted.
CONTACT USWe are happy to help! |
1 (888) 847-4287Mon-Sun 8am-4:00pm |